Search results: t5

Sort order

1,240 models

P
PrintablesMehTechArt

Mustang Shelby GT500 Wall-mounted

Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…

Print approx. €10.90–€13.32 excl. taxPreliminary estimate for one variant

Downloads
3,004
Likes
816
Rating
5
P
PrintablesMehTechArt

Mustang Shelby GT500 Wall-mounted

Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…

Print approx. €9.80–€11.98 excl. taxPreliminary estimate for one variant

Downloads
988
Likes
373
Rating
0
P
PrintablesIvo Slanina

Samsung T5 SSD Laptop Lid Holder

I recently bought Samsung T5 SSD external drive for video editing. It really annoys me to have this thing laying on my table so I designed simple holder to clip the drive on top of my laptop lid. This version is designed for 9 mm thick…

Print approx. €3.46–€4.22 excl. taxPreliminary estimate for one variant

Downloads
632
Likes
82
Rating
3.67
P
PrintablesMichaelQ

Stromer Mudguard Extension V9 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
349
Likes
29
Rating
4.71
P
PrintablesMehTechArt

Mustang Shelby GT500 Wall-mounted

Please click if you appreciate my work :) Raw power. American legend. The Shelby GT500 on your wall. This 3D printable wall-mounted model of the Ford Mustang Shelby GT500 captures the essence of muscle car performance – long hood,…

Print approx. €11.17–€13.66 excl. taxPreliminary estimate for one variant

Downloads
261
Likes
94
Rating
0
P
PrintablesMichaelQ

Stromer Mudguard Extension V8 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
243
Likes
22
Rating
4.5
P
PrintablesMichaelQ

Stromer Mudguard Extension V10 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
219
Likes
20
Rating
0
P
Printablesscrypt

Ethernet Cable Comb (Cat5e)

After lots of versions, I think I have made a nice cable dresser. Designed for Cat 5, may need to be slightly scaled up for Cat 6 and beyond. Directions (if you really need them) Print two at a high infill for strength. Put them together…

Print approx. €4.29–€5.25 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
19
Rating
4
P
Printablesxiphmont

Earcup pivot for Fostex T50RP

Fostex T50RP headphones are very tough, but one place many fail is where the adjustable headband mounts to the ear cups using a pivot. The metal headband rods can twist themselves loose from the pivot and the cup will fall off. Left in an…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
117
Likes
8
Rating
0
P
PrintablesMichaelQ

Stromer ST3 / ST5 Battery Cover Holder

It has always been impractical that the battery cover of the Stromer ST3 or ST5 does not remain closed when the battery is removed. With this holder, you can now keep the cover closed. And if it's not holding the cover, you can stow it…

Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
10
Rating
5
P
PrintablesRoby

BIGTREETECH PITFT50 V1.0 + Raspberry PI 4 + low feet

I redesigned the LCD & Touchscreen front panels for my printer made at home and I modified them to be fitted on my Prusa MK3S also. The LCD & Touchscreen support will mount using the same screws of the original, but be aware that you need…

Print approx. €2.04–€2.50 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
17
Rating
0
P
PrintablesAlex

volkswagen transporter t5 vw secure load plastic piece

Just a deeper version of the piece: 7H08634679B9

Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
13
Rating
0
P
PrintablesJay Nimbus

Gear Knob (Mazda BT50)

Printed with PETG due to in-car use. Seems to work fine. USE FUZZY SKIN mode to get nice grip texture. Use adaptive layers to get nice smooth top contour. Standard supports used. The screw sometimes comes a little loose, so I'd recommend…

Print approx. €2.26–€2.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
69
Likes
4
Rating
0
P
PrintablesAlvomane

Pacoone Tiny Air Pump Forclaz Trekking MT500 Air Mattress Adapter | Luftmatratzen Pumpen-Adapter

This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
51
Likes
10
Rating
5
P
PrintablesMichaelQ

