Search results: tracer

Sort order

153 models

P
PrintablesGodlikeOne

Mock Suppressor For Airsoft - 14MM Counter-Clockwise (CCW) Threads - Fits xCortech Tracer

I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…

Downloads
1,092
Likes
98
Rating
3.67
P
PrintablesDokrull

Acetech / Xortech Airsoft Tracer Housing

This is a replica of a real steel suppressor, that could house the Acetech or Xortech Mini Airsoft-Tracerunit. There is a long an short version with a crown or flat end. Keep in mind, the crown version is better to be printed on a resin…

Downloads
990
Likes
114
Rating
5
P
PrintablesKampflafer

Airsoft Tracer Housing

I did not like the look of commercial available Tracers so i designed my own. Housing for the Begadi Tracer Unit (00821110SET). 14 mm CCW Thread. For the best fit and look print with Resin, FDM works as well. If you need other mounting…

Downloads
815
Likes
154
Rating
4
P
PrintablesBoyairek

AAP01 Frontend Hammerhead with tracer unit

Remixed model of Hammerhead for AAP01 to fit tracer Unit Changes: - Slightly bigger - Space for tracer unit (Acetech Brighter C or any below 28mm diameter) - 14 CCW inside for tracer - Removed bottom rail (added version with this rail) -…

Downloads
685
Likes
101
Rating
5
P
Printablesmaramao

TBS Tracer Crossfire MPM Micro to Nano - JR bay module adapter

Made a quick remix of the already discontinued betafpv Micro-Nano module adapter (they probably realized they can make more money making a ELRS Micro module) to be used with TBS nano style transmitter modules and hopefully other nano…

Downloads
557
Likes
13
Rating
5
P
PrintablesJeevan

Tracer 9 GT Chain Slack Jig

This jig will help you with adjusting chain slack, normally you would need to adjust and check the slack, but with this jig, you just place it on the chain guide and adjust the slack until it touches the jig. Factory spec is between 45mm…

Downloads
476
Likes
20
Rating
4.5
P
PrintablesMNA24

RC Car Wall Mount Compatible with FTX Tracer (Also HBX 16889)

Simple wall mount to hang a FTX Tracer RC Car on the wall. Printed in PLA at a 0.28 layer height with 20% gyroid infill Should be compatible with the HBX 16889 RC Car as it is very similar. Potential for compatibility with other 1/16th RC…

Downloads
399
Likes
45
Rating
4.67
P
PrintablesSamarth Jain

Tracer Pulse Pistol Gun | Overwatch

Model of Tracer's weapon Pulse Pistol from the popular esports game Overwatch. I have divided the model into 4 parts for easy printing - Handle left and right, and muzzle left and right. Do print, share the makes and have fun!

Downloads
347
Likes
103
Rating
0
P
PrintablesWesley Rogers

Airsoft Tracer Housing/Mock Suppressor

The original creator for this created a wonderful design for a tracer housing or just a great mock suppressor. However, only long and short versions were available. This is a medium sized version of those in which is about an inch shorter…

Downloads
339
Likes
44
Rating
5
P
PrintablesJcsrf

Tracer 7/700 Central Handle Bar

This part allows for a temporary/permanent replacement for the central handle bar on your Yamaha Tracer 7/700 (new model 2020). I have kept mine for about 300 kilometers, driving in all type of conditions and terrains without an issue.…

Downloads
333
Likes
7
Rating
0
P
PrintablesAaronF.

Tracer 9 & GT Side Case Wall Mount

Inspired by the original part, my design with some little extra feature. You can lock and secure your Sidecase on the Wall. The Part needs minimal Support. Printed in Pla, Bambu Settings 0,2 Strong / 6 Walls with some Supports in the…

Downloads
333
Likes
19
Rating
0
P
PrintablesZodiase

Long Mock Suppressor (requires tracer unit with threads)

Update 20240229: Added step file in case any one wants to do a bit of DIY. -------- I've been looking for a mock suppressor that: 1. Looks long but doesn't add too much to the overall length of the gun. 2. Slim but also fits a tracer…

Downloads
330
Likes
31
Rating
5
P
Printables75echo

Tracer Pellet Painting rack .177 (4.5mm)

Designed to be printed in PLA. 20% infill , 0.2 layer height. Print upside down. for best results , first prime the base then paint with flourecent orange paint. Optimised for JSB pellets but will work for a lot other brands.

