116 models
Money Tic Tac Toe This version of Tic Tac Toe, aims to introduce a more exciting component in the challenge of winning. It can be played with Tokens/coins of Dollar (black) and Euro (orange), created for this purpose. After the end of the…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Simple stand for rapid antigen test. Often there is nowhere to put the tube when self-testing, collection tip, so many colleagues at work had simple stands made for this purpose out of cardboard, antigen test boxes, etc. I printed it out…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Print profiles for the Prusa Core One L. Download, test, and evaluate your flow limits for different materials. More profiles will be added as I use them. How it works Every 3 layers, the printer increases the volumetric flow by 1 mm³/s.…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for PETGSource material: PET
Model is a 25mm coin with Recycle triangle <1> and PETG on both sides. Each coin consumes 40 cm of 1.75mm filament using a 0.4mm nozzle sliced as Prusament PETG. This print is useful for consuming the end of a roll that is too little to…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Funktionstest für die Prusa MMU
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
Filament Sample Swatch with stringing and over-hang tests. small print.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
A simple Covid Teststand in spiral mode: Fast printing, less material, but still stable. Choose the Teststand you want: .._Triangel_.., .._Square_.. or .._Round_.. The gcode files are for Prusa MINI. If you want a different modell, use…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
This is a transition of my bed warping tests from Thingiverse. I was having warping issues and wanted to see how changing my bed temperature impacted printing so I made some basic models that have a similar shape to the models that were…
Introducing the ultimate filament test swatch! This little print covers all the basics for printer testing, as well as being a convenient filament test swatch, all with a place for a label and hole for a keyring. The label is sized for a…
In case you print several of these filament swatches , you might need a storage solution. Here is a configurable one. You can even add little pegboard nubs to fix your swatches to a p-slot type pegboard. This box is based on the…
Just your average XYZ cube with a few extras.
I made these to test whether Z-Hop has any effect on knocking down fragile parts. However I soon realised that these very simple parts are hilariously hard to print. So, give them a go, and post a make if you succeed (or fail!) and maybe,…
A few different stringing test. Because models are different so this will help to test stinging. They can be used for any type of filament.
This is a print test for bolt threads created and modified in Fusion 360. I needed a more consistent way to add threads to my projects - I used these test prints to play around with altering the standard threads generated in Fusion 360 to…
Spiral Bed Level Test These are Spiral Bed Leveling tests created using an OpenScad File. The OpenScad File is included so you can customize your own Spiral test size. I use these to set the Z Offset on the fly after auto leveling with a…
I needed a variety of Z height adjustment tests. So I created a variety of heights (.15, .20, and .25 mm) and a few different types including 140mm square and circular prints. This should let you visually asses your Z axis height. In my…
📌 Hole Calibration Pack – Holes That Actually Fit This calibration pack includes every test you need to understand how to design holes that fit consistently in 3D printing , no matter what printer, filament or slicer you use. These are…
I wanted to find out what my ring size was but didnt have time to go to a jewler and i wanted to double check my measurments, these rings are in US sizes.
These are the details for perfect stringing models- Layer Height- 0.15mm First Layer height- 0.2mm Retraction distance - 8mm Retraction Speed - 30mm/s Print speed - up to 130mm/s
You've got all of the models from the “Making 3D prints actually waterproof” video. Have fun and be responsible of course.
