Search results: tua

Sort order

1,691 models

P
PrintablesWayan Traversat

Ender 3 v2 Neo - Cooling Fan Duct 2x 4020 Fans (Noctua)

Note: For assembly instructions please follow the original post Version I: I initially pritned the Neo Thang cooler for the hot ended of my Ender 3 Max Neo. I however was wondering why both necks were so long. So I shorted both. This…

Downloads
1,810
Likes
245
Rating
4.93
P
PrintablesCarter

Pi4B Flat Fan Case Noctua 40x10 5V/3.3V SnapTogether

Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…

Downloads
1,585
Likes
134
Rating
4.92
P
PrintablesCarter

Raspberry Pi 3B+ Case for Noctua 40x10

Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…

Downloads
1,491
Likes
176
Rating
4.94
P
Printablesmafredri

Xbox 60mm Noctua Fan Mount Adapter (for Original Xbox)

This is a 60mm Noctua fan mount adapter for the Original Xbox. It was created to replicate the look and feel of the original Xbox fan (there are a few different fan models, but this one is based off of the Nidec fan). Improved airflow was…

Downloads
1,162
Likes
92
Rating
4.83
P
PrintablesTiragesPro

A Raspberry Pi 4 (RPi 4) Snap-In Case with optional Noctua Fan.

This is a fast and easy to print case for a RPi 4. The cover simply snaps-in making it simple to access the board. It is compatible with all versions of Raspberry Pi 4. If desired, you can add : 4 screws (M2.5 x 5) to secure the board.…

Downloads
900
Likes
48
Rating
4.88
P
PrintablesCalebTimoteo

Perpetual Calendar - Home Decoration

Any feedback would be greatly appreciated . Work in progress Use 6=9 Nozzle: 0.4 Layer: 0.2-0.24mm (Recommended) No Supports needed No Brim needed Scale it as you like :)

Downloads
872
Likes
416
Rating
4.83
P
PrintablesMauro

Octoprint - Raspberry Pi3 case with internal Noctua fan

update 02.06.2020 I corrected files in the download section. Now they are correctly a cover and a bottom, and not just two covers. Thanks to David Ewen for letting me know ! __________________________________________ This is an…

Downloads
475
Likes
69
Rating
4.5
P
PrintablesCavalierLabs

Cactuar watering can

This small watering can is shaped like a Cactuar from the Final Fantasy series! Just for fun - it's more cute than functional (the handle is a bit small), but it does work! Pre-sliced file available to print in potato quality (draft,…

Downloads
203
Likes
55
Rating
5
P
PrintablesK4tana

NOCTUA SNAP ON 40MM FAN COVERS

Are you tired of getting those pesky fingers caught on fan blades? Want an easy way to prevent that whit out requiring any tools or hardware? Introducing the AMAZING SNAP ON FAN COVERS!!!!!!! Just print them SNAP them and BADABING…

Downloads
157
Likes
32
Rating
5
P
Printablesquattro

PiKVM Case Mod for silent Noctua 40mm Fan

This is a remix of the original Case published here: https://docs.pikvm.org/stl/v3.3/ The original case is just fine when placed into one of those dedicated server rooms which tend to be extremely loud with hundreds of fans of all sizes…

Downloads
157
Likes
28
Rating
0
P
Printablesfifindr

Sri Yantra Coaster - Spiritual Symbol

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Enhance your space with the Sri Yantra Coaster ! Measuring 100 mm in diameter and 4 mm in thickness, this coaster showcases the ancient and powerful…

Downloads
144
Likes
33
Rating
4.5
P
PrintablesCl@Gr3

Noctua NA-FC1 Container for Ikea enclosure MK3S+ and MK4 and MMU2S/3

I've take inspiration from 3D Enclosure Extractor Fan with HEPA Carbon filters v2 (Thanks Colin ) then I decided to use Noctua NA-FC1 fan speed regulator but unfortunately no holes to fix it on Ikea Lack Enclosure. Easy to print and use,…

