Search results: underwater

Sort order

100 models

P
PrintablesHessenDnD

Propeller protection for underwater drone Fifish V6 and V6S

I made these as I could not find any openly available models. This is a low profile/low drag alternative to the original Qysea Fifish Propeller protector. Example pictures show prints made in draft mode (0.3mm layer height) for rapid…

Downloads
346
Likes
17
Rating
0
P
PrintablesCPSdrone

Underwater toroidal propeller inspired by MIT design

This is one of the toroidal propellers we've tested in this video: https://youtu.be/w90gM7bGdvk This is the right propeller. To get the left version, simply reflect it in the slicer. We've achieved the avg max speed of 2.26 m/s, at 1079W…

Downloads
1,740
Likes
92
Rating
5
P
Printablesuhltimate

Underwater Torpedo with Toroidal Propellers and Rubber Band Motor

Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…

Downloads
1,550
Likes
470
Rating
4.8
P
PrintablesHamzaCinar

Underwater Pose / Underwaterpose for Fishing | Unterwasserpose fürs Angeln | w. Propeller / Propellerpose

This Time i modelled an UNDERWATER POSE ! This was a request from a good friend who wanted to print some Poses. --------------------------------------------------------------------------------------------------------------- But do you…

Downloads
1,140
Likes
170
Rating
4.83
P
PrintablesConcreteHead

Underwater Battle

This is my first diorama, sculpted in Zbrush. It is based on the James Bond movie "Thunderball" I tried to get all the details right so i think it is very close to the movie. The vehicles and figures are made for SLA/DLP printers, but if…

Downloads
516
Likes
65
Rating
0
P
Printablesrav

Underwater waterfall sandfall for aquarium

Make sure that the air hose doesn't come out where the sand should - it need to turn at 90degrees angle 2-3cm down upper hole. It should work like this:

Downloads
449
Likes
84
Rating
0
P
PrintablesFabmaszter

Underwater Cities (incl. Expansion) - Organizer

This is an organizer for the board game Underwater Cities and the expansion New Discoveries. It works with sleeved cards, supports vertical storage and the lid closes flush. However, I am using 3D printed player markers instead of the…

Downloads
372
Likes
42
Rating
4.8
P
PrintablesTomishape

Underwater storage bowl

This trinket tray is a remix of my “parabolic” trinket tray.I focused on texturing the inside of the object, the part that holds the items.The texture is designed and oriented to facilitate printing for this type of shape. The result is…

Downloads
362
Likes
154
Rating
5
P
PrintablesMing Jin Yong

TetraROV: low-cost underwater drone

What - TetraROV is a remotely operated underwater vehicle capable of moving in all six degrees of freedom (surge, sway, heave, roll, pitch, and yaw) and is optimized for low-cost manufacturability. Who - The goal of the project is to…

Downloads
353
Likes
50
Rating
0
P

Fish tank ornament underwater mine

An underwater mine ornament decoration for your fish tank

Downloads
305
Likes
101
Rating
0
P
Printablesthall72
Downloads
225
Likes
43
Rating
0
P
PrintablesDELLAS

Underwater Float for Fishing

Underwater float for fishing: buoyancy: ~35gr minus material weight. use 2 walls with 0,6 mm nozzle and Lightning Infill (Cura) to get a good shaped cap. no supports needed PETG you can add beads during printing. It makes a rattle. Note…

Downloads
223
Likes
33
Rating
5
P
Printablesthall72

Lego Compatible (6090.dat) Minifig Helmet Visor Underwater

This model is compatible with the lego system.

