5,280 models
Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…
Print approx. €13.56–€16.58 excl. taxPreliminary estimate for one variant
Ghost Emoji Decorations! I hope you all have a spooky yet happy Halloween this year with these super cool Emoji Ghosts! Version 4 - 24/09/2023: Updated STL Files released. Added a thicker base for each 'foot' of the models, making it much…
Print approx. €7.37–€9.01 excl. taxPreliminary estimate for one variant
Halloween Mini Monster Trap >:D Print Recommendation: Material: PLA, PETG Infill: Grid Infill → claw holder (100%), all other parts (20%) Perimeters: 4 Perimeters Supports: No supports → With the exception of the plate! (Support on build…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Description: Wanted to create cutout like bats decoration similar to the ones I had as a kid, however not being made out of construction paper. There are 3 different bats that I drew then made into STL's. So the edges aren't perfect,…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
I designed these earrings as a tribute to the movie Scream. I created 2 different sizes and one with the black hood and another which is a plain version. If you enjoy my designs, please consider a donation: https://paypal.me/melix3d all…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
This is a danman's remix Halloween Crow. I printed this in Prusa Galaxy Black PLA. Head is separated into two pieces. There are prepared holes for 5mm diameter LEDs and also CR2032 battery holder is included. Head is glued by two small…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest design:…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Print approx. €25.42–€31.07 excl. taxPreliminary estimate for one variant
Print without supports, add sticky googly eyes, enjoy !
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
We were still missing a child-friendly but spooky little house in the shape of a coffin for our Halloween decorations. It is perfect for two LED tea lights so that the windows are illuminated in the dark for a great atmosphere. The new…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
dekorace k vytvoření duchařské atmosféry
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Hello there folks. I wanted to share with you our newest model of pusheen pumpkin cat :) Specs : Print with 0.2 layer height That's all folks :) Print Using MMU3 or AMS
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for one variant
I designed these bats to arrange a scary spider web on a lamp in the living room. I prepared the web with strings and hung the bats and a creepy 25 cm spider. Bats Dimension Bat 1 - 160x74x5.5 mm Bat 2 - 160x85x5.5 mm Bat 3 - 160x76x5.5…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
Halloween Pumpkin Nightmare
Print approx. €2.16–€2.65 excl. taxPreliminary estimate for one variant
Spiral Mode/Vase Mode You can print it with: Nozzle 0.4/0.6/0.8mm (You can print 0.8mm line width with 0.4/0.6 mm nozzle) Layer Height 0.2mm/0.4mm (Recommended) Bottom Layers 4-10 Layers Scale it as you like :) happy fall season
Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant
Flipped Buhler's print in the X axis so the final product has the nice texture of the print bed facing the viewer rather than the topmost layer of the print (which always has nozzle scratches). Also scaled to 125% then rotated to still…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Goku in Halloween in Fox Costume. Added Goku2.3mf and associated gcode on 8/30.2023. overall .4 offset with extra .6 offset at base of tail. From: Dragon Ball FighterZ. Added deep UV Textures.
Print approx. €20.82–€25.44 excl. taxPreliminary estimate for one variant
Description: I created some bat decor, after that I realized they were missing a witch! So I created two witches, one being the traditional “hag” witch with a long nose and chin and crazy hair and what I would call a just a witch with…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Vampire Teeth – 3D-Printed Halloween Accessory Perfect for your vampire costume: these lightweight, reusable vampire teeth are 3D-printed and, with PLA Glow , deliver a spooky glow-in-the-dark effect. Easy to print, quick to assemble, and…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Pumpkin lamp for table decoration e.g. on Halloween. !!Attention only use with electric tea light!! The tea light I use is 45mm by 45mm by 45mm in dimensions and fits easily. Works absolutely great and looks great. I uploaded two variants…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
We designed these for our ear shop at VistaSistas.com . Then we realized the Mickey Mouse outline was trademarked, and we couldn't sell them legally. Luckily they are totally legal to print for yourself! We printed these with Polymaker…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
🛠 Materials & Hardware: PLA Combo Black & White -> [ https://amzn.to/4t0FgJ4 ] PLA Overture Orange - > [ https://amzn.to/4n2pegj ] Other Designs in the Collection:…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
ozdoba ucha, dle potřeby možno vytvarovat teplem
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Introducing the Halloween Spider/Skull Coin , a versatile and fun 3D-printable coin. It uses very little material and can be great for giving out at Halloween or use for your pirate booty! Printing Notes: Recommended print resolution: 0.2…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Ein sporadisch und einfach gestalteter Halloween-Kürbis. Man kann innen ein elektrisches Teelicht reinstellen. Kleine aber feine Halloween-Dekoration.
