Case for ESP8266 board and DHT12 sensor
ESP8266 and DHT12 Case
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 165
- Likes
- 42
- Rating
- 4.8
355 models
ESP8266 and DHT12 Case
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
Iron Holder Addon for Quicko T12 Soldering Station with Battery Pack Makita 18V, see this Model . Took the idea and basic holder from here and modiefied it for my needs. The holder is glued to the Quicko solderung station. The hot iron…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Stopping plates for T12 soldering station under desk hanger I found these pretty under desk hangers from maco2229 which I wanted to use. But my KSGER T12 soldering station's and SMD rework station's face plates are flush with the rest of…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
I wanted to mount stuff to the top of my Radiomaster MT12 radio, either for filming and being able to operate the controller two handed (it takes practice!!) or just to mount an FPV screen. Or maybe both??!! Hey, I'm just providing…
Print approx. €2.81–€3.44 excl. taxPreliminary estimate for one variant
Inspired by some of the battery-powered soldering stations already out there ( particularly Callingall's ), I created my own version from the ground up. INSTRUCTIONS : Click here. Includes info on parts required, how to print, and how to…
I once ordered a set of 10 different T12 soldering tips (from here or here ) and had them laying around since then. So the idea came up to design this stand and optional cover for it. Prints without support. Also the cover! It's…
Halfway through the print pause your printer and add 1-2 small spit shot weights to make the rattle inside. Once printing complete add three small split rings and two treble hooks. Happy catching!
Easily printable extender for Quicko T12 microsolder and its other clones of the same size, which allows this microsolder to be elegantly operated on batteries designed for Makita or Parkside hand cordless tools, which is useful not only…
This allows you to put the ASUS ZenWiFi Pro ET12 on the wall. It is designed for the ET12 to drop into the wall mount and the ET12 will not move around. There is enough space in the back for cables. Print Instructions: Print strong in…
Plugs the arbor hole that spews dust everywhere. This is a loose fit meant for easy install and removal: 1. Insert the tab on the left. 2. Line up the tabs on the top and bottom. 3. Mallet time! (on the right) Print in PETG so it'll be…
Storage case/box for T12 soldering iron tips. 5 and 11 tip versions. Integrated lock using bump and grooves each side.
Under table mount for KSGER T12 2.1 Soldering Station (with aluminum case). Mount contain tray for T12 10 pcs tips. Printer settings: PLA filament 0.4 mm Noozle 0.2 mm quality no support required Category: Tool Holders & Boxes
Compact and handy case for storing 7 pieces of Hakko T12 soldering iron tips. Added a hole in the lid to allow air to escape when closed and no closed piston effect. Thanks to XakVolt from 3ДТудей for the initial idea. The dimensions and…
Use caution if you make one of these as it could potentially over discharge your battery, be mindful of the charge left on the battery to avoid damage. I had the need for a portable soldering station, but I really didn't want to carry…
I designed it in two parts so you can always design a different “wall” mount and just snap the router mount in place. The router mount itself is not too tight so it should be easy to mount the router in. It prints with no supports. I…
T12 Soldering Iron Stand / Holder A simple and practical soldering iron stand designed for T12 soldering stations , specifically for the popular T12-907 soldering iron handle . 🔧 3-Piece Design The model consists of three separate parts:…
Updated 07/09/2022 A bracket has been added for use on ikea skadis or similar murals. ********************** First I want to thank the user JAAANIK for his cool design "PARKSIDE X20V TEAM KSGER STM32 OLED T12 PORTABLE SOLDERING STATION"…
The box is printed in two parts but doesn't need any support, assembly or cleanup afterwards. Insert the soldering iron tip at an angle and then lock it into place by pushing it upright. It should click into place.
This is a bin to store up to five T12 soldering tips 4 x 1 x 2 Units in size
A simple stand for cheap aliexpress T12 soldering station with wire tip cleaner and tip holder. I needed a compact holder for my soldering station beacause my workshop space is quite limited ... in fact it is a kitchen table ... the…
So far i'm really pleased with my Radiomaster MT12. However, i generally don’t appreciate the small steering wheels that are standard on most pistol style transmitters. So i designed a 12mm hex adapter shaped like a slotted and drilled…
Designed this Ikea Skadis compatable holder to organize some spare T12-sized soldering iron tips. It holds up to 5 spare tips with a satisfying click, this fit could be a bit tight for some, but that is nothing a bit of sanding paper…
Accessory that allows safe usage of T12 tips in Pinecil V2 soldering iron.
