Search results: tubi

Sort order

Counting matching models…

P
PrintablesRoberto

MMU2 - VARIE MODIFICHE - RINFORZI - AGGANCIO TUBI - CABLAGGIO FILI - SCOLLEGAMENTO DA EINSY

Ho apportato alcune modifiche alla MMU2. 1)- Il piano di base è rinforzato a 4 mm. 2) - Rinforzato anche il coperchio supporto elettronica. 3) - Riporto a misura del fianco sinistro. 4) - Incluso nella base le filettature per i raccordi…

Downloads
81
Likes
11
Rating
5
P
Printableshillct

Desktop Tripod using 1/4 NPT loc-line tubing

This tripod can be assembled using 1/4 NPT loc-line compatible tubing as legs. Beyond the 3D printed parts, you'll need a standard ¼ 20 hex head bolt 0.9" or 23mm in length (for camera mounting). Shorter bolts are useful as well, if…

Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
5
Rating
0
P
PrintablesREMLURELMI

Remix - MMU PTFE tubing clip with numbers

Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: Optional

Downloads
58
Likes
8
Rating
5
P

Tormach 440 Coolant Drain to 1/2" ID Tubing

This is a adapter for the Tormach 440 chip pan coolant drain with 1/2" ID tubing. Print instructions PETG 0.2mm layers, with gyroid infill, and 4 perimeters.

Print approx. €3.69–€4.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
4
Rating
0
P
PrintablesCompanyCelest

T & U Connectors for Cat Hammock Tubing

4-piece cat hammock designed to replace broken parts. PETG printed for durability

Print approx. €2.99–€3.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
7
Rating
0
P
PrintablesMarko Borsic

PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor

simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…

Downloads
3,665
Likes
543
Rating
4.8
P
PrintablesJoe the Builder

AD5X IFS Tubing Removal Tool

As the filament is loading and unloading this cause the PTFE tubing to move and add a ever so slight pull upwards on the ring inside the fitting, this causes it to get stuck on to the tubing, making the standard method of removing the…

Downloads
3,247
Likes
244
Rating
4.95
P
PrintablesExtrutim

Cable Insertion Tool | Split Wire Loom Tubing

A tool to easily insert cables into split wire loom tubing. I created this tool for a friend in sizes 8.5mm, 10mm and 13mm. If you need another size you can just take the 10mm version and scale it. Please leave a like if you enjoy my…

Downloads
2,400
Likes
438
Rating
4.85
P
PrintablesLachlan A

PTFE Tubing Connector

A connector to add inline for your filament supply system. Good way to quickly and easily disconnect the tubing to clear a blockage or to switch between filaments in a dry box. Just twist to connect and disconnect. Simple to print with no…

Downloads
1,642
Likes
190
Rating
4.72
P
Printablescmh

Guide funnel for loading filament into PTFE tubing

Simple funnel that presses onto the end of a 4mm PTFE tube so it's much, much easier to load 1.75mm filament into the tube. I've been using this for years anywhere that the printer has a PTFE tube as the inlet for filament and it makes…

Downloads
1,404
Likes
178
Rating
4.75
P

Remix - Clip added - PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor

Thank you Marko Borsic for the original design. It fits great, and prints well. I've noticed that the stiff 6mm PTFE tube coming from my Polydryer filament box tugs on the adapter, and pulls up the side that the tube goes into. I've added…

Downloads
1,277
Likes
156
Rating
5
P
PrintablesBasementLAB

Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale

Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale Piping and Fittings for Installations for PVC Electrical Conduit 90 degree Ø16/20/25mm 120 degree Ø16/20/25mm 135 degree Ø16/20/25mm 150…

Downloads
1,275
Likes
148
Rating
4.67
P
PrintablesmoWerk

Hose Coupler | Water Line Extender | Zip Tie Tubing Repair Connector

Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…

Downloads
836
Likes
339
Rating
5
P
PrintablesBasementLAB

Double U-type Pipe Clamp - Morsetto per tubi a doppia U - Metric/Imperial

Double U-type Pipe Clamp - Morsetto per tubi a doppia U - Metric/Imperial For fast installation of RNC, flexible & rigid conduit Easy to print, optimized filament usage Sizes available: Metric Ø 7mm Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 8/20mm…

