485 models
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
🌲 English below, Deutsch weiter unten 🌲 The same slightly asymmetric trees as my vase mode set, now with little round holes. Printed with 3 walls, the light shines mostly through the dots, like tiny lights in the snow. ✨ Trees: small 6 ×…
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant
Made replacement stands for small IKEA christmas trees (304.668.13). Originals look like bath plugs: https://www.ikea.com/se/sv/p/vinter-2020-dekoration-set-om-3-julgran-groen-30466813/
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A previous model enlarged so I can test trees and using different filaments. Petg clear supports and pla model. If you want normal model go to DaHouzCats page
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This is a collection of simple to print 3D Christmas ornaments , including snowflakes, stars, bells, trees and many more. The set contains over 15 original designs created by me in Blender to ensure clean proportions, sharp details and…
Owl on Treestump, Hexa Sculpture
Check out other Christmas models:
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
This model is print-in-place so no assembly is required! A tolerance of 0.3mm is required so make sure your printer is capable before printing. I recommend a slower first layer of about 15mm/s to ensure everything sticks well. This can…
Very easy to print. Insert the printed trees into the holes. No glue needed. Merry Christmas 🙂 Layer Height: 0.2 Infill: 10% - 20% Supports: No Filament: White PLA or PETG https://makerworld.com/en/models/662696
Old tree and logs suitable for H0 (1:87) railway. Easily printable on SLA printers. See our article about model railways to learn more: CZE: https://josefprusa.cz/3d-tistene-masinky-velikosti-h0-187/ ENG:…
Owls on Treestump, Hexa Statue
Spiral Vase Mode - No Supports. Simple shapes combine with the equation of nature to create fun trees. Loosely based on learnings from this model
So, after many iterations and some bad behavior from my printers, I'm finally releasing this mod, or should i say costume? Basically, this is a custom front plate for my direct drive mod. As a Voron owner and a big fan of Voron printers…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) Abstract Christmas Trees –…
Christmas Trees A christmas tree consists of 2 parts each, which are simply plugged together. Included are three different sizes of christmas trees with a height of about 160, 120 and 80 mm. --- Weihnachtsbäume Ein Weihnachtsbaum besteht…
Simple decorative trees in three different sizes (130, 110 and 90mm +10mm base ring) for lighting with LED tea lights, not just for Christmas. Arrangements with two or three trees of different heights, as shown in the photo, look…
Whenever you want to have your Twotrees laser engraver higher...
-PT-BR Esse mod tem como objetivo trazer o Afterburner para a Bluer. O Afterburner "stock" é ideal para ABS porém deixa a desejar com PLA. Como a Bluer é muito usada para imprimir PLA, uma opção melhor seria utilizar um MOD chamado AB-BN…
12.02.2023. sapphire new version v3 finally go time to print all parts, not just virtually check in fusion 360. Now one of last version 3 is out and belts finally are parallel. p.s. Some printers can be different sizes, gen1, gen3, and…
Cutting eight Xmas Trees cookies at a time will make your cookie production more efficient. The amount of leftover dough that needs to be reused between batches will be less. And finally, the dough will be kept at the ideal temperature…
Easy to Print You may need to add a brim if you have bed adhesion issues 200mm size and a 400mm size in 3 parts
Made these trees for my girlfriend. They're cool centerpieces and are a hit with guests! Made with ERYONE Matte PLA Black Forest Green 0.4mm nozzle with 0.2mm layers. Can be printed with 2-3 perimeters and 0% infill. No supports. Seams…
Quick, easy, Christmas trees Print in vase-mode (spiralize) Can be scaled up or down
This mount keeps the nozzle in the same place as the stock nozzle, so no loss of print volume on any axis. Uses original mounting system, no extra hardware required. Base model with optional: Dual 5015 ducts Single 5015 duct (remix of…
Custom Dust Shoe for 500W 52mm Spindle Benefits: Provides excellent air stream and dust control. Simple and cost-effective to make. Easy to attach and detach thanks to the magnets. Still posible to change bits Materials Needed: 1x M4 x…
The original design has a large flat bottom, which for some reason would always sag downwards for me, sometimes colliding into prints. This remix minimizes that bottom surface such that the sag points are eliminated. The bottom is also…
The fixed length column for TwoTreess' TTS-55 to adjust the laser focus with an installed Air Assist that the manufacturer forgot! If you have installed the original Air Assist, the distance to the workpiece changes. With this model, you…
