913 models
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
The clips supplied with the general car mounts don't hold well and that bothered me. Inspired by various similar holders, I came up with this version, which can be printed horizontally. The horizontal printing position improves the…
I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…
Grille aération pour tuyau P.V.C1 00 mm. Diamètre de la grille 93 mm Ext pour vide sanitaire ou autres.
This is a remix of the mount done by MarMed but I made a honey comb/hex mesh pattern in TinkerCad that I have added to the top mount in order to minimize vent blockage. The top mount is basically just keeping the Xbox from tipping and not…
Ventilation grille 200x200mm for exterior use. Must be print in PETG UV resistent or equivalent. I used this grille to hide a Ø150mm ventilation pipe. I instal an anti-insect mesh between the grille and the wall.
Connector between flexible ventilation duct and 80mm fan
Druckeinstellungen : variable Schichthöhe Stützen nur auf dem Druckbett massive Schichten Decke: 5
The file is multicolor without MMU. I printed it in PETG Prusament Galaxy Black.
Ventilation grid for tube KGEM DN110. Easy aplication. The grid has an additional internal insect screen. I used 3 perimeters.
Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA
I created those plugs to reduce the amount of heat loss during cold days while I'm not in the RV. Hence the bright color, so I won't forget to take them out while I'm inside the Motorhome. They fit snuggly into the openings. I've printed…
Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…
The car have been designed by Captain JimiPie. Please refer to this Thingiverse site https://www.thingiverse.com/thing:5547978/files. Thanks Captain JimiPIe for this very nice model. I only designed carpets and motor ventilation slots to…
Hier noch eine Zwangsbelüftung für die Elektronik des MK4 / MK4S als Zubehör für mein Druckergehäuse. Die Idee ist die nicht außerhalb platzierbare Elektronik, beim Drucken mit Zusatzheizung im Gehäuse, vor Überhitzung ui schützen. Ihr…
I created this Soap Tray in decorative style. It's easy to print model made for FDM printing with basic PLA. All colored plastic pieces are divided so you don't need to use multi-material print (check notes under FILES category). You can…
The filter is 0.4mm thick. You can customize the hole size by changing the infill % of “core_one_filter_C1” in core_one_dust_filter_C1.3mf. Install dust filter between the top panel and the vent cover. used settings; 50% infill % in the…
Ventilation grid for SDK hole 68mm with support for print Větrací mřížka pro sádrokarton díra 68mm s podporou pro tisk
I need to control the flow of fresh air to the pantry during the year. Print instructions: I decided to use PETG. Printing the model does not require any special settings. Parts list: Bolt M3x10 DIN 912 (INBUS) [x1] Nut M3 [x1] I…
Introduction Dell XPS 9700 tends to get hot when gaming, wanted some easy to carry feet to improve air circulation when needed. This part elevates the back of the laptop by ~20° I am proud of this simple piece and would appreciate your…
Easy to print, any print settings will work fine. Dimensions of the hole to be made on the door: width 180 cm, height 40 cm with an arc radius of 40 cm. Ventilation grille model for 1.8 cm thickness One tip: if you want to apply glue…
Universal Ventilation Grilles Universal ventilation grilles are designed for both standard and non-standard ventilation duct diameters ranging from 98ø to 157ø. Thanks to their integrated flexible tabs, they offer high versatility and…
Prevents ventilation to close during printing or by accident. use PETG 0.2mm layer
Glue the two parts together and replace the old one with the new one.
The grid is made in Prusa Slicer (no bottom and top layers) and can be omitted. The top part has a good fit to the bottom part due to a small rim. I printed in PETG. Only screws needed (4 x M3, 8x M4).
I added 5x3mm or 5x2mm magnets to keep the grids either fully open or fully closed, and I added a small piece to cover the small hole that was visible when the grids were closed The magnets should not be past with glue, simply tap them…
This is a case for the PI5 POE Board and C-BUS Board.