Downloads
834
Likes
275
Rating
5
P
PrintablesJack

Ball-Socket joint tubing

ball socket joints to chain ↦ joint hose (don't use PLA as it will creep and get loose over time)

Downloads
789
Likes
222
Rating
4.67
P
PrintablesBonkers91

Elegoo Centauri Carbon JesusFreak Riser Panel for PTFE Tubing

I have seen this kind of tubing on many other raisers, and also one remix from JesusFreak's, but not in a proper manner to suit the dedication JesusFreak put in giving us this great Files. So I made one. One file is just optics, since…

Downloads
768
Likes
79
Rating
5
P
PrintablesBasementLAB

Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees - Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi

Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi Pipe dimensions in mm/inches: Ø20, Ø25, Ø30, Ø35, Ø40,…

Downloads
628
Likes
134
Rating
0
P
PrintablesHelixios

Remix - PTFE Secure Fitting added - PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor (with Clip)

Thank you Marko Borsic for the original design and Boris Cvjetkovic for the remix with the clip. It worked great for me but sometimes the 6mm Bowden tube could pull out with little pressure when slightly moving my polymaker filament box.…

Downloads
613
Likes
74
Rating
5
P
PrintablesMax

Vacuum hose to tubing adapters for all common sizes

Barbed tube fittings for splitting and connecting multiple different sized soft tubing together. Has Barbs to give a secure fit on the hose. Designed to need minimal support. Print standing up with larger end on the bed. Brim might be…

Downloads
578
Likes
123
Rating
0
P
PrintablesLine Arc Line

New Angled Coupler for PTFE Tubing [PC4-M10]

I redesigned my 40° coupler from the ground up! The Fusion360 design is now more parametric, so if you want to mess with the angle, get the source here! https://a360.co/2BwCLdH It's also shorter, and has a smaller footprint in general. It…

Downloads
570
Likes
148
Rating
5
P
PrintablesDSt

TPU Clip for 2-4 mm cables and PTFE tubing

This flexible clip made of TPU is suitable for cables and tubes in the size of 2 - 4 mm! Also for the PTFE tube on the 3D printer! Different sizes with 2 - 6 holes. Print settings: Material: TPU Filling: 15 Support: No Layer height: 0,2mm

Downloads
557
Likes
318
Rating
4.86
P
PrintablesArklan

Almost fully printable Ball Vise - no screws need, just the silicon tubing.

While the original Ball vise is fine for those with a selection of hardware on hand, that's not me. So instead of buying a bunch of bolts and such, I modified the files so everything can be printed, except, of course, the silicon tubing.…

Downloads
508
Likes
251
Rating
4.33
P
PrintablesDropoff510

sim rig tubing version

hi here is my sim rig i made including the fusion file for the drawings

Downloads
497
Likes
21
Rating
0
P
PrintablesHemi345

3/4" PEX tubing hanger / clamp

I installed some 3/4" PEX-a tubing for a new basement bathroom and wet bar. I wanted an easy way to identify the hot and cold water lines while using white Pex and keep the tubes nice and parallel. Yeah, I could have just written "Hot"…

Downloads
461
Likes
78
Rating
5
P
PrintablesJoe the Builder

Qidi Box Clip Set PTFE tubing and Clable Managemen for the Qid Box

these are used to keep the PTFE tubing flat and close together to minimize the are behind the printer, the 25 mm are used closet to the hub or expansion adapter. helps to maintain a gradual sweep of the tubing to remove any binding or…

Downloads
444
Likes
62
Rating
5
P
Printablesjerzone

Square Tubing Connectors

I needed a few changes to the original: tapered pipe protrusion and a way to offset an "endstop" from the corner. I'm pretty new to OpenSCAD so there's probably room for improvement, but it was a fun learning process. The protrusion is…

Downloads
424
Likes
45
Rating
5
P
PrintablesAyersWV

1/2" PEX tubing hanger / clamp

This is a remix of 3/4" to 1/2" so I can mount my 1/2" to the wall with a screw. Print Settings Supports: No Resolution: 0.20 Infill: 15% adaptive cubic Filament: PLA, PETG, etc.