Stromer Mudguard Extension V12 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
6
Rating
5
P
PrintablesMehTechArt

Mustang Shelby GT500 Keychain

Please click ❤LIKE❤ if you appreciate my work 😊 An American icon… in your pocket. This 3D printable keychain inspired by the Mustang Shelby GT500 features a sleek, flat side profile of the legendary muscle car. Minimalistic yet instantly…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
6
Rating
0
P
PrintablesMHX3D

Prusa MK4 PiTFT50 Display

Display for MK4 printer that I use with Octoprint or Repetier Server Material needed PiTFT50 Display…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
43
Likes
16
Rating
0
P
PrintablesMichaelQ

STROMER ST3 ST5 - Stem Mount Inlet Plate for Original Garmin Oregon Bike Mount - Fixed Angle

The model is designed to mount an original Garmin Oregon Bike Mount on a STROMER ST3 or ST5. It uses the provided stem cover and fits on both stems (Sport and Comfort). The connector parts are not necessary, but they prevent a rotation on…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
0
Rating
0
P
PrintablesNovohradecak

Řidič Renault5 Monti System

Řidič Renault5 Monti System ********************************** Postavy jednoho nebo dvou řidičů do kabiny. Vlastní úprav a tvorba. Soubor obsahuje 5 druhů. (Policie, řidič s brýlemi, řidič Elvis Presley s brýlemi, řidič s helmou, řidič…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
0
Rating
0
P
PrintablesKalle

Inrico T522A Stand

Da das Inrico T522 manchmal recht wackelig ist habe ich mir diesen einfache Stand konstruiert. Es wird in die beiden Führung geschoben. Um es einfach zu halten wird an der Schlaufe ein Haushaltsgummi befestigt und einfach nur über den…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
PrintablesArnomachal

Support de compteur PZRacing ST500 pour Kawasaki ER-6n

Ce modèle est un assemblage de 2 modèles : "PZRacing Start ST500 Laptimer Mounting Bracket for Yamaha R6 RJ27" de Knorrf1x sur Printables "Support d'indicateur de vitesse pour Kawasaki er6n" de Keep3r sur Makerworld Compatible avec :…

Print approx. €3.80–€4.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6
Likes
2
Rating
0
P
PrintablesPeter Farell

Fallout T51b Power Armor Helmet.

Fallout T51b Power Armor Helmet.

Print approx. €12.40–€15.15 excl. taxPreliminary estimate for one variant

Likes
44
Rating
0
P

Ford Shelby Mustang GT500 'Eleanor' Kit Card (known from 'gone in 60 seconds')

This model has been nominated for the Printables Awards 2024 in the category 'best 3D Model in Multi-Material Design'. Thank you for your votes! Summary This is a model of a Ford Shelby Mustang GT500 'Eleanor' in a kit / gift card style.…

Downloads
12,378
Likes
2,199
Rating
4.97
P

VW T5 Transporter / Multivan Bus Kit Card

Summary This is a model of a VW T5 Multivan (Facelift) in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but…

Downloads
4,041
Likes
493
Rating
4.83
P
Printables3DPrintables

Ford Mustang Shelby GT500

idkFord Mustang Shelby GT500

Downloads
2,720
Likes
418
Rating
4
P
PrintablesPeter Farell

Fallout: T51b Power Armor Helmet - Dice Tower

Fallout: T51b Power Armor Helmet - Dice Tower Removed Old Files. Hole is now 26+MM wide to accommodate dice better. Also the bottom is flat and should need less support. New files called helmetnewa.*** THANKS w3dn3sd4y for the heads up.!…

