DJI Mini 3 Pro Spares Container with tabs
Easy to PrintEasy to print. No support needed, stable enough at 20% infill.
- Downloads
- 507
- Likes
- 94
- Rating
- 4.75
359 models
Easy to PrintEasy to print. No support needed, stable enough at 20% infill.
I remixed this model from ermethic to provide tabs to attach it to a wall/ceiling/shelf. Advice is to print it in ASA/PETG/ABS as the Shelly Plus 1PM easily reaches temperatures of 60c.
I liked the idea of having a small handle to move the heatbed without touching the sheet of the bed. But saw that some users had issues with the printing on the side of the original thumb tab. So I wanted just one position to grab the bed…
Echte deutsche Möbel von Hand vermessen und digitalisiert Dieser Kleiderschrank wird definiert von harten Kanten und schlichtem Design. Ideal für ein modernes Diorama Version Massiv Erläuterung Objekt ist innen massiv. Im Slicer erzeugt…
Introduction: This 3D printable binder divider is designed for those seeking a blend of functionality and aesthetic appeal in their organizational tools. The model is easy to print and can be customized to suit individual preferences and…
© Timo Schulz - [Timos Bilder](https://www.timos.pics) **Echte deutsche Möbel von Hand vermessen und digitalisiert** Dieser große Eckschreibtisch bietet viel Platz für Büroutensilien. Selbst und ein Computer mit ein klobigen Röhrenmonitor…
These clips are used to seal your open potato chip bag. Three sizes are available. Because there is a large printing overhang for the tabs, I included tree supports which removed easily.
Magic: The Gathering Commander Deck Cube 100 Card – Keyed Tabs with Magnetic Snap Closure At first glance, it’s deceptively simple - a smooth black base capped with a translucent green shell, perfectly cubic, perfectly balanced. But like…
Designed these to make lining up the build plate easier on my Neptune 4 Max. Not sure if these will fit on different model Neptunes as I only have a 4 max. Both sides mount using stock screws. Parts are tight so some force is required to…
These thumb tabs mount underneath the heated bed. Allows easier removal of the steel sheet in the same way that the MK3 works. Print instructions Must be printed from PETG due to high temps. Part is best printed vertically on one side, no…
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…
Two part print, can be printed in any material. Lower heat filaments might warp in the presence of hot water, probably not dishwasher safe unless done with low temperatures. A lower layer height is recommended to avoid spots for water to…
Added some tabs for the top 2 and bottom 2 holes of the Polymaker spool.
A slim case for the Raspberry Pi Zero (w) and the Pi Zero 2 with mounting tabs and a friction fit lid. There are a few alternate lid designs if you want room for a header and/or heatsink. The regular case and lid work fine on the Zero 2,…
Remix of the Open wall mount with tabs added at the bottom to allow for vertical mounting.
Designed for: LM2596 buck converter (see image)
Make sure the print bed goes on straight every time! Make sure to use supports for the right build tab
Aligning the build plate made easy! Two corner brackets (print more of the standard bracket for the front locations if required), incl. custom fit for rear left on the Elegoo Neptune 4 Pro where the Cable connection lives. Triangulated…
You can print this using whatever you want, I've obtained great results with PLA and TPU. No screw required, increase print to 102% if you use TPU to better and firmly fit into the blade. Buy me a coffee if you want to support me!
Sv06+ Plus Vortex fan with mounting bracket. Printed with PETG 0.2mm line height, supports as needed. Hardware: M3 x 25 tapered for mounting to gantry. used tapered head for this so the hardware doesn't interfere with X-axis calibration.…
I was using JamKo76's Polymaker rings, but the nub/tab was always hard to push in, and the rings were a little too thick to roll smoothly in my AMS. So I trimmed 0.4mm from the base of the ring to make it fit better without affecting the…
This piece works on 2009-14 Kia Sorento, but has been reported to possibly work with 2015 and 16. May work on Hyundai Santa Fe 2014-15. I clipped off the raised center of the vane it fits on. The clips with the tab down and on the right…
RC body clip tabs attach to your car's body clips and makes un-clipping fast and easy Made for my 5 year old son. Inspired by some Rubber clips i had for my own RC-Cars. Made 3 Version 1,5/2&2,5mm. Small versions fitted best for my body…
Little clip-on tabs to help keep papers organized. A glorified bookmark perhaps. Print instructions Best printed in PLA on a smooth surface. Wait for the print to cool before removing it from the printbed to prevent warping. No support…
A small carrying case for ear plugs with a hinge that all prints in place.
