95 models
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This mount is part of a 19-inch modular rack mount system I designed. You can mix and match the modules with other mounts. Take a look at my models here…
An unofficial 10-inch rack mount for the Ubiquiti Unifi UCG-Ultra | UCG-Max | UXG-Max. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Updates 26 Nov 2024: The V2 of this rack mount…
A 10-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This model comes in 4 variants: With front cutout for power cable routing With holes for M3 thread inserts. → UCG-Fiber 10i RM for Thread Inserts.stl With holes for…
A modular 19-inch rack mount for the Unifi UCG-Ultra, UXG-Max, and UCG-Max lineup. OBS.: The UCG-Max processor reaches 75~ 90 degrees Celsius for normal use, and the bottom can get REALLY HOT . So use filaments with higher temperature…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the…
Rackmount for UniFi Gateway Max (UXG-Max) . As the dimensions are identical, it will also work for the UniFi Cloud Gateway Ultra (UCG-Ultra) and the UniFi Cloud Gateway Max, but you won't see the display. Ports facing front, works for…
An unofficial wall mount for the Ubiquiti Unifi Cloud Gateway Ultra. It can be either screwed in place with two M4 screws or attached with a double-sided tape. It works for the UCG-Ultra | UCG-Max | UXG-Max. I've also shared the .step…
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…
A 19" rackmount for the Ubiquiti UCG-Ultra. Parts held together with screw and nut, no glue required Ignore my poor print quality. Right side appears to be slightly taller than the left in my photos (it was - my cock-up) fixed in the…
This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 and X-ONU-SFPP modules. You can find pre-soldered DIY fan + power module kits here: https://exen.sh/products/diy-kit-ucgf-cooler
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
Moved some parts from @marsf_1338819 and removed fillets to fit 1 more keystone Keystone are on the Right, but could make a Left version if requested. Should fit in any 10 inch rack that has at least 213mm inside spacing
My version ended up a bit tight. Maybe it's because of ASA shrinking. Maybe because of the slight warp. But maybe it's just a bit tight. The screw holes are for M4 screws. I decided to mount the device with it's “top” surface towards the…
Remixed towilab's design to allow for access of the UCG max's SSD port. Made the L-portion of the ‘clip’ on the right side a bit more aggressive while removing the left side one entirely, allowing super secure retention despite only…
buy @Mauker a coffee ! https://ko-fi.com/A623L7G ☕ added versions with zero and one keystone. added version with vents also see my version with PoE adapter mount: https://www.printables.com/model/1215636
Created from scratch to allow me to make my own rack mount. I wanted to leave gaps for the vent holes and potentially the storage bay too. I've taken all the measurements myself on a UCG-Max and while I've made every effort to get them…
Loved the original but when printed in White ASA at 20% infil the 4 end cups broke off super easily :o( In this remix they don't Also printed it at 40% infil with 100% infil between 9mm & 16mm - using Orcaslicer No supports Added 2 other…
Larger spacing in the bottom so the device can be mounted screen top / ports bottom. Printed in PETG, holds the device really well.
Designed for use with the UCG-Fiber Rack Mount by @Mauker. This panel provides keystone jacks for the 1 x 10 Gb RJ45 WAN port (isolated on one side by the power supply bracket) and 4 keystone jacks for the 4 x 2.5 Gb RJ45 LAN ports on the…
A 10-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the keystone slots and…
NOTE: The UCG-Fiber is a tight fit inside a 10 inch rack. Before printing, please make sure there's at least 216mm space between your rack rails, otherwise this bracket won't fit. I tried designing this so it doesn't use up too much…
Engelsk: Mount for Ubiquiti Cloud Gateway Ultra (Unifi UCG Ultra) This mount is specifically designed to securely hold your Ubiquiti Cloud Gateway Ultra (also known as the Unifi UCG Ultra) in a practical and efficient way. With this…
EDIT Jun 2025: Updated models 9 Jun 2025. Improved the power cable cutout and increased the rigidity of the models in the mid section where they join and across the PSU holder. EDIT 2: Nov 2025. I am not able to do more mods on this. A…
printed with Sunlu's PETG 230/70, no support
Made some changes so it fits a 19 inch rack. adapted the mounts from @Mauker Parts 3x M5 screws 3x M5 hex nuts. thx to @FruitieX 26/3 Model - Removed the small front cutout in the front plate, and removed the honeycombstructure on the…
No curveballs on print settings for this one. Any layer height should work, but I print in .2mm. This model does require supports for the flanges that hold the UCG down. I use organic supports that I painted on within Prusaslicer. .F3d…
Neatly mount your AC power adapter brick for the UCG Fiber with this 2U printed part. Simply slot the power brick in and mount to the rack. Takes up 2U of mounting space, but keep in mind you'll need additional space underneath for the AC…
The UCG Fiber shares the same footprint but with an elongated length. Model has been widened with more mount holes added as well as a cable routing channel. An f3d file has been included to adjust the mounting position if required.