Print approx. €9.44–€11.54 excl. taxPreliminary estimate for one variant
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
A full moon hangs above the Prusa Research HQ like a… huge hanging thing in the sky. And at those times, when the moon is full, Zombie Jo and his army get really hungry. What are they after? Brains? Print instructions Material: PLA…
Print approx. €5.42–€6.63 excl. taxPreliminary estimate for one variant
Add more slots to your Minimal Stand with this divider. The Divider is 5mm thick, please adjust the peg's length accordingly. Prints Settings: Supports: Tested with no support. Layer height: Tested with 0.2mm. Infill Pattern: 3D…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
This 3D model is a pumpkin-shaped flower vase, ideal for festive Halloween decoration or general decorative purposes. The design blends modern and festive styles, making it perfect for adding a unique touch to any space. No supports…
Print approx. €9.75–€11.91 excl. taxPreliminary estimate for one variant
Fun way to keep your wine glasses from getting mixed up at a Halloween party. these can be printed in different colours as well. The metal rings are from amazon Enjoy!
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
As a kid we made this with a matchbox and some cotton and ketchup.. This one is fancier ;) It consists of 3 parts: coffin and lid printed in 1 go. An inlay cushion is optional (works best in white) Works on my printer (MK4S) Love to see…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
You can use this scary giant spider to prank your friends or family on Haloween. Insert this 2d spider to lamp shade , and prank somebody! Print takes around 5 minutes . I recommend to print at 0.10 or 0.15mm layer height. Did you prank…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Mini pumpkins for decorating the table including a decorative storage box that can also be used as a lamp (with an electric tea light). The mini pumpkins, the inlay and the bowl are PIP and can be printed without supports. The lid must be…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Hello, Here is a Halloween Grim Reaper giving the middle finger. The figure is beautifully detailed—it's both amusing and spooky :-D. Spooky for Halloween, yet funny too. Suitable for dioramas or display. The size can be adjusted in your…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for one variant
Lithophane mug shot of all the horror characters by year. Enjoy!
Print approx. €1.35–€1.64 excl. taxPreliminary estimate for one variant
РУЧКА ХОЛОДИЛЬНИКА. РАССТОЯНИЕ МЕЖДУ ОТВЕРСТИЯМИ 238ММ
Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant
Hello, Today I have a Halloween stain as a coaster for you. Ideal for a Halloween dinner table. I used PLA/PETG as the material. No need to use supports!!! If you are interested in my work, the links are here:…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Have some scary good fun playing tic-tac-toe this Halloween! 15% infill is definitely enough, and paint it to your heart's content. The 3mf's are pre-painted with orange and black for the board and pumpkins, while the ghosts are white and…
Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant
Halloween decoration.
Print approx. €6.27–€7.66 excl. taxPreliminary estimate for one variant
https://www.rcsb.org/structure/1aoi
Print approx. €7.37–€9.01 excl. taxPreliminary estimate for PETGSource material: PET
I made two Versions: One with a Background, and one with a hole in the middle. Each Version is also available with a Switchable Sign to indicate if the Toilett is Occupied. I added a German version and an English Version of the Indication…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
A ghost I made for the QUBE 500 contest that can attach to the case for decoration year round or to get into the Halloween spirit. I printed the ghost at 0.2mm face down (33m print time). I added supports and they came off cleanly. Could…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
For our little fir tree we needed a halloween custome! ;-) I used the multicolor functionality of my Prusa XL printer.
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
I have been looking for the right halloween decorations. I found this one where the lid fits better with a brim that almost locks the top onto the bottom. I wanted to add a green stem and doubling in size.