Polymaker cardboard spool adapter with modified edge tabs to grab onto cardboard spool lip better. It also prints easier as the edge tabs are supported with a 45 degree chamfer instead of an unsupported overhang.
Made the tabs much stronger and made a few small improvements overall to the model. Tabs should not break off! Galaxy Black Prusament! Print in whatever you like! PLA
There are several files for differents shapes and sizes. Fits those standard chinese PDR reverse hammers / pullers from Amazon / Ebay. You will need some M3x25 screws, nuts and washers to make it strong enough not to crack. Printed in…
I replaced the glue-in tabs with simple friction fit locking tabs which seem to work fine, prints ok in both PLA and SLA.
Modified the Decepticon 2 and Autobot 2 Trailer Hitch Covers by Djkirkendall to use spring tabs. For 2in hitch receiver. S3D Users: There's something causing a gap between the back of the faceplate and the hitch cover that leaves a large…
This model has only 3 modified parts. All other parts are not modified, find them in original model
Simple dividers with tabs equally spaced along one edge for labels, so you can see where one collection starts and another ends. All my comic books are on shelves, so you can't see the covers, and other dividers I've seen have the labels…
Print this on the K1 using Christian's instructions. It will need a tiny bit of support from around the locking tabs and in the “hump” where the Bowden/drag chain enters.
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Original description:…
top vent tabs for the flashforge adventurer 5mm pro. i was always putting something in the top to prop iit open especially with PLA. the fit snug in the corner and easy to print. a standard .2 profile works fine
3d printed inserts to fit into the SOG PowerPint multi-tool. Press in place using plyers and glue using cyanoacrylate (super/crazy) glue. Print at 0.2mm layer height using a 0.4mm nozzle. 0.6mm nozzle will also probably work. Several…
Remix of "Wingspan Dice Box/Tower/Birdfeeder - Flat Pack Fix Remix" by gexgecko. Added small tabs on side pannels and holes on roof to hold roof in place without needing glue. I only included the side pannels and roof as those are the…
10/21/2023 Update Added a third option to have the EZ insert which is the best insert I've used so far. Also added the STL file for the blank EZ insert only. I remixed my own version of this bin / box to now have two inserts w/o tabs, two…
Insert-Empty Remix without the Tabs, allows for easier insertion/removal.
A simple remix by changing the insert to be one with no tabs to make it easier to pull out of the HSW.
Thanks @ Stamos and @ Olivier . This is a remix of (https://www.prusaprinters.org/prints/32179-raspberry-pi-34-b-case-with-slot-for-camera-cable) which is a remix of (https://www.prusaprinters.org/prints/24942-raspberry-pi-34-b-case)…
Eryone started using cardboard spools. This is a fast print, if you use these settings, it is about 12 minutes on the X1C. The little lip hold the spool, and the single tab keep the ring on the spool while keeping as many holes open as…
This model is compatible with the lego system.
This is for the POI compartment to have some dividers in it
Tired of having to tie your bread bags in a knot because you can't find the original closing tab? Well I have the print for you! I did a quick sketch off of an authentic machine-punched tab and these work great! I like to print a handful…
The retention clips are quick and easy to use, except a bit fiddly to open. Added finger tabs to make it easier to manipulate. Remixed both the normal retention clips, and the larger one that is for the drive side on the receiver spindle
perfekt für: Kalibrierung Testdrucke Requisiten Demonstrationen (z. B. Physik oder Mathematik) Maße Durchmesser: 16.25 mm Dicke: 1.67 mm Skalierung: 1:1 (realistisch) Druck-Empfehlung Layerhöhe: 0.1 mm Düse: 0.2–0.4 mm Material: PLA,…
Inspired by what fellow V1E maker @PeterH already did for round sanding disks (which I printed and it's great). 😊 I'd class this as a remix except that every single polygon and face was done from scratch. Nevertheless, a lot of credit to…
Remixed the original model to fit on the honeycomb wall (HSW.) Can be used to store whatever, but in my case it was used for Q-Tips as the original maker designed. Please keep in mind this insert HAS NO TABS . Tabs on my system are nearly…
I'm remixing my own version of this. This STL file has the bin with the insert without tabs making it easier to remove. Mostly remixed this as the Fusion 360 file contains both the plug and the insert (w/o tabs) included. All parametric…
Replacment tabs for the Fiat Tipo estate bootcover slide. This tabs are a lot sturdier than the original, they are also wider so the slide does not derail as easy as whit the original tabs. Print them with support and 100% infill.
Remix of printables user @pyrho 's "Raspberry Pi 5 Case (snap fit)" that adds VESA 75x75mm mounting tabs to the base.