This is the Cutter Gear for HP Designjet Plotters like T120, T125, T130, T520, T525, T530, T730 or T830. This was remixed from original at Thingiverse by ripetomatofetish for better fit on the cutter case. I remixed the stl on Sketchup,…
Case for 6pcs Ksger tips STEP file included
Remixed the awesome TS100 Soldering Iron Ryobi by rkolibar to encase a T12 Hakko soldering station DIY kit. Borrowing also from Quicko Mini STC T12 Panel I was able to combine them into an all-in-one soldering station. The holder was…
ARTE&DISIGN GT127 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Simple under desk mount with screw hols to mount your GL-SFT1200. The small holes ( to be screwed in are 3 mm ) and the bigger once are 12 mm for easy tool access. I printed mine in PLA to get it a bit more ridged. 0.6 mm nozzle and 0.3…
I have several T12 tips laying around so I've created case for them. The hinge is fitted with 1.75 filament piece so no screws/metal rods are necessary. The locking mechanism is a little bit larger (the tip of it) so you can cut it down…
Opal mount with a clip to hold the router in place.
T12 Soldering iron tips stand. Holds 13 tips and also takes the TS100 portable soldering iron tips among others Category: DIY
Adapter to seat T12 soldering iron tips into the Pinecil. Depending on the brand of your T12 tip and how hot you run your iron, you should consider using a high temperature filament. I ran my Pinecil at 320 Celsius for a hour using a…
This is a remix of Rixis T12 Solering Iron Tips Stand & Case printable on Voron V0. The cover was shortened in length to fit into the 120mm space of the Voron V0 and the edge at the base was adjusted accordingly. Since Rixi was kind…
This mount is detachable. Made it so I could mount the soldering unit to my bench and quickly remove it if I need to work somewhere else. The bands are just thin enough that the rubber feet on the bottom of the soldering station will make…
No support needed. You only need support for V2 Recommend TPU95.
Somebody that was definitely not me blew up the MOSFET in the pinecil by pushing a t12 tip all the way in. Luckily it was an easy repair. This part prevents the tip from going too deep. Print with the curved side up. Print Settings…
Some time ago I bought a FSN guide rail but did not realized that there is no adapter to use my GST12… so I made one. I had problems printing this thing in a horizontal position (I think Prusa slicer had problems creating correct…
Use your favorite steering wheel that is compatible with Sanwa radios on the Radiomaster MT12!
Front panel for installing the T12 STM32 soldering station controller into the aluminum case of the T12 STC controller. For case size 38x88mm. Category: DIY
Low-cost but high-performance portable wireless soldering station powered by Makita 18-volt battery. This soldering station uses a clone Hakko T12 controller, which is extremely good for the price. It can heat up to 320 degrees within 30…
This is my second attempt so build a portable soldering station for the makita LXT 18V battery environment. I improved the old version a little bit. It's still not perfect, but it works for me. There are some new features: ON/Off switch…
Holder for a pocket multimeter UT123T UNI-T. It uses two universal pegs ( https://www.printables.com/cs/model/635620-skadis-skadis-universal-peg) to mount to Skadis so no need for supports. I printed using PET-G. Can be used while mounted…
Fiat 124 (1976) / Murat 124 – STL release Single-piece, watertight mesh. Scale as needed in your slicer (STL has no units). Feedback welcome.
A small case for Hakko T12 soldering station clone. This is for 8 segment version not OLED with the JST-XH connector on the back. At the moment my printer is not in the best shape so the print quality is not too good. Soldering of the…
+++ IMPROVED VERSION: https://www.printables.com/de/model/409700 +++ This is my attempt so build a portable soldering station for the makita LXT 18V battery environment. You will need the following parts: KSGER STM32 OLED V2.01…
This is a small holder that will store 12 x T12 solder tips at an angle. Print on the side for the strongest connection between the base and the holder. Holes have a 10% tolerance and fit the T12 tips perfectly at .4mm in PETG.
I bought an KSGER controller and a 24V/75W power supply to make this DIY soldering station. The PSU is a bit bit, probably I re-create the thing with a smaller PSU so the case can be made smaller (it can be made smaller with this PSU too,…
Holds 18 T12 or T15 Soldering Iron Tips and spins on the base with a 608 bearing The bearing might be tight, but should fit with some force. I printed these at draft settings, 0.3mm layers no supports Print Settings Printer Brand: Prusa…
Update 9/6: Found the sweet spot for printing this at an angle. I have added a new 3mf file with the exact orientation i printed at. Bambu Slicer gives a angle of 59 degrees for the Y axis. I also changed to glass infused ABS and it has…
I made this part to protect the internal pinecil components from accidental damage due to inserting T12 tips too deep. Printed in PETG with paint on supports under the front overhang.