Downloads
141
Likes
12
Rating
0
P
PrintablesPeter Farell

Late Minoan Ritual Jug

‘Barbotine’-style ritual jug with relief decoration. Imitating objects from the Late Minoan II–III periods (ca. 1450–11 the tactile Barbotine ware , studded with knobs and cones of applied clay in bands, waves and ridges, sometimes…

Downloads
132
Likes
43
Rating
5
P
PrintablesJiri Blazek

Raspberry Pi 4B Box (Noctua Fan variable)

Box for Raspbberry Pi 4B. You can use screws M2 8 mm. Fan is Noctua NF-A4x10 5V. Print instructions Material ASA.

Downloads
105
Likes
8
Rating
5
P
PrintablesMrLogston

Norway Maple Seed Whirlybird that actually works, 5 minute print time

Maple seeds remind me of the fall, as they literally fall during the Fall. There are none near me, so why not print it! video of drop test #2: video of drop test: After searching online and finding a few existing designs to print, none…

Downloads
98
Likes
27
Rating
5
P
PrintablesMauro

Octoprint - Raspberry Pi3 case with external Noctua fan

Let me start to thank user 0110-M-P from Thingiverse for sharing his work in Thingiverse: https://www.thingiverse.com/thing:922740 I remixed his great job to obtain following results: active cooling with Noctua 40x10 5V fan less possible…

Downloads
83
Likes
7
Rating
0
P
PrintablesMajohnes

Tuya ZigBee Radiator Actuator Thermostat Smart ADAPTER

This custom-designed part serves as an adapter between a SMART thermostat “ Tuya ZigBee Radiator Actuator Thermostat Smart TRV Thermostatic Valve Temperature Controller Support Alexa Google Home Smart Lif ” and the pre-existing heating…

Downloads
78
Likes
4
Rating
0
P
PrintablesColin

Prusa Box Noctua Fan Speed Controller NA-FC1 Housing for Modular Front

For PrusaBox modular front panel. Originally designed for the w1219 controller, but adapted for the Noctua NA-FC1 controller. Includes 10mm hole for a switch to control Pi. Retaining backplate also included. Also see…

Downloads
74
Likes
10
Rating
0
P
Printablesetv99

Homematic 2x Actuator Housing

A smart Housing for the Homematic Smarthome Actuators - in this case for a 2x switch. The actuator is fixed by a smal gap where the tab goes in and opposite there is a small pin so it cannot move! The topcover is fixed with one M3 srew…

Downloads
69
Likes
8
Rating
0
P
Printablesk.makesstuff

Claw with Drive screw linear actuator

This is a Claw with Drive screw linear actuator. I wanted to leverage by bolt and nut design somehow and this is it. First part to print is the nut with wings. Then you can print the body and add a print pause or color change to…

Downloads
52
Likes
3
Rating
0
P
Printablestommi

IKEA LACK Switch Shroud with Noctua NA-FC1

This is a switch shroud inspired by https://www.prusaprinters.org/de/prints/2263-switch-for-ikea-lack-enclosure. I needed a cut-out for my Noctua NA_FC1 pwm fan controller. Also i mounted it on top of the enclosure so the screwholes are…

Downloads
47
Likes
15
Rating
0
P
Printablesquattro

A Round TUIT (read description on why this is an actual tool)

So why is this supposed to be a tool? You can't do anything with it or can you? You can. Imagine this: A: “Have you repaired the lawn mower?” B: “No, I haven't got around to it.” A: “You haven't got a round TUIT you say?” B: “Yeah.” A:…

Downloads
47
Likes
16
Rating
5
P
Printablesgybalazs

Prusa Box Enclosure - Einsy motherboard cooling duct with Noctua fan

Inspired by Colin ( https://www.printables.com/model/109599-prusa-box-enclosure-einsey-motherboard-cooling-duc ) I made my own version which is able to fit the Noctua A4x20 20mm tall fan. This duct works well if the printer has the…

Downloads
41
Likes
7
Rating
5
P
PrintablesSaltyScott

Noctua NA-FC1 Fan Controller Case and Knob

This is a small case with a window for a Noctua fan controller. There are 2 slots to run wire out of and room in side to bundle up or hide excess wires. The knob is press fits into the fan controller if you want it to be bigger.