Downloads
236
Likes
49
Rating
5
P
PrintablesPeter Farell

Gothic Tracery Pendent.

Gothic Tracery Pendent. I designed a LoRa for Gothic Tracery and tested out its output with displacement. You can find the LoRa for stable diffusion here. Gothic Tracery - v1.0 | Stable Diffusion LoRA | Civitai

Downloads
231
Likes
85
Rating
0
P
Printablesfasa38

Wall suitcase support for Yamaha Tracer 9/9 GT

I reccomend to use PETG filament, 0.2 layer. For no supports rotate it.

Downloads
225
Likes
7
Rating
0
P
PrintablesMigueppc

Contour Tracer / Scribing Tool

Accessory for copying shapes, contours, and outlines with precision. This tool features a sturdy fixation base with pointed and rounded ends on opposite sides, allowing for versatile usage on various surfaces and objects. M6 screw with…

Downloads
199
Likes
30
Rating
0
P
PrintablesTacticalBeanie

TM KSG - T238 shotgun tracer adaptor

Adaptor for the Tokyo Marui KSG airsoft gas shotgun to allow mounting of a T238 Shotgun tracer unit. Note: I recommend printing on its side with supports to help take the weight off the layor line direction and printing in PETG/ABS, Im…

Downloads
180
Likes
14
Rating
0
P
PrintablesMaverick0197

ASG CZ Scorpion AEG - Tracer Cover

Update 09/02/2020: Added a Version 2 that shrinks the gap between the cover and the front of the gun. Distance from front of tracer to rear of cover: V1=110mm V2=122mm Tracer Cover designed for the new ASG CZ Scorpion AEG when using the…

Downloads
178
Likes
34
Rating
0
P
Printablestuna-fish

Exposure TraceR Saddle Mount

Designed to clip on rail from below first, then other side from top so they counter act and less likely to pop off; a sort of clip twist. Light can be clipped in before or after mounting to saddle. Should clamp opening should point…

Downloads
163
Likes
6
Rating
0
P
PrintablesDenjo

XC Tracer Maxx I/II Flip Case

XC Tracer Maxx I/II flip case to mount your XC Tracer screen up or screen down, so you can leave your device on the cockpit without scratching it. Features: USB port and button accessible in flight position button covered in transport…

Downloads
162
Likes
8
Rating
5
P
PrintablesUPWDesign

RECLAIMER: Dual Stage, Tracer, Stock, and Some Other Mods for Project Mjolnir

EDIT 20231015 : Added Modular BCAR files and files for Momentum motors (Protostar). Recommend 30A 4-in-1 ESC or greater. The design accommodates mounting for 20mm square ESCs, but larger ESCs should fit in the housing. (Be sure to…

Downloads
148
Likes
38
Rating
0
P
Printablesmsaeger

Remix of T-Rex by elliotracer

This is the T-Rex by elliotracer for people with small build areas like me. All the pieces separate and the tail and spine are both cut in two pieces. Thanks for the thing elliotracer. Category: Animals

Downloads
129
Likes
31
Rating
4.67
P
PrintablesAlex St. Amour

M14x1- Threaded Tracer plug

This design remixes another design of a plug to trigger the tracer unit to turn itself off. The original design by Byrano doesn't have anything to secure the plug inside of the tracer unit, so I added a thread to screw the plug into the…

Downloads
126
Likes
9
Rating
0
P
PrintablesLiova

AT1000 airsoft tracer cap

Print flat side down. Was designed for 0.45 mm line width. Adjust size +- 0.5% if necessarily.

Downloads
123
Likes
7
Rating
0
P
PrintablesNikoFly

Angled pipe tracer - traceur angulaire de coudes

I've designed this handy tool for our pipefitting friends, to trace bent pipes at the required angle. Eligible bent pipe diameters range from Ø25mm to Ø88.9mm. I've included a ruler to enable you to trace all these diameters. Assembly is…

Downloads
121
Likes
60
Rating
0
P
Printablescsants

LLAVERO PARA YAMAHA TRACER

Llavero Yamaha tracer. Fabricado para dos colores con Pla

Downloads
118
Likes
8
Rating
0
P
PrintablesMaverick0197

Elite Force HK MP7 A1 AEG - Tracer Muzzle Break

Muzzle break designed for the new (2019) H&K MP7 AEG. This version is designed to work with the ACETECH Lighter S tracer unit. I have included the barrel adapter I made to mount the tracer as well as the cover I printed for the tracer.…