This is T-12 soldering station module for Tiny E-Lab: https://www.thingiverse.com/thing:2999383 Electronic inside: QUICKO T12-942 BoM: 1x QUICKO T12-942 1x ON-OFF Rocker Switch (21x15mm) 1x XT60 connector male 1x XT60 connector female…
This has been updated to a newer version with some parts lists. https://www.printables.com/model/194318-quicko-ksger-hakko-t12-clone-soldering-station Of all the good designs out there for Hakko T12 soldering iron clones I liked buildxyz…
I made some adjustments to this thing https://www.thingiverse.com/thing:2817296 to fit my Quicko Soldering station board to. I wanted my connector to sit flush to the PCB so I inset the spot for the split ring to sit in the face, there…
This is a 3D model of the HAKKO T12 soldering station ( Aliexpress.com ), which is powered by a Makita battery. You will need M4x10mm screws on one side and M5x30mm screws on the other side. Printing with supports, Infill: 50%. Share your…
Yet another case for t12 OLED soldering station module. This one is for the KSGER 2.1S module, 1.3" OLED, the one which has the handle connector separate from the module board. Small and compact, with hole for 14mm diameter switch, xt60…
adapter for using T12 tip on pinecil, with knurled grip. use it along with pinecil mosfet saver from chestwood96 for double protection https://www.printables.com/model/97073
Inspired by Collingall 's milwaukee-m18-t12-soldering-station This is a T12 Soldering Station for the 18v SP Tools battery packs I got one of these from eBay 24V/70W T12 OLED Screen Soldering Iron Tip Station Temperature Controller board…
Print orientation - look at photo. With minimal supports.
A rather large box made for a wroom32 ESP32 dev board together with a 1.8 inch TFT display at 128x160 pixels. The box is big enough to use breadboard cables to connect the screen to the ESP. Grooves for miroswitches 6x6mm on the sides.…
The white bits are replaceable parts in case they get burnt, they need some supports.
Krabicka pro pajeci stanici z Aliku . Tiskne se na vysku, posazene na zadni stranu. V pripade potreby k dispozici link pro upravy - onshape . Velikost vnitrniho prostoru 122.6mm x 90mm.
English: this is the top part of a mobile soldering station with the T12 (item STC-T12) what you need: a makita 18V battery, makita battery mount with Makita adapter piece 6438386 T12 soldering kit with PCB and soldering iron a switch for…
If you need a solid soldering stand for your TS100, TS101 or Pinecil, have a Search for “t12 soldering stand” or in German: T12 Lötkolbenständer at the usual shops: Examples: https://www.amazon.de/dp/B09JSQTW8N/…
I decided to remix my own design and make it cleaner and more convenient for me by integrating a battery adapter to use the DeWalt 20V ecosystem since I have a bunch of them. This way I've got portability when I need it. One of the things…
User thiagohsz did an exellent job creating a casing for a DIT T12 soldering station. However, my T12 controller has a slightly smaller OLED screen, a 0.96 inch one. I adapted the original design of thiagohsz to accept my controller and…
Holder for 10-12 soldering tips (T12). Feet for vertical or horizontal.
Corner connectors for the ISOLED SURF12 FLAT aluminum profile. The profile is available from various retailers in different lengths and 3 colors. (anodized, powder coated white RAL 9010 and powder coated black RAL 9005) The corner…
A nice spice drawer organizer insert for a next125 kitchen. Fits round objects and prevents them from rolling. Fits drawers with 225mm width. 4 insert fit exactly in depth. Also created a short version for a secret hidden space behind. If…
FX Typhoon & T12 Barrel Clamp and Mount with picatiny holder for bipod. Use ASA for best results.
T12 solder station/ soporte estación soldadura
Stand for T12 Soldering Station with Tips Holder Two version: with or without Tip cleaner Added T12 Power Supply Version (not tested, please feedback) Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
Stand for Uni-T UT123T multimeter and its accessories: Sarcophagus stand with rear drawer (for storing the thermal probe and others stuff), probe and test tweezers holder (with a back pocket to store tweezers connectors) and hooks on the…
Here is a solid carbon axle for the GT12 Club Race Hero. You will need a ؼ" carbon fiber tube. A 110mm long tube will give a 172mm track, you can cut it a little shorter. To secure the wheel to carbon tube you need a M3 nut and grub/set…
Missing part for this awesome portable tool. Printed in ABS with fuzzyskin 0.16/0.16 layer 0.16.
