Search results: valv

Sort order

2,336 models

P
Printablespastaoceanfrog

Tire valve cap (Schrader)

Print your own valve caps for your car and bike. This cap fits a standard Schrader valve. These caps have more threads than normal, so they stick better, and you don't loose them. -Print with 0.1mm layer height for good detail -Add a 10mm…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
8,665
Likes
793
Rating
4.91
P
PrintablesSE

Car / bike valve cap (progressive thread)

Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant

Downloads
2,028
Likes
234
Rating
4.92
P
PrintablesArrow_Raider

Schrader Valve Cap

I had trouble printing existing Schrader valve cap models in PETG, so I designed my own. This model has some error tolerances built in so it should work better with PETG which isn't as dimensionally accurate as PLA. Print in 0.15 layer…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,642
Likes
245
Rating
4.91
P
Printablespressi

Cyclone Vacuum Dust Separator with Built-in Pressure Relief Valve

Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…

Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,457
Likes
313
Rating
5
P
PrintablesMarkoJ

Simple Water Ball Valve, Hose and Gardena Fittings (print in place)

This is a very simple emergency low-pressure water ball valve that can be printed quickly in place (print-in-place) and with no assembly. ver. 1 with 0,3 mm tolerances (in optimization, with comments…) Should be printed using mechanically…

Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant

Downloads
1,423
Likes
103
Rating
4
P
PrintablesNuvz

Chevrolet Bow Tie Tire Valve Stem Cap Chevy

This is a simple valve stem cap I made for my Chevy. Great idea for a gift or just to doll up your ride. You may need to print it with a brim! The pre-sliced file is for 5 caps. Color break is at 14.3.

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
798
Likes
97
Rating
5
P
PrintablesAsa

Schrader Valve Caps - for bike and car tires

Simple model of a schrader valve. The thread of a schrader valve is not standard for Fusion360 so you'll need to add a custom thread. Enjoy!…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
583
Likes
108
Rating
5
P
PrintablesPeter Farell

Marge and Homer Valve Stem Cap : Bike Cap

Marge and Homer Valve Stem Cap : Bike Cap Fits Schrader Valve Stems.

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant

Downloads
567
Likes
168
Rating
5
P
PrintablesNuvz

Toyota tire valve stem cap

This is a tire valve cap with a Toyota logo I made to give as a gift. Super easy to print. Color change is at 14.3. You may need to print it with a brim. The pre-sliced file is for 5 caps.

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
531
Likes
58
Rating
5
P
PrintablesKayuHD

Wasserhahn/ventil Knauf/Griff mit integrierter 7.7mm Rastbuchse / Faucet handle valve with integrated 7.7mm snap-in socket

Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…

Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant

Downloads
508
Likes
29
Rating
5
P
PrintablesJamie Claye

V2 - 22mm One Way Flow Restriction Valve for Multiple Patient Lung Ventilation

With these designs, I'm assuming the ventilation flow with the valves in place is sufficient and not too restricted. Rev 2 goes way from the single object print and the valve floats a little better in the chamber resulting in a better…

Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant

Downloads
459
Likes
41
Rating
5
P
PrintablesMartin

Bullet Valve Cap

Take a look at Shrek Valve Cap ! --------------------------------- Good looking valve cap for your bike made for Schrader type valve = most common --------------------------------------------- Print : 0.15mm NO Supports PLA, PETG, ABS…..

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant

Downloads
443
Likes
114
Rating
5

Starship Valve Cap

Starship shaped valve cap for Schrader and Presta valve types

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
405
Likes
147
Rating
5
P
PrintablesLayerCake

IKEA Skadis Valve Index Holder with Charging Function

Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
397
Likes
98
Rating
5
P
Printableszosman

Presta Valve Core Removal Tool

A quick and easy tool to remove the valve core on your Presta bike valve Uses a very low amount of filament Print settings don't really matter as tool doesn't require much force to remove the valve core, but i prefer to iron the top for a…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
298
Likes
19
Rating
4.83
P

VALVE Index Knuckles and HTC VIVE Tracker 3.0 Charging Stands

These here are some simplistic Charging Bays for my Index Controllers and also my new VIVE 3.0 Trackers. I didn't like how all my VR Gear was just laying in my Drawer so i decided to get it all a bit more Cleaned up ^^ I Recommend using…

Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant

Downloads
246
Likes
26
Rating
5
P
PrintablesMartin

Shrek Valve Cap

Take a look at Bullet Valve Cap! Shrek Valve Cap made for Schrader type valve = most common Print : 0.15mm No Supports needed PLA, PETG, ABS…..