Downloads
2,231
Likes
794
Rating
4.78
P
PrintablesKen226

Voron 2.4 Touch Screen Housing for BTT Pi TFT50 V2.0

The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…

Downloads
1,965
Likes
326
Rating
4.91
P
PrintablesRamjetX

RamjetX Thrustmaster T300 T500 TX TSPC 70mm Hub Adaptor Kit

Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…

Downloads
1,533
Likes
86
Rating
5
P
Printablesensoniq2k

Magura MT5 MT7 MT8 MT Trail Caliper Cover Decorative Ring Blende

Update 2023: Bought an MT8 and added a fitting for it here. --- You want to customize your Magura MT5/MT7/MT8/MT Trail Calipers without spending a fortune on those expensive plastic rings? Look no further, this model has you covered.…

Downloads
1,391
Likes
106
Rating
5
P
PrintablesMogu1lito

BTT Pi TFT50 v2.1 Screen Mount for Voron Skirts_remix

Just slightly remixed model (https://www.printables.com/cs/model/518519-btt-pi-tft50-v21-screen-mount-for-voron-skirts) cutout for reset button frame is around whole display with cutout for buttons (just remove supports) I used this…

Downloads
1,152
Likes
104
Rating
5
P
PrintablesG33kt3ch studio

T51b power armor files

As promised these are the T51b power armor files that I said I would release after ERRF2023. The pictures shows how we painted this to look like the Nuka Cola power armor. The power armor frame is not getting released yet because I need…

Downloads
1,139
Likes
280
Rating
0
P
PrintablesSteppenpferd

Multivan T5 light cover VW

I designed this in fusion 360.

Downloads
1,090
Likes
53
Rating
4.5
P
PrintablesGa8ri

Ford Mustang GT500 - decorazione parete

Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Ford Mustang GT500 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico…

Downloads
990
Likes
255
Rating
4.33
P
PrintablesKnoddel

TFT 5" holder for Voron 2.4 - BTT PITFT50 V2.1

Update der Display Aufnahme für Bigtreetech btt pi tft50 v.2.1 Das Original Display Halterung ist unter https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/alanho/BTT_PITFT50_v2_Mount zu finden. Der Original Halter für den…

Downloads
952
Likes
67
Rating
5
P
Printablesmt_benno

T51 power armor w/ rifle from Fallout 4 (loading screen pose)

Include two versions of the file one which was ripped straight from the fallout 76 game files and one that's been heavily subdivided using Blender.

Downloads
929
Likes
89
Rating
0
P
PrintablesAlego

TFT 5" holder for Voron 2.4 - BTT 2.0 PITFT50

TFT 5" holder for Voron BTT 2.0 TFT50 this is a remix of ryanwilson's TFT holder. I raised the edge a bit to close the gap in the frame. After printing just break away the bridging bar. For printing please use the original instructions.…

Downloads
911
Likes
113
Rating
4.6
P

VW T5 Parcel Service Transporter Kit Card (AMS / MMU)

Summary Here are 3 variations of a VW T5 Transporter (parcel service edition) in a kit card style. Some characteristic details can be discovered. Everything is based on this model . After printing, the model can be assembled with the help…

Downloads
860
Likes
161
Rating
0
P
PrintablesSINGH DESIGN

Huawei Watch GT5 Stand

Compatible with the new Huawei GT5 watch Enable support before printing

Downloads
819
Likes
44
Rating
5
P
PrintablesChris

VW T5 Bus Schlüsselanhänger Keychain

Schlüsselanhänger ist mit Materialwechsel zu drucken. Keycheain is to be printed with material changes. Schichtdicke 0,10mm / Layer 0.10mm Infill 15 % farbwechsel bei 1.10 / color change at 1.10

Downloads
805
Likes
71
Rating
5
P
PrintablesGrimo

WALL MOUNT SAMSUNG GALAXY TAB A7 (SM-T500)

Wall Mount for Samsung Galaxy A7 with Cable Storage This wall mount is designed for the Samsung Galaxy A7, featuring a convenient space for organizing your charger cable. It is available in two versions to accommodate different 3D printer…

Downloads
686
Likes
33
Rating
5
P
PrintablesAndrew Albert

VW T5 Headrest Coat Hooks

fits on the bars for the T5s head rest. prob works ok with other VW or headrests.

