5,442 models
One more Thing from the Addams family Designed for unsupported printing with high detail. Happy HALLOWEEN Print instructions No support needed
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
A low poly model for 3D-printing of Rodin's Le Poète , The poet in English, and commonly know as The Thinker . Print instructions All three models somewhat complicated prints but the easy to print one uses bridges for the worst overhangs,…
Print approx. €14.65–€17.90 excl. taxPreliminary estimate for one variant
Simple keychain from original Netflix series - Stranger Things. Logo and 3D model is my own design. This model is 2 colors project - black and red. I've printed from PETG - You can use PLA too but please change settings. Keychain size…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Today I have Demogorgon for you - a monster from the movie Stranger Things. It is a really faithful copy of the famous monster from the movie. It is also suitable for coloring, or for a diorama with the theme of the upside down…
Print approx. €8.57–€10.48 excl. taxPreliminary estimate for one variant
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Hello, this is my pen based on a bistable compliant mechnism. It is very thin (3 to 5 mm) and works with a standard BIC refill ( BIC Cristal). Its center of mass is located (approx.) on the first contact surface (seen from the actuating…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
daffy duck looney toons
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This compact pill case is designed for situations where a full-size pill organizer would be unnecessary or impractical. Its ultra-slim form factor makes it ideal not only for travel, but also for everyday situations such as g oing out for…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Just a simple desk stand for the Spotify car thing. Great for use with Desk Thing as well. Prints in just over an hour with the PrusaSlicer “Draft” profile. Made this quickly as I found Spotify car thing to be a useful device to have on…
Print approx. €1.85–€2.27 excl. taxPreliminary estimate for one variant
Stranger Things coaster - HellFire Club Diameter : 100 mm Three versions : normal, negative, keychain 5 layers / 4 colors : First color (up to 2.3 mm) : black Second color (up to 3 mm) : yellow Third color (up to 4 mm) : red Fourth color…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
Model from https://cults3d.com/en/3d-model/art/funco-max-stranger-things
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for one variant
Nothing/CMF watch 2 Pro charging dock/stand
Print approx. €3.75–€4.59 excl. taxPreliminary estimate for PETGSource material: PET
Stranger Things coaster Diameter : 100 mm 4 layers / 3 colors : First layer (up to 2.5 mm) : black Second layer (up to 3.2 mm) : red Third layer (up to 5.2 mm) : white Last layer : black Dessous de verre/décoration Stranger Things…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
Hey all, I would like to share with you my design of stranger things lithophane rotational lamp. For those who are not familiar with printing lithophanes i decided to add G-code for all STL files so it would be much easier for you. It…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for one variant
Steve Harrington : Stranger Things
Print approx. €4.75–€5.80 excl. taxPreliminary estimate for one variant
WSQK Van : Stranger Things. I did some crazy stuff to get this to work/fix. Let me know how it prints. Cheers. And there is no AI involved... Just blender... My tool chain has been reduced to just blender these days. Gone are the days of…
Print approx. €14.10–€17.24 excl. taxPreliminary estimate for one variant
Magnetka v designu známého seriálu. Vlastní výroby. Model s vloženým magnetem ("neviditelný magnet"). Vložení neodymového magnetu o průměru 1cm a výšce cca 2mm. (při změně velikosti se změní velikost magnetu. Barva: černá a červená Tisk.…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Printed in PLA with organic supports. Bracket attached with 3M double-sided adhesive.
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Print No supports or brim needed.
Print approx. €5.59–€6.83 excl. taxPreliminary estimate for one variant
Mathematical toy mechanism: https://en.wikipedia.org/wiki/Trammel_of_Archimedes Fully articulated model drafted in Onshape: https://cad.onshape.com/documents/d659bd7bc2d1aa257044b19d/w/c36c7990b68ed0b7e594a5ae/e/fd8c4be747739989452cc2a9…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Remove all the mess at your desk by moving the dock of the surface. This model allow you to hang your dock on the back of your desk, and it is easy to move. It is recommended to print the model in PETG, and to make it strong i recommedn 4…
Print approx. €18.96–€23.18 excl. taxPreliminary estimate for PETGSource material: PET
A simple remix of boodaah3d's magnetic bed aligner model but chopped down so that the edges of the aligner don't stick up past the build plate. My build plate/heated bed is almost exactly 5.5mm thick, and this model sits just flush with…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
3D printable bust of Vecna inspired by Stranger Things Season 5. This is fan art and not affiliated with Netflix or the show creators.