A ‘quick and dirty’ remix to add some vents for the UCG-Fiber unit after reading some reports that the unit may get quite hot otherwise. After printing mine, I'd repositioned the vents slightly toward the rear to better align everything.…
Better version of the other one out there that I initially remixed and had a lot of pain with. Organic supports recommended.
Added keystone mounts https://www.printables.com/model/537480-parametric-keystone-connector/files
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for UniFi UXG Max / UCG Ultra / UCG Max This bracket is designed specifically for the UniFi UXG Max / UCG Ultra / UCG Max gateway, offering a clean and…
Minimalist version of the UCG-Ultra wall mount You may need to drill out the screw holes if you use large screws All my designs are provided for free, but feel free to support me so I can create and share more. Any amount of support is…
These are three rackmount trays to hold my homelab components. 2x BeeLink S12 Minis 1x UCG-Ultra 1x FlexMini switch I modeled the front plate and trays together and split them in the slicer. The front plates will barely fit a standard i3…
UCG-Fiber stand that raises the device a bit for better airflow.
Best printed in PETG. Use 6+ perimeters to add strength to the corners and clips Tolerances are really tight, fit fine for me, but you may need to scale up by a couple of %. I've also made a wallmount for the power brick. If your in the…
Fits either Ubiquiti Cloud Gateway Max or Ultra, they are the same dimensions Best printed in PETG. Use 5+ perimeters to add strength to the corners and clips Tolerances are really tight, fit fine for me, but you may need to scale up by a…
This is a remix of this nice model. There are 2 models 1. 3 keystone 2. 4 keystone Thx Mauker
A form-fitting vertical stand for the Unifi Cloud Gateway (UCG) Ultra router. It is designed to allow cool air flow to the router's underbelly, which reduces operating temperature, and gain perk of a smaller desk profile. Stand dimensions…
Modified FruitieX's model. Removed superfluous hex patterns that make it hard to print and block the SSD port. So now the SSD port accessible, and you can have the fiber face whatever direction you want instead of just one. Also enlarged…
My UCG-Max seemed to be running quite warm on the bottom when sitting horizontally. I designed this vertical stand to improve airflow. The small gap between the bottom of the gateway and the stand is meant to accommodate a small piece of…
Wall mount a UniFi UCG Ultra router, fits the same screw holes as the USG if replacing.
This model is a tight-ish fit, if you want it to have a tiny bit of play on the device, you might want to increase the size by a few percent. printing oriantation: standing up on the backside (with the lips). Recommanded print settings: -…
A remix of this great model from Mauker moved the mount to the side, and added a few extra keystone slots, if you need the Reinforced Modular Rack Mount Blank, it can be found here Parts 3x M5 screws 3x M5 hex nuts Thx Mauker
A remix of Unifi UCG-Fiber 10-inch Rack Mount by @Mauker. It's a version cut down into pieces to print without support
My attempt to make a rack mount for the UCG Ultra / Max routers. it fits with and without the little feet you get with the router, but the router slides easy if you don't have them on! 2 semi good fitting keystone jacks on each side, if…
Made some small adjustments, to fit my needs.
