stavebnice moto buell xb
A simple motorcycle kit, as a wheel axle is used piece of filament
Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant
- Downloads
- 235
- Likes
- 28
- Rating
- 0
272 models
A simple motorcycle kit, as a wheel axle is used piece of filament
Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant
I had an issue with my MK4, X axis calibrations failed and I found it was due to Love board right cover was in touch with trapezoidal nut / trapezoidal nut screw during the movement to the right. I tried to re-seat it but still no…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Pour fixer sa livebox 5 au mur … Impression PETG des fois que ça chauffe ! (et aussi pour la flexibilité comme ça tient par pression)
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
I think this hinged access door is an excellent idea. But, as Marcelismus commented on the original, I found the ‘latch’ on the side of the x-CarriageBack meant the door could never be opened. I do not think the ‘latch’ is needed. So this…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
The ~26 year old ABS part MB424629 snapped, so i measured up the framents and came out with this. I printed mine on my i3 MK3S+ out of Prusament PETG with a 0.4 mm Nozzle and 0.1 mm layers i think, but i by no means optimised this. you…
Print approx. €3.96–€4.85 excl. taxPreliminary estimate for PETGSource material: PET
[EN] A simple car kit optimized for easy printing without supports. The whole car can be printed at once even on smaller printers (Průša Mini), or printed in parts from individual colours. No glue is needed for assembly, only two M3…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
Just an idea for your sweetheart. Cute little heart thing to hang on the wall. Obviously I'd figure you'd want to change the initials and the date, so the Fusion 360 file is attached. You're not me or my wife, so please modify it. Please.…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
Studenti dostali zadání, aby pomocí stavebnice kapla a výstupů z 3D tiskárny co nejefektivněji překlenuli vzdálenost cca. 1 metr bez pomoci svislých podpěr
Print approx. €10.57–€12.92 excl. taxPreliminary estimate for one variant
Vytvoření virtuálního 3D modelu vozidla, který bude upraven do podoby polytechnické stavebnice v modelovém měřítku.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Studenti si samy vyzkouší modelování a následné sestavení krovu sedlové střechy RD.
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Tired of multi-file modular organizers that take forever to sort and print? Welcome to the ultimate workspace evolution! This premium, honeycomb-inspired storage system has been completely redesigned around a single, universal outer case…
I always forget coins for a shopping cart, but I always have the keys with me. That's why I've designed this simple shopping cart token that works as a coin. It is removable so you just unlock your shopping cart with it and put it back to…
I wanted a way to hold a box of nitrile gloves to the pegboard in the shop.
Stelle hier eine Turteltaube zur verfügung, bekannt aus dem Film Kevin allein in New York. Provide here a turtle dove, known from the movie Home Alone 2: Lost in New York
The original Cover for the LoveBoard on the right side of the printhead does not fir very good and is only fastened with one screw. Sometimes, wenn the Cover shows a cap to the side of the X-Cariagge, the test of the X-Axis fails because…
Pokud se vám stalo, že se vám v průběhu hraní si se stavebnicí Boffin 100, 300, 500 nebo 750 poškodila vrtulka nebo „kříž“, na který se vrtulka nasazuje, tak si můžete stáhnout přiložený model vrtulky, „kříže“ a můžete si je vytisknout…
After many months of dealing with a taped down battery cover, I finally sat down and made this replacement. I tried to best mimic the “spring latch” on the original cover, while still thickening the overall shape to extend it's life. Many…
Sprinkle a little extra love into your Valentine’s décor with this charming 3D printed romantic centerpiece 💕 Featuring Cupid on a mission, sweet lovebirds, floating hearts, and graceful branch details, this piece is full of storybook…
Fits just like the original one does but now allows easy access to the two plugs needed for a nozzle swap. Only the body needs support and only for the hinge Hardware needed: M3nN MK4 kit should have an extra M3x12 bolt MK3S+ upgrade kit…
I wanted my modded Mini to be as clean as possible but with a possibility to store some frequently needed tools (like hex keys, nozzle wrench and spare nozzles) with it. So I came up with the idea of a glovebox style stowage device…
Note its a bit too tall to be printed on a Prusa MK3! I printed this one on CR10 Max with PETG Note it will fit the normal Nitril gloves box with 100 in like Semperguard and more in the same style box. Enjoy !
Fine details require SLA printer or 0.2mm FDM nozzle if you're good.