Downloads
36
Likes
2
Rating
0
P
PrintablesOdd Inventor

No, Actually Very-very-low Poly Pikachu_final

Designed specifically to beat @chmarr 's Very-low-polygon Pikachu Features: Lowest-polygon Pikachu, for realsies. 33% less polygons! (4 polygons vs 6), an impressive optimization if I do say so myself. Easy, fast print. No supports…

Downloads
16
Likes
11
Rating
0
P
PrintablesNoctua_at

High-efficiency Noctua 120mm fan grill

Custom-engineered for optimal performance-to-noise efficiency in use with the Noctua NF-A12x25 fan. Carefully optimised to ensure smooth pressure gradients as the fan blades pass the radial struts, resulting in higher airflow performance…

Downloads
14,330
Likes
1,973
Rating
4.89
P
Printablespcnc

Actually Parametric Gridfinity – Base Grid + Bins

Here is a very parametric and ✨ now Configured ✨ Gridfinity Base Grid and Bin Fusion 360 file with 3MF's. I'll keep adding and updating as we develop new items. See our collection . Now Standard 3MF Files – Rev 2 14 Oct 2023 All F3D and…

Downloads
7,529
Likes
1,285
Rating
4.74
18+

The source marked this model as adult content.

Downloads
4,687
Likes
386
Rating
5
P
Printablesnhchiu

Noctua Airflow Amplifier for Different Fan Sizes (with Gopro and tripod mount)

Updated: 2024/07/29 Added 180mm version (Silverstone AP181, mounting hole spacing 165mm). Updated: 2024/06/09 Remodeled the outer surface so now it can be scaled to more different sizes without making the shell too thin or too thick. It…

Downloads
4,667
Likes
897
Rating
5
P
PrintablesSascha Curth

Spatual - Scraper - Spachtel

30% infill 0.20 detail http://www.thingiverse.com/thing:3406899

Downloads
3,621
Likes
208
Rating
4.85

Wood-Carved Dark Ritual Mask

An ancient mask carved out of enchanted wood. Scale to desired size. Supports required. No holes included, make your own! I chose to print at this angle to minimize supports and hide seams on rear side. Tree Supports on build plate only…

Downloads
2,728
Likes
871
Rating
5
P
PrintablesEIGA

Duct Peg for AXP-90 x47 + Noctua NA-FD1

Intended to be used in the Formd T1 case in 3 slot configuration with the air cooling holy trinity: Thermalright AXP-x47 Full Copper Noctua NF-A9x14 Noctua NA-FD1 The pegs are designed to be friction fit and clear the fan retainer clips.…

Downloads
2,586
Likes
84
Rating
5
P
PrintablesFelix

Actually Floating Benchy (Attachment)

This simple attachement will let your Benchy float in less than an hour of printing time! I printed mine with NO INFILL , and i recommend using tree supports , they are very easy to remove. Please make sure to check out my other benchy…

Downloads
2,185
Likes
311
Rating
4.92
P
PrintablesLoboCNC

Robot Actuators

This is a collection of three different sized compound planetary gearboxes with compact form factors ideal for assembling into robot arms. All three sizes use 38.4:1 compound planetary gearing and include an integral slew bearing. The…

Downloads
2,098
Likes
161
Rating
5
P
PrintablesJakob Kerber

Noctua NF-A9 92mm Fan

This model is not mainly intended to be a print model, I still included an STL-file, if you want to do it. Its main purpose is to be used for modeling a support for it or when ever you want to use it. You can also use it as a render model.