Downloads
202
Likes
33
Rating
0
P
PrintablesCraftnado

Print-in-Place Rocket Ship Underwater Torpedo

A fun rocket-themed water torpedo that can print without supports. You may want to add a brim to prevent the model from tipping. Best if printed with PETG for use in water. Happy Printing! :)

Downloads
193
Likes
12
Rating
0
P
PrintablesLomax1983

Underwater Cities Insert (with all expansion)

The insert will accommodate - New Discoveries - Data Era - Biodome Promo - Mini-expansion Here's what you need to print: 2x Action_Tiles_box 1x Cover_Tiles_box 1x Buldings_box 1x Card_box1 1x Card_box2_hex 1x City_Domes_box1 1x…

Downloads
185
Likes
9
Rating
5
P
Printableslowenski

Underwater Noise Maker for Scuba Diving

Underwater Noise Maker for Scuba Diving H2YO clone

Downloads
160
Likes
30
Rating
0
P
PrintablesMitchell Cooke

Underwater Cities - Buildings

Custom buildings to use for when you upgrade your buildings in Underwater Cities. These are meant to be used instead of stacking the two circles loosely on top of each other, and should also fit inside the circles in the upgraded player…

Downloads
146
Likes
11
Rating
5
P
PrintablesJoshyu

Underwaterhockey stick

This is a right-handed stick for use in the sport underwaterhockey. UWH is played on the bottom of a swimming pool with scuba-gear, a cap, glove and a stick like this one. You can read more about the sport here:…

Downloads
125
Likes
7
Rating
0
P
PrintablesClaus

Underwater topedo.

The topedo is made with cavities for ballast. The chamber for ballast is approx. 150 cm3/cl. Balancing is important. Too little ballast will not dive, but will search for the water surface. Too much ballast will sink. Theoretically, the…

Downloads
118
Likes
19
Rating
0
P
PrintablesBbxDesigns

Crayfish/Crawdad underwater trap container

My take on a Crayfish/Crawdad container with an inlet tube to keep them from crawling/swimming back out

Downloads
105
Likes
16
Rating
0
P
PrintablesJimmerJammer

Underwater Cities Sub - Player Actions

We use these, instead of the game's included cardboard chits for choosing action slots. (You'll need to print 3 purple, 3 blue, 3 black, and 3 orange.) These were modeled based on the board game's cover art — a bit of it was in shadow,…

Downloads
94
Likes
10
Rating
5
P
PrintablesDuglum

Underwater Stacking Tower Game Block (like Jenga)

This is a block for a Jenga-like stacking tower game intended for under water use. Each block uses a M8 bolt and nut to add weight to it. Playing the game while in scuba gear in a pool is fun and also a great training exercise for trim,…

Downloads
85
Likes
8
Rating
5
P
PrintablesRav Meimad

Underwater Toy Torpedo

A great toy for the summer. Printed nearly completely solid. The goal is to make it neutrally bouyant so it flies under the water. is great for a game of underwater catch. Check out https://youtu.be/_7OVWHa4UL4 to see it in action Print…

Downloads
75
Likes
9
Rating
5
P
PrintablesCorey

Tunnels for Underwater Cities Board Game

I took snoozerbear's tunnel, shorten it, and added a slot for the upgrade piece. You will need to print it with a brim. The domes are here I love Cycco's subs. Nice solid pieces during game play: https://www.thingiverse.com/thing:3656240…

Downloads
74
Likes
0
Rating
0
P
PrintablesDominik Gneist

Underwater writing board

Unterwassertafel zum 3D-Drucken. Die Tafel ist 130x150mm groß, 3mm dick und sie schwimmt. Man kann einen Ø7-8mm runden oder Schlüsselweite 7mm hexagon Bleistift befestigen. Bleistifte schreiben unter wasser ganz normal! Es gibt auch genug…

Downloads
71
Likes
33
Rating
0
P
PrintablesRott3D

Eel underwater statue

Nice decoration on your wall, eel fish model

Downloads
69
Likes
4
Rating
0
P
PrintablesBravo_Lima

Sencor / Gopro camera underwater arm system

Arm system for underwater camera. This project is made for underwater use. The light conditions in deep water are required to using two lamps. The best way to hold the lamps are the arms beside the camera. The main load carrier parts are…

Downloads
68
Likes
15
Rating
0
P
PrintablesCorey

Underwater Cities Domes

For the white domes, I took snoozerbears' City and cover it with ianc2674's sphere at a reduced size. The green dome, I did the same thing, but made my own holy sphere. The red city comes from snoozerbear's set here . No supports needed.…