Downloads
412
Likes
39
Rating
5
P
PrintablesJmonserud

MMU2s PTFE Tubing Organizer Clip

You have upgraded your Prusa i3 MK3s+ with the MMU2s upgrade and selected drying solution with varying degrees of PTFE tubing guides for filament. Now you need a hardware free efficient way to organize the 5 channels of filament in your…

Downloads
408
Likes
43
Rating
4.4
P
Printables3D-Muc

Shrink Tubing Cutter - 10-25mm

Heat Shrink Tubing Cutter For cutting 10 / 15 / 20 / 25 mm long pieces. The blade used is a carpet knife. Grind the blade at the sharp tips around so as not to injure yourself. You will find 2 versions for different thickness of the…

Downloads
406
Likes
42
Rating
4.5
P
Printablesnpopson

Plug for 1/4" (6mm) ID Tubing

Settings: 100% infill. 0.16 layer height. Material: Recommend ASA or ABS, smoothed with acetone vapour for best sealing capability. Next best option is PETG. Then PLA. Usage: You may want to use a heat gun to soften the tubing before…

Downloads
392
Likes
16
Rating
0
P
PrintablesFrittenpit

Tube Bending Kit for 16mm OD Acrylic or PETG Hard Tubing

If you want to bend acrylic tubing, i recomment to print it in ASA/ABS for better heat resistance. For acrylics, i had the best results with the 35mm bend radius and round walls, but 30mm works, if you heat the acrylic well. If you feel…

Downloads
385
Likes
51
Rating
0
P
Printablesevrydayzawrkday

Auto Top Off (ATO) and Pump Tubing Holder

If you are running an auto top off, and also doing a single dose pump for your tank (for something like “All for Reef”) then this is your print. I have a Fluval EVO 13.5 that needed a way to hold both of those tubes securely while using…

Downloads
384
Likes
27
Rating
5
P
PrintablesBubonic_Bullet
Downloads
380
Likes
10
Rating
0
P
Printablesstugpanzer

EMT (Electrical Metallic Tubing) Conduit 3/4" Fittings

I originally designed these to use for building a small snow cab for my small garden tractor but decided to go another route with that! These are various fittings for EMT Conduit (¾"). Use your imagination to make all sorts of things such…

Downloads
357
Likes
48
Rating
5
P
PrintablesSmaiLee

Growbox clip cable/tubing/wires

I designed a clip which is pretty tight fit to 16mm poles on a Growtent. The clip itself is slightly bendable so depending on what material you print it you can easily fit in 10mm cables/tubes in it.

Downloads
357
Likes
58
Rating
5
P
Printablesterageek

Customizable pinch valve for flexible tubing

Use this valve to control or shut off the flow in flexible tubing, like air tubes used with aquariums. Included STLs are sized for some “standard” aquarium air tubing that I had laying around. Customize in OpenScad to resize as you see…

Downloads
352
Likes
56
Rating
5
P
PrintablesBrute71

Printed CNC Brutus (Metric Tubing)

I want to thank you for choosing to embark on this journey! I started this project as an experiment to see how far you can take a mainly 3D printed CNC router with inexpensive components, the result is hopefully what you will soon enjoy!…

Downloads
331
Likes
51
Rating
0
P
PrintablesStudio Mechanik

Corner Connector x3 for PCV Tubing

Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV

Downloads
312
Likes
152
Rating
0
P
PrintablesJP

3/4'' Pex Tubing Hanger

Print Settings: Printer Brand, Prusa Printer, I3 mk3s Resolution, 0.2mm Infill, 15% Perimeters, 3 Supports, No Filament, Petg Notes: Snap it over the pipe and use two #8 construction screws to secure it to the framing. Works best if…

Downloads
307
Likes
28
Rating
0
P
PrintablesDr_Froggy_rD

ribbed tubing for makin a tpu based spring

I made this part for a worcolleague which goot a pcb holder 3d printed - he was misssing a spring material to put on one side- I create this part sadly I cannot recall which model he used. it was printed in tpu on a micro 3d printer- I…

Downloads
306
Likes
11
Rating
0
P
PrintablesBasementLAB

Pipe fittings Clamp/Clip Ø20mm Hexagonal - Clips per fissaggio tubi Ø20mm esagonale

Pipe fittings Clamp/Clip Ø20mm Hexagonal - Clips per fissaggio tubi Ø20mm esagonale Standard Elbow 30 degree Elbow 45 degree Elbow 60 degree Elbow 90 degree 90 degree T-Piece (added) Resize to adjust dimension All our designs are free to…

Downloads
291
Likes
87
Rating
5
P
PrintablesNoaah

Tubing Passthrough

Tubing Drybox Passthrough Simple filament passthrough for dryboxes, designed in Fusion 360 and printed in PETG. Provides secure, moisture-protected filament feeding. Optimized for smooth filament handling. (ideal distance is 2cm)

Downloads
270
Likes
38
Rating
0
P
Printablespeha68.pl

Aquarium tubing holder

Holder for aquarium tubes 4/6mm. Glass thickness 6mm.