A remix of the remix. The changes here are adding more thickness at the base to prevent the part from lifting when printing higher temp materials. Also, extended the length of the parts by .5mm to account for a tighter fit. Added brim and…
This is a remix of Antilop Footrest from Tom Ewig but with thicker tabs. The original fastener works.
If you need to make changes to it, I've included both the .STEP-files and .F3D files. License I'm no lawyer, and since I don't give a shit if you goldplate it or do whatever to it, I'm adding a CC-0 license to my change. The original…
I simply combined the model of the tabs with Nadir's great case and baked them into a new stl. I then made an adapter to fit this tabbed case to the top hat which has a different tab spacing than the lower mount. I also tried to add tabs…
It's done a bit quick and dirty so you have to to put the cover onto the print plate as shown in the picture.
I like Rettex31's model for this but wanted some additional protection for my Voron 0.2, so I added some fins to make it harder to accidentally reach in and touch the bad places inside :-) I also extended the cover out a bit to allow for…
My Driver side tab cracked in half. It would be a party when on the highway/ move excessively on bumps. Mirror it for the driver side !! PRINT WITH SUPPORTS !! There's a hidden pocket in the tab, you wont see the supports but it will make…
My son really liked the Honeycomb Shelf posted by 3DPrintBunny. In the process of printing them, I decided I wanted a slightly different method to mount them to the wall, so I made these tabs.
I wanted to mount the LCD case to a proto board setup and decided mounting tabs with holes was needed. I placed the tabs to the bottom section using Tinkercad. They will now take a pair of #6 screws, placed 3.75 inches apart. Only the…
Fix for broken tabs on Wahoo Element Roam, which broke off after fitting the Roam into the wrong adapter. Printed with PLA and glued with epoxy glue - still holds after 6 months of active use. Since the model will be used outdoors it…
Inspired by what fellow V1E maker @PeterH already did for round sanding disks (which I printed and it's great). 😊 I'd class this as a remix except that every single polygon and face was done from scratch. Nevertheless, a lot of credit to…
If you've installed a R3MEN Graphite Bed then you will know it's thicker than the standard K2 bed. These tabs are attached to the rear of the K2 bed mount (see pic) . This allows you to place your build plate quickly in place without…
Also deepened the outline in the front a little bit and made it a no bridge print.
If you're playing Turing Machine, these card separating tabs will save you a lot of time and trouble when sorting the verification cards during tear down of the game. I saw this brilliant idea from this absolutely fantastic video here,…
This is are screw down tabs to mount a Mean Well LRS-350-24 power supply. It holds the PSU from the side and allows you to fix the PSU from the top. I recommend you use 4 tabs to mount the PSU. This design is part of my frame, bracket and…
Einhell Power X Change Akku Lötabsaugung Dazu benötigt werden noch: DC-DC Step Down Modul = LM2596S PC Lüfter 120x120 = ARCTIC P12 Silent Aktivkohle-Filter = Dunstfilter Kippschalter = Mini-Kippschalter
The original model by K2ij3 was great, but since I am using this on shelving as opposed to stacking my containers, I cut the tops and bottoms off the container and lid to reduce the size of the model and preserve shelving space. It also…
Remixed the base to include flat head screw mount tabs. the hole is 4mm. The tapered area diameter is 8mm.
This is a box with a lid. The files are scaled to print at 4.5" long x 3.5" wide x 2.5" tall. The lid secures with tabs that hook to holes in the box. To release the lid, push the tabs inward. The lid will bend and the tabs will release.…
This Hydra AMS tabs fix stops thin wall spools from getting stuck on rollers. For Hydra AMS v1.6 and v1.8. You will need 5 M3x6+ bolts and a 3/32" drill bit. Printed in PETG with 0.28 layer height and 20% rectilinear. Classic wall gen.…
I could never remember which string was the fan and which was the light. So I whipped these up. The model was made in OpenSCAD with the BOSL2 library.
Made this model for the Pokemon Trading Card Game. Place your damage counters, flip coin, burn & poison marker inside a TCG mini tin. Comes with Ability tabs.