Downloads
59
Likes
6
Rating
0
P
PrintablesJakub Kočí

External light for underwater photography (For Olympus TG-6)

This is my latest attempt to make things watertight for recreational scuba diving. I used most of the knowledge from my previous article and summarized everything in this video: Consider your skills before you start working on this…

Downloads
59
Likes
16
Rating
0
P
Printablestimay83

Pool diving stick – Underwater toy

Pool diving stick is designed for underwater games and freediving practice. It sinks slowly and stands upright on the pool floor , making it ideal for breath-hold exercises or teaching kids how to dive in a fun and safe way. The model…

Downloads
57
Likes
14
Rating
0
P
PrintablesFluid Prints

Tropical Pineapple House Planter | Underwater Inspired Succulent Pot | Whimsical Home Decor

Who lives in a succulent on your desk? This detailed pineapple house features porthole windows and a retro-style chimney. It’s a nostalgic and fun way to display your favorite indoor plants while adding a tropical vibe. 💙 Enjoying the…

Downloads
57
Likes
21
Rating
0
P
PrintablesJacobson

MATE Underwater Robot Parts

Parts used for MATE ROV Use, modify share

Downloads
55
Likes
9
Rating
0
P
PrintablesAndrew Ryan

Underwater hockey trophy

I printed at 150% scale on green silk pla and came out well. I used tree supports, however looking at the final print except for the base of the puck it may not be necessary. If there is demand I could upload a copy with a blank puck.…

Downloads
52
Likes
9
Rating
0
P
PrintablesAshton

UnderWater Torpedo Toy! (Print in place)

1. I recommend using PLA with extruder setting of 200°C or ABS at 230°C. A layer height of (or medium resolution) and 20% infill so it floats. 2.Use rafting and supports while printing this project so it has better bed adhesion.

Downloads
48
Likes
11
Rating
0
P
PrintablesM2t4e

Underwaterrugby Diving Mask

Frame for the famous underwater rugby mask that is compatible with Scubapro Futura I silicone and glass. The model also has an improved holder for a sturdy strap as a mask strap. There are several rings available with different fits…

Downloads
47
Likes
5
Rating
0
P
PrintablesJoshyu

Underwaterhockey puck

This is a simplified puck for use in the sport underwaterhockey. UWH is played on the bottom of a swimming pool with scuba-gear, a cap, glove, stick and a puck like this one. You can read more about it here:…

Downloads
43
Likes
2
Rating
0
P
PrintablesPim Bongaerts

Underwater 1-inch ball mount

Simple one-inch ball mount for mounting underwater strobes and videolights using clamp (e.g. Ultralight/Nauticam/Aquatica/Inon/Ikelite). Requires a: ¼-20 Hex Head bolt (for mounting and internal strength; I use 2.5 inch for mounting on 1…

Downloads
42
Likes
3
Rating
5
P
PrintablesKazi Toad

Sony FDR-X3000 action camera underwater housing lens cap

These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is a sliding lens cap for the Sony FDR-X3000 action…

Downloads
40
Likes
6
Rating
0

Underwater Writing Board (Narrow Width)

Underwater writing slate for SCUBA diving with a narrower width. I removed 20 mm of the whitespace and kept all the original features. Shown next to the original design. Prints without supports.

Downloads
39
Likes
7
Rating
5
P
Printablesfletch.makers

Underwater Cities Organizer - OPINIONATED

This is a organizer for the board game, Underwater Cities (RIO GRANDE EDITION). Before starting this project, I took at look at what was available on Thingiverse for an organizer for Underwater Cities, and found…

Downloads
39
Likes
1
Rating
0
P
PrintablesMaker_Lars

Underwater Cities - player box V2

This Player box can hold the cardboard player tokens which comes with the base game. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Infill: 10% Filament: FilRight PLA Black Notes: Nozzle 0.4mm…

Downloads
38
Likes
2
Rating
0
P
Printablesflixti

THW Underwater Kinematics mount

The German Federal agency for technical relief is using underwater kinematics lamps for their helmets. These lamps are also common in the diving sport. I designed a holder for the mounting system by GoPro. This allows using the lamp in…