Downloads
2,067
Likes
61
Rating
5
P
PrintablesSven

Noctua Style Desk Fan 140mm

Inspired by MajorHardware, i redesigned the whole thing with Airflow in mind, the design works really great, it delivers a lot of air movement with minimal noise. You can mount the fan either by screws or like me just with 4 zipties, the…

Downloads
1,889
Likes
244
Rating
4.73

Stuart in the Wall

Stuart in the Wall

Downloads
1,764
Likes
442
Rating
4.92
P
PrintablesNoctua_at

NA-IS1-12 Inlet Spacer for Noctua 120x25mm fans

The NA-IS1-12 is a 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…

Downloads
1,732
Likes
291
Rating
5
P
Printablesdswinton

Gridfinity SD Card Holder (Actually Good Edition)

Holds 4 full-size SD cards in a 1x1 Gridfinity square. Awesomeness: Holes are 2CM deep (SD cards are 3CM) so even if you bump it, they won't go flying all over the place Holes are offset, creating a 1CM gap for your fat fingers to go…

Downloads
1,622
Likes
145
Rating
4.91
P
Printableseyalshtark

Actually useful Sheep and Goat toilet/tissue paper roll holder and dispenser

UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…

Downloads
1,575
Likes
481
Rating
4.8
P
PrintablesMaxBN

Real Utility Knife Remix – Compact, Locking, One-Hand Operable (2026 Actual)

🔧 Real Utility Knife Remix – Compact, Locking, One-Hand Operable This is a thoughtfully re-engineered remix of the excellent original model: https://www.thingiverse.com/thing:3677766 I made several key improvements to enhance…

Downloads
1,490
Likes
424
Rating
5

Twhistla - Tesla Cyberwhistle with actual tooting action.

Tesla Cyberwhistle with actual whistling action. Not the most efficient or loudest whistle you've ever used, but it works. Calling this the “Twhistla” after Simon Giertz's Truckla Tesla car conversion.

Downloads
1,483
Likes
213
Rating
4.89
P
PrintablesValidAsian

Noctua Inspired Desk Fan Mount

This is inspired by Noctua's NV-FS1 desk fan mount with some changes for 3D printing and practicality. Notes: For my desk fan, I decided to use a USB step up converter to power the 12v fan and bought the airflow amplifier. Buying the…

Downloads
1,451
Likes
414
Rating
4.93
P
PrintablesRobbo

Simple 28BYJ-48 linear actuator

Small and simple actuator using a 28BYJ-48 stepper motor. Re-used an existing helical gear and rack design and created a new base and mounting boss + pin. Needed a quick and dirty solution so this actuator is created using basic shapes in…

Downloads
1,301
Likes
138
Rating
4.2
P
PrintablesN7 Cat

9g Servo Linear Actuator (Ball Bearing)

Prints as one part, some trimming of the raft will be needed but I've added clearances around the gears to reduce trimming needed there. The intent of this is to create a relatively low cost / low backlash linear actuator using the common…

Downloads
1,296
Likes
173
Rating
5
P
PrintablesHarrison

Modular and SUPER Fast Linear Actuators

All information to build the actuators can be found in the Bill of Materials. For (somewhat) detailed assembly instructions, see the last section of this video:

Downloads
1,253
Likes
133
Rating
0
P
Printablesnoamtsvi

GUITAR TUNERS that actually work!!

check out the video of these tuners: The purpose of 3D printing guitar tuners is mostly for DIY musical instruments and also someday I will design a guitar that is 100% 3D printed. In addition they can be used as replacement parts on an…

Downloads
1,243
Likes
234
Rating
5
P
PrintablesMK_Design

Perpetual for a marble run

This is a model, similar to a perpetual motion mashine. The marble enter in the upper level, take a round in the carousel, and leave in the lover level. (difference 20mm) You can choose between 2 possible entrances and 3 possible exits…

Downloads
1,221
Likes
271
Rating
4.74
P
PrintablesSuperIntendent

High-efficiency Noctua 140mm fan grill

Noctua design high efficiency fan grille for 140mm fans. Update : Modified corner radius to 8mm.