🌳 Treestub Fairy House – A Whimsical Woodland Hideaway! 🧚♀ Bring a touch of forest magic to your printing collection with this enchanting Treestub Fairy House ! Lovingly sculpted to resemble a cozy home carved into an old tree stump. Some…
Hello, this is a project that i am working since my bowden coupler failed, i remembered why i hate bowden setups, actually i hate the couplers. So, i designed a direct drive mount that is compatible with my cooling solution to upgrade my…
Use freely in your own architectural projects with attribution to Citylab.lv, or purchase a Commercial-Use License on my website . (!) Print with the settings below. A small inaccuracy can lead to a failed print when printing trees and…
I 3D modeled the legs that came on my Two Trees TTS-55 Pro and added a 3/8-16 thread to the bottom to add extension risers of various lengths. The extensions are 10mm, 20mm, and 40mm columns with the same 3/8-16 thread. I also made a…
Several easy upgrades for the Two Trees SP-5 (Sapphire Plus) as shown in the video below: Bowden Tube Guide (will need 2x M4x10 and 2x M4 T-Nut) Filament Runout Sensore Mount (will need 2x M4x10, 2x M4 T-Nut, 2x M3x20) Hot End Strain…
Enable organic supports to build intertwined trees of hearts. Project file and screenshot included with my support settings, but feel free to experiment to see what gets created.
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
The TTS-55 Pro does not come with endstops but the mainboard does support them. I designed mounts for mechanical endstops that I purchased off amazon. There are 4 locations in total. 1 on each end of each axis. These will halt the stepper…
Napkin holder with Christmas motif. Great for Christmas Eve dinner, or just during the Christmas season as a decoration on the dining table Printing instructions: The model is made of two parts that fit together. Each printer prints a…
I printed in PLA, any material is ok. Please note than I had to print a new board support in order to move usb cable on the right allowing to put the board on the left. This is needed to shorten the path as much as possible otherwise new…
Trees that are simple to print and assemble. No support material. Done with Tinkercad, public project here: https://www.tinkercad.com/things/iirPsrDSOc7-simple-trees It's very easy to add new tree top designs.
These are three different types of christmas trees, they are between 125mm and 115mm tall. Xmas_TREE_V1: printing speed: 40mm/s layer height: 0.2mm perimeters: 2 infill: 30% Or you can also print it in vase mode. Xmas_TREE_V2: Tree:…
65mm Makita trim router bracket for Two Trees TTC450 pro debranded from original found at Makerworld
Today, I published my tree generator ( https://www.patreon.com/posts/tree-generator-110197775 ). You can create lots of different trees with it, and also cacti, if you use the correct settings. The cherry trees are of course without the…
Hi! This is my complete top enclosure (top cover) project for Two Trees Sapphire Pro (SP-3) with 3D printed brackets and acrylic panels. It could be used with different printers after scaling acrylic parts. Enclosure is high enough to…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
My mother asked me to design some trees as decorations for a table at a Christmas tea. I wanted to design simple models that could be printed: with no infill or supports either as modeled or scaled with a modifier cylider to add a hole…
Dvě varianty desky pro uchycení 500W vřetene s hliníkovou objímkou na CNC router Two Trees TTC450. Jedna deska pro vložení matic M5 a M6 druhá s tištěnými závity. Two variants of mounting plate to fix 500W spindle with alu collar to TTC…
Tired of always having the packaging always attached to the famous Arbre Magique or Little trees or Wunder-Baums scented tree, I designed a shield that is less cumbersome to the eye and to safety while driving. The parts to print are very…
Work in Progress 24.01.2024 - I am waiting on my plexiglas panels 27.01.2024 - The first prototype is put together. I've discovered multiple promblems/fixes/improvements I wanna do. 27.02.2024 - Added a Model…
A smaller thing I designed for a tall ship diorama I was working on that turned out pretty well I think. Only suitable for FDM since it requires bending the printed leaf sections. Check the guide below for assembly. They are a bit on the…
Remix of Hinged Christmas Tree (Print in Place).stl by productdesignonline https://thangs.com/designer/productdesignonline/3d-model/Hinged%20Christmas%20Tree%20(Print%20in%20Place).stl-537460?manualModelView=true&modelId=537460 When I saw…
Minimalist Christmas trees. Christmas model to set and decorate the home The three tree models are scalable, so different tree sizes can be created for the three variants.
