Search results: weact

Sort order

23 models

P
PrintablesSubsonic8134

WeAct RP2040 Case

This case specifically designed for RP2040 module from WeAct Studio. This is bit snug fit (extra 0.30 mm length and width applied to original datasheet specifications) and before printing make sure that z-seam is aligned properly. Else…

Downloads
89
Likes
11
Rating
0
P
Printablesjbergler

WeAct 2.9" ePaper Case

This is a low profile case for the 2.9" WeAct ePaper displays sold on aliexpress . It features retaining pins to hold the display in the correct position, and a snap-fit mechanism to hold the case together. The cable is routed out the…

Downloads
336
Likes
22
Rating
5
P
PrintablesAlex

WeAct 2.13" E-Paper Module Bezel

WeAct 2.13" Epaper Module Bezel. Two versions available - one with M3 threads for mounting within something, drywall, etc., and one without. Found on aliexpress https://www.aliexpress.com/item/1005004644515880.html Printed in PLA, 0.12…

Downloads
233
Likes
26
Rating
0
P
Printablesuspeek

WeAct 4.2" Epaper case - WeMos D1 mini

Wall-mounted case for WeAct 4.2" Epaper Module. Based off this 4.2" stand by napalmz and adjusted for WeAct module in place of Waveshare one. This model should fit WeMos D1 mini (ish?) ESP8266 board fairly tight. Pictured is a generic…

Downloads
203
Likes
15
Rating
5
P
PrintablesKamil

WeAct 2.9" ePaper Case with USB-C hole at the bottom

Remixed low profile case for 2.9" WeAct ePaper displays sold on AliExpress, with hole at the bottom, for USB-C port (and not at the back, like the original model). Also slightly thicker than the original model It fits inside the display…

Downloads
188
Likes
19
Rating
5
P
PrintablesCryptoGuide

Case for Trezor DIY (0.96' Display + WeAct Studio STM32 Core STM32F405RGT6)

Software and assembly video here: Case is ideally held together by either melting with a soldering iron or just using glue. Electronics Used (Including Purchase Links) WeAct Studio STM32 Core (STM32F405RGT6):…

Downloads
73
Likes
5
Rating
0
P
PrintablesSerkan ASAR

E-paper 4.2" weact Pilot Dashboard weather station epaper

Epaper 4.2" Weact Pilot Dashboard weather station I understand my dashboard code and function may not be usable for you. But at least you may need my case parts. All the other parts have been bought from aliexpress and picked cheapest…

Downloads
67
Likes
11
Rating
0
P
PrintablesDmytro

Case for WeAct Studio ESP32 C3 Core Board

Simple Box for WeAct Studio ESP32 C3 Core Board. Board specs: https://github.com/WeActStudio/WeActStudio.ESP32C3CoreBoard

Downloads
64
Likes
1
Rating
0
P
PrintablesPetr G

WeAct 1.54'' ePaper desk clock with discreet lighting / WeAct 1,54'' eInk hodiny na stůl s nočním nerušícím osvětlením

/////////////////////////////////////// ENGLISH /////////////////////////////////////// Desk clock with ePaper display with discreet lighting and automatic time synchronization over WIFI. You need to print at least the front part and the…

Downloads
50
Likes
4
Rating
0
P
Printablesswiss01

Weather Station weact E-Paper esphome ESP32

Weather station with three WeAct displays 2.9" Controlled with an ESP32 Additionally a Zigbee repeater Programmed via ESPHome. Unfortunately the code for WeAct display compatibility was not merged. but you can download it yourself.…

Downloads
40
Likes
27
Rating
0
P
PrintablesRynok

STM32 WeAct BluePill+ Case

I wanted to add a BTT SFSv2 to my Sovol SV08, and needed additional pins to support both the motion and runout sensors than the SV08 mainboard supported. While there are alternative approaches (including wiring the sensor to the toolhead…

Downloads
36
Likes
7
Rating
0
P
Printablesdetail

ESP32-C3 Weact Enclosure

This model is optimized for a layer height of 0.2mm.

Downloads
27
Likes
1
Rating
0

Shroud for weact STM32H723 board

Protect underneat your board while you work on it ;) See The OnshapeLink , Modify as needed.

Downloads
25
Likes
2
Rating
0
P
PrintablesMartinS

Case for WeAct USB2CANFD

A small case for the USB to CAN Gateway WeAct USB2CANFD. Two different versions with zip-tie mount or plain. Fix the board to the case with a drop of hot glue. Supports advised for the cutout roofs.

Downloads
22
Likes
1
Rating
0
P
Printableseuxnas

Simple Case for WeAct LogicAnalyzerV1 (Support-Free)

This is a simple and practical case designed specifically for the WeAct LogicAnalyzerV1. It focuses on ease of use and protection for your electronics projects. Features Sleeve Compatible: The internal clearance is designed to fit the…

Downloads
17
Likes
1
Rating
0
P
PrintablesTyler Durden

Case for WeAct CH343P

Case for WeAct CH343P Category: Electronics

Downloads
7
Likes
0
Rating
0

Information panel based on the WeAct Studio Epaper 4.2 module

To connect the parts, I used brass treated insert nuts M3*3*4. I took the battery from an old Sony Xperia phone. A TP4056 Protected module is used to charge the battery. For printing, I used PLA plastic.

Downloads
7
Likes
0
Rating
0
P
PrintablesWDGadgets

Raspberry Pi Zero 2 W WeAct 2.9 inch e-ink desktop enclosure

Desktop enclosure for the Raspberry Pi Zero 2W with a 2.9" e-ink display styled after digital alarm clocks. The e-ink used is a WeAct 2.9" black-white module which is SW compatible with the Waveshare 2.9 BW V2 module, supports 4 level…

Downloads
6
Likes
3
Rating
0
P
PrintablesJosue

E-ink Desk Clock – WeAct 2.9" + ESP32-C3 SuperMini, Touch Buttons, No Screws

A slim desk clock / info panel for the WeAct Studio 2.9" e-paper module (296×128, B/W or B/W/Red), driven by an ESP32-C3 SuperMini . Inspired by Echo Show style wedges, but thinner and simpler: 104 × 34 × 56 mm. ### Features - Display…

Downloads
4
Likes
0
Rating
0
P
PrintablesDBOA

WeAct Studio 3.7 inch Epaper Module Badge

Is just a front to transform the Epaper display into a badge. (This counts as fashion right?) I used the "WeAct Studio 2.13" ePaper front bezel template" as a start, thanks for it. It's not perfectly fit yet, I'm missing a working caliper…

Downloads
1
Likes
1
Rating
0
P
Printables

Simple Case for WeAct LogicAnalyzerV1 (Support-Free)

This is a simple and practical case designed specifically for the WeAct LogicAnalyzerV1. It focuses on ease of use and protection for your electronics projects. Features Sleeve Compatible: The internal clearance is designed to fit the…

P
Printables

E-paper 4.2" weact Pilot Dashboard weather station epaper

Epaper 4.2" Weact Pilot Dashboard weather station I understand my dashboard code and function may not be usable for you. But at least you may need my case parts. All the other parts have been bought from aliexpress and picked cheapest…

P
Printables

Case for WeAct CH343P

Case for WeAct CH343P Category: Electronics