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
242
Likes
76
Rating
5
P
Printablesbart

Dust extraction/hoover 3-way valved manifold/splitter

I wanted a way to connect a dust extractor to my Workbee CNC, band saw, and potentially a third tool (e.g. sander) without having to manually plug the dust extractor hose between tools. So I designed this three-way manifold with butterfly…

Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant

Downloads
211
Likes
59
Rating
0
P
PrintablesLyzGameArt

Valve Index Lowpoly Visor

I made my own version of the lowpoly index visor after seeing a lot of people where having trouble printing the other one on thingiverse

Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant

Downloads
201
Likes
62
Rating
4.67
P
Printables4nthonylin

Valve Index Basestation Power Cord Wrap

This print is used to help organize the super long cables for the Valve Index Basestations (SteamVR2). To use, detach the cable from the brick, slide the brick into the model, reattach the cable and wrap around the brick, finally plug in…

Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
189
Likes
56
Rating
5
P
PrintablesLayerCake

Valve Index VR Desk Dock

Important Please try the cables before printing. Display Port can be finicky and an extension cable might not work for your setup. For me only a very short cable of 2 meters worked. Required Hardware 4 wood screws 3.5x16 for mounting on…

Print approx. €3.96–€4.85 excl. taxPreliminary estimate for one variant

Downloads
181
Likes
93
Rating
5
P
PrintablesStarGate01

Valve Index Rear Cable Clip (Larger hooks)

This remix increses the size of the hooks, to make the clamp fit better when printed on lower-end printers. Remixed from: https://www.thingiverse.com/thing:4908421 Category: Video Games

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
177
Likes
13
Rating
5
P
Printablestom

Ventilkappe Schraderventil mit Werkzeug/ Schrader valve cap with tool

Siehe auch " Upgrade zu meinem Modell "Ventilkappe Schraderventil mit Werkzeug"/ Upgrade to my model “Schrader valve cap with tool ” Vor allem am Vorderreifen unseres Elektrorollers Mi 3 ist es sehr schwierig, die Ventilkappe zu…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
173
Likes
10
Rating
5
P
Printablesuc

Valve cap Presta with intigrated core remover

Printmaterial: I recomend using PETG Settings: 100% infill 0.10mm layerhight Supports: none Printer: Prusa mini + Printtime: ca. 20-25 min HAPPY PRINTING :-)

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
171
Likes
94
Rating
5
P
Printablesbart

Scuba cylinder DIN valve screw cap

Does exactly what it says on the tin. Screw cap for scuba cylinder DIN valves to prevent dust and other crap getting into the valve. Has a hole on the outside for threading through a string and attaching to the cylinder. Edit 03/06/2025:…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
7
Rating
4.5
P
PrintablesVincentM

bouchon valve d'oxygénation INTEX_Air Jet Valve Cap

bouchon de valve pour système d'oxygénation d'air INTEX, ce bouchon permet de stopper la production de bulles. ce visse à la place de la valve. Air Jet Valve Cap for INTEX air oxygenation system, this cap allows to stop the bubble…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
14
Rating
0
P
PrintablesJonasovo

Red Valve Extruder Visualizer for Anycubic Kobra Go / Ender 3

Remix of GLeZz's Red Valve Extruder Visualizer to fit bowden extruders on Anycubic Kobra Go / Ender 3. Downscaled. Print with supports, split the valve into two parts to save material, print the nut separately. Fits to stock extruder on…

Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
19
Rating
0
P
PrintablesMakerKJS

Heart Valve Stem Cap

Heart shaped Shrader valve stem dust cap. The included Gcode file prints at just the right size on my Artillery Genius Pro, but your experience may vary.