Downloads
38
Likes
9
Rating
0
P
Printablesoktkas

Underwater Light Diffuser

A diffuser for the LetonPower BB27 underwater photography light from Aliexpress. Likely fits the other models and clones too. No tools needed - just clips on. Printing instructions Clear PETG works best. Use a default preset for a 0.2 -…

Downloads
36
Likes
4
Rating
0
P
PrintablesTheMazePrinter

Underwater Chess

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm. Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below. Start with Charcoal At layer 4: Swap with Slate Gray Sparkle At…

Downloads
36
Likes
14
Rating
0
P
PrintablesSean Kane

Outlive Underwater Board Game Expansion - Scientist Model

The Underwater expansion for the Outlive board game was only ever released in retail and does not come with components that match what was designed for the Collector's Edition. Due to this a few people have made models of the robot unit…

Downloads
32
Likes
3
Rating
0
P
Printablesquiller

Underwater Cities Box Organizer

Storage solution for the board game Underwater Cities from Rio Grande Games. This insert is designed to be highly functional, with most parts coming out of the box and on the table to use during play. Note that only part of the expansion…

Downloads
29
Likes
2
Rating
5
P

Underwater Worlds - 3 Part Wall Relief

Underwater Worlds - 3 Part Wall Relief, i designed for my Beedroom. I might make a silicone mold from SLA parts, then glue it, remove the part's lines, then do a silicone mold and then a cold cast with aged bronze. But i think it also…

Downloads
29
Likes
3
Rating
0
P
PrintablesXblade77x

Underwater Camera Tray

The attachment on the handle accepts the GoPro quick connect bases. It would work for a variety of camera housings though, as they all seem to use the standard ¼ 20 screw. If you just wanted a small handle I also made a base that goes…

Downloads
28
Likes
8
Rating
0
P
PrintablesMorphomesh

Colorful Underwater Tropical Reef Fish

The colorful tropical fish uses Cyan, Magenta, Yellow, and Grey along with ten other #colormix combinations to create the color and shading. It can be printed in one piece using support or using the alternate split model can be printed in…

Downloads
27
Likes
15
Rating
0
P
Printablesjnabedian

Underwater Cities remixed Resource Tray

An alternate resource tray for LawMoney's Underwater Cities insert.

Downloads
27
Likes
3
Rating
0
P
Printablessunset3d

Dragon Underwater

Hi. Today, we're modeling a dragon with a z-brush. You can print it out using tree support and print it out as 20 outer wall 3.

Downloads
25
Likes
5
Rating
0
P
Printableschoovick

Gopro case insert for underwater case and accessories

Fusion file included for your own custom modifications needs

Downloads
25
Likes
6
Rating
0
P
PrintablesDiamondCore

Abandoned Underwater City

This is a small, simple-to-print miniature underwater city for your own use! It's even benefited by supports! You can remove supports if you want too, but it's not required, and may help sell it a little more because of it's standard scale!

Downloads
25
Likes
7
Rating
0
P
PrintablesSmidt Builds

Underwater Viewer

4" Sewer/Drainage PVC Pipe Underwater Viewer This project is a fun and easy way to build an underwater viewer for both kids and adults. I had some leftover 4" sewer/drainage PVC pipe and decided to design these printable parts to put it…

Downloads
25
Likes
24
Rating
0
P
PrintablesJens83

Playmobil sub bot underwater motor adapter

Simple adapter to attach the Playmobil underwater motor to the sub bot. Clicks in place. Category: Toys & Games

Downloads
25
Likes
5
Rating
0
P
Printablesvhartong

Playmobil Underwater Engine Rudder

Replaces missing rudder on Playmobil Underwater Engine

Downloads
24
Likes
4
Rating
0
P
PrintablesSean Kane

Outlive Board Game - Underwater Expansion Robot Model

This is a remix that attempts to create a new robot unit for the Outlive Underwater expansion that closely matches the style used in the Outlive Collector's Edition while also having a robot that matches what is on the expansion's cover…

Downloads
23
Likes
1
Rating
0
P
PrintablesAndrew Ryan

Underwater hockey trophy (blank)

A reupload of my previous hockey trophy with a blank puck. No supports required on my printer, Ender 3. Slight problem with warping on the base which I might work to fix in further iterations.

