Search results: thing

Addams Family Thing

One more Thing from the Addams family Designed for unsupported printing with high detail. Happy HALLOWEEN Print instructions No support needed

Fruit and Vegetable Washing Basin from Thingiverse # 5685812

NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…

daffy duck from thingivers

daffy duck looney toons

Desk Stand for Spotify Car Thing

Just a simple desk stand for the Spotify car thing. Great for use with Desk Thing as well. Prints in just over an hour with the PrusaSlicer “Draft” profile. Made this quickly as I found Spotify car thing to be a useful device to have on…

Stranger Things coaster - HellFire Club

Stranger Things coaster - HellFire Club Diameter : 100 mm Three versions : normal, negative, keychain 5 layers / 4 colors : First color (up to 2.3 mm) : black Second color (up to 3 mm) : yellow Third color (up to 4 mm) : red Fourth color…

Nothing/CMF watch 2 Pro charging dock/stand

Nothing/CMF watch 2 Pro charging dock/stand

Spotify Car Thing Monitor Mount

Printed in PLA with organic supports. Bracket attached with 3M double-sided adhesive.

Bulgarian Bagpipe (Gajda) (everything but the bag)

Update 5/28/2023: Replaced drone reed tongue with an improved model with better tone. Quick Start If you don't want to read all the text, the quick way to jump in and have a playable instrument (without the bag) is to just make the…

Vecna Stranger Things

3D printable bust of Vecna inspired by Stranger Things Season 5. This is fan art and not affiliated with Netflix or the show creators.

Porche 911 from glenjohnston on thingiverse: split and optimized

Optimized version of https://www.thingiverse.com/thing:39105 Different parts split in different bodies Bottom of car body flattened Rescaled, and multi-layer height optmization in the print files. Copyright 2014 GlenJohnston

Braids, Ink, and Nothing Else.

Stranger Things Vecna from Season 5

Stranger Things Vecna from Season 5 To make him stand better,heat his legs with a heatgun and push him into a good position

Netsuke : Where the Wild Things Jar

Netsuke : Where the Wild Things Jar

Nothing Phone (3a Pro) Ring Protective Case

This mini protective case is specifically designed for the Nothing Phone (3a Pro) . It provides targeted protection for the camera module without compromising the phone’s unique design. Features: ✔ Discreet design or not that perfectly…

Flower pot / planter or bowl for something

Simple but nice flower planter or bowl. For flower planter use min 3 layers (best is 100% infill). I printed i vase mode too, and it is OK like bowl. I used Prusament Galaxy Black PETG for vase mode and rainbow STX PLA for normal mode.

Clicky thingy - modular

The Clicky thingy is a clicker fidget where it's possible to change the clicker mechanism. Different clicker mechanisms have different sound and feel. Some are quite loud, and ablit stiff, and others soft with a lower click sound. I've…

Tough Credit Card Holder with Tight Drawer for Things

I liked the design I'm remixing. I decided to add a small compartment for a few bills, coins or flash memory cards. The drawer is very tight and there is no way to accidentally open it. The credit card compartment can hold 3 or 4 cards…

Clothing sticky lint roller/brush holder/handle

Info: handle for cylindric lint sticky rollers many manufacturers copy the same design so here is a holder for many of them can hold tightly also the transparent outer part (cover) if you have it reinforced parts which can break (and it…

shelf for small things

A miniature shelf allows you to place small things. PLA/PETG plastic. Consists of 3 or 4 shelves fastened with 12 racks. 4 plugs are used as legs and top covers I think the assembly will be clear from the above drawings. Parts are held…

Knitted Pot (remix from belitcha's design on Thingiverse)

I redid this knitted pot model from belitcha so that you don't have to make any printer adjustments for it to print as a cup, and I added some thickness along the inside walls so that it's solid instead of only the reverse of the pattern.…

Julie 3D Print Name with pencil by nikkibarba17 via Thingiverse

Instructions for print: faces_segment = 6 textstring1 = JULIE textstring2 = textstring3 = HiddenText = TAYA add_a_special_character = right special_character = Pen distance_special_char = .5 textsize1 = 16 textsize2 = 16 textsize3 = 16…