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
15
Rating
0
P
PrintablesYao Wei

Valve Index front cable guide

WARNING: Tilting could still cause strain close to the connector in front of the facial interface.

Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
6
Rating
4
P
PrintablesJameszy

Self inflating matress valve seat

The receptacle part of a self inflating mattress where the valve plugs into the mattress. Printed with garbage creality green pla.. rubber cemented in place.. holding up sofar.

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
2
Rating
0
P
PrintablesNewksHub

Hive Smart Radiator Valve TRV Cover

Replacement Hive cover to change the colour instead of painting. This is non rotating so will not be able to adjust the valve manually from the valve itself. I decided to leave the button available if required and to try and keep the…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
4
Rating
0
P
Printablestom

Upgrade zu meinem Modell "Ventilkappe Schraderventil mit Werkzeug"/ Upgrade to my model "Schrader valve cap with tool"

Ich habe das Werkzeug zum Lösen der Ventilkappe meines Modells " Ventilkappe Schraderventil mit Werkzeug " verbessert. Ich habe das Werkzeug etwas modifiziert, damit es besser greift. Außerdem habe ich einen 5mm-Sechskant für einen…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
41
Likes
2
Rating
0
P
PrintablesKidvolution

Honey Gate Valve / Squeeze Tap for Honey & Thick Liquids – No Supports // Quetschhahn Honig & dickflüssige Medien – kein Support

## About this model This is a 3D-printable redesign of an original honey gate valve, the kind used by beekeepers to tap honey from buckets and containers. I fully re-modeled the original part and reworked several areas specifically so…

Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
3
Rating
0
P
PrintablesJedda

Profitec Pro300 handles for hot water steam valve - Profitec Pro300 Griffe für Heisswasser-Dampfventil

Handles for the hot water / and steam valve Profitec Pro300 with 6 mm valve axis The core (here made of orange Prusa ABS) should be printed from ABS or a similar material, as other materials become soft and deformed by the heat. I printed…

Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
1
Rating
0
P
PrintablesWillie Designs

Knob, Valve, Hose Quick Disconnect

Update June 1, 2023: After 3 years of being in direct sunlight and intense Texas heat this replacement part is still holding up. I've probably had this solid brass shutoff valve and quick connect for 30 years. So when the knob for the…

Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
2
Rating
0
P
PrintablesDice

Threaded Tire Valve Cap

Made for Schrader type valve. (the most common type) Fits mountain bikes, road bikes, cars and motorcycles. 0.15mm tolerance on the default model and 0.05mm on the tight version Optimized for 0.12mm layer height. Please, share your…

Downloads
7,738
Likes
2,272
Rating
4.94
P
PrintablesUniCube3D

V8 Engine Model | Functional Pistons, Valves & Timing Chain

This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…

Downloads
6,686
Likes
1,986
Rating
5
P
PrintablesPeterH1500

100mm / 4" Truncated & Full-Size Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…

Downloads
5,148
Likes
843
Rating
4.85
P
PrintablesTinkerer4000

Scalable Butterfly Valve

I needed some air duct valves to control ventilation for several printers. I made some of PeterH1500's ball valves which are really good, but they are too heavy duty for some of my uses. I needed a lightweight valve that was cheap to make…

Downloads
4,534
Likes
3,032
Rating
4.75
P
Printablesloicloic

Stand for Valve Steam Deck

TL;DR: Model B “Recommended” is the most aesthetically pleasing, Model C “Minimalist” is the smallest and fastest to print and will fit better in a pouch/case/bag. The purple one on the main picture is Model B, the light blue one is Model…

Downloads
4,466
Likes
349
Rating
4.96
P
PrintablesEcho116

Multiple Styles of Schrader Caps, Tire Valve Cap for Cars, Bikes, Carts, Etc.