Downloads
652
Likes
56
Rating
5
P
PrintablesJan

Samsung Galaxy Tab A 10.1 (2019)/ T510/ T515 wall mount

I´m looking to mount my Samsung tablet to the wall to manage smarthome app. I designed this model, it is already the third version, in case step file is attached also. It fits on standard junction box KU68 -…

Downloads
638
Likes
33
Rating
5
P
PrintablesBombastus Hands

Makita to Festool Vacuum Adapter DRT50 RT0700

Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…

Downloads
636
Likes
42
Rating
4
P
PrintablesWalli

Twotrees TTS55 / TT55S feets extensions 40 & 130 mm

Whenever you want to have your Twotrees laser engraver higher...

Downloads
613
Likes
36
Rating
5
P
PrintablesLuckyMenace

Magura MT5 MT7 MT8 Caliper Covers (UPD 2024)

As described above - 4 off versions currently. I had better success printing in PETG with textured spring steel sheet, as the PLA did not want to seem to stay stuck - YMML. Updated 12/11/2022 to include ‘Nukeproof’ logo type model…

Downloads
592
Likes
76
Rating
5
P
Printablesmilanvdzanden

T57 Tank

A model of T57 Tank Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 0,3 Infill: 20% Category: Vehicles

Downloads
591
Likes
97
Rating
5
P
PrintablesTitan3D

Cat5/6 Cable Comb

I have a friend that had a need for cable combs for his work. However, his work did not want to buy him and his team 12 of these at $45 each. They reached out to me to design and print a working replacement. I thoroughly enjoyed this…

Downloads
590
Likes
87
Rating
4.67
P
Printableswie_das_geht

Planfräsvorrichtung für Makita RT0700C und Makita DRT50Z

Die Vorrichtung zum Planfräsen wurde während einigen Twitch Streams entworfen, modelliert und zusammengebaut. Sie wird mit einer Kantenfräse Makita RT0700C oder Makita DRT50Z verwendet. Das Planfräsen von Weichen Werkstoffen wie Holz,…

Downloads
588
Likes
182
Rating
0
P
PrintablesMartin Behrens

VW T5, T6, T6.1 Multivan Schuhschrank

Die beiden Seitenwände können gedruckt und anschließend verarbeitet werden. Die beiden Schrauben werden von außen mit Spax verschraubt. Die Löcher in den Ebenen sind so gewählt, dass die Schraube ordentlich Halt hat. Ebenfalls ist es…

Downloads
558
Likes
85
Rating
0
P
PrintablesMikkoP HAM3D

Yaesu FT5D table stand

A small table stand for the Yaesu FT5-DE/DR handheld radio. Have not tested with earlier models, but should fit FT3D at least. Printing: No special considerations, this should be an easy one to print.

Downloads
554
Likes
59
Rating
5
P
Printablesrobbanprintar

VW T5 seat mount covers

I needed something to cover the holes in the floor where you mount the seats. Print with PETG or PLA+. I think PLA could be a bit too brittle for the snap fit to work. Fits my VW T5 Caravelle -12.

Downloads
530
Likes
44
Rating
4.67
P
PrintablesSensha_Vor

T55 AMV MBT

All parts need support Printed using PLA

Downloads
528
Likes
60
Rating
5
P
PrintablesBlueBell_XA

2021 Mazda BT50 / D-Max Cup Holder Inserts

2021 Mazda BT50 / D-Max Cup Holder Inserts Description: If you're the owner of a 2021 Isuzu D-Max or Mazda BT50 and tired of the excessively deep cup holders, these inserts are what you're looking for. Print out these inserts and drop…