UPDATE: There is now an even BETTER version that uses a twist-lock mechanism so you don't have to bother with the magnets: https://makerworld.com/en/models/487870 UPDATE: These files have been superseded by V2!! See update notes below.…
Can be used horizontically or vertically. works with 100mm tubes.
Update 2025.02.06 Some people have reported that when they printed, the tolerances were too tight for their printer to handle. The original, now called “Tight”, version has tolerances of 0.14 mm. There is now also a “looser” version that…
Toothbrush Case with Ventilation
This Thing is a fully customizable ventilation grill that allows you to construct a wide range of ventilation outlets just by changing some parameters. Use openscad to configure it.
Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household
Did you forget to open the ventilation for PLA? Or to close it for ASA? With this handy beacon knob, you can check its status from far away! Printing instructions: 0.2mm STRUCTURAL print settings 3 perimeters base is printed with supports…
EDIT ------------------------------------------------------- 2023.08.10. On request from Chris Ondrovic added frame parts without side ventilation (holes only on front side) 2023.03.26. Added STL for Alu profiles caps. Printed from…
Air Ventilation Grille / Grid - Collection (rectangular - round) - Griglia di ventilazione misure varie (rettangolare - tonda) Dimensional measures: Hex 100mm Ø100mm 100x100mm 100x200mm 100x200mm Vertical (NEW) 125x150mm 150x150mm…
Ventilation system for 3D printer. Easy to hook to the top of opened window and connect to 100mm aluminium hose. Works greatly with QIDI plus 4 printer. Suggestion is to remove inside filter in the chamber, connect 100mm aluminium hose to…
Grid Rack Panel 1U ventilation panel cover for 10" rackmount cabinet - Pannello di ventilazione 1U per armadio rack 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025…
Sunlu S2 - pad for better ventilation. Enables faster air removal from your filament dryer.
This is the next version of 3D printer ventilation I've built for my 3D printer enclosures. The video shows how the ducting, ducting connectors and gates were installed. It also shows how I researched and designed an inline fan using PC…
This ventilation system was designed with the following priorities in mind: - space saving, you only need about 7cm of space behind the machine - don't interfere with poop chutes which respect airflow, I chose shay's variant also because…
This is a remix of the case from @regularfry . I just added some vents because the ESP32 gets quite warm when running as with the Espresense firmware. Here is the description of @regularfry , which is also true for me: I'm using these…
Ich habe hier einen Abluftadapter konstruiert, der mit einem 60 mm PC Lüfter betrieben wird. Lochabstand vom Lüfter 50x50 mm und Lochabstand zum Gehäuse 65 mm x 65 mm. Abluftanschluss hat einen Durchmesser von 60 mm Bohrungen sind 7 mm…
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
Honeycomb Grilles These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electronics cupboard of my van. They are designed to fit a square hole of size 150 x 100 mm or 200 x 60 mm and are fixed in…
After 15 years the cover plates of the ventilation slots of our Internorm windows slowly begin to crumble. With this object you can replace the original plates, the outer dimensions are identical. (Nach 15 Jahren beginnen langsam die…
Here is a 3D printable sliding ventilation grille, which is also available in stainless steel. There is also a matching router template to create the perfect cut-out for the grille. Simply screw the template to the desired mounting point,…
Another thing that came out of my ventilation system for my 3d printer setup. I needed a check valve that prevents air from the outside to come in while letting air be pushed through from the inside. I tested some off the shelf stuff but…
Vent is separated to three parts and they are joined together with M3 screws. As insect protection you can buy cheap insect protection screen, cut it and glue from inner side. For assembly you will need 8pcs of countersunk M3x10 and 8pcs…
This is an exhaust kit I designed for the Elegoo Centauri Carbon to exhaust any fumes out when printing parts like ASA, ABS, etc. Included is the following Printer to 4" Duct Adapter Printer Auxillary Exhaust Cover 4" Duct to Fan Adapter…
Ein Ersatzteil, falls das alte brökelig wird und keine Gitter mehr besitzt. Ich habe meines mit einem schwarzen ABS Filament gedruckt, da es besser für outdoor geeignet ist. Veränderungen dürfen gerne vorgenommen werden.
