1,782 models
Anchor that screws into drywall, with internal thread for 8-32 bolt. Simply drill a ¼" hole in your drywall and turn the anchor in with a Phillip's screwdriver until the end is flush with the drywall. The threads in the center hole accept…
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
Keep your cat fascinated with this design of a roll-around-and-chase cat toy that uses threading, allowing you to take the two halves apart and swap out treats or other objects inside. The two parts are designed so that they can be placed…
A little bigger than the original to accommodate a (1.1Kg) 22cm roll and Threaded Inserts. I made the design from scratch. I also changed the inserts from hexagonal to cylindrical with threads. This way rolling the paper should be…
This is a simple tri-glide webbing slide for 1" webbing. There is a threaded and no-thread version. Update: versions are also available for 30mm, 1.5", 50mm. Design parameters: The webbing slots are sized for 1" webbing (actual width is…
This threaded adapter converts from 3/4" garden hose female to 15/16" faucet male. Make sure to use a washer on the garden hose side. There are two version of the .stl file, one with a built-in supporting ring (break it off after…
M4, M5, M6 T-Nut Assortment for following Alu Profiles: - Rose und Krieger - Item - Flexlink - Bosch / Rexroth - Minitec Thread is included. Can be printed with 0.15mm Layerheight. OnShape Links: Bosch/Rexroth…
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Introducing the Telescopic Table with Threaded Security: a compact and portable stand designed for maximum stability and convenience. This innovative table features telescopic legs that can be adjusted to three heights: 180mm, 315mm, and…
Large nut captured on threaded rod that you can move back and forth to keep your hands occupied. Printable at 0.2mm layer thickness
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Mount select TP-Link camera models on a standard quarter-inch thread using the existing twist-lock base. This is a copy of the existing twist-lock mount, but with threads for mounting on a tripod or similar, if you don't want to drill…
I made this to hold my threaded insert tip set. It's stackable when filled, and the bits are arranged in size order (I've given a bit more space for the larger bits). They are arranged clockwise in increasing size from the bottom right.…
Printed with spectrum pla silk taff pink
Remix of PETG Prusament Clamp and Photo Clamp with added 1/4-20 UNC threaded holes for more mouting options.
1x1 Gridfinity holder bin for threaded insert soldering tips Soldering tips for threaded inserts M2 2-56", M2.5 4-40", M3 M3S, M4 8-32", M5 10-24", M6 1/4", M9 5/16" You'll find it as a kit anywhere amazon aliexpress banggood ebay temu .…
This is an adapter, to use a pole with cone threaded connector (as e.g. the Vileda ones) with the M24 connection mops, commonly used in Greece. It is a combination of the “ Vileda Mop rod, Coned Thread Connector” designed by Skaran (…
This is the part of the IKEA OMAR shelving foot that slides over the pole. It is useful for attaching threaded castors. Two versions are available. One with an M8 1.0 thread (same as the original part) and another with an M10 1.5 thread…
Can be used for other use cases too. Both sides have a M8 thread. I recommend printing this with 100% infill or enough perimeters.
It's a small, simple and quick print. Normally you need two sleeves for a door.
Printed using ePLA. use support as in the attached bgcode or use your own.
Modern Easter bunny decoration. This model stands at 6 cm tall and can be scaled up according to your preference. Its interior is hollow to conserve filament. If you have a textured plate, try to lower your Z offset. Wishing You a Happy…
Hexagonal Storage Boxes Set is a versatile solution for keeping small items organized with elegance. Each box features a threaded round lid with a knob for easy handling, ensuring your items stay secure and accessible. Available in three…
Printed using ePLA. Support is required as already planned under the attached bgcode file, or use your own. Threads are NPT type.