From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…

Downloads
3,708
Likes
1,662
Rating
4.96

Cyclo valve cover

Cyclo valve cover for 6 and 8 mm valves I recommend putting a collar around the valves so that they hold well on the printing plate

Downloads
3,097
Likes
805
Rating
4.94
P
PrintablesPouOu

Presta Valve Cap

Wanted a cap that sat a little firmer on, as they tend to fall off, or crack when you try to make them sit well. Recommends printing with maximum 0.1 layer height. Printing multiple at once is no problem. Remember dry filament. You might…

Downloads
2,917
Likes
276
Rating
4.93
P
Printables3DontheGO

Rubber Duck Valve Cover

Loved this design, wanted it to make a Valve cover! Can be tight to get on the valve stem at first but keep it nice and straight and it goes on great! Printed this in Yellow PLA at 0.3mm with a little bit of variable layer height on the…

Downloads
2,528
Likes
475
Rating
4.94
P
PrintablesExtrutim

Vacuum Bag Valve Spacer

A small but very useful helper for vacuum bags. This allows the air to be extracted much easier and faster. You can simply stick the part with some double-sided tape from the inside to the valve. Of course it works without tape but then…

Downloads
2,494
Likes
643
Rating
4.95
P
Printables3D Rejsen
18+

The source marked this model as adult content.

Downloads
2,462
Likes
1,231
Rating
4.93
P
PrintablesHondzik

Gardena valve adaptor

this part: https://1url.cz/FKSrA for this valve: https://1url.cz/EKSry only small O-ring needed

Downloads
2,372
Likes
353
Rating
4.88
P
PrintablesForgetter

Chevy Camaro LS3 V8 Engine - printable valves, lifters + N20 mini motor holder

Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…

Downloads
2,320
Likes
706
Rating
4
P
Printablessh

🤙 Aloha Shaka hand - Bike valve cap

Info: another hand model for valve cap ALOHA! Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…

Downloads
2,267
Likes
428
Rating
4.92
P
PrintablesUniCube3D

V6 Engine Model | Functional Pistons, Valves & Timing Chain

This project is a fully functional V6 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6, Fully printable timing chain, Can be…

Downloads
2,006
Likes
655
Rating
4.67
P
PrintablesPeterH1500

100mm / 4" Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…

Downloads
1,984
Likes
380
Rating
5
P
18+

The source marked this model as adult content.

Downloads
1,941
Likes
379
Rating
4.5
P
PrintablesPhilipp
Downloads
1,882
Likes
251
Rating
4.89
P
Printablessh

🤘 Rock&Roll horns hand - bike valve cap

Info: remixed Robin_Pe rude finger cap found out, that his version printed at 97% with 0.4mm nozzle works great for me (Prusa MK3S+) Not for presta valve ! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already…

Downloads
1,832
Likes
327
Rating
4.82
P
PrintablesPeterH1500

63mm / 2½" Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…

Downloads
1,711
Likes
376
Rating
5
P
Printablesfirstgizmo

Garden Hose Valve

This ball valve can be used to reduce flow a little or shut it completely. It is fully printable and has a ¾" tread on both sides, so you can use it with a lot of other hose connectors you might already have at home. Printing: Print all…

Downloads
1,654
Likes
714
Rating
4.7
P
Printablesluma

Gas Cylinder Valve Indicator

Ever forget to close up your gas cylinders and then donate your bottle gas to the atmosphere? This project fits onto a 5-lobe Sherwood cylinder gas valve and provides an instant visual indicator if the valve is opened or closed: The…

Downloads
1,649
Likes
188
Rating
5
P
PrintablesSunShine

Print in Place Check-Valve!

Check out the video around this project!: https://youtu.be/1E3Ajqaapqk 0.4mm Nozzle 0.2mm Layer height

Downloads
1,601
Likes
154
Rating
4.7
P
Printables47

Easy to print valve stem cap

Super easy to print valve stem cap fits standard valve stem on all types of vehicles no supports If you like this model check out this one https://www.printables.com/model/1381047-valve-stem-cap-with-print-in-place-air-release

Downloads
1,594
Likes
817
Rating
5
P
PrintablesRNLDNKP

Radiator valve adapter M28 > M30 + Pin Extension

For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…

Downloads
1,525
Likes
49
Rating
5
P
PrintablesBuilt_Over_Bot

Duck Valve Stem Cap

Please note that our files are free for personal printing use. If you are commercially printing any of our files, you must be a club member.