Downloads
23
Likes
1
Rating
0
P
PrintablesTheodore

Underwater Cities Insert (with all expansion) + Geekup Bits Mod + Sleeved

A mod of Lomax1983's insert that fits sleeved cards, Geekup Bits, and Geekup Money all in one lid lifted (~1.5 cm) box.

Downloads
23
Likes
6
Rating
0
P
PrintablesBrixsat

Action Camera 360 rig (with underwater case for outdoor use)

Customized version of http://www.thingiverse.com/thing:1324211 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1324211 Print instructions Category: Camera Summary Customized version of…

Downloads
23
Likes
6
Rating
0
P
PrintablesUvulaBob

Underwater Cities Disc Stacker

This is for folks with the double-layer player boards that come with Underwater Cities: New Discoveries. There may be some other way to get them. Tired of having your stacked city discs go flying any time you bump your city, fat-finger…

Downloads
22
Likes
1
Rating
0
P
Printablescrazy.biker_84

Zoom-ring-adapter for olympus PT-EP01 underwater housing

Zoom-ring for the Olympus PT-EP01 underwater housing and Zuiko 14-42mm lens. Maybe it fits with newer models too... The inner ring is made of TPE, the outer one is PLA. I´ve printed it in one piece with dual extruders but i think it´s…

Downloads
22
Likes
0
Rating
0
P
Printablesh2odragon

Underwater Smoking Prohibited sign

100x160mm sign, reading “under water smoking prohibited”, with art of a cigarette under waves. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign…

Downloads
21
Likes
4
Rating
0
P
Printablescsicar

DJI OSMO Action 5 Pro - Underwater Camera Tray with integrated Trigger

Print-Settings: Setting Value Perimeters 11 Top-Surfaces 0 Botton-Surfaces 0 Infill 0% Paint-On Fuzzy Skin (optional) 0.2 / 0.2mm Needed Hardware: 1x 5M Heat-Set Insert (Stainless Steel) 3x10 3M Bolt (Stainless Steel) O-Ring (OD: 19mm,…

Downloads
21
Likes
3
Rating
0
P
PrintablesJacobson

MATE Underwater Robot Thruster Guard

This Thruster Guard for small bilge pumps.

Downloads
21
Likes
0
Rating
0
P
PrintablesNavneet Sharma

1.2kg Thrust Underwater ROV / AUV Thruster (A2212 BLDC Motor) + Guide

OVERVIEW: COMMERCIAL-GRADE 1.2KG UNDERWATER THRUST FOR UNDER $15 IN PARTS Building an Autonomous Underwater Vehicle (AUV), Remotely Operated Vehicle (ROV), or Unmanned Surface Vessel (USV) usually means spending $200+ per thruster on…

Downloads
20
Likes
0
Rating
0
P
PrintablesSam H

Underwater Rover Camera Mount

This is a camera mount I designed for my ROV. It has a servo mount for tilting the camera up and down in the enclosure dome. Pretty strait forward install. I printed in PETG with 100% infill. There are two 3mm heat set brass inserts.…

Downloads
20
Likes
2
Rating
0
P
Printablesnir.friedman

Underwater photography snoot with beam splitter

Summary This is a design of a snoot for an underwater strobe. The snoot uses a beam splitter to put the beam from a torch and the strobe on the same exact path. This means that the light from the torch provides an accurate approximation…

Downloads
17
Likes
2
Rating
0
P
PrintablesLayersLab

Aquarium Underwater Signboard

I have included a range of signboard models in various sizes, from 8mm x 55mm to 40mm x 80mm. Please select your preferred size and import it into your slicer software. Use the 'Embossed' option to add your desired text, setting the text…