Print approx. €13.58–€16.59 excl. taxPreliminary estimate for one variant
Inspired by great video from the guy with Swiss accent I've bought Lenovo ThinkCenter in USFF case to be my home server. I've already have my “internet devices” mounted on a wall in my closed so I quickly designed this holder to mount the…
Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant
Very fun model of Orko from Masters of the Universe. Printed with the base, but didn't need it. Also printed with full organic supports. Came out quite nice. Now to paint…. Much thanks and all credit to ChelseaCreatesThings on Thangs.
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Intro There’s something truly magical about dropping a bath bomb into warm water. It fizzes, it sparkles, it releases your favorite scents while nourishing oils gently shimmer on the surface. The water comes alive — and so does the…
Print approx. €5.96–€7.29 excl. taxPreliminary estimate for one variant
Stranger Things coaster - Demogorgon Diameter : 100 mm 4 layers / 3 colors : First layer : white Second layer : red Third layer : black Last layer : red Dessous de verre/décoration Stranger Things - Demogorgon Diamètre : 100 mm 4 couches…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
Netsuke : Where the Wild Things Jar
Print approx. €12.28–€15.01 excl. taxPreliminary estimate for one variant
This mini protective case is specifically designed for the Nothing Phone (3a Pro) . It provides targeted protection for the camera module without compromising the phone’s unique design. Features: ✔ Discreet design or not that perfectly…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
The original model height is approximately 21cm. Suggested print settings: Layer height 0.2mm. Infill 20%. Perimeters: 3. No supports are needed. Models in pictures are printed at 50% scale. Changelog 20 Oct 2023: Version 2 - An alternate…
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
A remix of Prusa's RC3 USA 3-post face shield with: 15mm z-height vs 20mm for Prusa's (quicker print and 25% less material with minimal impact on durability) improved comfort near ears via 7.5° flare filets instead of chamfers to reduce…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Model Info Foldable Phone, Kindle, or Tablet Stand - easily printed in place. Including a folding mechanism with auto stop, see the pictures!…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
Surf Boy Pizza Van : Stranger Things : Crash Derby Car
Print approx. €3.79–€4.63 excl. taxPreliminary estimate for one variant
This is a very lightly modified version of J White's excellent fan guard (which is a remix of Der Peiner's). For whatever reason, I did not have enough room on my printer for their model. The printer was detecting crashes and too short of…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
I thought this model captures what I must look like trying to play most of the time! I downloaded the original scan of the statue here (link below) and then used the new simplify model to make it easier to print at this size.…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Thin wall - calibration tool Figure out how thin a wall can get with your settings and how printing directions differ. TLDR; With standard 0.4mm nozzle and "detect thin walls on" you can print 0.2mm thin single perimeter walls which are…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Stranger Things Light Wall Alphabet decoration.
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
I liked the design I'm remixing. I decided to add a small compartment for a few bills, coins or flash memory cards. The drawer is very tight and there is no way to accidentally open it. The credit card compartment can hold 3 or 4 cards…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Info: handle for cylindric lint sticky rollers many manufacturers copy the same design so here is a holder for many of them can hold tightly also the transparent outer part (cover) if you have it reinforced parts which can break (and it…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for PETGSource material: PET
Lost your low profile PCI slot bracket/cover and need to get a graphics card in a tiny case or server chassis? Well maybe this will help you! The OG version was too thick for my case so I made this thinner and trimmer version. I recommend…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Webcam Step: Elevate Your View Modern technology has gifted us with sleek, thin-framed monitors. While these technological marvels enhance our workspaces, they also present a new set of first-world problems: webcams dangling into the…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
These parts are designed to use a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I decided to build out some parts so I could print a camera mount with vase…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This is a basic remix of the wonderful Tiny Epic Galaxies board game player mat overlay by Sherri making the back piece thinner to better fit the whole set within the original game box along with some other printed organizers. I removed…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Thinner walls from the original. I can adjust the model to include different container configurations, let me know.