Echte deutsche Möbel von Hand vermessen und digitalisiert Ein simples Regal was auch als kleiner Sortierkasten für Reiszwecken und Heftklammern verwendet werden kann. Inhalt: Schuhregal Maßstab 1:10 Schuhregal Maßstab 1:5 Schuhregal…
This is a remix of Supavitax's Cable Protector. I redrew it in Onshape to add the catch so it will lock into place. Printing Flange on build plate Filament - PLA, PETG Infill - 15% is good Layer Height - .25mm Supports - Small supports…
I found that the two nubs didn't hold the varia straight, so I adjusted it and added the tabs that are on the Garmin
A half shell case for the ST Microelectronics Nucleo-144 line of boards. Check the list below for tested boards. Many of the cases today rely on screws to hold them down. With some of the later Nucleo boards there are too many components…
A basic model of the FCS II (FCS 2) system fin plugs. I have used this in my own models when printing and trialling fins for my surfboard. This model is simplified to help with easy printing. One side will have an unavoidable bridge if…
This model is compatible with the lego system.
When grabbing a sheet of plain paper from the printer to jot down some TABs for the guitar i can never find a rule when i need it so i've made this to quickly draw out the 6 string lines and string tuning.
Frontmatter The first entry to my Zettelkasten series, I guess. I'm an academic in the humanities and my preferred medium for processing literature is pen and paper, which has led me to my variant of Luhmann's Zettelkasten system. My…
Lid alignment tabs for the Infimech TX. Print two and use the existing screws to mount. This is totally unnecessary unless you have OCD like me and hate to see the lid crooked. I also used small binder clips to pin back the velcro tabs up…
Hausmodell "Struckmannshaus" (Maßstabsgetreu) - Auch als Vorlage für ihr echtes Haus aus den Gebäudedrucker Dieses Hausmodell stellt das Haus dar wo ich von 2002 bis 2014 lebte. Dies Bauwerk ist mein wahres Zuhause und beherbergt viele…
Most overflow drains on tubs are not properly water-sealed, so this is practical because if you are actively taking a bath, you may want to block that drain while you're in the tub. Best printed with TPU Once again, do not pop this on,…
This is a true 4 inch trim ring to go around PVC or equivalent decking posts. Will not fit around a 4x4 lumber post. Two locking tabs that are a snap fit. Add glue to them for a more permanent fit.
Just the same Loki tiara with strap tabs for putting ellastic bands Category: Costume
I adore this model, I refused to move away from it for my Pi Zero W2. I decided to mash it up with the Pi Zero W Camera Mount on Thingiverse ( https://www.thingiverse.com/thing:4223826 ) Nuts are M3, I drilled them out to an M4 and used…
This design has only been tested with a Lomograflock 4x5 instant back so far. And as not been used extensively yet. I will not be responsible if an attachment to the rear of your camera falls out…! Since 1949, most cameras 4x5 view camera…
Here's a quick guide to the varied covers: Innie : Features a cut-out “T” connection. Outie : Has a “T” connection protruding. regCover : A standard length cover for any external edge. shMiddle : Designed for a shallow “U” shaped…
These are simple tabs meant to hold mirrors, boards, posters and the like to your wall. Both the depth and counterbore should be easy to edit in Fusion360 (or your program of choice) if you need different specifications. I suggest…
The original wasn't long enough to reach the release tabs on my 2003 Tahoe. So I lengthened the tabs in tinkercad and reprinted it. I ended up pushing them in with a narrow open ended 11 mm wrench, then once they were both seated I put a…
I created this because I disagree with the other Robot builds that suggest downsizing the 58mm Umikot to 94%, I want my as much of my bed as possible whisked. To this end, build the standard 58mm Umikot at 100%, and print this, it will…
Closure cap for tube, equipped with three elastic retention fins. Designed to be press-fitted into the inner diameter of the tube, ensuring a stable hold through the elastic deformation of the fins. The slightly undersized body allows…
---UPDATES--- 03/18/2022 - A couple of people mentioned the rear left alignment tab was making contact with the Y-axis stepper motor. I am not having this issue because I am using silicone spacers that measure 18mm in height. I have added…
Replacement Tabs for OneTigris Airsoft Mask https://www.amazon.com/gp/product/B06XQFBW42
This is an outside ventilation grid cover for a cooker hood. It is a replacement for an existing cover and encloses it. Attention. There are two versions. The outside diameter for the pipe insert is available in a special dimension of…
Shelf support tabs. Designed for bathroom shelves but can easily be scaled up if necessary. Two versions are included: one with a 4mm diameter base, and another one with a slightly smaller base (3.6mm). They have been designed to be…
This is a very basic remix of this nice stand to collimate your laser collimator: https://www.printables.com/model/263598-laser-collimator-collimation-stand I added some basic tabs to allow you to tape the stand to a flat surface so it…
I used gerryw's original tray for about a year before the tabs broke off, perhaps due to user error. In any case, the walls seem thicker and more rigid than necessary. For this remix, I filled in the gap between the tabs, thinned the…