UH-60 Black Hawk Helicopter Wall Art
Wall Art silhouette model of the UH-60 Black Hawk military helicopter. Adjustable size. I accept model suggestions.
- Downloads
- 797
- Likes
- 139
- Rating
- 4.83
1,869 models
Wall Art silhouette model of the UH-60 Black Hawk military helicopter. Adjustable size. I accept model suggestions.
This is an Open Source Version of the famous & expensive “Qlocktwo” clock. It works with any ESP8266 and WS2812 LEDs The entire project is meant to be made with a laser cutter. You need the following materials: 4 mm Plywood for the frame,…
Für den Mk3s gemacht, andere haben evtl einen anderen Führungsstangen-Abstand. Ein einfacher Halter, um eine Messuhr an die X-Achsen Führung zu klipsen. Die Messuhr ist auf gleicher Position wie die Nozzle und kann händisch in x Richtung…
Simple clip with which e.g. cycling gloves or other light textiles can be easily hung up. I use it to store my cycling gloves, balaclavas, etc. with the rest of my cycling clothes and hang them up to dry. Einfache Klammer, mit der z.B.…
Can be used as a keychain, car pendant or other decoration. Was by us for a colleague, where it is now hanging in the car. We printed it on the Prusa MK2 using the following settings: PLA (addnorth PLA) First layer 215° then 210° Heated…
Couldn't find any mounting brackets for the Brennenstuhl Primera-Line 10 socket powerstrip so I made a really simple one in fusion. Works better than I expected and holds really well to the underside of my desk.
UofH UH University of Houston logo with or without captured magnets. When slicing the captured magnet file be sure to set the color change just before the cavities are covered. It will be a snug fit with a 2mm magnet. Be sure to check the…
I purchased these markers some time ago; they came in a textile bag, to keep them bunched together and somewhat organized, provided you removed only one pen at a time. To remedy that I came up with this model, it requires a bit more space…
Wandhalterung für Makita 18V Akkus, aneinander reihbar / Wall mount for Makita 18V batteries, row together
Ständer für Handschuhe, dadurch lassen sich gerade die Torwarthandschuhe sehr gut trocknen und lüften!
This stealthburner model includes the mounting of a Phaetus Rapid 2 Plus UHF hotend and a CPAP for cooling, retaining the possibility of also mounting the Canbus if desired
Tento držák truhlíku s květinami na plastové okno vydrží i velký vichr a vaše truhlíky z okna nespadnou - tisk PETG na MK4, 0.4 tryska, vrstva 0.2 Držák se montuje zasunutím do originální spáry pod okením rámem anení tak nutné žádné…
Changed to fit tp-link UH720 with charging ports on the side
Halterung Brennenstuhl Premium-Line Steckdosenleiste Für die Montage werden gesamt 4Stk. M4 Gewindeeinsätze sowie Schrauben M4x6 benötigt.
I simply combined both models to better suit my needs, hope you find it useful! I hope you like the models! If you want to support my work you can Buy me a Beer !
Nur das Zifferblatt, kann mit beliebigen Uhrwerk verwendet werden. Only the dial, can be used with any movement.
printed right away no supports cura normal profile 1.30 hrs aprox. time
Every time I vacuumed my bedroom, I was annoyed by the power strips lying on the floor, so I made this holder to attach them to the bottom of the nightstands. The bracket can be screwed onto any flat surface and mounts the power strip at…
Contains both a single and double holder with rooms for the clips. Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
I used a Layer hight of 0.3mm and variable layer height to smoothe the curves.