Downloads
1,520
Likes
213
Rating
4.69
P
PrintablesTater Zoid

Poo Emoji Valve Cap Schrader

I can't find the original file I used to create this Valve Cap. It's an emoji, open source - right? Print Settings Printer: Qidi Tech x-One 2 Rafts: No Supports: Yes Resolution: .10 Infill: 15% Filament: Hatchbox PLA Gray Category: 3D…

Downloads
1,519
Likes
135
Rating
4.91
P
Printablesfirstgizmo

Aquarium fish tank Air Valve

Used for regulating airflow in a hose, like used for air stones in fish tanks. Printing: Print all parts in the given orientation. 0.2mm layerhight is recommended. Use: Feed the hose through the valve and tighten it for regulating the…

Downloads
1,442
Likes
293
Rating
4.92
P
Printablessjogerst

3D Tesla Valve

A Tesla Valve is a type of one-way fluid valve that has no moving parts. Category: Engineering

Downloads
1,351
Likes
58
Rating
5
P
PrintablesPeterH1500

100mm / 4" Butterfly / Throttle Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…

Downloads
1,270
Likes
238
Rating
5
P
PrintablesThe Brumberjack

Servo Mounted Ball Valve Blast Gate

Assembled with all of the same hardware as the original one, plus 2 longer bolts. I used 35mm I believe. Here is the link to the video where I talk about the servo motors I used.

Downloads
1,239
Likes
141
Rating
5
P
Printableswheatthinbecker

The Finger Presta Valve Cap

Combination of two models from Thingiverse: Middle Finger Schrader Valve Cap Presta Valve Cap This is the first iteration of this design, made in a few hours pretty roughly. Threads came out pretty nice with no supports inside the valve…

Downloads
1,204
Likes
112
Rating
5
P
PrintablesNiklas

Tyre Valve to Gardena Adapter

Gardena connector to tyre valve adapter, I used the ring seal of an original adapter but you can also print one with TPU (file included). Perfect to blow the water out of garden hoses or tubes before the winter with a compressor. Update…

Downloads
1,198
Likes
366
Rating
4.86
P
PrintablesMarimo Labs

Schrader Valve Core Removal Tool

This tool can remove the valve core from Schrader-style valve stems. These are commonly found on mountain bikes, car tires, HVAC, and water rocket launchers . As this is a plastic tool, it cannot match the strength of a machined metal…

Downloads
1,171
Likes
71
Rating
5
P
PrintablesTwotone74

SUP-Valve to Schrader-Valve (car tire valve) Adapter

Deutsch Ich habe ein aufblasbares Bodyboard. Das ist gut für Flugreisen, aber die Pumpe ist zu groß um sie mitzunehmen. Deshalb habe ich einen Adapter auf Schrader-Ventil (Auto-Ventil) konstruiert. So kann ich das Board auch mit einer…

Downloads
1,109
Likes
119
Rating
4.86
P
PrintablesJosé Pedro

Brick Galaxy – Bike Valve Caps (Star-Wars-inspired)

Custom Bike Valve Stem Caps — “Brick Galaxy” (Star-Wars-inspired) Bring a little Force to your wheels! These Star-Wars-inspired LEGO-style valve caps snap personality onto your bike in seconds. I modeled a set of 7 mini “heads” and turned…

Downloads
1,067
Likes
472
Rating
5
P
PrintablesNairbF

Jeep duck valve stem

.4 nozzle .2 layer tapered hole for times when you have elephant foot I have printed it in PLA, PETG, ABS I have no idea where the file came from, I can't find the exact match on sites picked something close because printables made me

Downloads
1,067
Likes
195
Rating
5
P
Printablessh

💀 Skull - Bike valve cap

Info: another bike valve cap model I took skull base from @ncsandor (thanks for design!) and remodelled with some terrifying factors and adjusted so it match valve cap and is still printable without supports Not for presta valve! Print…