Bathtube Toy - Little Bathing Chick / Badespielzeug - Kleines Badewannen Küken

As you can see, chicks can also swim. Add a little less ballast than I did so that it can float more easily if you like. I used 7g (2 Allen screws M5x16) and printed with 0.2mm layer height without support. Art design by Hannah. Happy…

Parametric USB SD microSD card organizer holder by mbrami on Thingiverse-FreeCAD

I needed to be able SD storage devices but didn't want to limit myself to a fixed number of devices. I found this model by mbrami on Thingiverse and it allows for a different type of device to be used in each location, with the number of…

Ikea Ordning cutlery drainer riser thingy

I was sick of having cutlery soaking in water so I made this riser. It's meant to work with ORDNING Stainless Steel Cutlery Stand and the EKIPERA plate. It prevents drying cutlery to come into contact with excess drain water. Edit feb…

Keyswitch Opener (remix from Thingiverse)

Used PETG. Print with (3) perimeters. Standard infill. High end of PETG temps to ensure solid layer adhesion. Press your keyswitch down and the top will release. This design is much more sturdy and less prone to breaking vs the original…

Stand for Withings Body Cardio Scale and BODY+ (upright position)

Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…

Coffeepot from the Design of Everyday Things book cover by Don Norman

At the original height of 30mm can be printed with 0% infill and no supports. The sturdier version of the file has a closed teapot spout. Let me know if you have ideas to improve the model or print speed. ----- Design of Everyday Things…

Crocodile Clip multitool for towels or anything

This crocodile-shaped clip allows you to hold towels or whatever you need. The gear slides along the tail making the crocodile's "mouth" squeeze harder. The clip allows you to stick the crocodile in the sand. The crocodile's tail also…

Pregnant Bathing Elf Woman

If you like the things CarlCreates makes, please consider to become his Patreon: https://www.patreon.com/carlcreates

3M Command Strip Coat / Clothing Hook One Piece

Modified to work with the picture hanging Velcro Command strips. *Warning don't use with non-Velcro strips

Something Arabic Alphabet

Çeşitli işlemler sonrası fotoğraftan yapılı

Box Thing -> Parts Box with Separators.

Parts Box with Separators - Tight Fit Lid. Made with fusion 360 (Testing prebaked tolerances with filleted fits) Updated gcode for bigger print. Small test version worked well. Printing big one to see if tolerances keep

Stackable sorter (Storage of sewing and other small things.)

The sorter allows convenient storage and sorting of small items. The individual tiers can be stacked and the upper part of the sorter can be closed with a lid. Updated. Added a lid with holes, for mounting the top handle.

42 - Version42 (and everything explained!)

The Answer. This one : 42 and some Gears This way too complicated print uses a set of gears to rotate segments into place to show the number 42. The Explanation : If you have looked at any of my other "42" prints you have probably already…

Bandana Face Mask Exercise Breathing Aid

When exercising with a face mask the fabric is prone to pulling against your mouth when breathing in, making breathing difficult. This device maintains a space between the upper lip and fabric, making it easier to breathe freely. Print…

Notion tray for Belitcha's knitted pot (Thingiverse)

I designed this tray to neatly fit the Knitted Pot by Belitcha (as well as my remix of her design), and it includes a section for placing small notions such as stitch markers and yarn needles to keep all your necessities close while you…

Dewalt 18v XR Drill Wall Mount (from Thingiverse)

This is a repost from https://www.thingiverse.com/thing:2900781 Here is the original summary from Thingiverse. Note that this is not my model, I'm reposting it since it's a great model and wanted to share it with the Prusa Printables…

Team3 - Inlay and monkeys (monkeys by Cathy29 - thingiverse)

Inlay is design by myself The monkeys comes from thingiverse from Cathy29 make sure the inlay is fitting - measure your box in the imags you can see my slicer settings (ground layer 0 - wall 1) works for the green and the pink version of…