I made the bottom holes closed by adding a 3mm thick bottom to them so they wont fall out when you move the holder or whatever it is attached to. I mounted mine on the back of my iron stand so without this they would fall when I picked up…
I recently bought the thinner, more ergonomic soldering iron handle for my T12 soldering station, that didn't fit good into my soldering iron stand. Therefore I made this adapter that holds it correctly in place. After printing, the…
I wanted a way to attach my travel router to the telescope mounting plate for Astrophotography. With the powerbox the only cable that needs to leave the scope is the one power cable and all other cables are contained neatly on the scope…
You can connect the parts with a piece of filament. The sealing ring should be printed from TPU or Flex.
Adapter um T8 Leuchtstoffröhren in T12 Aufnahmen mit Schraubkappen zu verwenden und gegen Feuchtigkeit abzudichten. Zudem ist noch (bei Bedarf) ein passender O-Ring zur Abdichtung gegen Feuchtigkeitseintrag zwischen der T8-Röhre gegen das…
This is an adaptor and case to run an STC T12 soldering iron kit from a Black & Decker 20V MAX battery. It uses a soldering iron controller kit commonly available for about 15 USD on EBAY. It uses the kit with the 3 digit 7 segment led…
The original holder for my T12 soldering iron is loose - at best - and I figured a suitable PETG replacement would do the job. So far so good, but maybe ABS/ASA+ is even better for heat resistanse. Snug fit for the KSGEG T12 handle with…
Need a wall holder for my Vizio XRT122 universal remote, so my kids would stop losing it. Printer Settings: 0.4 nozzle, 0.20mm with 4 walls (but doesn't really matter)
Original design has cracked and I've made this a much beefier model. But I don't recommend this or similar designs, because you can easily break bottom tip which is not made solid Print Settings Printer: Anycubic Chiron Rafts: No…
Side pods, bushing for the club racer hero plus and modified rear and top pods from Simon Britton with some added fastener clearance. I printed this on my Bambu Lab with the 0.4mm nozzle and it came out great. Used a high temp material…
BOM: 1x T12 Soldering Station Kit 1x 120x120x20 Fan 12V 1x 120x120x10mm Carbon Filter 1x Makita Adapter Battery 4x M3 Heat Insert 4x M3x25mm Screw (Mount Fan) 2x M3x20mm Screw (Mount Top and Bottom Part) 2x M3x8mm (Mount Top and Bottom…
This is the cheapest way to get affordable solder (approx. 15 EUR). You can buy the kit here ( aliexpress.com ). Once the kit is in place, you can print the box with the stand. Insert the solder PCB board into the box, the opening in the…
Allows to mount the router sideways on a DIN rail. (Here used together with DC power supply and relay to power Starlink antenna) Uses M3 socket screws
My pipe got broken and dyson didn't have stock for replacement, so i made mine. i printed with MK3S, PLA, 100% infill, 0.1mm, organic support
3D Printable case for the CNC Kitchen T12 Heat Set Insert Soldering Iron Tips. Fits the Insert Extractor V2 (not the V1). Compatible with: (GLOBAL - shipped from Germany)…
.step file is included Required the hardware from the photos
Here's my idea of adding external power supply to KSGER T12 station. It uses one XT60 socket and a TO-220 30A 40V dual barrier diode.
Here's a completely over-engineered T12/T15 soldering iron tip holder. It can be wall mounted to hold tips in either a vertical or horizontal orientation. The round, enclosed portion of the holder flexes outward to make inserting and…
Re-mix for 10 tip storage. New quick remove lid and stacking option. Shrunk to 10 tip storage. Added angle and notch to lid slots on base. New notched for one third movement lid with angles, added text and pattern. Added text to case and…
Space-saving stand for a T12 soldering iron
Design requires disassembly of power supply and modification - disconnection of input path on PCB and connection of wires to switch. Dangerous voltage on power supply board, do not make unless you allowed to work with 230 V AC voltage and…
So I originally made this so I could attach magnets to the case and allow it to mount to rack mount cases (using custom blanking plates with magnets as well). You can also mount this to the wall if need be. The tight is fit and you might…
Just some simple 43mm Hornby track spacers for laying track This example was printed in PETG as its what I had loaded at the time but should be fine in PLA PLA 0.2 Layer No supports Print as orientated with text on the plate