341 models
NUMBERS AND LETTERS 150mm(height) X 110mm(width) X 2mm(thickness). Resize in slicer as required. Printed on ender 3, ender 3 s1 and bambu lab x1 using PLA Easy to drill into. Make small guiding holes if screwing in.
I got the idea for this, after seeing @yaniv_193818 's great case for the Tinkerboard S. With the heat sink, I couldn't do the sliding top, and also I got the idea to make this organic-looking shape. Prints well with PLA, .20 speed or…
the knobs have a M4 thread. if printed in one piece with a color print, it might be possible to glue it on something. But i would recommend using a M4 bolt. Printing layer height 0.20mm infill 20% grid perimeters 3 The Wrench G-code is a…
Žáci v terénu a pomocí vybraných nástrojů změří a vytvoří model základní školy + okolí (online nástroje, fotografie, laserový dálkoměr). V 3D programu Tinkercad a Fusion 360 vytvoří reálný model ZŠ.
I remixed the skeleton parts in Tinkercad into a simple kit card making it great for kids and party's. I made to the links connecting the bones only two layers thick at 0.2 layer height, making for easy removal. Check out the original…
a Tinkerbell sculpt. print no less than original (which is in inches) or will lose fingers. fingers are very fragile. take great care. can be printed smaller if using a resin printer. use supports. Category: Sculptures
Theresa is one of the main characters from our game Kingdom Come: Deliverance. She was a citizen of Silver Skalitz, where she lived and worked at her family mill, and later an inhabitant of her uncle's mill in Rattay. Printing The model…
Design Concept This Tinker Bell model showcases the character in an iconic pose, bringing the whimsical fairy to life with detailed features and vibrant colors. Purpose The model serves as an excellent decorative piece for fans of…
I have lots more remixes on the way, but for now, here's Tinkerbell. This model replaces most of the Mini 13 armor, you will still need to download mini13-armor-head.stl as well as the MINI 13 frame parts. The wings are super easy to…
Build is self explanitory, with ball and socket joints the entire way. Part one has main body limbs and head Part two has optional claw attachments as well as the tail Must disclose that this is just off the tinkercad community shapes by…
Thanks for stopping by! This page has two uses: one is for you to access an equilateral triangle SVG for your TinkerCAD profile to create knurling, and the other use is for you to print a quick torture test of a cylinder with knurling…
For those of us who wear glasses, being without them is a no-go! My old pair broke a while back, but I decided to "see" if I could fashion a repair using Tinkercad. I appreciate that these aren't suitable for everyone, as they only suit…
This collapsing Sword has been completely designed in TinkerCAD.
Just 3D print the 3MF file, you have GCODE for Prusa MK3S. No need for support. Two versions: Just the case. With holes on the base.
The Braccio Robot arm from Arduino is a fun kit to get started in using robotics. But, it lacks any sort of control scheme. That, you're expected to come up with yourself. Well, I did that. You can use the included code to control the…
I designed this keychain in Tinkercad. If your printer can print small bridges (most can), it can be printed without support and right side up, otherwise it prints best upside down with supports. You can change the name in tinkercad…
just a little fix of the OG skeleton that I made with hands this time I give credit to TINKERCAD creators for this file
This is Tinker Bell figurine. I made this originally in PC (polycarbonate). Fingers are fragile and are missing great resolution.
Remix of the two files below https://www.thingiverse.com/thing:4834785 https://www.thingiverse.com/thing:4538885
Should press fit with moderate pressure, tougher fits can tap gently with a mallet. Printed on Flashforge Finder with PLA.
Easy to print. No supports needed, 3 parts. Click door into frame. Can be opened. Can be placed against skirting board, on tree or in dollhouse. Think of other applications yourself.
Just Go On Tinkercad And Look At The Model, Idk How To Describe Or Post A Picture On How To Build Certain Figures!
Remixed from LXO's Lowest poly The thinker easiest to print version. Just added a nice little toilet. I used supports when printing it, but they may not be needed if you scale it down a bit.
This is an ant I made using tinkercad. I recommend printing in petg as the sockets sometimes split when printed in petg. and the mandible ball is at great risk of breaking with pla. You need one of everything except feet you need three…
Articulated samus aran from metroid, uses tinkercad joints
Victorinox Deluxe Tinker Beltholder This is a beltholder for your Victorinox Deluxe Tinker. You just need to clip the Deluxe Tinker in the holder to fix it. Your EDC is reachable with this holder. Have fun !