Reconfigurable Portable 3D Pinball Thing

First look at 3D pinball I'm making out of old door latch solenoids that have been lying around doing nothing. As a kid I wanted to make a pinball machine. So with just a few solenoids, a 3D printer, and some bits and pieces I'm going to…

a tray that is remixed from thingiverse

just a tray for literally anything

Curator Round Thing

Wall decoration piece, includes inclined hole for a nail. Horizontal with = 150mm, scale according to your wishes (and print bed size). Best use lower layer sizes to get a finer incline in the middle. Inspired by…

Thingiverse Liftarm 1x2

Liftarm 1x2

A box, for anything ;D

This is my first upload. Please, send me some advice if you wish. ;D As you can see, you can print it without any support :,D . The hinges are working well, and the whole box is a massive thing!

Babylove (Feuchttücher) wet wipes box for buggy [or everything with Gopro mount]

Alle Eltern brauchen schnell ein Feuchttuch wenn es Eis, Schokolade oder andere Schlabbereien gibt! Mit einer Hand (in der anderen Hand meistens schmälzendes und tropfendes Eis….) kämpft man die Feuchttücher hervor aus dem unteren Fach…

Ruger EC9s Inert Magazine - From Thingiverse

I searched for a Ruger EC9s Inert Magazine to help a buddy of mine with cleaning, but I could only find it on Thingiverse. From Thingiverse: Summary Ruger EC9s Inert Magazine. Ruger EC9s has a magazine disconnect feature, so in order to…

Nunchuck Wii adapter for CNC motor driving housing REMIX of https://www.thingiverse.com/thing:951963

Nunchuck Wii adapter for CNC motor driving housing In order to pilot the 2 stepper motors of my OPENSCAN scanner, i use a wii nunchuck connected to the CNC shield of the arduino remix of https://www.thingiverse.com/thing:951963

Steve Harrington from Stranger Things.

Steve Harrington from Stranger Things.

gear rail fidget thing

While playing with gear designs I came up with this idea, and I found it interesting enough to share. The gears can move side to side, but they don't fall out. After printing the 60mm version I also uploaded two longer ones (80mm and…

Pencil holder thing

just another remix

Demogorgon by Stranger Things

Commercial use is NOT allowed for this model

Demogorgon (Stranger Things) - Relief Sculpture

Demogorgon (Stranger Things) - Relief Sculpture Infill: 5% gyroid Supports: NO Layer: 0.12 Feel free to download it too Vecna (Stranger Things) - Relief Sculpture…

Wednesday Addams - Thing Hand Top Fix

Model of the 'Thing' hand character from the Wednesday TV series.

Stranger Things - keychain

Simple keychain from original Netflix series - Stranger Things. Logo and 3D model is my own design. This model is 2 colors project - black and red. I've printed from PETG - You can use PLA too but please change settings. Keychain size…

Book Thing: A Book Page Holder (v2)

Book thing helps you hold a book's pages open when holding it in one hand. This works two ways: On your thumb when holding the bottom of the book, or On your index finger when holding the top of the book. Book Thing V2 is now double-sided…

Everything Presence One - Official Case

The official case for The Everything Presence One - available to print for yourself! Featuring a stand that allows for mounting in all directions, holes for wall mounting, cable passthrough holes and a completely tool-less design allowing…

Blank Elephant (by Amao chan on thingyverse)

This model was created by Amao chan over on thingyverse. Check out the original creator: https://www.thingiverse.com/amaochan or the original post: https://www.thingiverse.com/thing:6086143 This is just a reupload!