Downloads
523
Likes
15
Rating
5
P
Printableswerz 99

Pulley T5 and Timing Belt

Pulley and Rim are fixed with small pieces of 1,75mm filament. Bore is 6mm. I used the pulley on the omron-encoder of my electronic Leadscrew. The belt connects to the spindle of the lathe. See:…

Downloads
514
Likes
48
Rating
0
P
Printables3DPrintDemon

BTT TFT50 Pi V2.1 DSI Touchscreen Klipper Octoprint Sovol Mount SV06, SV06 Plus & SV01 PRO

…Please be sure to hit like & post a make, I'd love to see your prints! UPDATE: Model for BTT TFT50 PI SCREEN V2.1 ADDED!! LATEST VERSION!! IMPORTANT NOTE!!! The newer V2.1 screens have 3 buttons instead of a switch & brightness wheel.…

Downloads
511
Likes
134
Rating
4.75
P
PrintablesShinobu Tezuka

Raspberry Pi Model 4 with BTT TFT50 (2.0 , 2.1) Screen Enclosure

UPDATE: Added the 2.1 version (untested) Designed with air flow in mind this light weight case. M2.5mm stands that came with the Big Tree Tech TFT50 is used in this. If it is missing they are 17mm long. There are 2 M3 size on each side of…

Downloads
508
Likes
68
Rating
5

LAN cable Cat5 Cat6 clip

Easily clip your LAN cables without need of securing them , all files to make your own remixes are in DWG , message me for Rhino files , you can change screw diameter , angles, or redesign it all if you wish (as long as you give me a…

Downloads
500
Likes
58
Rating
5
P
PrintablesStvnLntz

BTT TFT50 v2.0 Case/Housing + Mount (Revision 2)

Housing for BigTreeTech TFT50v2.0 (Revision 2) Pi mounting holes on the back can be used for the mount. (Mount is designed by Simon Vez) Opening for Pi Cam cable. Opening for the brightness wheel. Can also be used without the Back Cover.…

Downloads
492
Likes
50
Rating
5
P
Printablesloserish

BTT PITFT50 V2 Pi4B Enclosure

This is a simple enclosure for the BigTreeTech PiTFT50 V2.0 screen assembly with a Raspberry Pi 4B mounted inside. The BTT mounts into the case with holes for the screw bosses and is secured from the back side with small metric screws…

Downloads
491
Likes
62
Rating
4.75
P
PrintablesWing-Art

VW California T5/T6 Kitchen sink strainer

Sink strainer for VW California T5/T6 This is a remix of the Kitchen sink basket strainer from LoboCNC. I've reconstruct it from scratch to fit to the VW California T5/T6 kitchen. Followed these print instructions: The trick to printing…

Downloads
483
Likes
60
Rating
5
P
PrintablesSensha_Vor

T55 AM-1 MBT

All parts needs supports Printed using PLA

Downloads
481
Likes
63
Rating
5
P
PrintablesChiram

Blast Gate 2" / Sperrschieber HT50

Einfacher Sperrschieber für 2" bzw. 50mm HT Rohre. Bei den bisher gefundenen Sperrschiebern sammelt sich immer wieder Staub im Verschluss, sodass dieser sich nicht mehr ganz schließen lässt. Dieser Schieber ist durchgehend und schiebt…

Downloads
479
Likes
39
Rating
5
P
PrintablesMarc

VW T5 ventilation

2026 09 25 I have created a new version, this time as a paid model. I appreciate your support! IMPORTANT: Before printing, check with the laminator preview that the grid is correct. 2026-05-20 For the BAMBU ecosystem, click on the link:…

Downloads
472
Likes
26
Rating
5
P
Printablesrazgvo.cz

Mustang Shelby GT500 - Kit Card

mustang kit kard, support recommended

Downloads
471
Likes
73
Rating
0
P
PrintablesRelive93

VW T5 Gearshift cover

Broke my gearshift cover. so i reconstructed it in CAD. Printed it with my Prusa Sl1 s.