EDIT ------------------------------------------------------- 2023.02.08. Added step files for both covers (side, front), without text, logo, motiv… Feel free and make some nice design for your self.…
Funnel with vent tube so that air can escape from the vessel to be filled when the funnel is fully seated.
Náhradní klapky, ventilace pro Dacia Dokker. Tisk z PETG. Tisknuto na výšku.
Heizungs- /Lüftungsgitter – Ventilation Grille Deutsch: Design als Lüftungsgitter für Schreibtische oder Küchenarbeitsplatten wenn der Heizkörper überbaut wurde. Gedruckt in PETG-CF English: Design as a ventilation grille for desks or…
We needed to get rid of resin smell. Solution: growtent with ventilation setup. Prints without support on prusa xl
Parts for connecting 100m ventilation tubes. 90 and 135 degree bend adn 1 to 2 and 1 to 3 links. Orientation for print will depend on printer and you may have to experiment with support. These can be hard to print without support. See…
This adapter features an exhaust interface part that is secured by VHB tape around the exhaust vent on the back of the X1. Fastened on top of it is a TPU gasket part containing magnets. The magnets allow this part to connect with a part…
I designed this, in order to extract fumes from soldering and 3D printing directly out of the closest window. For this I use the AC Infinity Cloudline A4 duct fan. The model consists of three parts that can simply be stuck together. The…
I needed a system that allows me to quickly connect and disconnect the ventilation duct of my air conditioning to take advantage of the same ventilation duct and occasionally connect my Prusa Core One or my Creality K1C (coming soon) to…
Inspired by the Prusa Knob that was showcased on the Formnext 2024, i made a Knob for the Ventilation slots.
Why? Using the Core One's rear M3 142x66 bolt pattern, I lofted that profile to a simple cylinder for 3” & 4” hose. I wanted to keep it as tight as possible to the back of the Core One, and point it vertically (90deg). For those of you…
I have replaced the original ventilation grilles with these, as this variant is more space-saving in conjunction with our interior. Since I own a Mini+, I have divided the model into two parts. PLA works fine for me. No support.
2026 09 25 I have created a new version, this time as a paid model. I appreciate your support! IMPORTANT: Before printing, check with the laminator preview that the grid is correct. 2026-05-20 For the BAMBU ecosystem, click on the link:…
This thing was designed for use in the forepeak of my power boat. It can have many other uses regarding ventilation, ex. cover up of vent/fan holes. My use for this item is to cover 2x vent holes in the forepeak on my boat wich was made…
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…
Change log: 10/18/2023 : Corrected a mistake I made in a vent extrusion cutting too far. Updated to v11. Please re-download the fixed versions if you had the previous one. Sorry about the mistake! A set of straightforward everyday cases…
Elevación con ventilaciones para la K1 con bisagras 9/5/24 Se añadió la parte trasera de la K1, va justo para que no se levante por el movimiento del teflón Para hacer la elevación completa como en la imagen se necesita imprimir : 1…
With these designs, I'm assuming the ventilation flow with the valves in place is sufficient and not too restricted. Rev 2 goes way from the single object print and the valve floats a little better in the chamber resulting in a better…
Printed from PET-G due to higher strength and UV protection. Use string of filament as the rotation axis of the flap. fasten ends in prepared holes with a soldering iron. Jako osa otáčení je použit kus filamentu. Konce jsou roztaveny…
I've tried one or two models, but there were some overhangs and design issues, so I decided to come out with my design. Ventilation openings have cover walls in front of them and light does not leak out. Print without supports, 0.24mm, PETG
Oprava poškozených lamel u zadní ventilace Škoda Octavia 2 Po drobných úpravách pravděpodobně i pro další vozy. V případě zájmu upravím potřebné modely. EN: After minor adjustments, probably also for other cars. If interested, I will…
A simple bracket in three different sizes allows you to let the tailgate slightly open for fresh air while you sleep in the car. Moreover, the vehicle can be locked when the bracket is installed. Features Lock your car while keeping the…
Here is an adjustable blower or ventilation grille, I designed it for a chicken coop, but you can use it for other applications, hole diameter Ø65mm and M6 screw preferably with a lock nut. Enjoy ;-)
Ventilation grille 120mm built-in I created a ventilation grille to replace some old damaged grids. Conical joint. Print Info Without supports. layer: 0.2mm infill: 15-20% material: PETG or ABS for better outdoor strength maybe ASA would…
- Simple ventilation when printing, e.g. PLA, etc. - Filament overheating protection. - The lid rises by 100mm. - Use a piece of filament to connect part. - Attached with Double-sided adhesive tape. - When folded, the holder is clicked…
I want to ideally have an exhaust vent setup for the core one so here is a quick model I made to achieve this.