Downloads
1,220
Likes
85
Rating
5
P
PrintablesRetro Frog

Xbox 60mm Noctua Fan Mount

This is a remix (of sorts) of one of my own designs, the Nexus 70mm fan mount for the original Xbox. The Nexus 70mm fan works quite well in the original Xbox, however I've had folks ask me about using the Noctua 60mm fan instead. This is…

Downloads
1,169
Likes
103
Rating
5
P
PrintablesMZ4250

Creature Bases - Small, Med, Large, Huge and Gargantuan

The sizes you need for your character markers! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…

Downloads
1,158
Likes
52
Rating
5
P
PrintablesNoctua_at

NA-FMA1 120/140mm Adaptor for Noctua 120mm fans

The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…

Downloads
1,158
Likes
458
Rating
5
P
PrintablesHolzerMax

Victorinox Toothpick Replacement 50mm - actually good quality model

As I could not find any really good models of the standard Victorinox Toothpick, I designed my own in a few iterations. This is now the fourth version. It fits all my (by now relatively large selection of) Victorinox Swiss Army Knives…

Downloads
1,150
Likes
210
Rating
4.9
P
PrintablesSuperIntendent

High-efficiency Noctua 80mm fan grill

Noctua design high efficiency fan grille scaled down to 80mm. Added a pocket to compensate for using noctua NA-SAV2 Anti vibration mounts.

Downloads
1,147
Likes
59
Rating
4.88
P
PrintablesLoboCNC

Steel String Mandolin (that you would actually want to play)

*** Updated version with additional bracing for stability *** I had good success with my steel string guitar , but it required a huge printer. For folks wanting a more manageably sized project, I decided to try a mandolin instead. The…

Downloads
1,131
Likes
783
Rating
5
P
PrintablesBrody

Bambu Lab MC Control Board Fan Noctua Upgrade

Bambu Lab MC Board Fan Noctua Upgrade Designed to improve cooling to the control board heatsink using: Noctua NF-A4x10 5V PWM , NF-A4x20 5V PWM or the original Bambu MC fan. Files Noctua Fan STL Noctua Fan 35x18 Noctua Fan 39x22 Noctua…

Downloads
1,073
Likes
391
Rating
5
P
PrintablesSuperIntendent

High-efficiency Noctua 92mm fan grill

Noctua design fan grill sized for 92mm fans like the Noctua NF-A9

Downloads
1,068
Likes
66
Rating
5
P
Printablesm2rechtin

3D Printed Linear Actuator

Video showing assembly with hardware list in the description: https://www.youtube.com/watch?v=-C9e--3nvro

Downloads
1,058
Likes
327
Rating
4
P
PrintablesNoctua_at

NA-IS1-14 Inlet Spacer for Noctua 140x25mm fans

The NA-IS1-14 is a 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…

Downloads
1,056
Likes
121
Rating
5
P
PrintablesHorbit

LSI 9300-16i Noctua NF-A9x14 Fan Shroud

This is an older design. Please consider also checking out this one created by @ briancmoses : https://www.printables.com/model/1046107-lsi-9300-16i-hba-cooling-fan-shroud This HBA runs pretty hot and I wanted to mount a fan to it instead…

Downloads
1,047
Likes
72
Rating
5
P
Printablesradzaga

Rituals Car parfume Vent Clip - Hyundai Tucson (NX4)

Since the clip that comes with Rituals Car perfume is too narrow/small to use on the Hyundai Tucson vent wing, I designed this for the same and it fits pretty well.