Just a little Wavebird controller stand I designed and printed long ago and thought I would share. It is actually a remix from a stand on Thingiverse . I just removed some of the excess area in the base to speed up printing and added the…
optimalizováno pro FDM tryska 0,4mm, vrstva 0,2mm
Vhorlath Realms – Season I The Gravebound Dread Rider is an Undead dark fantasy 3D printable STL miniature depicting a fallen knight bound to eternal service beyond death. Mounted on a cursed steed and wrapped in the cold authority of the…
Vhorlath Realms – Season I The Gravebound Skeleton Guard is an Undead dark fantasy 3D printable STL miniature depicting a long-dead sentinel raised from the silence of the grave. With rusted arms, hollow bones, and a will no longer its…
Vhorlath Realms – Season I The Gravebow Skeleton Archer is an Undead dark fantasy 3D printable STL miniature depicting a long-dead bowman raised from the grave to serve forgotten masters. Silent, tireless, and hollow-eyed, this skeletal…
Nintendo GameCube, WaveBird and DK Bongos Controller Display Shelves based on the swappable wall mount. So you can move them around as your collection grows. There is enough room behind the controller for the wire for easy storage. I…
This is an adjustable glovebox organizer for 2015–2022 Chevrolet Colorado and GMC Canyon trucks. You will need to print: 1 Top; The Full model (355mm x 194mm) is only if you'd like to cut it a different way than the pieces provided. The…
Geändertes Cover, das besser passt und Probleme beim Kalibrieren der X-Achse verhindert da das original Cover manchmal nicht ganz anliegt ########## Übersetzung des original Textes von @Stefan_106413 ########## Die originale Abdeckung für…
Print supports for the Skadis feet. For multicolor printers, I suggest you use another color for the logo to stand out more. The front could be done better, my skill are lacking to modify it properly for a better look. Most important…
This a remix of the original Prusa I3 MK4 LoveBoard Cover ( https://www.printables.com/fr/model/451501-mk4-printable-parts ). I add "PRUSA" and "MK4" text on front side and left side. I have print this part in transparent PETG (totally…
Fully functional hotswap drivebay for 2.5" SATA HDD/SSD. Compatible with usb sata adapter. Locking pin is printinplace. I made this for a larger rack-mount rpi project, so the outside dimensions don't fit any standard 3.5" or 5.25" bays.…
-= Русский =- Планка повышающая предназначена для подъема базы Weaver с целью установки оптического прицела с большим диаметром объектива, коллиматорного прицела или фонаря. Высота подъема 15мм. -= English =- The raising bar is designed…
**EDIT 04/26: I updated this model to have higher detail geometry. The Loveball version of my ball. This one may be harder to print single color, but still doable. The preview stl is just for a preview; there is a full organized list of…
Hi! I made a phone mount for my 2000 Subaru Forester, its made to fit Redmi note 11 pro with a port for charging. I don't know if it fits any other phones as good ;). Its inteference fit but some glue should be used. The mount is held…
This is the hook for the trap door latch on the storage compartment between the driver and passenger seats on the back "wall" of the convertible (roadster) model of the Audi TT MK1. There is just no good name for this compartment… it has…
Did the hook or clip break on the grocery hanger for your XC40? Just want one that holds more weight or different color? The retaining nubbin may or may not last but doesn't seem necessary anyway. Print laying on side. Wall loops and fill…
Overinflated your tires? Need to air down to get better traction off road in your SUV as you destroy fragile desert ecosystems? No problem, and no need to sit around at the tire valve letting out air. Valvebuddy has you covered. Now you…
The new gloves I got come in a bigger box, so I needed to make my previous hanger adjustable. This should fit boxes up to 80mm deep. There are holes for M5 setscrews to set the size.
Hab eine Kompakte Bogenhalterung mit Pfeilhalterung entworfen da ich keins in dieser Richtung gefunden hab. Das Schraubloch für die Montage hat einen Durchmesser von 5mm und ist gesenkt.
Bracket/hinge for glovebox on old chevy truck. Should work for 1988-1993 I believe. This bracket is towards the center of the truck, the outer part seems more robust. Recommend printing in PETG or stronger.
A quick and easy Costco Nitrile Glovebox Holder. Printed in PLA .25mm Layer height.