------------------------------------------------------------------------------------------------- UPGRADED PARTS INCOMING! I've done my own fair share of testing with this part, and I figured a major redesign might improve it a lot:…
This is ventilation air-intake adjustable grill, with uniform air difuser at ceiling level. It is built for pipes with exterior dimension of (usually) 125mm and interior of 117mm. Screw is 5cm height. Part 2 needs to be 3D-printed with…
Air grille / Ventilation grille Voronoi effect x y z 120,00 80,00 7,00 mm Additional notes If you like this design, please give me a like and post makes.
modular window ventilation (to vent room or extract air from printer enclosure) Upd : new version of "classic" window vent with wind / flow regulation (limiter or plastic sheet)
I have the honor to introduce you… Original Prusa Enclosure - Magnetic Ventilation System Tired of toxic gases? Who says that the Original Prusa Enclosure is only for fdm printing? With this mod you will be able to print with resin…
This is a ventilation cover/grille designed for air inlets, outlets, ventilation openings or similar technical applications. The outer size is 280 × 220 mm . The model includes two frame-height variants: 8 mm and 12 mm . The lower mesh…
My Spirit XS shaft outboard works great but sometime sucks in air from the surface leading to ventilation/cavitation and power loss, especially in reverse. This plate fixes that. Should fit both the Spirit 1.0 and 1.0 plus as they have…
For use with the original CORE One+ printhead cover right lever. Requires 6.4.0+ firmware. Make sure to flip the vent grille for this to work properly per the CORE One+ update instructions! A drop in replacement for the slide from the…
Instrument holder for a boost pressure display. printed with tree supports in 0.2mm and 100 infill. Mount for a boost pressure gauge with 52mm diameter. The design is not mine and was only adapted for the diameter of the boost pressure…
NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation duct to 100mm Ø duct. Orientation for print will depend on printer and you may…
Ventilation grille, e.g. for a tool shed, to prevent high humidity. Use 2 per room. One at ceiling height, one at foot level. I glued it into a rectangular cut-out and used netting to keep the insects out.
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
Ventilation grid for KG pipe 125mm. Printed with PETG infill 20% 3 perimets The grid diameter for the KG125 pipe is 117.5 mm
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Prusa MK4/MK3.9 love board cover with ventilation grill/LED…
Ventilation grille for a wall mounted hot air exhaust with 120 mm diameter. You can print the cutout template to get the correct hole size with a Dremel.
This is a mounting plate for the back of the Carvera Air. It converts it to a 32mm out. There is also a few adapter for my Vacuum. https://buymeacoffee.com/ElectricFjord I show it in my video:
Filling the bottles has never been easier ;)
CLICK HERE FOR THE ASSEMBLY GUIDE
Xtool F2 Ultra 90 degree Ventilation adapter, used on the back side fan outlet
The file is designed to be used with our 120mm Fan Mount and will replace a Top Corner piece in the desired location. The preferred printing orientation is with the circular duct on the build plate (see images). Compatible HEPA Air Filter…
Application Connect this adapter to your car vent outlet. It is sized for and extensively tested on an Audi Q5. It might fit out-of-the-box for other car models as well. I am totally willing to adapt it for other cars, if you let me know…