I have a tank that supplies a drip irrigation system on my balcony. For months, it sat with a tube and wire coming out directly with mere plastic wrap protecting the water from airborne pests like mosquitoes. It was an ugly and cheap…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (AP2 Style)! The model is not perfect, but it is better than the Weller version if you have an AP2 adapter I can't remember how much it weighs and how long it takes…
I've got lots of sturdy painters poles, so I didn't want to buy another pole for this pond leaf skimmer. An adapter is available from @Mustang52_135279 , but I wanted thicker walls and the solid model wasn't available to remix. This…
Hello, Here's a quick faucet knob. My old one was made in cheap plastic and broke. I wanted something stronger, so i added a M4 threaded insert. I would recommend printing this out of PETG, ABS or ASA. Add some support underneath the top…
remixed the great design by CrazyTim so that you can use a threaded insert and a screw for assembly
EN : This plastic part was missing and impossible to get it back from IKEA side (even after asking some salers), I decide to make it my self and here it is, just be equiped with a M5 nut to integrated it to the print after the “color…
Modern Easter bunny decoration. This model stands at 6 cm tall and can be scaled up according to your preference. Its interior is hollow to conserve filament. If you have a textured plate, try to lower your Z offset. Wishing You a Happy…
EN: The funnel is designed for original 800-gram “Traiva” silicagel container. No supports needed. CZ: Trychtýř je navržen pro originální 800-gramový silikagelový obal značky “Traiva”. Tisknout lze bez použití podpěr.
This allows you to carry two controllers and spare batteries wherever you need. Print with PETG for strength. Prusament PETG Neon Green Transparent is pictured. Use aprox. 135mm (or 5 and 5/16 in) of 1/4in threaded rod and screw directly…
Threaded hose adaptor from a common shop vac hose size 1.625" (1⅝", ~41-42mm) OD to a smaller random size 1.5275" (~1 17/32", ~38.8mm). In my case, I needed to go from a smaller hose for this “Shop Nation” miter saw dust adaptor to a more…
A Gridfinity tool holder for five melting aids for threaded inserts. Mine were made by Turmberg3D, I ordered them from Amazon. Note: The outer diameter of the melting aids is 6.0 mm, and they fit quite well, I think. ----- Eine Gridfinity…
Update 19.01.24: Added pins on base holder to get a pre-tension against some possible vibrations! Hi, i made this because all available designs did not fit my needs which are: perfect fit on Prusa MK3/S+ with enough space to moving axises…
Here's an improvement of my other shaker model that I have. Threaded caps and also a pillar in base to agitate salt and pepper and hopefully prevent clumping. Primer just pops in, tapered end in first. Also have a case with no primer…
Print with PETG and 0.1 mm layer height for best threads, but PLA and 0.2 mm layer height also works.
This box was made for calibers, as well as for dies and similar items Don't forget to scale the model to your needs in the slicer, and don't forget about tolerances :)
This model is a stabilizing end cap designed for diy filament dryers that use a threaded rod as a spool holder. The part holds a bearing inside the body, which helps the filament spool rotate smoothly while keeping it centered on the rod.…
This is a large threaded egg. It was designed to be large enough to hold one of McGybeer's articulated dragons (printed at the default size). Looks particularly good in multicolor coextruded filaments. It will print OK without supports,…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
Made for Schrader type valve. (the most common type) Fits mountain bikes, road bikes, cars and motorcycles. 0.15mm tolerance on the default model and 0.05mm on the tight version Optimized for 0.12mm layer height. Please, share your…
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
This model was missing from Printable so I upload with credit to the original creator under Creative Commons.