Downloads
115
Likes
16
Rating
0
P
Printableszaufen

tracer unit suppressor barrel (acetech brighter C)

battery suppressor outer barrel with room for acetech brighter c tracer unit

Downloads
111
Likes
12
Rating
0
P
PrintablesF3NR1R

Tracer gun (base skin)

base skin tracer weapons, is in low poly to try to make filing and printing faster

Downloads
105
Likes
14
Rating
0
P
PrintablesBoda

High voltage 1000V Isolation Tester 1kV Curve Tracer STM32

High voltage curve tracer , isolation tester Some time ago I ordered 230VAC LED modules, consisting of an aluminium coolplate and electronics, separated only by a thin layer of isolation. I wanted to check the safety of the isolation, and…

Downloads
96
Likes
7
Rating
4
P
PrintablesTacticalBeanie
18+

The source marked this model as adult content.

Downloads
95
Likes
12
Rating
1
P
PrintablesWalter Tansini

Yamaha Tracer 9 (GT+) 2025 spacer for SW Motech pro tank ring

For some reason every motorcycle manufacturer has different fuel tank covers, even changing them per model year, or - in this case - put plastics around the tank ring so that a special item needs to be bought. I have standardised on SW…

Downloads
92
Likes
5
Rating
0
P
PrintablesTinUK

Xcortech 12mm CCW Tracer Adaptor (Raven Hi-Capa 5.1)

My first upload. This may prove useful to other people :) Adaptor to fit a Xcortech XT301 tracer unit onto a Raven Hi-Capa 5.1 GBB airsoft pistol. Other pistols with a 12mm CCW female thread may also fit. The screws, LED and push button…

Downloads
92
Likes
15
Rating
0
P
PrintablesAaronF.

Tracer 9 GT Led Blinker Abdeckung hinten/vorne

Abdeckungen für Tracer 9 /9GT MT07 neuerer Baujahre die Blinker verbaut haben deren Bild angefügt ist. Ich habe bei meiner Tracer 9GT Lauflichtblinker montiert. Die Löcher der Abdeckungen sind für Blinker der Größe M8 vorgesehen. Ihr…

Downloads
91
Likes
3
Rating
0
P
PrintablesRico_LRS

XCTracer MAXX II Clip

Version 2.4: -Deeper groove for velcro to add the possibility of cover the original velcro(hook) with a piece of velcro(loop) to prevent harness rubbing when stored -Added Grip on removing tab for an easier remove. This support is made…

Downloads
91
Likes
5
Rating
0

EleLab_v2 Signal Tracer

EleLab_v2 Audio amplifier / Signal tracer For general information and building instructions about this project please see the Github repo ! Also check out the collection of the whole EleLab system here ! The EleLab system is a low cost,…

Downloads
91
Likes
21
Rating
0

Osprey Suppressor Style Tracer Unit

I made a tracer unit in the style of the Osprey suppressor which uses a small 7,4V LiPo battery and a couple of high brightness 5mm UV LED's to light up the tracer BB's as you are shooting them. The suppressor consists of 3 main parts,…

Downloads
90
Likes
21
Rating
0
P
PrintablesPeter Farell

Tracers Gun : Overwatch

Tracers Gun : Overwatch. Weathered Version. Dents and things. split versions available

Downloads
88
Likes
17
Rating
0
P
Printablesjonasgddfr

(Remix) Tracer 9 GT Chain Slack Jig

I really loved the original idea, so simple and effective. But I noticed the OG measures from the chainguard down to the top of the chain. Yamaha manual instructs you to measure 45-50mm to the middle of the chain while pushing down on it.…

Downloads
83
Likes
9
Rating
0
P
PrintablesFunbie Studios

Tracer's Tracemaker from Overwatch

This is a model based on Tracer's Tracemaker from the massively popular Overwatch game. It has been scaled to fit most hands. Pieces have been separated down to fit most 3d printers and can be assembled be referring to the instructions…

Downloads
79
Likes
54
Rating
5
P
PrintablesMurrey

Beeline Mount for Yamaha Tracer 7/700 Handlebar

Accessories provided by Beeline with its GPS does not adapt to my motorcycle which is Yamaha Tracer 700 (or Tracer 7). I tried for 1 year with a short shelf bracket however holder has been cracked. Therefore I designed a part who links…

Downloads
76
Likes
8
Rating
0
P
Printablesxythobuz

OpenChrono Airsoft Chronograph and Tracer

Attaches to the front of an airsoft gun like a silencer. You can find a complete write-up and build guide on my website . All source code and design file are in this git repository .