[EN] 3D printed small tractor kit designed for easy printing without supports. All parts are printed in the positions as they are placed in the prepared STL files. For simplicity, STL files are also prepared with parts sorted for common…
Print from TPU Infill can be modified in both ends to 100%
This model is a remix of cameronhimself 's Dual Gamecube Wavebird Controller Stand. His original design was embedded in an angular baseplate which features the GameCube logo, as well as offset to allow for storage of two Mayflash…
There are 4 Led Indicators : POWER (Main power supply) The main power LED indicates the presence of the voltage necessary for the operation of the LoveBoard, 3.3 V. H-ACT (Heatsink Fan Act) The heatsink fan cools the hotend components,…
Glovebox hinge for a 2001 Mitsubishi Galant. It may fit other Mitsubishi models. Print with hook side face down, 100% infill and support on for best results. Holes may need to have a drill run through them for the best fit. Print Settings…
After updating from MK4 to MK4S I recalibrated the printer and was again faced with an error on the X-axis. Instead of simply removing the small cover casing that issue I though to just “clue” both part together. It works fine on my…
Žáci spolu s učitelem sestaví stavebnici kalotových modelů, kterou následně budou využívat při výuce organické chemie.
2mm wider MK4/MK3.9 LoverBoard cover
Sphericon print as one solid or in two halfs with a connection pin (easier to print and movable). In the script you also find an option to use a revolving circle instead of a waveform, so you could place marbles in the halfs - but may be…
I made this drawer to keep small things like keys, parking change etc in my Audi glovebox. My car is an Audi A6 C7 2012 UK model. There is a small recess underneath to make a small handle to pull it forward. It took many iterations and a…
Design-Konzept Diese Klemmdose wurde speziell für die Aufnahme von WAGO-Verbindern entwickelt und bietet eine integrierte Zugentlastung zur erhöhten Kabelsicherheit. Verwendung Ideal für den Einsatz in Projekten, bei denen eine sichere…
Originál se nám zničil a tak bylo třeba udělat nový.
I bought few different glovebox hooks for my Tesla Model Y 2023 but they all turned out didn't work for my car. So I just had to make this one myself.
I didn't want to buy a $25 glove box shelf, so I printed @melmel's divider and modified @Ashyr_166850's drawer files to fit. For the 2024 Toyota Tacoma. If you want a more snug fit, increase only the height to a max of 65mm. The shelf is…
Small bear that is holding a sign that says love
J'avais besoin de créer un support pour la Livebox 6 de mon opérateur Internet Orange pouvant se loger dans mon local TGBT. Le support est en PETG mais se tient bien en PLA. Personnellement, j'ai fixé le support à l'aide de vis et écrous…
-= Русский =- Переходник с пикатинни на 2х45* пикатинни -= English =- Adapter from picatinny rail to 2x45* picatinny rail Category: Sport & Outdoors
I wanted to hang grocery bags in the front of my truck for the ride home from the grocery store. This works great for my 2015 Nissan Titan. I believe that it will fit 2010-2015 .
This is a remix of the "Stand for Braun hand blender (Type: HB701 ActiveBlade)" with rounded corners. It's more aesthetically pleasing (in my opinion) and the base uses less space. Holds the blender super well.
A collection of‑printed reliefs inspired by traditional woodcarving. Each piece rises softly from the background, capturing quiet emotion and sculptural depth. Clean lines, natural flow, and a calm visual presence create a modern…
Size basic brick (A1) 19,5x19,5x18mm. Tested (PLA 0.2mm random seam outer brim).
-= Русский =- Планка повышающая предназначена для подъема базы Weaver с целью установки оптического прицела с большим диаметром объектива, коллиматорного прицела или фонаря. Высота подъема 10мм. -= English =- The raising bar is designed…
support LiveBox 5 pour une pose verticale , imprimer en PLA , couche 0.2 vitesse , sans support .