Downloads
1,001
Likes
54
Rating
5
P
PrintablesGreymanx

AXP90-x47 Cooler Duct for FormD T1 3-Slot Mode (Noctua Swap)

I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…

Downloads
983
Likes
88
Rating
5
P
PrintablesHaz1

Raspberry Pi 4 Top - Screwless FAN Mount (30/40mm Noctua)

This is a remix of the great Raspberry Pi Case Top of Malolo . We've had a good cooperation over the last few days and have worked on the design and new ideas to make the case even better. So the idea to integrate a fan without the ugly…

Downloads
968
Likes
125
Rating
4.91
P
Printablesshiura

3D Printed Perpetual Calendar Clock Ver. 2

A Clock with a Perpetual Calendar Mechanism This clock features a perpetual calendar mechanism that correctly handles all month lengths, including February in leap years . Despite the limited torque of a standard quartz clock movement, a…

Downloads
961
Likes
499
Rating
5
P
Printablesm_IDEX

Push-Push Latch Actuator (aka Strike)

I designed this actuator to use a common push-push latch with my Magnetic IDEX DIY 3D printer Link to Push Latch: https://amzn.to/3P1Hbwc Push-Push Latch CAD Model NOTE: The original download link/URL is broken. Added the complete STEP…

Downloads
957
Likes
83
Rating
5
P
PrintablesLoboCNC

Linear Actuator with 3D Printed Ball Screw

This linear actuator features an integral 3D printed ball screw for smooth, efficient operation. The ball screw and nut from my previous model are integrated into the moving actuator tube. It uses 28 6mm dia. airsoft BB's for bearing…

Downloads
945
Likes
289
Rating
0
P
PrintablesCollingall

Dreamcast Noctua Fan Mod

These are the parts that are required to mount a Noctua NF-A4x10 5v inside of your Dreamcast. This mod only works in models VA1 and VA2 systems. There are two versions of the latch, the regular one is designed for the original Sega system…

Downloads
902
Likes
80
Rating
5
P

Playstation 2 Quiet Fan Mod - compatible with fans from 50x10mm to 60x25mm (Noctua)

Edit from April 24th 2023 Per request, I've added holes which “ should” work with SCPH-3000x I don't have any other model on hands than my 39000 so do it at your own risk. I'm keeping the old ones working on 39000 for now.…

Downloads
878
Likes
88
Rating
5
P
Printableskeybl

Minion Stuart

https://makerworld.com/en/@keybl - makerworld https://www.thingiverse.com/keybl1/designs - thingiverse https://cults3d.com/@keybl - cults3d if you want to support me financially - https://boosty.to/keybl1 This project was made based on…

Downloads
871
Likes
118
Rating
5
P
PrintablesDingo_aus

3d Printed Linear Actuator

This is a rack and pinion style linear actuator. Due to the inclusion of a worm gear drive, the rack will maintain its position without the requirement to "hold" the gears static with a motor. This requirement was necessary in the…

Downloads
870
Likes
118
Rating
0
P
PrintablesNairod

6025 NF-A6x25 5V PWM Noctua Fan Holder for Control Board for Bambu Lab X1 X1C P1P

6025 Fan Holder for Control Board I used Noctua NF-A6x25 5V PWM Bambu > Noctua Dark Gray>Black (GND) Black>Yellow (+5V) Light Gray>Green (RPM/Tach) White>Blue (PWM)

Downloads
863
Likes
278
Rating
4.85
P
PrintablesNoctua_at

Framework Destktop side panel with Noctua-style fan grill

This custom side panel for the Framework Desktop mini-PC can make it run 5-7dB(A) quieter combined with the custom fan duct. See this blog post for further info: https://noctua.at/en/how-to-make-the-framework-desktop-run-even-quieter

Downloads
857
Likes
76
Rating
3.5
P
PrintablesMarko Simic

Linear Actuator

Assembly Guide: This is an attachment for the SG90 Servo that allows it to function as a linear piston. It provides a force of approximately 5 N in both directions and can extend up to 45 mm from its initial position. Step-by-Step…

Downloads
854
Likes
38
Rating
5
P
PrintablesSweetPrints

HEPA + CHARCOAL FILTER / FUME EXTRACTOR - NOCTUA 120MM

Hello! Here is my design of air filter/fume extractor for my enclosed or not printers! I designed it for these HEPA filters: https://fr.aliexpress.com/item/33037955841.html?spm=a2g0s.9042311.0.0.27426c37H91RYB And finally I decided to use…