A large and robust funnel, designed to last a long time and to feel good in the hand. This should be easily resizable for your particular needs and application. I designed this to fit into my water butt pipe system . It was created to be…
Nutze mein Modell, wenn du einen Brennenstuhl® LED-Strahler (Modell Rufus) auf ein Stativ montieren möchtest. Ich habe es für den 3000 Lumen-Strahler konstruiert. Ich vermute aber, dass es auch für die anderen Rufus-Modelle passt.…
This is hose reduction from Herkules HDS 400 belt sander to parkside dust collector Category: Parts
A twist-lock wallmount for 3T-motors/-components wireless time switches (WSTF1/5)
holder for remote lighting control
A project for a friend who wants to build a house in Kaiserstuhl Lungern. The authorities demanded an A3 format model of the surrounding area and we complied with this. Printed in Prusament PETG signal white Size: 420x297 (A3 format)…
Der eingebaute Ständer der Uhr, um sie auf ein Sideboard oder einen Schrank zu stellen hat leider einen viel zu flachen Winkel und lässt sich auch nicht einstellen. Daher habe ich diesen einfachen und schlichten Sockel entworfen, der die…
Dieser speziell entwickelte Schuhanzieher erleichtert das Anziehen von Schuhen, indem er den Hinterriemen zuverlässig in Position hält. Durch die integrierte Führung wird verhindert, dass der Riemen nach innen knickt oder nach unten…
Výztuha podstavce k teploměru pro lepší pevnost a stabilitu z PLA
A wall mount for the Marmitek Connect 621 UHD HDMI switch. Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The wall-side is made pretty beefy (18mm thick), but this fits my personal setup…
You need the rest of your coathanger and the metal part which connects the clips together with the coathanger. I am no expert on coathanger clips, but I just figured out that there are more types of them. I made two types which I had at…
This is a tray system I designed for "Catch-All Trays" contest. It was inspired by the German “Bauhaus” design style that took place about 100 years ago. My goal was to design a modular tray that could be customized and expanded to the…
Hier haben wir eine Wandhalterung für 18V Makita Akkus in der angewinkelten Version. Durch die angewinkelte Halterung lassen sich die Akkus angenehmer einlegen und entnehmen als bei den normalen geraden Versionen. Es sind Versionen für…
Minecraft truhla. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Angled battery holder for Milwaukee. In 2 versions. Version 1 for screwing with wood screws or version 2 for hexagonal screws. Angewinkelter Akkuhalter für Milwaukee In 2 Versionen verfügbar, Version 1 zum festschrauben mittels…
Für die Montage werden die beiden Schrauben vom Hotend verwendet + 1x M3x14mm und 1x M3 Mutter . Die Messurhalterung gibt es in zwei Ausführungen. Einmal mit Standard 8mm Schaftklemme sowie einmal für 3/8inch und ist somit für alle…
This is a set of files to build a 2m and 70cm moxon antenna. Inspired by David (DL1DN), known on youtube as “QRP lifestyle”, but his design was not available for DIYers. So I decided to design it from scratch and pusblish it for others.…
I was making a modification to the EVA 2.4.2 toolhead that allowed the use of a Rapido UHF hotend. I tried to find a STEP model for it online but after ~30m of searching, I couldn't find the ultra high flow (UHF) variant as a model. I…
Habe einen Akkuhalter für Makita 18V Akkus designt. Diese werden mit 2 Schrauben an die Wand geschraubt. dafür sind die 2 Öffnungern. Ich drucke für Produktivität und nicht für Design. I designed a battery holder for Makita 18V batteries.…
Die Halterung für M12 Akkus von Milwaukee ist für die Nutzung mit dem Multiconnect System von @DavidD für Multiboard gedacht. Es gibt ein Modell für die kleinen und eines für die größeren Akkus. Beide Modelle sind so ausgelegt das sie…
This construction holds 70 pcs of the (IMHO very nice but) fairly inexpensive Ohuhu acrylic marker pens that can either be ordered straight from the Ohuhu website or Amazon and similar sites. Be aware that you'll need 850+ grams of…
Introduction This is an updated version of my ExtruDraw plotter. If you have already built an ExtruDraw some of the hardware is compatible but there isn't a huge difference between them so you may not find this a big upgrade and it might…
I love the OTF Fidget Knife - only 3 Parts by uhltimate so much !! but my finger keep messing with the mechanism so here is a Closed Case remix
I suggest ordering the unassembled or Low Profile variant of beacon, or you may run into clearance issues. You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint! :) 3.17.23 Update v1.3…
Practical clip for attaching work gloves to your pants or belt. Fits belts up to 40mm wide. This keeps the gloves always handy, but doesn't get in the way of your pocket. I printed the clip in ABS. 4 walls and 20% infill gyroid. Update…
Hello Makers, i designed an easy to print shoehorn, which can be heated and shaped in the oven. LEAVE A LIKE IF YOU LIKE IT <3 Print settings: no support no brim 3 perimeters 25% triangle infill about 1,5mm thick solid layers for Bottom…
Remixed Voron printhead for Phaetus Rapido v2 UHF. Extended fan ducts to specs in Phaetus model without lowering hotend.