Downloads
470
Likes
46
Rating
5
P
Printables51m0

Case for LILYGO T5 4.7 inch e-paper

A case for LILYGO T5 4.7 inch e-paper esp32 board, has the space to add a 3,7 Li-Ion cell battery. Print guide Print how is placed in the file, add brim and fill (20/15%). You can choose to add supports (i recommend) or not, but it will…

Downloads
468
Likes
42
Rating
4.5
P
PrintablesMr. Smith

VW Bully T5/T6 - Update Neue Version

Es geht auch anders. Es macht Spaß aus einer langweiligen Vorlage etwas mehr heraus zu holen. Der Maßstab ist wieder 1/43. Ich habe die Felgen und Reifen vom Modell getrennt. Damit man es leichter drucken kann. Die Reifen sind aus TPU.…

Downloads
460
Likes
27
Rating
4.5
P
PrintablesRCO_PDM

VW T5 / T6 Plastic cover cap

Cover cap for a vw t5 or t6 rear fairing

Downloads
450
Likes
59
Rating
4.75
P
PrintablesMaxter3D

OSVAC RT0700 DRT50 Makita Router Katsu Vacuum Plate

If you like the Design leave a like and show some Love ;-) I remixed Thing 4581505 to fit for OSVAC and gave more volume to enable more Dust to pass through. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Filament:…

Downloads
450
Likes
111
Rating
5
P
PrintablesProwlerON

Raspberry Pi Pico case for ADXL345 accelerometer using Cat5e Cable

To use an ADXL345 (possibly similar), and a Raspberry Pi Pico as an input shaper for Klipper systems as a secondary MCU. Programming settings, and wiring were pulled from NERO 3D and the following video:…

Downloads
446
Likes
59
Rating
4.8
P
PrintablesFizzy

FT BTT Pi TFT50 screen mount (Voron Switchwire/2.4)

** Made some edits to the design so you can now use the original M2 screws that come with the screen. I also adjusted the gap between the 2 mounting holes as they did not align 100%. This is a screen mount for the BigTreeTech Pi TFT50…

Downloads
436
Likes
95
Rating
5
P
PrintablesSensha_Vor

T55 AGM MBT

All parts need support Printed using PLA

Downloads
433
Likes
49
Rating
0
P
PrintablesTeo_211

Ford Mustang Shelby GT500 Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Downloads
431
Likes
77
Rating
5
P
PrintablesTs3D
Downloads
430
Likes
73
Rating
5
P
PrintablesMehTechArt

Mustang Shelby GT500 Flat Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 American power – now on your wall. This 3D printable flat-cut wall art model of the Ford Mustang Shelby GT500 brings the raw muscle car spirit into your interior. With its iconic hood and…

Downloads
429
Likes
142
Rating
5
P
Printablesnoti

Lilygo T5 4.7 S3 E-paper display case

This is a case for the LILYGO® TTGO T5-4.7 Inch E-paper display ( https://www.lilygo.cc/products/t5-4-7-inch-e-paper-v2-3 ) together with a stand. Please note that this design is only compatible with the “v2.3” or “plus” variant of the…

Downloads
427
Likes
26
Rating
4.5
P
PrintablesMattas

Magnetic wall mount for Samsung Galaxy Tab A 10.1" Wi-Fi (SM-T580)

Wanted to repurpose my old Galaxy Tab as a home automation display. Noticed that this tablet model has built in magnets on the backside, probably for a flip cover. Mapped the placing of the magnets and made a thin bezel wall mount that…

Downloads
426
Likes
29
Rating
4
P
PrintablesGeddy

Samsung T7 and Samsung T5 SSD Stand(s) - UPDATED

I've decided to organise my SSDs so they would be safe, convenient to use and spaced between if they would ever get hot during the process. The stand I've created originally is made of four parts and accommodates: 1x Samsung T5 SSD 3x…