[UPDATE 15-12-2025] : I'm now unsure where I got the original 3-keystone model from... My initial remix is based on Mauker's design with an open front and 3-keystones, but I actually like Andreq's version with a closed front better. I've…
A modular 19-inch rack mount for the Unifi UCG-Max PSU. Designed to hold UCG-Max PSU without needing additional screws. Features cable management compartment and 5x keystone mounts. 4 Variants of Design: Keystone Left Keystone Right Blank…
A Remix of this great model Unifi UCG-Fiber 10-inch Rack Mount. Moved the polygon to the front + it now fits a 19" The screw and hex connectors is adapted from Mauker. The PSU mount is based upon this model from @SuperPilot_90212. I…
Retention backplate for the UCG-Fiber PSU rackmount found at CAD on OnShape
Modeled in Fusion. Designed to be printed face down. In this mount the left and right files are different, you need both because of the shape of the UCG or UXG device I didn't think to take a picture of it when I printed it but it fit…
The belly of the Unifi Cloud Gateway (UCG) Ultra router, on normal days, feels warm to the touch, and rapidly hot when network stressed. It just sits flat on the table, without airflow, and stews. This basic desk stand, designed to let…
buy @Mauker a coffee ! https://ko-fi.com/A623L7G
A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling. Can be fully printed on a Prusa Mini or other 180mm^3 printer. For details on how to fit the prints on small pinters, see…
The back plate file included with the original model package doesn't allow for excessively tall SFP modules such as the WAS-110. I've removed the top portion of the back plate to give enough clearance for the WAS-110's large heatsink (and…
wall mount for UCG Fiber power supply, with recessed screw holes
A Remix of this great model Unifi UCG-Fiber 10-inch Rack Mount. Moved the polygon to the front + added a second model with cut-out for the SSD. Versions 1. UCG-Fiber 10-inch Rack Mount 2. UCG-Fiber 10-inch Rack Mount - cutout for SSD tray…
A Remix of this great model Unifi UCG-Fiber 10-inch Rack Mount. Moved the polygon to the front + added a second model with cut-out for the SSD. + can now be center mounted in a 19" rack. Versions 1. UCG-Fiber 19-inch Rack Mount 2.…
I made these risers to raise the UCG Max 25mm off the desk to improve temps and have seen about a 3-4C drop on average. These are designed to fit over the existing rubber feet. Just print four and use a small dab of hot glue or something…
Mount for Unifi Cloud Gateway Ultra (UCG), designed for SKÅDIS.
As for my Unifi PoE-injector I want to get rid of as much cableclutter as possible in my 10-inch rack so I designed this 2U 10" rackmount for the UCG-Max' powerbrick. I could have made it as a 1U, but I'd rather have the extra breathing…
Mount the power supply of a UCG Fiber onto openGrid, via openConnect I printed it with support, auto/snug/top Z distance : 0.3mm
Rack mount Gateway Fiber/Cloud Gateway Fiber (UXG-Fiber/UCG-Fiber) for 19 inches rack. Due to the device is too wide the mounts are not detachable. It is exactly 9.5 inches wide so it is possible to use with another device in the same…
Updated as per request from andku85 - See Modded UCG-Ultra model UCG-Ultra, Mini Flex holder andhorizontal AP holder All In One The one I printed in the photos look a little like a pop up droid, so I'm calling it ‘U3P-AI1’ Got a little…
Work in Progress - not printed yet If you have morethan 1 Min-Flex you can print another tray from one of the linked models UCG-Ultra & Mini Flex holder
Remix to make printing quicker and easier Model has been split into 2 seperate parts which can be printed at the same time with far less supports. Post print can be glued together or left to sit in place via gravity Printed in ASA, not…
I created an easy printed wall mount for the Unifi Cloud Gateway Fibre's power brick. It is designed so that the power brick can slide in from the top. Also there are two types of the model, one with a plain backplate and one with holes…
UCG-Ultra mount for Blinkinlabs's 19cm network rack. Uses four M3 4.6mm diameter heat inserts on the back and a back plate that can be downloaded from the original model by n3rding here:…
JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option which i used before and be able to replace my empty right side. There are more options out there to combine it to. Use 2 M3 inserts and 2 M3 screws to…
This is a snap in insert that can manage cat cables for those who don't like adding unnecessary patch cables and jacks..
I wanted the rack mount ears to come out at a right angle so that I could utilize the horizontal ears in my rack and not take up a valuable U space
I remixed the Skadis Unifi Fiber mount to openGrif via openConnect. I've added four versions, to get four directions, when using the integrated power cable channel. I printed it with support, auto/snug/top Z distance : 0.3mm The 3mf has a…
Skadis version of the UCG Fiber PSU mount
A quick remix of the back plate from @mauker cloud gateway rack mount to mount the power supply. My print settings (Core One) PETG PrusaSlicer print profile “0.25mm STRUCTURAL” 15% Infill, Gyroid Required parts 2 Cable ties
A printable replacement for the UniFi M.2 SSD Tray (UACC-SSD-Tray) Ubiquiti uses the same tray across UCG Max/Fiber and UNAS Pro 4/Pro 8/UNAS 4, so this should fit those bays too - tested in a UNAS Pro 4 (SSD detected). SSD SIZES 2242 /…
Excuse the color variations in the plastic
Bracket for mounting the UniFi Cloud Gateway Ultra in a DAP 2U audio panel Designed for a light press-fit, no additional hardware required.