Wandhalterung für Werkzeugakku
Thanks to @XT4V for the printed pictures used above! I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Print this out as you would most other things. Remixed this…
Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…
Bauhaus arches, loops, and curves for your next page. Thin and lightweight, fast to print. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Notes: Optional: enable ironing for a smoother top surface Split…
Silhouette wall decoration. 16,3cm x 16,3cm sp.2mm
Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…
Gedruckt mit PLA Düse 0,4 mm Schichthöhe 0,2 Keine Stützen erforderlich
Bell UH-1N Twin Huey military helicopter Wall Art silhouette model. Adjustable size. I accept model suggestions.
Modularer Uhrenständer & Organizer – flexibel erweiterbar Ich habe einen modularen Uhrenständer konstruiert, der komplett selbst 3D-gedruckt werden kann. Das System ist flexibel aufgebaut und lässt sich passend zur eigenen Uhrensammlung…
Der 3D-gedruckte Bürostuhl für Barbie Puppen ist ein maßgeschneidertes Miniaturmöbelstück, das höchsten Spielkomfort bietet. Er verfügt über folgende Merkmale: Federung: Der Stuhl ist mit einer Miniaturfederung ausgestattet, die eine…
Decided to update the Stealthburner for the Rapido 2 UHF version. This is a remix of the amazing UHF mod by bythorthunder. (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf) This…
Modelos de prueba de la impresora ANYCUBIC con laminado CURA
Dope card holder for the SPUHR optics mount. Light, adjustable and moves out the way when not needed. Im a lefty, so the pictures are on a lef handed rifle, but I uploaded mirrored versions as well. Print in PETG or carbon infused…
Mini Schuhlöffel für unterwegs oder die Schublade. Gedruckt in PLA mit 25% Infill. Am Besten Schuhlöffel mit einem Band versehen. Den Schuhlöffel zuerst in den Schuh stellen, dann einsteigen und mit dem Band rausziehen.…
11.03.2022 - Updated positions of bores for both endcaps/ turned powerswitch (V2) This brackets fits to Meanwell UHP-350-24V power supply in combination with Ratrig V-Minion 3D Printer.
These brackets can be used to hold two MeanWell UHP psus (usually one 24v and one 48v). Two versions are provided: one for UHP-200 models and one for UHP-350 models. I also included a modified version of the din rail mount which holds a…
Die Einsätze sind leider von Modell zu Modell verschieden. Also einfach vorher vergleichen. Ausgemessen und mit Fusion360 konstruiert.
This is a set of 3-view profile drawings of the classic Bell UH-1H Huey. Included is a simple base that the wheels fit into. The cutout is sized for my Bambu A1 for a 2mm thick print, so if you need to resize the artwork or the base, keep…
I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…
Hier eine platzsparende Lösung um ein Paar Schuhe im Wohnmobil unterzubringen. Ich habe das Teil in ASA gedruckt mit 3 Walls, am besten mit Brim innen und außen drucken, da das Teil zum warpen neigt.
Small shelf/organizer for 36 ohuhu markers
A mounting bracket i have designed for this Brennenstuhl Powerstrip. I used 4x15mm countersunk wood screw to mount it to the underside of my desk. Print settings Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Das Filament…
Die beiden Seitenwände können gedruckt und anschließend verarbeitet werden. Die beiden Schrauben werden von außen mit Spax verschraubt. Die Löcher in den Ebenen sind so gewählt, dass die Schraube ordentlich Halt hat. Ebenfalls ist es…
Eine einfache Parkuhr den den österreichischen Anforderungen genügen sollte. Die Uhr hat min. 10cm Durchmesser und es gibt eine viertelstündliche Unterteilung. Wichtig ist auch, dass 2 Kontrastfarben gewählt werden um die Uhr gut ablesbar…
Und ein weiteres Model für die ESP32Cam Wasseruhr… Dieses Model lässt sich komplett ohne Supports drucken, passt auf alle Uhren auch die mit Deckel und ist deutlich kürzer. Die kürzere Bauweise spart nicht nur Druckzeit sondern liefert…
I made a modification for the Rapido 2 UHF hotend that works with the Stealthburner front hood. This way, you don’t need to print a new front —you can use your existing one. I created an extended duct to improve airflow under the nozzle.…
Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…
Minecraft truhla- krabička Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Remix of AndrzejG's model, that features a new "tear" 1x1 tray, the missing split color versions of 2x2, 2x3 and 3x3 trays, and a 1x1 card holder. All tray models are direct modifications of the original 1x2 split model, so everything…
Introduction This is a conversion from H-bot to coreXY for the ExtruH plotter which I designed a while back Is it better? No , although it is different Does it look cooler? Arguably , your mileage may vary Should you print it? Probably…
It's the sword from the kazuha's quest.