Clearly, I did not yet have my printer fine-tuned. In my first attempt at printing K2Van's challenge piece - a little under 4 hours to print, every nut was frozen solid. While informative, I decided that I could have learned as much from…
This is a Filament Swatch that allows for use with address labels. Swatch includes tolerance tests for bridging (5, 10, 15, 20mm), walls (0.5, 0.8, 1, 1.5, 2mm), transparency (0.2, 0.4, 0.6, 0.8, 1, 1.2, 1.4, 1.6, 1.8, 2mm), overhangs…
Print these tests using your favorite printer settings. Use them to determine what size to use in your designs for the fit you want. Typically, the actual sizes of the holes when printed will differ from the size given in the design. Find…
Flipped into the correct orientation version of the original model . Printing tips: Use 0% infill Use Seam painting tool in PrusaSlicer to achieve uniformal seam for testing:
If there's a need to compare the strength of two or more different filaments that you have, then print these using the respective filaments, break them with your hands, and feel out the difference in strength to determine the right…
VFA (Vertical Fine Artifacts) test models for a wide range of Prusa Core One printing speeds from 40 to 350 mm/s. There are notches 5 mm apart at the edge of the models, marking speed changes in 10 mm/s increments. To observe VFAs, you…
This is a flying airplane - not only for beginners. You can use for just flying or (main idea) to test and understand different proportions and setups and how these change flight characteristics. You can easily prolong/shorten the wings,…
Small filament sample, it takes less than 2g of filament to print it. It has some basic flow tests: from 90% to 110% with 5% step, ironing, inflill and rectangle with 1 layer and 2 layers (usefull for lithopane). It won't replace full…
This is the ultimate stringing test V4.3, along with stringing it also tests for warping. It has poles of various lengths with diameter difference at the top and bottom. It is a very hard challange for a printer to complete but I have…
This Thing is licensed under the Creative Commons - Attribution - Non-Commercial - ShareAlike license. This means to share with other people you MUST give appropriate credit and a link to this page. YOU MAY NOT SELL this design, and if…
Short Introduction VIDEO for the unofficial Drag Race. Are you needed to work on your bridging settings? Are you sick of using the same small feature of a model to print? This is a test you need! Three tests in all for .4 .6 and .8…
I have been using the Mini All-in-one Printer Test as color swatches for my filament. I created this to keep them organized. I wanted something that was simple and did not use too much filament. I also wanted the lines to match the test…
Here are some test models to visualize different layer heights using 5mm steps. The layer height increases by 0.02mm per 5mm step using the height range modifier. Outter and inner wall speeds were set to 80mm/s (0.4 Nozzle) , but feel…
Changed ironing place and type
All in 1 test with Cancel object support. Print using 0.2 layer height Left bottom square - First layer calibration (Cancel object support) Right bottom square - Hole tolanace (Cancel object support) Left top square - bridge test (Cancel…
Test your bridging/cooling settings! Check if your bed adhesion is good enough for small footprint parts. Prints in minutes and uses less than 1 gram of filament. Category: 3D Printing Tests
Print version A for a really fast print to make initial adjustments. Once version A is printing correctly, move on to version B to fine tune your settings. I printed these with Prusa Galaxy Black PETG at a 0.15mm layer height.
I've made these small temperature tower models so they can be printed relatively quickly in about 30 mins. Each model has 9 levels in 5 °C increments and a range of 40 °C. They range from 190-230 °C (suitable for most PLA filaments) to…
Slice at 0.20mm layer height in your favorite slicer with your settings. Feel free to try and tweak your settings for best performance!
These are the test parts for 3.5mm (M3.5) screws used in the video below.
Kill two birds with one stone for your new filament: maximize its print speed and ascertain its shrink rate. Do it all with less an hour of print time and no math required on your part. What is this for? These tests let you determine the…
Simple test cube, measures 20mm on X, Y, & Z Tiny retraction test on top and rotate it to get some short bridging or test your supports. There's a ~60 degree overhang if you tip it on its side too. Play around with it and let me know what…
Tolerance test on the thread of a screw and bolt, for resin printer. Dado 1 / Vite 1 = Tollerance 0,10 mm (0.05 mm Dado / 0.05 mm Vite), Screw Pitch = 2 mm Dado 2 / Vite 2 = Tollerance 0,10 mm (0.05 mm Dado / 0.05 mm Vite), Screw Pitch =…
All-in-one House/effectors for the FLSUN Superracer with HGX Lite V2 Extruder and X1C Bambu Hotend and TZ V6 Hotend Update: Added Effector/house LGXLite/HGX Lite Combo with X1C Bambu Hotend Also Houses for original effector. Need Effector…
Basic Tolerance test that doubles as a fidget spinner.