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for one variant
Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
As you can see, chicks can also swim. Add a little less ballast than I did so that it can float more easily if you like. I used 7g (2 Allen screws M5x16) and printed with 0.2mm layer height without support. Art design by Hannah. Happy…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
I needed to be able SD storage devices but didn't want to limit myself to a fixed number of devices. I found this model by mbrami on Thingiverse and it allows for a different type of device to be used in each location, with the number of…
Print approx. €4.92–€6.01 excl. taxPreliminary estimate for one variant
vacuum cleaner nozzle thin and long
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for PETGSource material: PET
During box or square breathing, you breathe in for the count of 4, hold for 4, breathe out for 4, hold for 4, repeat. This little tool is a tactile guide for centering your mind while you do the box breathing. Each side has a different…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
I was sick of having cutlery soaking in water so I made this riser. It's meant to work with ORDNING Stainless Steel Cutlery Stand and the EKIPERA plate. It prevents drying cutlery to come into contact with excess drain water. Edit feb…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for one variant
Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…
Print approx. €7.95–€9.72 excl. taxPreliminary estimate for PETGSource material: PET
At the original height of 30mm can be printed with 0% infill and no supports. The sturdier version of the file has a closed teapot spout. Let me know if you have ideas to improve the model or print speed. ----- Design of Everyday Things…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
This crocodile-shaped clip allows you to hold towels or whatever you need. The gear slides along the tail making the crocodile's "mouth" squeeze harder. The clip allows you to stick the crocodile in the sand. The crocodile's tail also…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for PETGSource material: PET
If you like the things CarlCreates makes, please consider to become his Patreon: https://www.patreon.com/carlcreates
Print approx. €5.06–€6.19 excl. taxPreliminary estimate for one variant
Modified to work with the picture hanging Velcro Command strips. *Warning don't use with non-Velcro strips
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
the g-code has the proper height of layer for the manual color change
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
AI Thinker ESP-32 CAM Case with separated std. mount pin for easy printing and assembly. Designed to be mounted on arms
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for PETGSource material: PET
Parts Box with Separators - Tight Fit Lid. Made with fusion 360 (Testing prebaked tolerances with filleted fits) Updated gcode for bigger print. Small test version worked well. Printing big one to see if tolerances keep
Print approx. €6.20–€7.58 excl. taxPreliminary estimate for one variant
The Thing: The Boardgame kickstarter had addons that would replace the cardboard tokens with acrylic tokens. While nice, they have a design flaw: they are reflective. The tokens are supposed to be hidden information and put face down on…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Both feet of my Lenovo Thinkpad Keyboard 2 broke after a while so I took my calipers and designed new ones. They work identical to the original ones and even have the same satisfying click that might have made me brake the old ones. :P I…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Here is a small decoration or a keychain Dimension : 90mm/46mm/3mm Dimensions keychains : 45mm/23mm/5mm The print files are with a color change, I advise you to slice it yourself.
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
This holder is designed for Samsung SmartThings SmartTag. It is printed in 2 parts to allow easy removal of SmartTag when needing to change battery or take on the go. Supports will be needed for the center portion of the holder. Be sure…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
This laptop stand raises a Lenovo Thinkpad T490 laptop 95 mm. higher above the table. It provides better posture, room for a separate keyboard under your laptop and still makes the whole setup portable. Printed on a Prusa Mini+. Using…
Print approx. €4.75–€5.80 excl. taxPreliminary estimate for one variant
The sorter allows convenient storage and sorting of small items. The individual tiers can be stacked and the upper part of the sorter can be closed with a lid. Updated. Added a lid with holes, for mounting the top handle.
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
It's more a slicer thing than a printer thing. See how the slicer works on thin walls. I have discovered that slicer makes a difference between Arachne Perimeter and Classic Perimeter as well as the option Detect Thin Walls which can only…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Test the ideal number of layers!