Simple treasure chest in two parts. Slicer file with supports included. 6x3 magnets to close the box. Filament hinches. Printorientation is for the box and the lid on the side (check the PSlicer file)
This is a remix for children playmobil scene the chest now opens print in 0,2Layer Bottompart with 15 toplayer top part with 15 bottonlayer as the dtiffness for the Filament rotation Lock also use RAFT on the TOP part
Mount for Brennenstuhl powerstrips
Be aware that some models differs from the one I bought, especially the size of the cable attachement. Check that before printing pls.
Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI Stealthburner face plate. Hex Version.
v3.0 Makita 18V Akku-Halterung für 3 Akkus - stark optimiert Ich habe mein eigenes Modell stark optimiert und die Fehler bzw. Schwächen der anderen Modelle angeschaut. Ich habe unter anderem folgende Optimierungen vorgenommen: Ästhetik…
Ich habe einen Halter für den CEE Stecker meiner Brennenstul Kabeltrommel gesucht und den von Thingiverse “crix26” für sehr gut befunden. Leider habe ich einen anderen Stecker an die Kabeltrommel verbaut und somit passt der Halter nicht…
This is a remix of https://www.thingiverse.com/thing:1219616 . Add a square base on the word Muhammad so that it can be easily frame it and hang it on wall. Take a look at https://www.printables.com/model/126440-allah-frame which makes it…
A pair of these brackets lets you fix the Brennenstuhl EcoLine 6x extension cable to the underside of your desk. Make sure to push up against the extension cable when removing the plugs. Print with PETG, PLA or other filament.
The design is based on the Bauhaus chess set from 1924 by Josef Hartwig. Each move is depicted on the chess piece itself. The board consists of a base and the clipped in tiles. It has been printed with a visible infill pattern, resulting…
Dies ist eine Ersatzschraube für den Rattan Gartenstuhl Allibert by Keter. Ich habe diese Schraube in Fusion 360 erstellt und den schwachpunkt ( den Ausschnitt in der Schraube) weggelassen. This is a replacement screw for the outdoor…
Die Halterung des Winkelsteckers nervt einfach. Ich habe dann das Modell von https://www.printables.com/@edmanderl_108910 gefunden und für mich nachgebaut. Das Kabel muss man links herum aufwickeln, dann passt es mit der Halterung ganz…
An interpretation of Lt. Uhura after hours. Print instructions Category: People
This is a C-LIN SSR 40A480VAC Mount for my DIN Rail Bracket. You can find the bracket here ! For the Mount you need M3 screws and M3x4 or M3x6 Heat Inserts. For the DIN Rail Bracket Mount you need M3 countersunk screws. “Single” and…
Kofferraum für den S50/S51. Deckel und Körper sitzen sehr straff zusammen. Ich habe die Dateien vom Vorbesitzer übernommen. Die STL. Dateien sind falsch skaliert. Diese müssen auf 10% skaliert werden, damit diese passen. Die 3mf Dateien…
Messuhrhalter zum einstellen des Zündzeitpunktes bei Motoren mit M14x1,25 Gewinde. Ich habe den Halter mit PLA gedruckt, aber man sollte vielleicht eher zu PETG oder ABS greifen. So oder so gilt, einschrauben NUR per Hand. Schichtdicke =…
My wife purchased the 320 set of Ohuhu Markers, but wanted them to stand up nicely in the bag. This insert was designed to help organize the Ohuhu 320 marker set so the markers stand upright and don’t shift around when moving the bag.…