Downloads
854
Likes
415
Rating
4.8
P
PrintablesMAKER_3D_LAB

Roronoa Zoro - Statua 3D da Collezione

🗡 Roronoa Zoro - Statua 3D da Collezione Porta a casa l’intensità e la potenza del leggendario spadaccino di One Piece con questa straordinaria statua 3D di Roronoa Zoro. Realizzata con cura maniacale per i dettagli, la figura cattura…

Downloads
853
Likes
76
Rating
5
P
PrintablesJohn Parks

Elegoo Centauri Carbon Printhead Fan Grille (Noctua NF-A12x25 fan grille)

I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…

Downloads
836
Likes
120
Rating
4.85
P
Printablesspinach

rack and pinion (Linear Servo Actuator)

print all of the files. connect the gear to a servo horn.glue the motor to the box.

Downloads
829
Likes
54
Rating
5
P
Printablesrreibel

Perpetual Motion - daVinci Wheel

A remix of the excellent Leonardo da Vinci perpetual motion wheel concept by RichMac (https://www.thingiverse.com/thing:44185). I remixed it to utilize a common 608z bearing and also some minor other dimensional changes. Enjoy! Print…

Downloads
800
Likes
93
Rating
3.75
P
Printableslazor226

Noctua's NV-AA1-12 3D printable desk fan assembly (simplified)

I have compiled a collection of models that can be used to assemble a 3D printed version of Noctua's NV-AA1-12 Airflow Amplifier so it can be used as a desk fan. You will need the following hardware: 2x M4-12mm screws 2x M4 heat-set…

Downloads
788
Likes
104
Rating
5
P
PrintablesBaGooN

Noctua 40mm Fan Guard 27+1 Bundle

This fan guard is perfect fit in size for Noctua 40mm fan. Required screws: 3x M3x14 screws 1x M3x25 screw Print settings: Filament: PETG Layer height: 0.2mm Supports: no Perimeters: 2 Be careful not to over-tighten the screws, otherwise…

Downloads
763
Likes
150
Rating
5
P
PrintablesAnthony DAUGUET

Linear servo actuator for SG90

Very simple to print. Use 2 M2 screws for servo mounting and 2 M3x10 screws for the rack

Downloads
756
Likes
71
Rating
4.5
P
PrintablesN1ckTr1ck

PS2 Replacement Bracket for Noctua 60mm Fan SCPH-50004

Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…

Downloads
754
Likes
83
Rating
5
P
PrintablesEWJ

140mm Noctua Amplifier Desk Fan

There is little clearance where the base attaches to the grill piece, so consider using exclusive slicing tolerance or they might require some post-processing.

Downloads
725
Likes
72
Rating
4.8
P
PrintablesEdward

💨 Noctua Desk Fan 💨

A re-design of the desk modification for the computer Noctua fan. The fan you need is the 140mm 5v* fan: https://www.amazon.co.uk/dp/B07DXR1Y73 *you can use a 12v fan however you will need to use a controller in that case as seen in the…

Downloads
717
Likes
143
Rating
5
P
PrintablesThinkDima

Raspberry Pi 4 Case 3030 hanging mount for Prusa MK4/MK4S/MK3/MK3s v-slot with 40mm Noctua fan

Inspired by https://www.thingiverse.com/thing:2843889 I used the one linked above for the Pi3, but needed an upgrade for Pi4 and decided to use a noctua 40x10 fan, as the new raspberry runs a little hotter. This can be mounted on any side…

Downloads
703
Likes
90
Rating
5
P
PrintablesGerber

Avatar Linear Servo Actuators

This is a general purpose linear servo actuator (pusher style). Two sizes have been designed, for different space constraints and force outputs. These use continuous rotation servos which helps keep the cost very low. Off the shelf…