Knurled Modular Threaded Stackable Container. 100mm outside diameter. 20mm, 40mm, & 60mm side wall height containers (with bottom) and expanders (without bottom). Top and bottom can be used to make a 40mm tall container. 3mm walls. Print…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I needed a hollow, two-part,…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . By request, here is a solid,…
Use case a cream jar for hand cream I have printed a whole bunch of these cute little threaded containers (Also because they are a great benchmark to check if your printer has a clean and even extrusion, which is apparently not always the…
A small jar to store some goods. There are jars with width 30mm and 60mm. The 30mm the have hights 15, 20 and 25mm. The 60mm width jars come in 20, 30 and 40mm height. After printing you should screw the jar and lid back and forth and…
I've modeled this container in blender. It actually threads surprisingly well. (water tight) Print Settings Supports: No Resolution: 0.2mm Infill: 20% Filament: Spectrum PLA Blue lagoon Notes: Printed with 50% original scale.…
I've applied harvdog92's threads from his threaded remix of Lalala65765's Dragon Egg box Chi to the Dragon Egg box Mi . I also added a chamfer to the inside lip to allow for printing without supports. Print both parts right side up, in…
Category Part Quantity Fixings M5 Nut 6 Fixings M5 Washers 10 Fixings M3 x 10 CHS 10 Fixings M3 x 20 CHS 2 Fixings M3 Washer (optional) 8 Fixings M3 Nut 10 Fixings M3 x 8 CHS 1 Fixings M5 x 30 BHS 6 Fixings M5 x 8 BHS 10 Fixings M5 T Slot…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
Remixed to thin the walls for printing large. The threads remain the same. The wall thickness at its thinnest is approximately 1.5mm. The part measures 253x253mm XY, 198mm and 189mm Z. This is approximately 540% scale from the original.
This is an improved version of harvdog92's threaded remix of Lalala65765's Dragon Egg box Chi . I've added a chamfer to the inside lip to allow for printing without supports. Print both parts right side up, in other words, the bottom…
I've worked on two editions of remix of the excellent push block design by Trobinou (January 23, 2017). One of my remixes does not make use of threaded inserts, while the other (this one) does. (I have not yet posted the…
Prints perfectly on .2 layer height with PLA. Holes are perfect for keychain threaded inserts from amazon. I left these in here as negative modifiers so they can be adjusted based on your specific tolerances. You can probably get away…
Hollow Threaded Easter Egg with Voronoi texture
My own version of the lego wall hanger set, optimized for 3d printing without any supports
Mini Trashcan Keychain Little trashcan that can be used for storage, decoration, or as a keychain. Maybe handy to hang on your backpack or purse. The lid is threaded. Universal slicer settings: Material: PLA Nozzle: 0.4mm Layer Height:…
This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. For building a filament dry…
This a simple cylindrical jar with a threaded lid. I printed this out of PLA at a 0.25 layer height, but it should be fine out of any material . The inside bottom of the jar is rounded to prevent contents from getting stuck. The mating…
What is galling? galling noun : a type of wear caused by friction between metal surfaces, often leading to parts sticking or seizing. Example: "Galling can lead to a nut and bolt binding under high pressure." adjective : extremely…
I designed this Venturi pump to see if it'd work for fertigation in a drip system and it seems to work quite well. Though I still need to test its longevity. I printed one in PETG and one in PLA; both seem to work fine. I suggest using…
i made an adapte for a 1/2" inside to 3/4" outside Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print.
A handy case to hold your threaded inserts and installation tools. It's designed to fit the tools sold by CNC Kitchen and the labels match the sizes they sell. I printed in white and black ABS and it came out really nice. You'll need 6x…
There have been several threaded containers out there, but most of them have not provided the Fusion360 file to make changes. This model should be easy/intuitive to change. This model has custom round threads and has a constant inner…
I remixed this Fallout Fusion Core so that it's threaded and can store things. I will modify it further to hold a USB battery (5000m). Update: 7.9.18 - Added a shim ring at .5mm if your + and - signs don't line up. Print this and place on…
A replacement threaded end for a paint roller extension pole or broom, mop, or duster handle. This fits a hollow pipe with an inner diameter of approximately 0.8" / 20.4mm. The source is included if your pole diameter is different. It…
This is a board, with a bunch of threaded holes. There's also a screw. The screw threads into the board, as well as being able to thread into another screw's head. The threads are M15x1.5. This definitely isn't as nice as a much thicker,…