Downloads
73
Likes
47
Rating
0
P
PrintablesThor

ASG Airsoft Scorpion Evo Custom Mock-Suppressor with Space for a Tracer

Custom Mock-Suppressor for the ASG Airsoft Scorpion Evo Has space for a tracer, with different length shells for different Acetech tracers with a max Diameter of 31.8mm It will not fit a regular Evo Handguard and needs a clearance of 37mm…

Downloads
70
Likes
12
Rating
0
P
PrintablesIvaylo Mitev

XC Tracer Maxx I/II Flip Case - Remix by Ivko

Please read the description in the original. This remix is built lightweight without sacrificing functionality. Remix from: https://www.printables.com/model/526330-xc-tracer-maxx-iii-flip-case

Downloads
69
Likes
7
Rating
5
P

Navi Halterung Yamaha Tracer MT09 900 Smartphone

Navi Smartphonehalterung Yamaha Tracer MT09 MJ 2017 Infill 25% beide Halter, Rolle 100% Rolle kleben

Downloads
66
Likes
3
Rating
0
P
Printablesrichard

Yamaha Tracer tank ring raiser fits on motech

i had troble whit fitting en this was my solution raiser +13mm

Downloads
65
Likes
4
Rating
0
P
PrintablesLokiRulez

OW2 Tracer - Union Jack (Summer Games)

I present the lovely Miss Tracer in her wonderful Union Jack Summer Games skin! Enjoy NOTES: I have not printed this one yet as I am waiting on a new FEP sheet for my printer. I will print as soon as that comes in. I will be making a base…

Downloads
61
Likes
12
Rating
0
P
PrintablesThor

Acetech Lighter R Tracer Cap

A replacement front cap for the Acetech Lighter R. Only difference between versions is the thread width. V1 is least wide, while V3 is widest. This means that V1 will have a loose fit on the tracer, while V3 will have a tight fit,…

Downloads
60
Likes
4
Rating
0
P
PrintablesHomerlars

JetRacer Felge Rim Waveshare

Passende Ersatzfelge für das JetRacer Kit von Waveshare. Für das nicht Pro Modell. Suitable replacement rim for the JetRacer kit from Waveshare. For the non Pro model.

Downloads
59
Likes
4
Rating
0
P
PrintablesCaretaker

Tracer Deep Hole Pencil, Pen and Leads Wall Mount

Small print for holding the deep hole pencil by Tracer. Prints in PLA or resin. Orientate upsidedown for PLA with no supports. Update 06/05/25 - 3x Holder Added Update 14/05/25 - Marker Pen holder added and Leads Case holder added.

Downloads
55
Likes
4
Rating
0
P
PrintablesA.S. Design

Tracer/compass ruler

This is a typical woodworking tool. Any hole is 1mm farther from 0 than the one on the left. So first row is 0-5-10-15-20… mm the second is 0-6-11-16-21… the third is 7-12-17-22 and so on It can be used as a compass pointing a nail in yhe…

Downloads
55
Likes
23
Rating
0
P
Printablesgiveen

Coldheart Tracer Rifle

Famous Coldheart, because my D2 clan made me do it.

Downloads
54
Likes
14
Rating
0
P
PrintablesJames Wood

ImpulseRC Apex Tracer Antenna Mount

A vertical mount for the Tracer antenna on an ImpulseRC Apex drone. Needs one small cable tie/zip tie.

Downloads
52
Likes
1
Rating
0
P
PrintablesDonpilkerton

ImpulseRC Apex(standard) Vista antenna and TBS tracer mount

This is a mount I made for the apex. It holds a vista antenna, rush cherry, or foxeer lollipop and a tbs tracer antenna.

Downloads
51
Likes
3
Rating
0
P
PrintablesTyler44

Math Symbols Tracer Tool

This model can is very easy to scale. I would only scale the X and Y axis otherwise it gets pretty thin. Lowest I would scale to is 65%. At 100%, the symbols are the height of about 2 rows in a standard notebook.