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
When exercising with a face mask the fabric is prone to pulling against your mouth when breathing in, making breathing difficult. This device maintains a space between the upper lip and fabric, making it easier to breathe freely. Print…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for PETGSource material: PET
TL;DR Ongoing open project to use a cheap server rack as heavy enclosure for a silent secure printer cabinet. update 2023.0423 added cover for power / filament entry to close the racks completely added cover for top side openings The…
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for PETGSource material: PET
Description: Simple clothes rail holder for all IKEA shelves or cupboards that are too narrow to hang clothes properly. This part allows you to hang the coat hanger horizontally with the cupboard shelf. This is done by attaching the…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
My brother in law broke his nubby for his cheapo Cabelas knife, and asked if I could make another. I did, and here it is. Version 2 is the one I printed. I forgot to tap the screw hole. Version 3 I tapped it with an M2 bolt, but didn't…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
A simple Coaster in the shape of a Penny Farthing Bicycle
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
First look at 3D pinball I'm making out of old door latch solenoids that have been lying around doing nothing. As a kid I wanted to make a pinball machine. So with just a few solenoids, a 3D printer, and some bits and pieces I'm going to…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Plugging in the RFID cables for the MK4S was a pain in the butt, so I designed this tiny tool that could reasonably help hold and push the plug into place. Simply put the head into the tool, align it with the plug, and push down on the…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Print as you like, No support needed.
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
space command module
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
You can Print it all as one color or you can switch the colors up in 3 spots, I would recommend a lighter color or nontranslucent filament to see the Easter Egg back text more clearly.
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
TAMIYA - stack container for 2x 250ml Lacquer Thinner compatible with: TAMIYA - stack container for 6x 23ml color glasses von stefancham | Kostenloses STL-Modell herunterladen | Printables.com
Print approx. €5.91–€7.23 excl. taxPreliminary estimate for one variant
Made these for holding up models for acetone vapor smoothing, could also be used for holding up models for painting. Won't hold much weight, but my goal was to make something that was simple and could be printed fast with as little…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This Sun Protection Case for CMF Phone 2 Pro shields your phone from the sun - helping to prevent overheating while you enjoy the outdoors - whether you're at the beach, the pool, or just hanging out with friends on a sunny day! This Sun…
Print approx. €6.87–€8.40 excl. taxPreliminary estimate for PETGSource material: PET
This is a stand I made for a laser cut easter sign. It's about 6cm 3cm 1.2 cm. It can be used for plywood of 3.5 mm. The plywood I used was about 20cm * 12cm so the weight of the plywood may be an issue.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Remix of LCD knob by Boogie.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Summary This is an adapter to designed to fit over the Nothing Ear speaker and slot into the filter space for a Sensaphonics ear plug. It's also small enough that you can keep the adapter on your Nothing Ear while charging your buds in…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
pot fo somthing
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Nunchuck Wii adapter for CNC motor driving housing In order to pilot the 2 stepper motors of my OPENSCAN scanner, i use a wii nunchuck connected to the CNC shield of the arduino remix of https://www.thingiverse.com/thing:951963
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Why not have a fun pencil pot, well here you are, this model is a pencil pot with a marble go literally using pencils and a pencil pot, this also has a delaval nozzle where the marble comes out and has a decider if the person stays in the…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
This spinner is themed after stranger things this print is none multi colour I just painted it. To hold it together you can use magnets or glue if you use magnets they need to be 5x5 mm or smaller.
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
While playing with gear designs I came up with this idea, and I found it interesting enough to share. The gears can move side to side, but they don't fall out. After printing the 60mm version I also uploaded two longer ones (80mm and…
No more fiddling with resting your phone against random objects when bored on a flight of cafe after realizing you don't have a phone stand with you. Credit-card sized and ultra-thin to fit in any wallet. PS: only works with the phone in…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Commercial use is NOT allowed for this model
Taking inspiration from the original model, this version has thicker walls and 100% more fillets to make removing small parts easier. Thanks to @Printercat64 for catching a fillet error and prompting me to finally remodel this and upload…
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
![[REMIX] The Thinker - Voronoi Edition](https://media.printables.com/media/prints/581337/images/4915766_6be6cd43-bbda-453a-93e2-a49e6a31ec26_9f066e78-a41d-4e51-b188-f9113a4e6977/img-1-new.jpg)