This is a cool little threaded Easter egg. It has threads so you can open it put toys or candy inside. It also prints without supports. This egg is the perfect size to hold a real egg inside. If you enjoy this model, please give it a…
Threaded wall board for organization its 180x180 the threads are 10mm x 1.5 iso metric that are 20mm apart c/c. hopefully we can get some good remixes going
I've needed screw on lids for bottles and jars several times since I started 3D printing, I've always created a one-off design each time. I've used my experience and knowledge about making lids along with my experience building robust…
A tube box with a cap. You can screw the cap on the box. Quite simple concept. In openscad, you can choose the size of the box. There are also some options: - adding grip on the cap; - adding holes on the bottom of the box and/or on the…
This is a remix of the Voron 2.4 Bowden retainer that features an M10 thread at the back for a fitting that retains your PTFE tube . It's designed so that the fitting can be screwed into the back, and the tube pushed all the way through…
This is an attempt at an Acme threaded C-Clamp. I do not know how well the overhang of the Acme threads will work. Updates v1 Acme thread printed perfectly at 0.25mm Deleted M12 version v2 is more like a real clamp including swivel pad…
Repair set for broken drying rack with M4 threaded inserts I saw the repair kit for the broken strings on a drying rack by STxS . I tried it and it fitted for my drying rack. This remix replaces the M4 nut holder with threaded inserts,…
Threaded insert press for heat setting threaded inserts. Press has a rack and pinion desing with three 12 or 8 mm rods and LM12LUU or LM8UU bearings, so you can precisely adjust height of insert and you get perfectly seated threads. The…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (Weller Style)! CNCKitchen.STORE…
Great for festivals and concerts to carry earbuds, keep your tokens safe or simply use as a portable ashtray. Excellent conversation starter. Height: 10cm / Diameter: 3cm If you’d like to support my work, leaving a ♡ like ♥ or even buying…
I made these models to route an air hose with a 50mm inner diameter . It can also be used with my CNC spindle dust shoe or with my vacuum nozzle . Part list hose-adapter-46mm-38mm.3mf Simple straight adapter. Both dimensions are outer…
Find other STLs in the original model If you' re searching for a case which fits a RPi and further electronics, please find this Model If you're using an 800mm x 800mm panel for mounting AND you're using the new feet which are mounted…
The vinyl caps that I have had for different SMA connector radio devices I have were always falling off. I made these with the correct ¼-36 thread so that they stay on and don't fall off. Print with thin layers for the best detail on the…
Dose mit Gewindedeckel. Durchmesser 80 mm
A Harlot barrel with 1/2-28 right hand threads. There is also a file for a ½-28 thread protector. The original designer worried about the weight of a muzzle device on the end of the barrel. Well fitting parts and a quality barrel latch…
Threaded oil funnel to fit most 250, 350 & 450 KTM / Husky / Gasgas motocross bikes. The funnel threads directly into your existing oil reservoir for easier oil refills. Air vent integrated into funnel to allow for fast pours with no…
Update 02/12/2021 I improved the model to be more robust and to be easier to customize. Thanks to the user nicktalavera for his ideas on this! Lid added! I also included a few prerendered STLs ready to be printed if you have an Ikea LACK…
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
A classic looking Easter egg, with a hollow cavity inside, and setup so that it can be printed without supports . The “ring” is designed so that it will thread securely onto the bottom half and more loosely to the top, allowing for easy…
Threaded insert M3 It's not as good as original metal one. But its a good option when you don't have metal inserts (and need it now!) or when you are going to shread your 3D printed prototype (and you don't want to pull it out) How to…
Easy and fast to print! No supports needed. Scale it up or down as you need. I printed it with 0,15 mm layer height (0,4 mm nozzle) and it came out fine. I didn’t need to use a brim, but if you have problems with bed adhesion, use it for…
This is just a simple 1 1/4" (31.75mm) diameter passthrough to get a cable through sheetrock. It just threads in after you drill out a slightly undersized hole. Drill a 1 in (25.4mm) or 1 1/8 in (28.5mm) hole. The threads are 1 1/4"…
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Make sure you print fairly accurately. You don't need any support material anywhere. if you were to do this, it is possible that they will no longer fit together due to the small particles. I hope you learn a lot and have fun with these…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame There is no pictogram for threaded inserts as far as I know of, so I came up with this design. Print it…