Downloads
1,043
Likes
191
Rating
5
P
PrintablesBearCubsTeacher

Valve Index Controllers: First Base V2

This is a simple, minimalistic base to set Valve's Index controllers on for storage and charging. The base measures 3.625"W x 3.625"D x 2.5"H. The correct charging cables must be used to work with the base properly. A small capsule-shaped…

Downloads
1,030
Likes
124
Rating
4.62
P
PrintablesLolloDuke97

Valve Tyre Volkswagen

Valve Tyre with Volkswagen logo

Downloads
1,005
Likes
145
Rating
4.67
P
PrintablesBootjevaarder

4 Stroke 4 Valves Over Head Camshaft Engine

General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. This single cylinder model has four valves, with an engine capacity of 30 cc. This model was designed in Tinkercad.…

Downloads
978
Likes
338
Rating
4.92
P
Printablesespinete

Presta valve tool

I have modeled this usefull bike tool. But I have modified original design to be able to use both "holes" to screw/unscrew presta valve core (see attached photos). I have tested and fits perfect, no loose. Enjoy Print instructions…

Downloads
971
Likes
77
Rating
4.95
P
PrintablesChrischi
18+

The source marked this model as adult content.

Downloads
969
Likes
66
Rating
4.67
P
PrintablesFyrby Additive

Inline Valve For 100mm, 125mm & 150mm Pipes

🟩 🟦 🟦 🟪 🟥 🟧 🟨 These models are butterfly valves for flexible 100mm, 125mm and 150mm pipes commonly used in ventilation. They are made to fit inside the pipes, and for you to clamp the pipes onto it from the outside. They print with no…

Downloads
966
Likes
443
Rating
5
P
PrintablesRob

Tyre Valve Dust Cap Replacement - Schrader and Presta + Upgrade Designs - Car or Bicycle

Made for the Replacement Parts contest. The core model is a functional replacement for Presta and Shrader type dust caps as round on most cars and bicycles. After printing check internally for any hanging plastic which could depress the…

Downloads
964
Likes
159
Rating
5
P
Printablessh

✊ Fist - Bike valve cap

Info: another hand model for valve cap Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…

Downloads
962
Likes
128
Rating
5
P
PrintablesBimmer Prints

BMW M54 Valve Spring Compressor

Version 4 added 8/13/25 but is untested. This is a simple valve spring compressor tool I designed for the M54/52 cylinder heads. I printed this in Overture PC on a Bambu Lab X1C in draft mode (0.28mm layer height) with 4 perimeters and…

Downloads
938
Likes
53
Rating
5
P
PrintablesBUDS3D

STORMTROOPER VALVE STEM CAP

STORMTROOPER VALVE STEM CAP FITS AUTO AND BIKE SCHRADER VALVE THREAD PERFECT FIT NO SUPPORTS PRINTED WIH REVO 6 .15 WITH 15%INFIL STANDARD SETTINGS

Downloads
929
Likes
103
Rating
4.83
P
PrintablesMSTVS

pinch valve powered by servo

Gary Wilson Jr. (named by GF) designed for Project “Cocktail mixer”: intended for 6 mm PTFE-Tube (might also work for smaller an up to 7-8 mm) -controlled by Micro Server 9g (SG90) printed in regular PLA Since I´m still working on a…

Downloads
927
Likes
64
Rating
5
P
PrintablesPjotrStrog

Dunlop/Woods Valve Cap

Dunlop or Woods valves are usually used for inner tubes for bicycles. According Wikipedia these valves are not common in the US and are generally found on bicycles in Europe and Asia. The thread isn't exactly 1:1 to the valve thread but…

Downloads
903
Likes
89
Rating
4
P
Printablescryptkicker

Croc valve stem cap

Decorative Croc valve stem cover. Includes both schrader and presta valve cap styles. After several test prints, found it came out best printing on it's side with some supports. Also remixed from the following:…

Downloads
893
Likes
180
Rating
4.33
P
Printablescadbury

Audi VW Intake Valve Carbon Cleaning Tool

Helps clean carbon from the valves on various VW and Audi engines. Instructions and usage pictures can be found elsewhere. Originally designed to fit a BPY FSI engine. BPY, 2.0T, S4 3.0L Fusion 360 file: https://a360.co/2XFetag Print…

Downloads
889
Likes
50
Rating
5
P
Printablessam

valve cap (universal)

This model is a universal valve cap that can be used on Schrader valves which are on cars and bikes.