Downloads
422
Likes
62
Rating
0
P
PrintablesAero

BigTreeTech PITFT50 HDMI 45-degree Mount (for Voron v2.4)

Remix of PITFT50 Mount for the BTT PITFT50 HDMI by CannedBass https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/CannedBass/PITFT50_45_degree_mount BOM: 4x M3 Brass Inserts 4x M3x8 FHCS 2x M3 Hammer(T)-Nuts 2x M3x8 SHCS

Downloads
420
Likes
44
Rating
5
P
PrintablesGrimo

WALL MOUNT SAMSUNG GALAXY TAB A7 (SM-T500) Lewis Version

Inspired by Lewis Version of small 3 piece wall mount for Samsung Galaxy A7 with space for charger cable. Note: Please leave any suggestion or feature requests in comments here.

Downloads
416
Likes
25
Rating
5
P
PrintablesKAYMOST

Open Z V16 🆁Honda NSX 98 GT500 Version 94mm Wheelbase

This 3D printed RC car shell meticulously replicates the iconic Honda NSX '98, offering versatility for printing with both FDM and resin technologies. It is designed to cater to the preferences of RC car enthusiasts who value precision…

Downloads
414
Likes
36
Rating
4
P
PrintablesKythros

Flying T51 Power Armor (Fallout 4)

This is a model of the T51 Power armor from Fallout 4 (model ripped from the game files) mid flight with the intention to use PrusaSlicer 2.6.0's organic supports as smoke from the jetpack! The hands do require supports which I intended…

Downloads
404
Likes
74
Rating
0
P
PrintablesACookA

Magura Quick Reach Adjust MT4 MT5 MT7 MT8

Hey guys, I felt the need for a simple solution to adjust/fine tune the reach of my MT5 brake levers without having to find a 3mm hex and designed this little piece. Fits great on my HC 1-finger levers. Should also fit other Magura brake…

Downloads
399
Likes
39
Rating
4.5
P
PrintablesRobin Dorst

LILYGO TTGO T5 2.13" Case

This is a remix of the thingiverse model with more space for the battery and a few little modifications. Most of the modifications where done in PrusaSlicer and can easily be modified. I also changed the size of the holes for the magnets…

Downloads
381
Likes
27
Rating
5
P
Printablesdtxtr

VW Caddy / T5 / T6 van trunk door standoff for camping / Heckklappenaufsteller

Well. Weekend is one day away and you haven't time to order one of the shiny metal trunk door standoffs to help keep your van from becoming a sauna. So print one. For stability reasons (and support structure hate) the hook gets printed…

Downloads
380
Likes
64
Rating
5
P
Printablesmlee12382

BTT Pi TFT50 v2.1 Screen Mount for Voron Skirts

This is a mount for the v2.1 version of the BTT Pi TFT50 screen for Voron skirts. It is designed copying the v2 mount from alanho in the VoronUsers github. The v2.1 went to 3 buttons instead of a rotary knob for brightness and a switch…

Downloads
379
Likes
40
Rating
0
P
PrintablesPear&Cherry

Door Lock Button and Pin VW Caddy / T5 / T6

Its bit simpler than the original part. So its friction fit on the pin. The button can be printed standing upright. I gave it a (verry) slight sanding and a touch of paint.

Downloads
377
Likes
28
Rating
0
P
Printables3Dspoon

VW T5 T6 Clip Abdeckung Kofferraum

Filament: PLA oder PETG Layer high: 0,2 Support: NO Like the design? Please leave a “like” …. ❤ ….. Feel free to follow me …. ✅ ….. I am glad about every make and a nice review!