Downloads
51
Likes
12
Rating
0
P
PrintablesEvasive_Brain

Battlefield - Tracer Dart Gun

This is a model of the tracer dart gun from the battlefield series of games, in my opinion is one of the most fun a unique gadgets in the series and it has end up looking great, this model its A1 mini compatible it doesn't require AMS but…

Downloads
50
Likes
15
Rating
0

HSW deep hole tracer mechanical pencil holder (1 to 3 holes)

This holder allows you to store up to 3 deep hole tracer mechanical pencils on the honeycomb storage wall by RostaP. I've modelled it for the cheap Aliexpress ones (see picture) but any tracer with a diameter of 14 mm should fit fine.…

Downloads
50
Likes
10
Rating
5
P
PrintablesLokiRulez

Tracer - OW2 Bust

Here is a bust of Tracer from Overwatch 2. This is her default skin. I plan on making some more of her other skins, just will take some time CHANGE LOG: 2-27-2024: Initial Upload

Downloads
49
Likes
10
Rating
0
P
PrintablesAscardia

Airsoft Tracer Energy Saver (Acetech and similiar)

To put an Acetech Tracer with "Shake and Wake" into deep sleep mode, you have to put something in it, wait for five beep sequences and then carefully lay somewhere. What happens if you bump into the tracer or move your gear bag or…

Downloads
48
Likes
7
Rating
0
P
Printablestyler

Vespa Moped Gasket Tracers

Tracing paper gaskets can be a pain when trying to make your own gaskets. I took photos of existing gaskets and then scaled them properly to make these tracers. One for case gasket and one for gearbox gasket. Category: Parts

Downloads
45
Likes
7
Rating
0

Tokyo Mauri 5-7 tracer silencer

This is a rail attachment for TM 5-7, it adds the ability to house a G&G UVT106 tracer unit and looks like Sam Fisher's 5-7 silencer. The two halves are secured with four 1/16 screws that are about 3/4 in long. The design attaches to the…

Downloads
45
Likes
7
Rating
0
P
PrintablesWaffle

tracer suppressor mod

add a tracer to the original mosquito suppressor, max inner barrel length is 200mm

Downloads
42
Likes
11
Rating
0
P
PrintablesPeter Kovaľ

Yamaha tracer

quite a successful Yamaha tracer model.

Downloads
40
Likes
2
Rating
0
P
Printablestelepath

Contour Tracer

This 5x5 cm square ruler is meant to duplicate countours in closed spaces with various offsets! You can use it with a pen/pencil/cutter The model is with or without a grip. The circular openings have diameter: 2mm The straight openings…

Downloads
40
Likes
12
Rating
0
P
PrintablesDMTMKGWM

Flooring Tracer for Walls (Print-In-Place)

Scenario: When laying down your tiles/flooring and realising that it is not perfectly aligned with your wall, you can simply use this tool to mark your cutting line. Being a print-in-place and available in various diameters, selecting one…

Downloads
40
Likes
9
Rating
0
P
PrintablesB4by_dR1v3R

NUPROL OR GENERIC AIRSOFT TRACER UNIT 3D DUMMY MODEL

3D model of a generic "Made in China" Nuprol rebranded muzzle flash tracer unit to use as a reference model in other projects, exact measurements were taken but let me know if anything doesn't fit! Threads may be tight but it is mostly to…

Downloads
40
Likes
5
Rating
0
P
Printablesdkjnk2009

2019 Yamaha Tracer 900 GT GoPro Mount

This is a gopro mount that connects to the hand guard of a 2019 Yamaha Tracer 900 GT. It probably fits other Yamaha models as well, but I don't know that for sure. It uses standard GoPro screws/nuts for attachment. I glued in an M5 nut…

Downloads
38
Likes
2
Rating
0
P
PrintablesCristian Coco

Yamaha MT 09 GoPro mirror mount (Right) Tracer too

Just a mirrored version of https://www.thingiverse.com/thing:2338589 Category: Automotive

Downloads
38
Likes
7
Rating
0
P
PrintablesPirci

Walksnail Tracer + Foxeer Antenna v2.stl

Antennamount ImpulseRC Apex Frame for Walksnail Tracer + Foxeer Antenna v2

Downloads
37
Likes
4
Rating
0
P
PrintablesBrendan Johnson

35mm tracer housing supressor

Print as fine as you can for best results on the threads, I printed at 0.08mm thickness with 0.4mm nozzle and threads came out perfect on bambu labs a1

Downloads
36
Likes
4
Rating
5
P
PrintablesKlaas Vaak

Telequipment CT71 Curve Tracer knob

This is a prototype 3D printed knob since i don't have the original and have no idea how the original looks, but it's working for me. The aluminium insert is heated and pressed in for a tight fit.