Downloads
887
Likes
273
Rating
4.91
P
Printablesrbelnienk182

Bike Pump Adapter Keychain Holder | Presta to Schrader (AV to SV) Valve Mount | 3D Print – 3 Versions

Description: Never lose your road bike pump adapter again! This 3D printable keychain holder keeps your Presta to Schrader (AV to SV) adapter securely attached to your keys or bag, so it’s always ready when you need it. The actual adapter…

Downloads
881
Likes
255
Rating
3.6
P
Printablessh
18+

The source marked this model as adult content.

Downloads
868
Likes
160
Rating
5
P
PrintablesVargaMark

SUP compressor adapter for high flow, low pressure valve

SUP compressor adapter for high flow, low pressure valve. It should be printed with PETG and 4-6 perimeters. Best printed on the side with supports. It's a low pressure valve adapter.

Downloads
861
Likes
101
Rating
5
P
PrintablesJan möller

Cap for car aircondition refill valve, low pressure side

lost your cap while refilling your car aircon? just print one. This is the M8x1 R134a System Cap, 13 mm. Downside: The thread is along the layer lines but as there ist no pressure and just a dust cap it'll work.

Downloads
854
Likes
50
Rating
5
P
Printableshopefulyhuman

Valve Steam Deck Offical Model

These are unmodified files created and distributed by Valve, distibuted in accordance with the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) License. Original files available here…

Downloads
833
Likes
49
Rating
5
P
PrintablesAntipode

Sealant Funnels for Schrader and Presta Valves

Easily top up tubeless bicycle tires with sealant through the valve using these 3D printed funnels. No more spills or blocked syringes! I provide funnels for both Schrader and Presta valves. More info and Fusion and STEP files here.

Downloads
824
Likes
113
Rating
5
P
PrintablesJamie Carroll

Celtic skull valve cap

I remixed this because I didn't feel like a fff or fdm printed object would be up to holding air in as much as a nylon cap would so I cut out the threads so you can glue in a cheap valve cap. It's remixed from someone on Tinkercad ToaKame…

Downloads
784
Likes
115
Rating
4.33
P
PrintablesFranCAD

Backdraft Damper Airflow Control Valve

This model is a round backdraft (or intake) damper designed to prevent cold air from flowing back into warm air ducts, e.g. a bathroom extractor fan. It allows airflow in one direction while blocking reverse airflow. The model has a…

Downloads
780
Likes
69
Rating
4.86
P
PrintablesDani30

"Nozzle" Valve Cap (Bike, car, etc.)

This is a standard valve cap that will fit your standard bike/motorcycle/car. ONLY SCHRADER (standard), not presta (thin) valve. Printed with: 0.4 nozzle 0.16 layer height (0.2 is ok too) 2 wall count 100% infill NO SUPPORTS This should…

Downloads
776
Likes
241
Rating
4.88
P
PrintablesRePeteeMe

Respiration Mask with Filter and Exhalation Valve (Covid-19) WIP

Hi there I hope you are still healthy. Because of Covid-19 pandemic I developed this printable mask. You can print it without supports and it takes about 5 hours to print all parts if you print it with 0.2 layers and 0.6 nozzle. I used a…

Downloads
768
Likes
5
Rating
3
P
PrintablesDuane

Check Valve - Inline

I use this in a water removal vacuum device. Water is sucked off the floor into a bucket, the vacuum keeps the check valve closed. When the vacuum is turn off the bucket drains through the check valve. So it's not meant to be a perfect…

Downloads
759
Likes
77
Rating
5
P
PrintablesIXI

Skull Valvecap

Fun creation of valvecap in the shape of a skull. Standard valve for cars or bikes . PS: first picture is not mine, I made it so the valve hole is on the bottom instead, I did not have time to print it yet but picture is there as a…

Downloads
755
Likes
159
Rating
4