Downloads
696
Likes
64
Rating
5
P
PrintablesPetclaud

Prusa i3 MK3S Noctua Extruder fan cover

The first Prusa MK3's were shipped with Noctua fans with hideous colors. Hence I made a cover for the Noctua fan as found here: https://www.thingiverse.com/thing:2730049 When Prusa released the new MK3S parts, some modifications to the…

Downloads
679
Likes
79
Rating
4.63
P
PrintablesTareku

Snapmaker U1 Mainboard & PSU Cooling Brackets for Noctua NF‑A9x14 Fans + Chamber Insert/Divider

This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…

Downloads
672
Likes
132
Rating
5
P
PrintablesNate DiSalvo

Modified servo linear actuator

I modified this for use with Tetrix pieces. This design has become my most popular and I want to credit it's original designer. See the remixed design Print Settings Printer: Qidi tech Rafts: Doesn't Matter Supports: Yes Resolution:…

Downloads
646
Likes
55
Rating
5
P
Printablesw00h

Noctua Airflow Amplifier Base remix

So, I quite liked Lukaku's original design, but I decided to try to improve on it a bit. Changes remodeled mostly by the original dimensions overall design a bit sleeker (imo) with filleted edges and a more integrated upper part cutout in…

Downloads
646
Likes
94
Rating
5
P
PrintablesCrambambuli

Voron V2.4 Side skirt mod for noctua Fan NF-A6x25

This is a mod for my Voron 2.4 Category: 3D Printer Parts

Downloads
642
Likes
111
Rating
4.55
18+

The source marked this model as adult content.

Downloads
609
Likes
349
Rating
5
P
PrintablesNoctua_at

NA-AVP1 anti-vibration pads for Noctua 120/140mm fans

NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems: https://noctua.at/en/na-savp1

Downloads
605
Likes
132
Rating
5
P
Printableshomegeek

3D Printed Robotic Arm Actuator

The entire gear system is 3D printed. But the following parts will be required for a smoother operation. All listed parts are from McMaster-Carr but are available in most specialized shops: 1x Stepper motor NEMA 17: 6627T64 4x Ball…

Downloads
604
Likes
129
Rating
0
P
Printablesdanowall

Linear Servo Actuator

Linear actuator used for Adafruit's Xenomorph Halloween candy bucket project. https://learn.adafruit.com/xenomorph-halloween-candy-bucket Remixed from potentprintables original Linear Servo Actuators:…

Downloads
592
Likes
72
Rating
5
P
Printablesshiura

Quartz-movement Based Perpetual Calendar Clock

New version (central gear is hidden behind the front panel) is published here . A clock with a perpetual calendar mechanism that correctly handles all types of months, including February in a leap year, has been developed. Despite the…

Downloads
592
Likes
212
Rating
5
P
PrintablesKatie

Christmas Ornament Hook - 3 sizes for all situations

The build is straight forward, simply print with your favourite filament. I use a green PLA, but most filaments should be suitable. The wide openings make it easy to add 3D printed ornaments onto your tree. Nozzle: 0.4mm Layer height:…

Downloads
580
Likes
47
Rating
5
P
Printableshandro

LSI 9300-8i Noctua NF-A4x10 Fan Shroud

Fan shroud to mount an Noctua NF-A4x10 to an LSI 9300-8i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9300-8i, but this…

Downloads
571
Likes
42
Rating
5
P
PrintablesEvanRLD

[BETA] Articulated Robotic hand - servo actuated

This is a BETA version : the 4 big fingers are fully working but the palm is not finished yet, you will be able to use it but it will need some minor modifications. I will update as soon as I fix these issues. Also the thumb is not…

Downloads
557
Likes
66
Rating
0

Actually Parametric Extension Cord Holder

Pretty much made this: https://www.printables.com/model/1102040-extension-cord-holder-parametric It claims to be parametric, but there are no parameters to change! The screw holes are positioned a bit differently in this design and I…

Downloads
553
Likes
230
Rating
5