4 Models to choose from! Supports come off easy! SPIRAL - SMOOTH - JAGGED - TREE WITH STAR I designed these to be a little loose so you don't hurt yourself trying to get them together. Simply print 2 of any model and screw them into each…
I've only had my TwoTrees SK1 for a week now, and have had to remove the front toolhead cover to disassemble the extruder & hotend twice already. Since my hands don't work especially well these days, dealing with the poorly designed cover…
Glowing 3D-printed christmas tree hat gently lights up with an LED tea light for cozy holiday décor. Important: select "support on build plate only " to print it You will need the bottom cap-Files from the following model to fix the led:
Based on the original model of Obecovský https://www.printables.com/model/91306-christmas-tree-led-candle I added a small hole 4mm behind the middle tree and made room to put the 3xAA battery pack of a led string. The leds can be hotglued…
This model shows a sleepy deer lying cozy in front of a forest! The deer with 3 fir trees is one model! The other 5 fir trees are separate models in different sizes! Print settings: Infill: 15 Support: Deer: Tree support (will be printed…
Check out other Christmas models: https://www.printables.com/model/1103880-winterland-christmas-rotating-ornament https://www.printables.com/model/1104831-fantasy-christmas-tree-rotating-ornament…
Printed with PLA,PETG, ABS, ASA at 0.2 or 0.3mm layer height. X: 100MM Y: 100MM Z: 2MM The thickness of one card can be changed to 1 mm or as needed
Intro Very happy with how this turned out! I made this in 4 parts so it can be printed whether you have an AMS or not. Santa fits into 2 cut outs behind the Christmas tree and smoke. some simple superglue will make it stay. there is a…
Minimalist wall art inspired by mountains and pine trees. Perfect for adding a natural and modern touch to any room. This wall art consists of 3 separate parts that can be easily joined together. The easiest method is to use a rotary tool…
Case for MKS DLC32 board and TS35 screen for TwoTrees engraver TTS55 or TT5.5S. You need : - 2 screws M3x10 for frame 20x20 mount - 2 Tnuts M3 for frame 20x20 mount - 7 screws M3x10 countersunk head - 8 screws M3x5 for the board and…
This is a simple tree generator I made in blender 4.5 for a project. They should print without support, depending on the tree settings you use. You can customize the trunk spline, the number of leaves, the trunk height, and the seed. I…
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
I designed this to rescue quadcopters / multicopters from trees. You will have to make it heavier somehow so that it flies better. The V2 (green in the pictures) has holes in the front where M5 screws and nuts can be used to make it more…
UPDATE I’ve made additional modification on pulley arm, first version was kept in place with the pin(s) but new - ARM 2 has a thread and nut allowing fine(er) adjustment and looks more "civilized". :-) Have seen few attempts to solve the…
It's an accessory to avoid fatigue in the the Two Trees Bluer bed wire connection while moving back and forth. I printed out mine cable guide in PLA. Please feel free to modify and send feedback. Also, I would like to give credit to the…
Model based on what's mounted on my SP-3. Might help visualize changes / design new hotend setup. Included both mesh and F360 project file.
I needed a STL of the TwoTrees SK1 base plate for Orca Slicer profile so I created one. This is 100% accurate to the original plate. You can use it for what you want ! Don't forget to drop a comment if you decide to use it somewhere, it's…
I wanted a rigid and light weight mount for the BL touch to reduce the variation in z-offset between prints so I designed this one. Y Offset : -40 X Offset : 0 Print Settings Printer: Twotrees Sapphire Plus Rafts: No Supports: No…
Simple printing settings with any PLA. Tree with birds wall art
We’re starting the week with a brand-new 100 Hidden Christmas Trees Challenge — and yes, it comes with its own printable PDF! 🎄✨💫 ~ Rules 📝🎄✨ Print all 100 tiny Christmas trees, each numbered from 1 to 100, and hide them all over your…
Delicate but surprisingly easy to print. If you have a thin side that is likely due to cooling direction.