These create perfectly evenly spaced ports for sirens in Tinkercad! You can also just use these to help u find what width to make your block to cut the ports. That is preferred, so that the port walls are straight instead of angled…
for fun only
I made this for myself, but I also wanted to share my set up. please comment and make. Thank You! (Details Below)
Please read this before any use of the font. ----------------------- This font is for PERSONAL USE ONLY: Do not under any circumstances use the font in public media unless permission is given from designer 3D-Druckwelt or legal reseller.…
https://youtu.be/w_CEYVwYOsg In this step-by-step video I am showing you how to create an awesome looking vase using Tinkercad even if you have never used a CAD program before. I have tried to talk and act so slow, that you are able to…
Taj Mahal (designed in tinkercad) Category: Models
This is Carbon 13 assembled in tinkercad, so you can just copy this project and make your remixes using it instead of wasting time aligning the parts digitally. LINK HERE:…
Chopped off the floating vertices that are just below the toilet, and pushed the left toes up a bit. This way the toilet bottom should be flat on the bed. I have not printed this one yet so don't take my word that it's better. Edit: I…
A re-creation of the standard plastic tinker toys plus a few new versions. Designed with my niece. Use with 0.375" dowel rods. These can be printed with PLA and any settings. I chose a 0.4mm nozzle, 0.2mm layer. 2-3 walls, 4 top & bottom…
Link to Tinkercad project https://www.tinkercad.com/things/1z1f92oOqi9/edit?sharecode=yHL9wXwKidF7HVuRFtzxVApCed2DniA5pIUE4zTtfOI
a cute octopus toy
ToyBox Large Filament Spool Holder
This is a simple guide to make your own 4x4 sliding puzzle - whether it is a map or not - using Tinkercad, thanks to the model @Nikolaos Babetas uploaded of the puzzle itself without any image on top of it. The aim of this remix is to…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
Klaatu Barada N… Necktie… Nectar… Nickel… Noodle It's an "N" word; it's definitely an "N" word! That's what happens when you don't listen to the druid. You get a mutant zombie apocalypse. You're welcome, happy Halloween, everyone.…
Hii everyone, I asked a friend if she would like to have a 3D print. I did that, because I wanted to get familiar with Tinkercad. So she asked for a cat and this is how it turned out. This is also one of my first models so I was really…
Tinkercad Shoe Door Stop made by my 8 year old.
This is the ultimate vise for every tinkerer, crafter and handyperson working at a table. If you're soldering PCBs, repairing watches, embossing leather, modelbuilding or just repairing and trying things you always need another tool to…
This is a model swanandmunishwar28 (https://www.tinkercad.com/things/lyyOkAHoclN) on TinkerCad. It's a really cool design so I wanted to test how well it printed. The design is called Jet Pack, but it looks more like a Compact Fighter Jet…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/eGDjOnEIHqO Print instructions Category: Animals
These tools are designed to be used for adding screws, nuts and magnets to Tinkercad creations. These are designed to be imported into Tinkercad and then converted into holes. 6mm Magnet - Rear Push.stl Press fit 6mm diameter magnet which…
inTinker's stringing calibration. Single.
Tinkerbell on a flower as a figurine and night light . The model is around 8cm high. I created it as a small present/give away for a children's birthday party. The pedestal has a cylindric opening: 24mm in diameter, 17mm deep. So that a…
These models are replacement parts for the Tinkertoy Construction Set . I've designed them using an existing set as a reference. I may be missing a few parts that weren't in my set. Parts included: Rods in 5 sizes. The filename has a…
This is a happy posable crab I made using tinkercad. He is compatible with other tinkercad models using the same joints. You will need to print the following. 1 main body 3 sets of feet 4 sets of “biceps” 1 set of claws or blunt claws I…
My first design is simple tram.
Multi-material remix. Wings can be printed in place or separately (it will be a very tight fit, some sanding probably required).