Update: I made some changes to the sample. The overhangs are now real overhangs and the stringing/cones/cylinders-section is more efficient now. Further I added a test for sharp corners and another bridging-test. (The green sample is the…
For those of you who printed our Pyramid Calibration Test (PCT) and found that your machine can use some fine tuning, but you don't necessarily want to reprint the entire PCT again. We are providing an exploded version of the PCT that…
3d printer torture test that takes a short amount of time This will test small overhangs witht eh letters large overhangs text detail top layer side accuracy 20mm top hight 20mm and the test on the top to see how much detail you can get…
Testrack for JBL Water Tests Printed in PLA
I use these for my filaments to thest their bendability and strength, print these at .1 layer height with 100% infill
It is puzzles where, in a lot of ways you can set them
I loved the original model but I wanted something I could slide into a vertical slot on the front of my dry boxes or AMS. Also sized it to fit my 50x30 labels.
This simple print holds a mirror vertically. Fine details are not necessary on this print; you can go very fast with the right settings. Printed with .28mm layers and 15% infill on an Ender 3 V2 with Black PLA in just 5 hours. If this…
This is a set of very basic tests of the mechanics of your printer. The intention is that they should be fairly slicer-independent, and they should each, as far as possible, isolate a single feature of printer performance. XYZ size:…
these are 3 bridging tests that will determine how good is your printer ad printing bridges.
These are test prints for different filaments. They should be printed at 0.2 mm layer high. They are 30 x 30 x 1mm. I have made them for a few samples but I can add more.
I went through a few iterations before landing here. Minimal X beams save on resin/pla, and this holds 6 test tubes securely for a full panel of tests. Print on it's side, long-ways, and minimal supports are needed.
Used to validate your printer for XY skew, XZ and YZ Skew. When accuracy matters, this is a good way to validate your builds true numbers. Simply measure the diagonals and compare the difference, this is an exaggerated error to easily…
Filament Swatch with key tests included i.e. Layer Thickness 0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.4 / 1.6 mm Holes 10 / 7.5 / 5 / 2 mm Walls 3 / 2 / 1.5 / 1 mm Convex bodies: Cone , half-cylinder and half-sphere Round shapes Sharp inner…
🧩 The ultimate customizable AMS multicolor calibration tile generator! Did you just set up a new AMS combo, or are you tuning your filament flushing volumes? This fully parametric OpenSCAD generator creates interlocking multi-color tiles…
Small models for fast Tests for retraction, pressure advance, extrusion, seam
a fast and simple test model for stringing
I don't usually print stuff without a purpose. I print useful parts for printers, other hobbies or my house. So when I designed my maker coin I didn't want it to be a piece of plastic with no use. This is my maker coin and it has a lot of…
Oui, encore un support pour vos tests de GH et KH, mais celui-ci est spécialement conçu pour la marque API. Les bouteilles et les tubes seront bien maintenus et la description indique clairement les changements de couleur attendus.…
This is a simple test cube I made, that will test your printer for multiple tests. Dimensions - The outer dimensions are 30 x 30 x 30 mm, and the inner dimensions are 10 mm, which gives you several dimensions to test your printer for.…
My entry for the Remix a Super Hero! Model has been modified to print without support. There are several tests for your printers, string tests that are printed at an anglem as well 2 big bridges
A set of rotation indicators i made for testing NEMA17 motors and control systems in the comfort of my desktop before attaching them to the actual ball shafts. The motors i use have a 5mm shaft. The indicators can be stuck on without any…
I made these models to help dial in circular overhangs , seams, and cooling with PETG on my bambu labs x1c.