Downloads
34
Likes
0
Rating
0
P
PrintablesOurAngryBadger

Baseball Line Tracer Tool

This tool will allow you to trace baseball lines onto a ball or ball-shaped object. This is made to fit an 80mm diameter ball. Scale up or down in your slicing program depending on the size of your ball.…

Downloads
34
Likes
9
Rating
0
P
PrintablesPirci

Apex Frame Walksnail Foxeer Antenna + Tracer Antenna

Antennamount for ImpulseRC Apex Frame. Foxeer Antenna + Tracer Antenna

Downloads
33
Likes
3
Rating
0
P
PrintablesPirci

Apex Frame Walksnail TrueRC Antenna + Tracer Antenna

Antennamount for ImpulseRC Apex Frame. TrueRC Antenna + Tracer Antenna

Downloads
33
Likes
1
Rating
0
P
Printablesmac310

Tracer Web Camera Lens Cover (parametrized)

I did it for my Tracer HD WEB008 but parameters allows to adjust dimensions according to your needs.

Downloads
32
Likes
3
Rating
0
P
PrintablesMonsieur-Pierre

Tracer – Overwatch Inspired Hero Figurine

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A dynamic and energetic figurine inspired by Tracer from…

Downloads
31
Likes
7
Rating
0
P
PrintablesMücke

KWA - M11A1 - Airsoft Tracer Carrier - Free Download

A tracer carrier for your KWA M11A1.A tracer carrier for your KWA M11A1. Uses Standard AceTech Tracer Unit. Only place supports like this:

Downloads
30
Likes
6
Rating
0
P
PrintablesPawel H.

Yamaha Tracer 7/7GT Bar Mount Adapter (2022–2024)

This is a custom bar mount adapter designed specifically for the Yamaha Tracer 7 and 7GT (2022–2024 models with the black plastic bar and color TFT display). It allows you to mount standard 31.8 mm (1¼”) handlebar accessories—such as…

Downloads
29
Likes
2
Rating
0
P

Tracery

Tracery

Downloads
28
Likes
4
Rating
0
P
PrintablesTobu

XC Tracer Maxx II cover

Protection kit for XC Tracer Maxx II. (Paragliding variometer) USB-C & cord feed-through exempted With prusa slicer you can easily add your name in the top. (Individualisation)

Downloads
27
Likes
2
Rating
5
P
PrintablesSpater

Airsoft Tracer unit simple storage box

I designed a simple box to store my airsoft Acetech Lighter tracer unit, thread adaptor and charging cable. Lid holds on just by tight fit. (not meant to carry around)

Downloads
27
Likes
4
Rating
0
P
PrintablesGavin London

Tracer for common shapes

Easy for all art madericals to make clean and precise shapes. I chose the most common shapes that people draw.

Downloads
26
Likes
6
Rating
0
P
PrintablesJerome

Apex backpack for TBS Tracer + SMA Antenna

Backpack for ImpulseRC Apex frame. Designed for TBS Tracer and TBS SMA connector. Remix from : https://www.thingiverse.com/thing:4767603 Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 200 Infill:…

Downloads
25
Likes
0
Rating
0
P
PrintablesFarnsworth

Yamaha Tracer 9 ignition key hole cover

Ignition key hole cover for a Yamaha Tracer 9 May fit other models too. Printed in TPU.

Downloads
24
Likes
2
Rating
0
P
PrintablesTommaso_Rob

Boccole Cupolino Yamaha Tracer 900 2015-2017

Ho realizzato le boccole di ricambio per la struttura del cupolino della Yamaha Tracer 900 2015/2017. Per chi utilizza smartphone o navigatore nella parte alta della strumentazione, a lungo andare le boccole si consumano con movimenti…

Downloads
24
Likes
1
Rating
0
P
PrintablesAjax

Tracer Unit Shim for Acetech drop in unit with Novritsch Quick Change Suppressor

This shim makes the tracer unit align with the holes in the suppressor. I have it in the long suppressor but i think it will fit in the short version too. The shim stops horizontal movement where the sound baffles stop vertical movement.…