Downloads
254
Likes
73
Rating
0

Anycubic M7 Vent adaptor, for 50mm tubing

An angled exhaust port for your Anycubic M7 & M7 Pro. To fit a 50mm duct or tube.

Downloads
249
Likes
15
Rating
5
P
PrintablesStorm

1/4 in Tubing Mounting Clips

I have a ¼ in tubing running from the reverse osmosis filter under the sink to the refrigerator to feed water to icemaker. It is hot glued to exposed particle board a few inches off the floor, right under the base cabinets bottoms and the…

Downloads
249
Likes
14
Rating
5
P
PrintablesCameron

PTFE Tubing Clip - 2, 3 and 4 Tubes

Print settings: 0.20mm QUALITY Filament: PETG 20% infill

Downloads
223
Likes
32
Rating
5
P
Printablesrpuckett

PC Water Cooling Mock-up Tubing

I did my first custom water cooled PC recently and I had the idea to print dummy tubing to test out how I would do the runs. The dummy tubing pieces are of known length which really helps when setting up your bends for the real tubing.…

Downloads
213
Likes
54
Rating
5
P
Printablesjuh

Pneumatic fitting with M5 thread for 4mm tubing

Fully functional replacement for metal fittings, tested up to ca. 1 bar. Comes in four versions, barbed, straight-long, straight-short, and 90° angular. Use with 6x1.5mm or 5x1mm O-rings. Can be tightened with a 7mm wrench, but don't pull…

Downloads
211
Likes
29
Rating
0
P
PrintablesAndrey Orlov

Square Tubing Connectors - Complete Set

This is an original design from the author. This is not my design. I use these connectors often. Very comfortably. On the thingiverse website. It’s hard to find everything, I uploaded these files to this site so as not to lose them. This…

Downloads
210
Likes
25
Rating
0
P
Printablesthatgerhard

End cap for hollow square tubing (25.5mm X 25.5mm)

End cap for hollow square tubing (25.5mm X 25.5mm)

Downloads
208
Likes
14
Rating
5
P
PrintablesStudio Mechanik

Corner Connector x3 for PCV Tubing

Corner Connector x3 for PCV Tubing Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV

Downloads
203
Likes
89
Rating
0
P
PrintablesSteveS42

Tube Cutter for water filter tubing (3/8", 1/4", & PTFE)

This cutter is easy to print, easy to assemble, and easy to use. It cuts 3 sizes of tubing: 3/8” (9.525mm) used in RO water systems ¼” (6.35mm) used in RO water systems PTFE (4mm) Parts Needed 1 single edged razor blade 1 M3x20 screw 1 M3…

Downloads
202
Likes
39
Rating
5
P
PrintablesNunuz57

Sculpfun S9 Silicone Tubing clips

Silicone Tubing clips for Sculpfun S9 Clips are designed for silicone tubing 4mm inner diameter and 6mm outer diameter ( https://amz.run/5CFO ) Print Settings Printer: Qidi X-Max Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill:…

Downloads
193
Likes
15
Rating
5
P
PrintablesDot Dot Dash

Dog agility jump parts 1" PVC tubing

Cut 8 pcs 12" long for feet Cut 2 pcs 36" long for posts. Cut 56" pieces for the jump bar. I used hot glue during assembly as well.

Downloads
188
Likes
36
Rating
5
P
PrintablesMade New 3D

Inline Hose / Tubing Water Filter

I designed this guy to polish the water in my cold plunge. The threads on the end fit a standard garden hose. I stuffed mine with filter floss, and there are included mesh filters as well. If you like the design and have a more particular…

Downloads
188
Likes
14
Rating
0
P
PrintablesHallstein

Wallmount for tubing (brewtools / gardena)

This is a wallmount made for holding brewtools and gardena tubing. The top five slots holds Brewtools 16x25mm silicone tubing: The bottom three slots holds normal gardena tubing with 16.5-17mm OD Screws to the wall with two 4x20mm pan…

Downloads
187
Likes
59
Rating
5
P
Printablescclontz

1.5" square tube end cap for thin wall tubing

This is an endcap that fits in 1.5" square tube.