Downloads
16
Likes
5
Rating
0
P
PrintablesBlueNova_

Underwater Drone Model

Just a fun model

Downloads
16
Likes
0
Rating
0
P
PrintablesBrixsat

Action Camera 360 rig (with underwater case for outdoor use)

This a 360 Action Cam rig, if you like it please share and customize it. I would appreciate it. Video of my first print attempt. Print instructions Unassociated tags: 360 Camera rig, action camera 360 rig Category: DIY Summary This a 360…

Downloads
16
Likes
0
Rating
0
P
Printablessunset3d

Dragon Underwater

Hi. Today, we're modeling a dragon with a z-brush. You can print it out using tree support and print it out as 20 outer

Downloads
15
Likes
5
Rating
0
P
PrintablesPoint3333

Underwater Camera Mount

A beautiful calm and day in the Winter school holidays, and No. 1 was wanting to try out his camera on the paddleboard. Juggling a camera and a paddle can be a bit tricky, especially given that the Polaroid camera doesn't have any form of…

Downloads
15
Likes
0
Rating
0
P
PrintablesChristophe-P

Fan Grill Underwater Kinetics

j'ai acheté ce model sans ventilateur et j'ai créé un support pour installer un ventile de dimension 120X120 X38 mm il faut une prise 12V https://www.amazon.fr/gp/product/B002PF7CD6/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…

Downloads
15
Likes
4
Rating
0
P
PrintablesQuietLeni

Underwater Cities: Data Era Board Game Expansion Disk Resources

I didn't like the card board chits for the Data Era expansion for Underwater Cities, so I made these.

Downloads
13
Likes
0
Rating
0
P
PrintablesAoiki

Underwater UNO board for Scuba diving

This is a Board for playing UNO underwater while diving. M3x10 screws are used for the poles. M4 screws with M8 nuts are used as weights. The magnets are 10mm in diameter and 2mm high. Electrical tape is used to show the colour wished for…

Downloads
11
Likes
4
Rating
0
P
PrintablesChappie

6-DOF ROV – Open-Source Underwater Robot

Sharing the CAD files for a 6-DOF ROV (Remotely Operated Vehicle) project that I'm no longer working on. The design includes the ROV frame, thruster assemblies, and other structural components. Uploading the files for anyone interested in…

Downloads
11
Likes
4
Rating
0
P
Printablesmikeller

Adaptor for SeaLife Sea Dragon Underwater Video Light for 18650 Batteries

This adaptor allows you to use 2 18650 batteries instead of the original battery in SeaLife Sea Dragon underwater video lights that come with 7.4V battery packs. Tested with a Sea Dragon 1500F. In order to make this work, a piece of blank…

Downloads
10
Likes
1
Rating
0
P
PrintablesForgeFiles

Underwater Mushroom Forest - 3D Printable STL File

A unique 3D printable creation — this Underwater Mushroom Forest Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…

Downloads
10
Likes
2
Rating
0
P
Printablesmikeller

Lens Cap for the Intova SP1 Underwater Camera

An improved lens cap for the Intova SP1 underwater camera (I think successor cameras like the Intova Sport HD, Intova Sport Pro, Intova Nova, ... all used the same housing, so this cap should fit them as well). It has the following…

Downloads
10
Likes
0
Rating
0
P
Printablesmikeller

USB Adapter for SeaLife Micro HD, HD+, 2.0, 3.0 Underwater Cameras

Replacement USB adapter for the SeaLife 'micro' camera series. It uses the PCB that is in the USB adapter that comes with the camera, and is sold as a replacement part here:…

Downloads
9
Likes
1
Rating
0
P
PrintablesForgeFiles

Sunken Ship Underwater Book Nook - 3D Printable STL File

Transform your bookshelf into a portal to another world with this Sunken Ship Underwater Book Nook Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested…

Downloads
8
Likes
1
Rating
0
P
PrintablesSensory 3D Lab

Underwater Treasure Texture Roller & End Stamps | Play Dough & Sensory Play

Create your own 3D-printable sensory tools This free underwater treasure model is a sample of what you can create at sensory3dlab.com :…