I used a combination of M4 and M5 flat head screws to join the arms with the basket.
I made this model very quickly to be able to attach my camera to my monitor's stand. Next to the 3D-printed part I used the top of a cheap lighting stand that broke, which is to be inserted into the tube at the top. You can then put a…
Designed a small bracket to attach to the back of the UCG Fiber 10in Rack mount to help manage wires and bricks a bit better. It is affixed with 2x M3x16 SHCS. I wanted to use four ideally but unfortunately there isn't enough room and I…
This is a height-customisable riser for a Unifi Gateway Max. You can set your height to allow for cable management, heat sinks, or fans. Thank you to @davidM_46819 for his UCG model that provided the dimensions and reference for creating…
This is the rack mount for the UCG-Ultra 10" rack. Has a couple little spots on the edge for passing through cables to the front, if you want that. If someone requests it, I can also make this without those holes.
A 10 inch rack mount for a UCG-Industrial. In order to fit in the rack at all, the mounting brackets on each side must be removed. And then it just barely fits into the rack. Additionally, because of how wide and tall it is, it can't fit…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
Fits either Ubiquiti Cloud Gateway Max or Ultra, they are the same dimensions Best printed in PETG. Use 5+ perimeters to add strength to the corners and clips Tolerances are really tight, fit fine for me, but you may need to scale up by a…
I made this model very quickly to be able to attach my camera to my monitor's stand. Next to the 3D-printed part I used the top of a cheap lighting stand that broke, which is to be inserted into the tube at the top. You can then put a…
I used a combination of M4 and M5 flat head screws to join the arms with the basket.
Retention backplate for the UCG-Fiber PSU rackmount found at CAD on OnShape
A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling. Can be fully printed on a Prusa Mini or other 180mm^3 printer. For details on how to fit the prints on small pinters, see…
Snap in wall mount for Unifi UCG-ULTRA
Easy to print wall mount for the new Unifi Cloud Gateway Ultra. Print orientation is laid flat. 3 wall loops 20% infill (I prefer gyroid) 0.20mm layer height Supports required on the overhang Inspiration for this model comes from another…
This is a remake of my UCG-Ultra wall mount, to allow the unit to be mounted under a shelf whilst being in the correct orientation. My original wall mount model can be used to mount under a desk but the UCG would be upside down. Print…
![[RE-REMIX] 10-inch Rack Mount for UniFi UXG Max | UniFi UCG-Ultra | UniFi UCG-Max | 3 Keystones](https://media.printables.com/media/prints/adc6ccdc-6eff-4ddd-ac0f-4e95ccabe13a/images/9627747_37c38b0b-0449-4e4c-bd06-d9ab1999649f_1fc4f0c2-020e-40a5-b818-cb80370ed233/pxl_20250420_201749755.jpg)
![[REMIX] 10-inch Rack Mount for UniFi UXG Max | UniFi UCG-Ultra | UniFi UCG-Max w retaining screw](https://media.printables.com/media/prints/1215628/images/9122879_ee6d81c3-ef88-4d5a-ae83-562b8cf2c676_454d9de7-063b-42c7-91fd-92f32b565b2e/screenshot-2025-03-03-at-40157-pm.png)
![[RE-RE-REMIX] Unifi UCG-Max 10-inch rack mount w. 3 keystones](https://media.printables.com/media/prints/4e8e5b76-5358-4162-afff-d6768341d56b/images/11425369_783eb8fc-f79b-47e4-a416-92a39bf4af46_7eb03925-c93a-42cb-83a6-d824698c0cb9/img_4920.jpg)
![[REMIX] PoE adapter + 10-inch Rack Mount for UniFi UXG Max | UniFi UCG-Ultra | UniFi UCG-Max with PoE adapter](https://media.printables.com/media/prints/1215636/images/9122922_c7bbdb44-aa90-4fe4-ab69-296f5838989c_b9fc5ab8-5530-43e6-9350-81fcd1d0d766/screenshot-2025-03-03-at-40530-pm.png)