Downloads
186
Likes
7
Rating
0
P
PrintablesRyan

Heat Shrink Tubing Cutter

Heat shrink tubing cutter jig for the work bench. It takes a standard box cutter blade, secured with 2x 4-40 screws. The swing arm is secured with a ¼-20 BHCS. Threads are not modeled in, they are to be tapped. Markings on outfeed are ¼"…

Downloads
183
Likes
19
Rating
5
P
PrintablesSpam N' Rice

Creator 5 Pro Extruder Vent Filter with PTFE tubing slip fit connection

Creator 5 Pro Extruder Vent Filter with PTFE tubing slip fit connection. The extruder vent actually emits a lot of VOCs and particulates. This happens because the chamber recirculation filter fan and the chamber intake fan blow at the…

Downloads
180
Likes
45
Rating
5
P
PrintablesJer

Wall Cable Holder for 1 x 1/4 In Tubing or Coax cable

Also introduced a new variant - with or without tabs to hold the cable/tube in place. The countersunk screw hole is designed to fit standard #8/#9 drywall/construction screws. Original 2-cable version is here: Wall Cable Holder for 2 x…

Downloads
180
Likes
29
Rating
0
P
Printablesavolkov

Parametric Tubing Drill Jig

I'm working on a project where I need to install fasteners through some aluminium tubing and it so happens this contest has coincided with the project. All demonstration photos are with ¾ inch aluminium tube, 11/64 drill and M4 bolt,…

Downloads
179
Likes
106
Rating
0
P
PrintablesStudio Mechanik

Corner Connector x4 for PCV Tubing

Corner x4 Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV

Downloads
173
Likes
70
Rating
0

LRTee: Last Resort 22mm Ventilator Tubing Splitter

Patients with COVID-19 in serious or critical condition often require assisted breathing via ventilator. As the number of patients in need of ventilators grows (exponentially in many densely populated regions), there are not adequate…

Downloads
173
Likes
7
Rating
0
P
Printablesppaukstelis

Adjustable sprinkler nozzle for drip irrigation tubing

This is a simple sprinkler head that fits into 1/4" drip irrigation tubing. It is distance adjustable using a 4-40 (or similar size) screw threaded through one of the holes in the top of the deflector piece. Printed in ABS, as this will…

Downloads
171
Likes
26
Rating
0
P
PrintablesStudio Mechanik

Corner Connector x6 for PCV Tubing for Whoop Drone Racing

Corner x6 Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV tube (either scaled print or finishing is required).

Downloads
170
Likes
80
Rating
0
P
Printableskjs

PTFE tubing connector - Remix

After using the original now for a while I ran into an issue. Despite the PTFE tubing being very tight in the coupler parts the rattling of my printer managed to slightly pull the tube ends apart. Just enough that feeding in a filament…

Downloads
170
Likes
19
Rating
5
P
Printablescmh

Abrasive pipe reamer for round tubing

Abrasive pipe reamer for use with round tubes, especially carbon fiber. Works for diameters of tubing found on bicycles (appx 15-40mm) to create a 45 degree chamfer. Print the three pieces, use the templates to mark your sandpaper, (I…

Downloads
158
Likes
31
Rating
0
P
PrintablesPhil Caruso

PTFE Tubing Straightener (4 mm)

I created these PTFE Tubing Straighteners to help straighten out PTFE tubing (4 mm outside diameter) that has been coiled up since manufacture and wants to continue to be coiled up tightly when you need it to be straight (or at least…

Downloads
158
Likes
63
Rating
5
P
PrintablesHuỳnH HnýuH

CleanCut - Tubing and pipette tip cutter

Tubing cutter, specifically designed to cut small plastic tubes or straws. The sharp blade allows for clean and precise cuts, which is essential for ensuring proper fit and functionality in applications such as microfluidic tubing,…