Use freely in your own architectural projects with attribution to Citylab.lv, or purchase a Commercial-Use License on my website . **(!)** Print with the settings below. A small inaccuracy can lead to a failed print when printing trees…
This new design utilizes the existing Sapphire Plus frame components, and it allows better and more accurate printing quality at much faster printing speeds. This design also allows using VZBot or RatRig EVA printing heads at expense of…
stabilizátor osy Z pro Two Trees Bluer Verze bez pomocí šroubů a na dvě ložiska, bohatě stačí použít jen jedno (608) Tisk PLA
Wood bases This thing helps you play in a forest. There are a couple of forest bases to define terrain area (helps line of sight and difficult terrain). The forest bases has holes where you place the actual trees. You can print the empty…
Für die Bewässerung von Pflanzen oder kleinen Bäumen im Sommer. Am besten füllt man es mit Poren Gestein das auch Wasser speichern kann und gibt etwas Dünger mit hinzu. Im Sommer kann so direkt an den Wurzeln bewässert werden ohne das das…
Drag chain credits goes to https://www.prusaprinters.org/prints/40345-fully-parametric-drag-chain Drag chain end stop credits goes to https://www.prusaprinters.org/prints/104140-end-connectors-for-the-fully-parametric-drag-chain I printed…
V4 of the printhead is out! https://www.printables.com/model/418000-poison-printhead-v4-twotrees-sapphire-pluspro update log: 06-12-2022: small change to the cooling duct because it was a little too close to the hotend. This is the…
This is a small variation, just 35mm tall, of my big toplid for the SK1, this one is just laid on top of the printer. Its registered via the buttonheadscrews in the top. I did NOT print this Lid , but since it's a variant of my big lid it…
Modern christmas trees, perfect as minimalist decoration Large tree 200 x 150 x 18 mm Medium tree 150 x 100 x 18 mm Small tree 100 x 75 x 18 mm If you want to support me or get commercial licenses you can join a patreon membership:…
Plate to attach 65 mm CNC spindle holder from Aliexpress to TTC-450 machine. Designed for holders that use 80x25 mm mounting hole distances. This plate is thick for a reason! You need a specific distance from the router to the machine so…
Manual Z-axis for focusing Two Trees TTS-10 laser engraver, replacing original height adjustment mechanism. Laser mounting plate with multiple offsets, for different laser builds. Mounts to laser module with 4 M3x12 screws.…
65mm Makita trim router bracket for Two Trees TTC450 pro. shorter distance between holding plate and milling cutter center. Overhangs have been removed as far as possible I printed the adapter from PETG. Layer height: 0.2mm Number of…
Good morning, Welcome to my profile, full of models and miniatures :-) I have 3 Coniferous trees for you as decoration, for a diorama, or just for the edge. Very nice trees. It is suitable for coloring. My children absolutely love it :-).…
Printed the original model. I am using air assist and the model requires modification for that because of a valve stem that sticks on the side, and because it changes the dimension of what is at the bottom of the diode. I made this remix.…
Simple to print, anti vibration feets for the sk1. You can put the same rubbers in the feet as in the bamb lap series. The original ones, or those from aliexp. :) The SK1 is a nice clone of the Bambu Lap P1P. I will upload more addons in…
Looking for a nice pool for your reptile friend? Well look no further! Prints easily and will hold water just fine on .12/.14 setting. Included is the STL for the leaves that attach to the trees. Tree Holes are designed so the leaves will…
These trees were created while working on another project, so I thought I would share them here in case they are useful as re-usable components, hence the CAD assets are also included. You need to print one “Base” for each tree. They…
Prologue This is a WORKING remix of the SP-5 H2 mount by Lee82UK. The original design had several flaws, including by not limited to: Impossible to mount 2 5015 fans on this extruder and not hit the SP-5 frame. The BLTouch probe when…
The tree will soon be in a potted version on my profile V https://www.printables.com/@ChessJesus_2613066 This is the Christmas Tree Truck. https://www.printables.com/model/1096669-christmas-tree-truck Feel free to edit and remake this.
These are a remixed collection from the excellent 4-in-1 Christmas Tree as well as a trunk from @JamesThePrinter for a simple holiday light. Trunk fits all trees, use the alignment tool and a bead of superglue to attach the two parts. Put…
Print with at least pteg but I personally like PC-CF filament, 4 layers, 4 perimeters and 25% infill will be ok. chain what I got - https://www.amazon.co.uk/gp/product/B09NKSPKS2/ plus you need x6 m4 screws extra plastic inserts, 2x for…
All but main body part 1 can be printet without support.
This is a modified version of an OpenSCAD example by Torsten Paul. With the original one, after extruding, the objects suffered of some strange gapes especially when using higher angles. I added a few parameters and other modifications to…
Overview This design lets you attach the Smart Orbiter v3.0 to the TwoTrees Sapphire Pro. My goal was to have a compact design that looks tidy and gives you a good view on the printhead. Also I designed with minimal support in mind.…