Hi! I hope you like my designs. If you have any special design or vector you want to turn into a 3d printable model you can ask me, I can design it for you! Hola! Espero te gusten mis diseños. Si tienes algún diseño de vector en especial…
Smooth Circle cylinder for tinkercad and bambu slicer. Was having issues with exported stl circles and cylinders from Tinkercad. So I imported the freecad cylinder stl into tinkercad and designed my object with it. On new stl export from…
I made the stand in Fusion 360 and added the name in tinkercad. The name is customizable in tinkercad (instructions in tinkercad description) tinkercad model: https://www.tinkercad.com/things/4zsvqNUx7e2 If you want to support me, please…
This all started while waiting on a p1p enclosure that I was happy with.. but I couldn't wait to start making stuff. so I started making my own. I set out to make an enclosure that didn't restrict the build plate view at all levels. most…
Tinkerbell Silo Earring Not all filaments are made the same. I use Bambu and or matte filaments mostly because I can print thinner layers and achieve the best color results. Layered. No AMS/MMU/Ace/CFS/Chroma needed. Just color swap at…
While looking for an option to allow my daughter to play with both her Lego Duplos and Tinkertoys, I found no solution that I liked. I decided to design something myself. It is a simple 2x2 Lego Duplo "style" brick but with two distinct…
Fairy shaped cutter. Print instructions Category: Kitchen & Dining
i found in tinkercad shapes and thought that it was cool PLEASE COMMENT AND TELL ME IF IT IS COOL
I needed a small case to play with new RP2040 designs. This housing allows access to the optional JST XH connectors and protects the interfaces from accidental contact. A double case allows debugging with a 2nd pico. Print with PETG in…
You are doing me a big favor by clicking the Like button :-) Tinkerbell ornament to place in the window. It is translucent. Print all parts with 0.25 nozzle 0.10 layer height
I made this keychain in tinkercad and you can change the name in tinkercad (instructions in tinkercad description) Link to tinkercad design: https://www.tinkercad.com/things/2M9QvSsYARD If you want to support me, please download the…
Are you tired of being bored? Are you looking for a way to pass the time and have some fun? Look no further – TinkerBlocks are here to save the day! This little gadget is packed with endless entertainment! Its compact design makes it…
Taller remix of Zuspiel's Lack enclosure feet to fit my slightly larger printer inside. The design allows the top table to simply be lifted off for access to the printer. In all I spent around $30 for the whole thing - $24 for 2xLACK…
Simplified on blender
A silly remix of the lowest poly thinker. The “thinker” is unchanged and becomes the “stinker” with the addition of the toiler paper holder. A tribute to the undeniable fact that some of the world's greatest thoughts and ideas occur…
replace boring light switch cover with this
This is a simple guide to make your own 3x3 sliding puzzle - whether it is a map or not - using Tinkercad, thanks to the model @Nikolaos Babetas uploaded of the puzzle itself without any image on top of it. The aim of this remix is to…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/eGDjOnEIHqO Category: Animals
Remake of Tractor design found in tinkercad Category: Toys & Games
A 3D printable gnome tinkerer carrying a clockwork backpack that transforms into a base. The gears and pipes should be stylized but chunky, avoiding fragile thin details. The whole model should be in one piece, with an unusual…
These are shapes that are directly from TinkerCAD. The intention is to cut out the side of a box and have a DIY version of those toys that kids use to put shapes into the appropriate holes or just blocks to help with dexterity. The widest…
Description The Tinker Twist is a hands-on, educational toy that sparks creativity and fine motor skills! This container features threaded holes on all sides, allowing kids to twist in colorful screws of different shapes. Perfect for STEM…
i made this for tinkerers like me. please comment, and ask for recommendations!
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
Tinkerbell Earrings I print all my earrings and keychains with a .2 Nozzle. If you are using a .4 nozzle, please do not complain if there is issues. My earrings are designed and test printed with a .2 nozzle. A .4 can not achieve the same…
Wall decoration on the Tinkerbell the best is to print front side towards the plate for a better rendering 1M X 1.4M at 100%
connect to bottom of fauccet
This is the model resulting from completing the "Die From Scratch" lesson on Tinkercad by Autodesk.
Star earring designed in Tinkercad Category: Fashion
Hello! The original design was drawn by Dutchmogul. I redesigned his base. I really like the design, so I wanted to share it with you. I hope you like the model.
Toy Tanker Truck designed in Tinkercad Category: Models
Printing Settings: Print at above 15% infill Supports are not required
I wanted to make something that I could sit there and tinker with, thus my tinker knife (made with tinkercad)
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 Design Concept The artwork features a stylized version of Tinkerbell sitting on a park bench, capturing a moment of serene rest. The design plays with elements of…
Goblin Tinkerer - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 This cunning Goblin Tinkerer is ready to wreak havoc on your tabletop, equipped with a massive, jury-rigged backpack and a volatile hand-cannon. It’s the perfect blend of…
inTinker's stringing calibration. 4-level.
i made this to be easier to print. the tinkerbells and the plate are printed separately. the tinkerbells can be left to be removable or can be glued into place. no supports needed. Category: Decor
This is Tinkerbell. I uploaded this to thingiverse.com. It was originally uploaded by Rayneman with the wings and tinkerbell separately. I used MeshMixer to clean up Tinkerbell's back. I then added the wings so that it can be printed…
Swap Instructions: Start with Black At layer #3 (0.7mm) swap to Sand At layer #5 (1.1mm) swap to Cool White At layer #7 (1.5mm) swap to True Green for the rest. Settings used: Layer height 0.2mm First layer .3mm All Patterns det to…
-6 hour print at 100mm/s with tree support - big enough for most people
The planet gears can be put in any orientation as long as two are facing eachtoher and the sun gear is in the middle . The whole thing was designed in Freecad using Part workbench and Gear workbench . Made for STEM enjoyers and Tinkerers…
https://www.tinkercad.com/users/6ZyoPpYZi88
Simple earring designed in Tinkercad Category: Fashion