Pro stavebnici CORE ONE jsem navrhl jednoduchý organizér s popisy spojovacího materiálu . Lze vytisknou v jedné barvě či barevně. Logo je upraveno ve sliceru. Ostatní barvy pomocí vrstev či jinak.Nápisy možno změnit ve sliceru. Jednotlivé…
Support livebox 6 => 183 x 183 x 8
A stylish upgrade to easily replace the stock IKEA handles. A filament swap looks great with the design. Two options: One for direct M4 threading into the handles One for M4 Heat set inserts: https://amzn.to/44sF2hU See it here:…
This is the endstop for the glovebox compartment in the pajero mk2, this is for the 98 version, not sure if the others are the same. I print on the side with supports to get the most resistance. Then you basically just slide it in the…
A replacement hinge for the glovebox for a Mitsubishi 3000GT! It's not a perfect replica, but its pretty darn similar, and yes it works just as good as a factory one. I recommend printing it on its side so that way the actual hinge has…
A Lovely Box for Valentine's day. A beautiful box to present to your girlfriend, wife, partner! The cover can little bit lifted to be rotated. I printed the cover using support (as profile attached). You can also try to avoid the support…
Simple holder to store the blender standing up (e.g. in a drawer)
At home we have leftovers from three Variant kits (https://www.kaden.cz/variant-stavebnice), so we are printing new parts for them with the kids. This second version (the first version, see…
Rápida y buena calidad
Some warriors refuse to stay buried. Others were never given the choice. The Gravebound Colossus is a towering undead warrior created to serve as a centerpiece boss monster for D&D and other fantasy tabletop RPGs. Clad in the shattered…
Fits ring size from the smallest rings (12mm diameter) to the largest rings (27mm)
this token prints fast and after you unlocked the cart you can just pull it out again and you can put it on your keychain
Part has been tested on an 87 Hardbody and appears to work well. Built with OpenSCAD, file included if you need to make any adjustments. Print Settings: Supports: Touching Buildplate Infill: 100%
Heart box with lovebirds You can enhance the pigeon pattern by changing the filament color from a height of 0.6mm. With a layer height of 0.2mm, this is the fourth layer
3D model (building kit) of my house in 1:100 scale. This is the first version (prototype in this time), which I would like to improve further over time. 3D model (stavebnice) mého domu v měřítku 1:100. Jedná se o první verzi (v…
Eine Wandhalterung für Gummi/Latexhandschuhboxen mit Pfodenabdruck. Bei beiden Modellen ist der Pfodenabdruck (und dem Modell mit Füllung noch zusätzlich die großen Öffnugen) mit einer 0,4mm dicken Wand geschlossen um den druck zu…
My glovebox shattered. This assembly replaces it with a printable version that provides a tiny bit more room and would be easy to print since it is “boxy” and not curved like the factory glovebox. Note that only one wedge is shown; you…
Stavebnice Domu/House kit
Introducing the Graveborn Gearwalker , a creepy-cute steampunk skeleton champion forged in the style of ShadowsForged3D. This undead little warrior mixes voodoo magic, stitched leather, mechanical gears, pipes, and skull charm into one…
Model of the Bumbálka mountain hut - designed and built in 1934-1935 by Robert Seifert from Jablunkov. The mountain hut is located in the Beskydy Mountains on the border of the Czech Republic and Slovakia. Due to (not very noticeable)…
Quick pop in replacement part for the Holden Crewman glovebox endstop. The rubber original ones were just destroyed. Print on side with supports touching buildplate for optimal strength. Print Settings Printer Brand: Monoprice Printer:…
Printed on a modded MK3S+ with clear PETG 0,2 layer and custom settings
CZ: Plovoucí platforma do bazénku nebo nádrže, aby se včely a jiný hmyz při pití netopil. Vytiskni si kolik hexů a spojek potřebuješ a vytvoř libovolný tvar. Spojky zacvaknou zespodu do hexů. Použil jsem PETG. Instrukce pro tisk: vrstva…
STEP file ment for old asus laptop mobo, feel free to remix and suit your needs! frint is printed seperatly for looks. internals (drive trays) ar based of of this model by Plante . only the tray and the back part is used, the front part…
Urgash Graveblade is one of the Gravefang Tribe's most relentless frontline warriors—a veteran whose weapon has sent so many enemies into the earth that the blade itself has taken his name. Urgash does not possess the authority of a…
Multi-material printing is optional and provides an attractive front with space to imbed the owner's name. I printed with PLA+ and used a brim to keep the corners fully flat. Note: This model requires a 1/8" stainless steel rod for the…
Loveboard cover merged with side Nextruder cables cover
C'est bien de cacher les LEDs qui sont un peu trop présentes, lumineuses. Mais pouvoir facilement garder un oeil dessus, c'est bien aussi. (désolé pour l'exemple d'illustration, mais c'est du “quick'n dirty”, avec un reste de filament…)