Wednesday Spoiler Thing

Updated model with spoiler scar

planetary gear fidget thing with three-teeth-planets

Who hasn't seen a print-in-place herringbone planetary gear… probably a version from Emmett . However I recently developed a different method for those gears which allows planet gears with only 3 teeth (actually also with 2 teeth, but…

Lord of the Ring - The One Ring dice bowl by Skar84 from Thingiverse

Lord of the Ring - The One Ring dice bowl by Skar84 - Thingiverse This is a reupload because of course thingiverse is so broken the page and file is gone AND you cant even log in anymore. All credit goes to Skar84

Demogorgon - monster from the movie Stranger Things

Hello, Today I have Demogorgon for you - a monster from the movie Stranger Things. It is a really faithful copy of the famous monster from the movie. It is also suitable for coloring, or for a diorama with the theme of the upside down…

Addams Family - Magnetic Thing

To be placed on the fridge, using: 4x 8x3 mm magnets or 4x 8x2 mm magnets. 4x 10x3 mm magnets. 4x 10x4 mm magnets. 3x 20x5 mm magnets. 1x 40x7 mm magnet. and without the magnet holes download another model here:…

Will Stranger Things Funko Pop Kinder

Design Concept This model draws inspiration from the iconic character of Will from the popular TV show Stranger Things, rendered in a cute, chibi-style figurine typical of Funko Pop collectibles. Purpose The model serves as a collectible…

Vecna (Stranger Things) - Relief Sculpture

Vecna (Stranger Things) - Relief Sculpture Infill: 5% gyroid Supports: NO Layer: 0.12 Feel free to download it too Demogorgon (Stranger Things) - Relief Sculpture…

Thing Addams Family

Whenever Halloween comes around I just can't help but make a bunch of halloween stuff ahahah Oh! This model is painted and is not a multifilament print! If you like this model please check out Lady Fingers,in my other recent models. She…

Addams Family Thing keychain

Addams Family Thing keychain printed 0.16mm

Stranger Things Kinder Joy Stand 24pcs+Mindflayer

UPDATE: Complete with Mindflyer and 2 figure stands. A 22-piece stand for the popular Stranger Things figures, with the logo in the middle.A 22-piece stand for the popular Stranger Things figures, with the logo in the middle. PLA 0.2…

Everything Remote - ESP32 Powered Universal Remote

🎉🎉 PARTS KITS ARE NOW AVAILABLE HERE 🎉🎉 Build your own universal smart remote! This project turns a simple ESP32 and tactile buttons into a powerful, battery-powered remote for Home Assistant — perfect for media control, lights, scenes…

Dustin – Funko POP! figure, from Stranger Things

Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…

Minecraft Tools with Keychain Hole Reupload from thingiverse

Keyrings available here: https://s.click.aliexpress.com/e/_DmRrLOZ

Everything Holder

A simple multi-purpose holder designed for everyday use in the kitchen, home, or office. It can be used as a knife rest while preparing food, a phone stand, a pen holder, or a support for utensils and small tools. The minimal and stable…

motorcycle chain lube thing for 520 chains

Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…

Stranger Things Demogorgon

Introduction This model was designed by my son for a 3D modeling course in high school. (He got 2nd place in the Senior Art Show!) It is his interpretation of the Demogorgon monster from the Netflix television series “Stranger Things”.…

Minimal Stand - Tablet, Laptop, Books and Anything In-between.

It's a minimalist stand, with a customizable width. Perfect for anything. Need More Slots?: Prints this Divider separately. Have all the slots you want! Adjust The Width: You can stretch the base model in z-direction in the slicer for a…

Low Polygon Mask easy breathing

This item is a low poly face mask perfect for masquerades or Halloween. It has an open mouth and holes for the nose so you can breathe ease, although you might sweat. There are slits on the sides for an elastic head strap. It's sized to…

Eleven – Funko POP! figure, from Stranger Things

Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…

Another Spiral Cone Thing

It's an easy print spiral cone thing. Everyone else made one so here's my version. Please like or upload a make!

Stranger Things Silhouette Art

Stranger Things Silhouette Art No supports needed, the back slots into place securely. Print more than one back so that you can change the mood by changing the background. Make sure 'print thin lines', 'detect thin walls' or your slicers…

Spider-Man PS4 Faceshell + Interchangeable Lenses by HappyMoon on Thingiverse

I've seen this Spiderman PS4 faceshell on thingiverse and I wasn't sure if HappyMoon had uploaded it to Printables yet or not so I figured I would share it with this community in case anyone hadn't seen it. It looks like an awesome…