Downloads
7
Likes
2
Rating
0
P
Printablesmattoni

kayak action cam underwater support

I've designed an action cam support to be fixed to the front fin of the Itiwit kayak (Decathlon). There are two versions of the model. I've printed and tested the first one. The "rounded" version is quite similar..the main difference is…

Downloads
7
Likes
3
Rating
0
P
PrintablesPim Bongaerts

Underwater Positioning Beacon / GRAV

Beacon that we use for simultaneous USBL tracking and visual recording underwater. The beacon ("GRAV") consists of a 3D-printed bracket that holds a Subsonus USBL tag , 2x GoPros in underwater housings and 2x Buoyancy floats . The beacon…

Downloads
6
Likes
1
Rating
0
P
PrintablesDraino

Underwater Tea Light

A model of an underwater tea light I purchased from Amazon. I created this to subtract from other models so they can be lit. Remember to scale the first object before subtraction so the light still fits. Instructions I used a digital…

Downloads
6
Likes
1
Rating
0
P
PrintablesForgeFiles

Underwater Coral Reef Panel - 3D Printable STL File

A unique 3D printable creation — this Underwater Coral Reef Panel Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…

Downloads
5
Likes
0
Rating
0
P
Printableshyperair

Wrench for 1/4" thumb screws used on underwater camera trays

Wrench to tighten/loosen 1/4" photography thumb screws

Downloads
5
Likes
0
Rating
0
P
PrintablesPichthys

Customizable 67 mm Wet Lens Flip Adapter for Underwater Photography

Wet lens adapters simplify underwater macro photography, making it far more ergonomic. Unwilling to spend hundreds of euros on a technically simple part, I designed my own. The original version, printed in carbon fiber-reinforced PA, has…

Downloads
3
Likes
1
Rating
0
P
PrintablesDennis Masi

Scuba Underwater Navigation Buoy

Underwater navigation buoy/marker for shore diving. When sore diving (esp in the carribbean), one usually does a walk-in entry through the surf and in some cases swims on the surface or underwater until reaching a/the reef drop off. This…

Downloads
2
Likes
0
Rating
0
P
Printablesedcasati

Pond Filter Box for underwater water pump

The fish pond in our backyard tends to generate gunk that quickly blocks the small intake vents on the water circulation pump. Enclosing the pump in a filtered box catches the gunk before it can arrive at the pump intake slits. Printed in…

Downloads
1
Likes
0
Rating
0
P
Printablescsicar

DJI Omso Underwater Housing Lens Bumper

Print upside down in Hard TPU with 10 perimeters. Compatible with the dji osmo action 5 pro camera housing

Downloads
0
Likes
0
Rating
0
P
Printables

Underwater Cities: Data Era Board Game Expansion Disk Resources

I didn't like the card board chits for the Data Era expansion for Underwater Cities, so I made these.

P
Printables

Bioshock Splicer Mask -"Underwater" (Sculptober Day 6)

License: Attribution-NonCommercial-NoDerivs CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is…

P
Printables

Underwater Light Diffuser

A diffuser for the LetonPower BB27 underwater photography light from Aliexpress. Likely fits the other models and clones too. No tools needed - just clips on. Printing instructions Clear PETG works best. Use a default preset for a 0.2 -…

P
Printables

External light for underwater photography (For Olympus TG-6)

This is my latest attempt to make things watertight for recreational scuba diving. I used most of the knowledge from my previous article and summarized everything in this video: Consider your skills before you start working on this…

P
PrintablesHBC.CRÉATION

UNDERWATER LASER - ARCHON J1

3D Model of ARCHON J1 Green Beam Diving Light I've created this model for those who wish to create or study (through CAD Softwares) some laser fixtures for underwater accessories or other. Files : - STL - STEP Thanks for your feedback.…

Likes
0
Rating
0

Underwater Temple Portal With Its Whildwind Effect

Underwater Temple Portal With Its Whildwind Effect Each portals and effects are SUPPORTED and can be printed on a resin printer ALL portals and effects are separated and can be used individually. (no glue needed to fix effect on Portals,…

Likes
4
Rating
0