Downloads
157
Likes
63
Rating
5
P
PrintablesPeter H

END CAP FOR 20MM TUBING 16mm ID

If you have a pipe or tube with a 20mm OD and a16mm ID, this will work for you! I'd recommend printing in PETG but I've used PLA in similar situations and had no problems, but it's a hammer fit because of those silly little ribs that have…

Downloads
146
Likes
14
Rating
4.5
P
Printablesbmccarthy321

PTFE Tubing Coupler for MMU2

So in making my Lack Enclosure, I cut my PTFE tubes too short. I had to get a few couplers and I tied them back to back and placed them in the middle so it would extend and get my tubes down to my lower cabinet. The filament catches a…

Downloads
145
Likes
30
Rating
5
P
PrintablesAyersWV

1/2" PEX tubing hanger / clamp with 2 screw holes

This is a remix of 1/2" mount with a second mounting hole. Print Settings Supports: No Resolution: 0.20 Infill: 15% adaptive cubic Filament: PLA, PETG, etc.

Downloads
143
Likes
7
Rating
5
P
PrintablesZechimaera

Hegner Multicut flexible air tubing

I needed an efficient and precise way of blowing the sawdust from the cut-outs in my scroll saw, as the PVC tube supplied as standard didn't work at all. I've seen this type of articulated blower on another machine, but it's a very…

Downloads
140
Likes
19
Rating
0
P
PrintablesPlexi

Replacement Plastic Chair feet for Square Metal Tubing

These chair feet are designed to fit chairs legs that are made with 16 mm inside diameter square tubing. I've included three styles of feet. The foot with the rounded end will fit a leg at any angle. Each of the feet has a round recess…

Downloads
138
Likes
13
Rating
0
P
Printablesdavid.h61

1/4" Polyethelene Tubing Brackets

Uses #6 x ¾ screws to hold onto wood surface. There is also a recession on the back side to use hot glue to attach to a concrete wall.

Downloads
138
Likes
13
Rating
5
P
Printablesmethylene67

Distribution tubing holder for micro drip irrigation

Will have to use supports, use ASA or PETG material.

Downloads
136
Likes
18
Rating
5
P
PrintablesBert

Template for cutting and bending rectangular tubing

Model generates a template that you can 3D print to lay out cuts for bending a rectangular tube. Rectangular tube will have a nice outside radius and is guaranteed to fit together tightly for easy welding. Fusion 360 model is fully…

Downloads
135
Likes
27
Rating
0
P
Printabless1ugh34d

Quick 1/4 Tubing clip, Coax, 4 gauge wire mount, hidden fastener

Installing RO systems and needed some clips to have a bag of to hold down wires and ¼ tubing. Nothing I found had the fastner hidden and an easy way to remove the clipped wire/tube without removing the screw. After a few changes the…

Downloads
135
Likes
14
Rating
5
P
PrintablesStudio Mechanik

Corner Connector x5 for PCV Tubing

Corner x5 Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV tube (either scaled print or finishing is required).

Downloads
131
Likes
51
Rating
0
P
PrintablesDoak

Filament Passthrough for PTFE tubing

A simple passthrough for a PTFE tube into a printer enclosure, using PC4-M10 pneumatic fittings to keep the tubing from being yanked into or out of the enclosure.

Downloads
131
Likes
15
Rating
0
P
Printablesicase81

14mm OD Hard Tubing Bend Mandrel

I didn't want to spend $40+ on a bending mandrel to use for 4 tubes one time, so I drew this up quickly. There are bends for 90 and 45 degrees, as I figured 180 wasn't that commong anyway. It's set for 14mm OD tubing. Smaller should work…

Downloads
130
Likes
14
Rating
5
P
PrintablesMatthieu

Square tubing end cap 40mm thickness of 3mm

This is a simple end cap for square metal tubing of 40mm by 40mm with a thickness of 3mm. The shape follows the 8mm radius of the corners. Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: No Supports: No…

Downloads
130
Likes
6
Rating
5
P
Printablesdmcmd

Bambu AMS Filament Buffer Tubing Holder

I was having problems with my Bambu X1 Carbon loading filament from the AMS into the printer. The filament was getting snagged upon entering the filament buffer on the back of the machine and I was getting filament loading errors. This…