Downloads
363
Likes
23
Rating
0
P
Printablesmaschmann

TRCT5000 IR Infrared Sensor Case

Case for TRCT5000 infrared sensors with positioning help. Fits easily and needs no screws. If you want to see the status LEDs, just print the top part with transparent or white filament. Print Settings Printer Brand: Creality Printer:…

Downloads
356
Likes
7
Rating
0
P
PrintablesWhity

Makita DRT50Z / RT0702 Handles

Remix of the “ Makita wrench grip ” by 3dhobbyist21 . Simple redesign of the original ones to not be round but more oval shaped and using the fuzzy skin option in Prusa Slicer (The 3mf file already contains the fuzzy skin modifier). The…

Downloads
348
Likes
84
Rating
5
P
PrintablesMaBaTaBa

VW T5/T6 California - Kitchen Hook

VW T5 / T6 California - Kitchen Hook 7.7.2018 - added 15mm width Print Settings Printer: Multec Multirap M420 2Move Rafts: No Supports: No Resolution: 0.2mm Infill: 35% Category: Automotive

Downloads
347
Likes
23
Rating
5
P
PrintablesWalli

Drag chain mod for Twotrees TTS55 or TT55S

I printed in PLA, any material is ok. Please note than I had to print a new board support in order to move usb cable on the right allowing to put the board on the left. This is needed to shorten the path as much as possible otherwise new…

Downloads
346
Likes
44
Rating
0
P
PrintablesMiKu

VW T5/T6 clip for first aid kit cover

Clip for VW T5/T6 multivan first aid kit cover. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 40 Filament: Prusament PLA Category: Automotive

Downloads
345
Likes
40
Rating
4.67
P
PrintablesWummeke

VW California T5/T6 fridge open thingy

Since I use my California also as my daily driver, the fridge cannot stay open by it's gasspring. Not only will I get a heartattack when the lid slams shut (which will eventually happend during a trip). But it also puts to much stress on…

Downloads
343
Likes
18
Rating
5
P
PrintablesMaBaTaBa

VW T5/T6 California - DualKleiderHaken Handgriff Fahrer/Beifahrer

VW T5/T6 California - DualHaken Handgriff Fahrer Beifahrer Print Settings Printer: Multec Multirap M420 2Move Rafts: Yes Supports: No Resolution: 0.2mm Infill: 20% Filament: Multec PLA-HT Post-Printing ============= Um Kratzer am…

Downloads
343
Likes
37
Rating
5
P
PrintablesSjonny

Beard comb for a Philips beard trimmer model BT5515

A beard comb for a Philips beard trimmer model BT5515. The model replaces the original 0.4-10mm comb.

Downloads
337
Likes
21
Rating
4.67
P
PrintablesThePes76

M3 Tnut for Nut5 Profile (5mm)

my Tnut M3 for 20x20 alluminium profile Nut5 (5mm) Print Settings Printer: Tronxy X5SA Pro Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 100% Filament: Geeetech PLA Blue Category: Household Supplies

Downloads
334
Likes
20
Rating
5
P
PrintablesKiwi Tinkerer

Garmin Alpha 200i / 100 + Collar T5 / TT15 Charging Station

Make Your Own Custom Charing Station using these 3D Printed clips Go have a look at your current charging setup now, I bet the wires are all tangled! I have included designs for a basic charger station that has cable channels on the back.…

Downloads
334
Likes
23
Rating
5

Blast Gate for 50 and 75mm / Schieber für HT50 und HT75mm

Hi, these Blast Gates is for 50mm and 75mm tubes. The four holes have 6mm diameter. Hallo, dieser Absperrschieber ist für HT50 und HT75 Rohre. Die vier Löcher haben einen Durchmesser von 6 mm. Update 10.01.2024 The thickness of the slider…

Downloads
330
Likes
25
Rating
5
P
Printablesrandomlamer

Voron 2.4 BTT PiTFT50 45-degree mount Clicky-Clack Door

45-degree mount for BTT PiTFT50 display to also work with the Clicky-Clack door modification intended for Voron 2.4. Display holder was found here: TFT 5" holder for Voron 2.4 - BTT PITFT50 by Alego | Download free STL model |…

Downloads
326
Likes
43
Rating
5