PLA +", lite, pro, max... That was quite complicated to purchase a quite resistant PLA. So I compare my filaments by a scientific impact resistance study. I don't have Charpy bench so I propose another system ;) These models contains: The…
A comprehensive Multi-Tower Stringing Test Series comprising three progressive calibration models: the 2-Tower , 3-Tower , and 4-Tower variants. Each model features vertical pillars connected by a top peak, designed to stress-test…
(Test-) Schlüssel für die Gehäuse von Handmeldern nach DIN EN 54-11EN 54-11 ("Feuermelder", auch viele übliche Brandklappen- oder Hausalarmschalter, …): kann verwendet werden, um Handfeuermelder nach der Norm DIN EN 54-11 zu testen (ohne…
Für meine Drucker (Raise3D E2 und Bambulab A1 Mini) hab ich mich für ein Spaltmass von 0.050 mm entschieden, da ich damit dann für die verschiedenen Filamente in den jeweiligen Slicer IdeaMaker und Bambu Studio die Profile / Templates so…
This is a compact and sturdy electric motor test stand designed specifically for testing motors used in RC aircraft. It allows for easy and secure mounting of motors and provides a stable base for controlled testing and measurement of…
Made it for myself while designing a part for my printer. Maybe it will save work for someone else.
I designed these models with 0,2mm and 0,15mm steps so I have reference for transparency for different types of filament and few settings. Model filenames are self explanatory (contain first and last thickness, steps, layer height). One…
A stand for color change experiments. I want to save my examples for the future to compare them to the thing I will do, I need help so that it will not be reprinted Link to download the Purge calibration tool for all MMU MMU2S MMU3 on MK3…
A filament Swatch that has overhangs, bridging and diffusion tests, as well as sharp edges to test adhesion, round edges to test flow andtext to check detail. (As much as possible in such a small size) This has a small form factor, so…
Will it fit? Let's check. With these tools you can see what your printer will make before you design holes. Do you need a loose fit? Snug? Hammer fit? Do you want to make a hole that a bolt will thread into? These test sticks go up by .2…
Sample holder for Corona rapid tests. Designed to assemble for class sets.
ein Modell, das er für seine Tests veröffentlicht, und ich habe nichts gegen Kritik an dem Modell
Best way to say thanks? Post a make. Description If you’re constantly printing calibration and stress test parts, you know they end up everywhere… or worse, lost right when you need them. This Gridfinity 1x2 holder is designed…
I know there are already several models for Covid Test stands in printables, but nothing does really fit for me. There are all too big. Normally I make 1 or 2 tests in parallel, and sometimes 3. So I made my own model. And this is very…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…
Oui, encore un support pour vos tests de GH et KH, mais celui-ci est spécialement conçu pour la marque Hagen Nutrafin. Les bouteilles et les tubes seront bien maintenues et la description indique clairement les changements de couleur…
For all those who, like me, have had a longer delivery time for the new upgrade for converting CORE ONE+ to GEN.2, I have prepared a STEP file of the wiper for testing so that you can save some time waiting. This is a file created ONLY…
VENTILATION PANEL FLANGES Choose by actual hose dimensions. 125 mm clear bore / 129 mm spigot OD / 153 mm square flange / 138 mm screw pitch; or 150 mm clear bore / 154 mm spigot OD / 178 mm square flange / 163 mm screw pitch. Four 4.6 mm…
printer test, can your printer print it??
VACUUM SOCKET COUPLERS — DIMENSION-BASED, NOT BRAND-SPECIFIC Three female-to-female couplers for rigid plugs with measured outside diameters of 32, 35 or 38 mm. Internal receiving bores are 32.4, 35.4 or 38.4 mm (0.4 mm diametral…
If your printer can print this, then you have the best printer post a make ( my guess is there will be no makes) Category: 3D Printing Tests
Just added a part to mount that bin on a Multiboard Desdigned with Freecad
Pour utiliser, il suffit d'imprimer et vérifier que la hauteur des ronds est bien de 1mm
![[Flipped] Fast Stringing / Retraction Tests](https://media.printables.com/media/prints/837786/images/6453771_3d35048d-8fed-4942-8f0d-fe2cf30c0954_c924ab62-fc60-48db-91f5-c02c147b34e5/stringing_test_v1_2024-apr-09_11-32-12am-000_customizedview1378487328.png)