Downloads
23
Likes
2
Rating
0
P
PrintablesJosé Pedro

Tracer Figurine Gaming Character 3D Printable

Bring the lightning-fast hero to life with this stunning 3D printable STL model that captures every detail of the beloved time-jumping agent. This meticulously crafted figurine showcases the iconic pose and distinctive outfit, making it…

Downloads
22
Likes
5
Rating
0
P
PrintablesNeoPrint3D

To-Do List Tracer

This printable sticky note tracer is designed to help you create organized and visually appealing to-do lists. Use the lines to write down your tasks and the circles to mark off completed items. The simple design allows for easy…

Downloads
22
Likes
6
Rating
0
P
PrintablesSenior.Euhenio

Yamaha Tracer 7/7GT/700 navigation bar

I needed good mount place for a navigation for my Yamaha Tracer 7GT 2022. Looking onto what place there is and what I need, I decided to create mountable adapters allowing to install standard 12mm bar so some kind of navigation or other…

Downloads
21
Likes
1
Rating
0
P
PrintablesEinfachUli

Throttle lever Replacement for ICONBIT IK-1972K TRACER

Made for a ICONBIT IK-1972K TRACER E-Scooter. Throttle lever replacement slides just on the Ring. To fix it use some Plasic Glue. It is bigger for better handling. Printed it with ASA and 40% infill.

Downloads
21
Likes
2
Rating
0
P
PrintablesThor

Jaeger Precision STFU Mock Suppressor Tracer Adapter

Acetech Brighter R Tracer Adapter for the Jaeger Precision STFU Mock Suppressor Designed for a 11mm right hand to 14mm adapter that the tracer screws onto

Downloads
19
Likes
2
Rating
0
P
PrintablesBratek

Keyboard Foot Replacement - Take Me Knock (by Tracer)

The model is a simple keyboard foot replacement. It is an easy to print solution to repair broken keyboard stand. Created for the Take Me (brand by Tracer ) Knock USB keyboard, but could fit some other keyboards. It is relatively fast and…

Downloads
19
Likes
4
Rating
0

BT4 Rental Paintball tracer ball detent

So, I got a BT4 rental paintball tracer which had been store for 20 plus years, all the orings where gone and the ball detent literally desintegrated in my hand. I cleaned it up, changed the orings, oiled it up and it was working great,…

Downloads
19
Likes
1
Rating
0
P
PrintablesSerge Nader

Analemma tracer (multiple orientations)

It's simple, it just takes time! This design resembles a vertical sun dial that can face East, West or South. Use it as a fixed tool to trace the movement of the sun. Grab a paper (or equivalent) and trace the shadow cast by the indicator…

Downloads
18
Likes
3
Rating
0
P
PrintablesJ. Kaiser

XC Tracer Mini V - Schutzdeckel

Wie bereits für das Skytraxx 4.0 und 5.0 hatte ich für einen Freund den Deckel für das XC-Tracer mini 2 entwickelt - nun kam ein anderer Sportsfreund und wollte den Deckel auf das Tracer Mini V angepasst bekommen. Ich warte noch auf…

Downloads
18
Likes
1
Rating
0
P
PrintablesJacob Moksnes

Tracer gun stand

I designed this simple stand for tracers guns from overwatch.

Downloads
18
Likes
8
Rating
0
P
PrintablesSimon Drewery

Tracer pencil belt clip

a belt clip to hold my tracer pencil and two driver bits

Downloads
17
Likes
2
Rating
0
P
PrintablesAndrew Nelson

Airsoft Spitfire Tracer Spanner Wrench

Spanner wrench for tightening or loosening a Spitfire Tracer to a barrel. 19.2mm gap. No supports necessary. Print with good amount of infill for strength. Created with Fusion 360, so can be modified if needed, let me know.

Downloads
17
Likes
0
Rating
0
P
PrintablesBoris.DE

XC Tracer Maxx II Case TPU

XC Tracer Maxx II Case TPU + PETG

Downloads
16
Likes
0
Rating
0
P
PrintablesYeen621

iconBIT TRACER License Plate Holder

A replacement License Plate holder for the Iconbit Tracer scooter sold in Germany. Since Germany requires you to have a license Plate, reflectors and rear light on an electric kick scooter many scooters just have a really badly built…

Downloads
16
Likes
1
Rating
0