Downloads
130
Likes
10
Rating
5
P
Printablesbust4rhymes

End cap for hollow square tubing 50x25

So i remixed this to fit 50 x 25 mm aluminum tubing. I dont have Fusion so used PrusaSlicer to cut and resize the part. The fit is perfect for my used case so it might help someone else :)

Downloads
126
Likes
1
Rating
0
P
PrintablesMichal Houdek

Horse Jump Tubing Parametrisable

Parametrisable tubbing for horse jumps. You can change lenght, diameter, cutting height. Designed with cutting for better pritability. Brim recommended. For example for https://www.thingiverse.com/thing:252205…

Downloads
125
Likes
34
Rating
0

Microdrip spike connector 4mm drip tube to main tubing

Create small hole to the main tubbing with nail and than push this connector to it. Compatible with rain bird irigattion tubbing. Print flat with 100% infill and support

Downloads
125
Likes
19
Rating
0
P
PrintablesFrittenpit

Simple acrylic/petg 16mm hard tubing saw guide

Can be used for sawing 16mm OD acrylic tubing

Downloads
124
Likes
18
Rating
0
P
PrintablesFrankyD80

Tubi der Zahnpastatubenquetscher - tubesqeezer

Zum ausquetschen der Tuben für z.B. Zahnpaste oder Creme.

Downloads
124
Likes
15
Rating
5
P
PrintablesSteveS42

Tube Cutter for water filter tubing (3/8", 1/4", & PTFE)

This cutter is easy to print, easy to assemble, and easy to use. It cuts 3 sizes of tubing: 3/8” (9.525mm) used in RO water systems ¼” (6.35mm) used in RO water systems PTFE (4mm) Parts Needed 1 single edged razor blade 1 M3x20 screw 1 M3…

Downloads
119
Likes
28
Rating
5
P
Printablesparanoid

MPCNC Primo F 25mm Tubing Plugs

mpcnc-primo-f-tubing-plug.stl - plugs into the ends of side rails (needs 8) mpcnc-primo-f-tubing-plug-hole.stl - allows to lay cables through if you put your cable through gantry rails (needs 4) Keep your fingers safe (or do not buy the…

Downloads
119
Likes
16
Rating
0
P
PrintablesAndy B

Endcap for 1" square tubing

Endcap for 1" square tube Friction fit

Downloads
117
Likes
8
Rating
0
P
PrintablesNamida Verasche

ECAS04 adapters for Flashforge AD5X IFS tubing

I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…

Downloads
116
Likes
21
Rating
5
P
PrintablesImissHurley

Dual Hose Clamp for 16mm (5/8 inch) tubing

Dual Hose Clamp for 16mm (5/8 inch) tubing. Used for watercooling loops. You will also need an M4 x 12mm or 16mm as well as a M4 x 4mm or 6mm threaded insert.

Downloads
114
Likes
12
Rating
0
P
PrintablesBubsBuilds

Y Tube Splitter for 3/16"ID soft tubing

More of my fluid management designs I've made a number of these little tees for various test builds when I didn't have and/or forgot to order real tees (or I guess Ys in this case, but I tend to call all two-way splitters 'tees' I guess…

Downloads
114
Likes
20
Rating
0
P
PrintablesJBJul

CPAP Tubing Cleaning system holder

Support pour nettoyage ou le séchage d'un tube CPAP. Besoin deux 2 ou 3 vis 4MM x 30MM

Downloads
113
Likes
32
Rating
4.5
P
PrintablesMandarkHaHa

Floating feeder for tubifex worms

I didn't like the cone shaped feeders on the market so I designed and printed my own. Print settings: 0.4 or 0.6 nozzle PLA or whatever you like to print with whatever layer height you like 2 perimeters no supports Add a height range…

Downloads
112
Likes
25
Rating
0
P
PrintablesStudio Mechanik

Corner Connector x3 - 45 deg for PCV Tubing

Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV

Downloads
110
Likes
41
Rating
0
P
PrintablesStudio Mechanik

Corner Connector x2 - 45 deg for PCV Tubing

Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV

Downloads
109
Likes
37
Rating
0
P
PrintablesSvenS

tubing tower for ants

I have little space on my desk but want to give my ants some travel distance between nest and arena like they would have in the wild. Solution: winding up a length of tubing into a spiral. In addition, I had trouble connecting parts with…

Downloads
108
Likes
23
Rating
3