Wednesday Spoiler Thing Pencilholder

I love this Model, so i remixed ist in size and hollow it out for pencils for my desk. I hope you like it! DANGER: partly thin walls available, make sure if your slicer handles them well! my print settings: Rafts - Brim: YES Supports: NO…

speakerman skibidi toilet thing

found it on the toolbox (toolbox has no copyright laws)so now its mine i dont know if u can print it but it should work supports are recommended also printing it standing up is also recomended MORE MODELS ON SKIBIDI TOILET ON MY ACCOUNT

Addams Family Thing but a pen pot

Transform your workspace with this unique pen pot inspired by Thing from the Addams Family! Designed for high-detail, unsupported 3D printing, this model combines functionality with a touch of spooky charm. Perfect for fans of the iconic…

Vecna – Funko POP! figure, from Stranger Things

Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…

D&D Miniature: Demogorgon (Stranger Things)

Straight from the darkest dimensions, this model captures the horrifying appearance of the iconic Demogorgon. The figure stands in a disturbing, slightly hunched pose, its long, slender limbs and fingers outstretched in a gesture of…

Mind Flayer from Stranger Things

This is a the shadow monster (also known as the "Mind Flayer") from the Netflix series Stranger Things. He is challenging and will test the bed adhesion limits of your printer! No rafts or supports are needed but might be useful if you…

Demogorgon – Funko POP! figure, from Stranger Things

Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…

Max – Funko POP! figure, from Stranger Things

Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…

DEMOGORGON STRANGER THINGS HORROR CREATURE – HIGH-DETAIL 3D PRINTABLE MONSTER STATUE

This highly detailed Demogorgon-inspired horror creature is designed for fans of dark sci-fi and monster aesthetics. The model features: A dynamic attack pose Extreme surface detail for skin, muscles and claws A menacing flower-shaped…

Thing Apple Watch

Apple watch charger stand

Stranger Things Demogorgon - Getestet und Optimiert

🚀 Stranger Things Demogorgon - FDM-optimiert! Getestet mit Ender 6 + Klipper + Bondtech Direct Drive + 0,4 mm Nozzle 📏 Empfohlene Skalierungen Höhe Details Stabilität Druckzeit 6cm Filigran Sehr Gut 2h 12cm Optimal Perfekt 8h20 15cm Sehr…

Thing from Wednesday / Addams Family Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: No If you like my work consider Buy me a coffee 😊

Vecna Bust from Stranger Things

Vecna bust Sculpted in blender using remesh method High poly model not optimized This is my first model for 3d print My print settings: Material: PLA Nozzle: 0.4mm Layer height: 0.2 Infill: 25% Tree supports: Yes only touching buildplate…

Keychain Stranger things

Lleva el vibe del Upside Down siempre contigo con este llavero inspirado en Stranger Things. 🚲✨ El diseño a dos colores resalta el logo con un contraste rojo y negro súper llamativo, perfecto para colgar en tus llaves, mochila o impresora…

Will – Funko POP! figure, from Stranger Things

Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…

Stranger Things Headphone Stand

By request a Stranger Things Headphones Stand Prints in two parts and slots together Print the top with supports touching build plate and with detect/print thin lines checked. @3DPrintBunny

Silicone / Acrylic / Caulk Smoothing Tools

Useful tools for smoothing sealing lines and caulking lines, which helps save sealant without masking tape when you apply it for sealing work. They are suitable for most types of sealant such as DIY crafts or floor silicone sealant,…

Things Wednesday Addams Family Stiftehalter Pecilholder hohe Qualität

Ich habe einen Stiftehalter Design im Design von Things Wednesday Addams Family.

Eddie – Funko POP! figure, from Stranger Things

Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…

FPV *Pod* Mount: for O3, Walksnail, anything, Max-FOV, no props, max protection, any quad, any cam!

Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…

Steve – Funko POP! figure, from Stranger Things

Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…

Volkswagen Thing Kitcard

Introduction Here's an interesting one, the Volkswagen Thing. The Type 181, as it was originally called, started as a cheap military vehicle built for the West Germany in the late 1960s. It was a mashup of parts from cars like the beetle,…