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
All you need for this are: 2x Cablemount 1x Elongated saucer for flower boxes(Like this one) After printing, clamp the holders between the two tables, and then you can put the saucer between them as in the photos. The saucer is stable…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
Design, Function, and Customization This is the MindCubby Snap-Frame , a modular framing system designed for creating custom 3D scenes on your desk or shelf. This initial release features a fun, spooky Halloween Ghost scene with two…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Decoracion para Halloween
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
A spooky ghost which fits an electronic tea light. Based on my original Ghozty design from last year. The model is 117 mm tall and 90 mm wide and is hollow with thin walls to save on filament and to allow the tea light to shine through…
Modern Halloween Pumpkin decoration. The model is 90 mm tall and 123mm wide, the standard model can be scaled up to your liking and scaled down to about 75% and still print fine and fit a standard electronic tea light. I also included…
I present to you the first in a series of Halloween pumpkins . It’s going to be scary, it’s going to be creepy. It’s going to be fun :) This one is hollow inside and has a removable top so you can place a light source inside. For the…
Introducing 'the Cute Halloween Bat,' an easy-to-print (even without supports) little darling to add some charm to your Halloween. Just take a look at that adorable face and those cute ears. He may be small, but he has a big heart and…
The original Halloween series designed by HardPrint co. is released! Original super cute design, without support and easy to print. This file is not for commercial use. If you need commercial use, please contact us for license.…
UPDATE!!!🎃🎃🎃 You can now download a new version of witch hat: MadEye Hat! Downlaod from HERE Pumpkin Venom - No AMS is LIVE NOW! Patreon.com/DraftAxis for EXCLUSIVE content and COMMERCIAL license ✨ Meet the Grumpy Witch Hat! 🧙♀🎩 This…
Download below the entire cute kitty collection available for free for everyone! The collection contains 3 styled kittens with their own Halloween inspired counterparts - Vamp cat, Mummy kitty & Witch kitten. Complete with Bambu studio…
Ein kleiner Kürbis zur Dekoration oder als kleines Geschenk, mit einem kleinen Loch im Stiel zum Aufhängen. Für den Druck benötigen Sie keinen Multi-Extruder, da Kürbis und Stiel separat gedruckt werden. Um den Stiel am Kürbis zu…
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
Spooky season is coming so I decided to make some Halloween Pumpkins. This is the fourth one I decided to put on printables, but there will be more in the near future. This pumpkin is designed to be used with leaf( for extra cuteness) but…
This 3D model features an adorable ghost, perfect for Halloween decoration. With a cute, kawaii design, this small ghost adds a friendly and not-so-scary touch to any Halloween setup. Easy to print and customize, this ghost is ideal for…
Halloween Grim Reaper Duck 2 Color AMS, MMU or, ACE Pro Commercial License Membership Available in Bio
Description Halloween Flexi Dino with Pumpkin Add a touch of prehistoric magic to your Halloween with the Halloween Flexi Dino! This adorable flexible dinosaur is wearing a witch’s hat and holding a glowing pumpkin, ready to enchant…
Printing time is about 22 minutes with a layer of 0.2. This is enough to create the effect, but you can print smoother too - 0.1. On my photos and videos, printing was carried out with a thickness of 0.2. Any opaque plastic can be used…
This candy bowl comes in two sizes. The largest one is designed to print just within the size limit of a Prusa i3 MK3. Use super-glue to secure the stem in place. Grid supports are recommended. There have been some reports of tree…
Enjoy my work? Find my full collection over on Patreon I modeled three little tea light ghosts for some Halloween decorations. The middle finger model needs supports under its mouth, but the other two can be printed with no supports. I…
Modeled off a black house spider, this easy to print spider is perfect to freak out that loved one of yours. Update 31/10/22 200% version for all. Black House Spider now has hats spider: hat normal version is square bottom and normal…
Cute spider on a web in the corner on his print-in-place web. Space for (4) 12mm (1/2") magnets to stick to a metal door frame, or just tape/command strip in place. Mine also stuck to the metal corner beads of unframed openings at my…
Ghost for Halloween decoration
Here is a LEGO-style lantern designed for LED candles, created as a Halloween decoration. Feel free to check out my other models. Halloween is coming! Przedstawiam latarnie na "świeczki LED" w stylu klocków lego stworzona jako ozdoba na…
I started with just the angry ghost earrings version. But I wanted to have some more options so I've added those too. If you are missing a variant, please let me know in the comment section! Dimensions (hwd in mm): 24.95 x 25.65 x 1.3…
I've creared this cute little tree stump with the halp of AI, watch the full process here: Just print the tree with normal supports and the candle cover upside down without support. Than a normal battery powered candle light should fit in…
Before attaching the plate to the wall, first screw the hand onto it. Make a small mark on the underside of the panel so that the hand is fixed in the correct position later. I have added a pin in case you prefer to have your hand come…
Pawn, rook, knight, bishop, queen, king
Halloween cookie cutters Please don't change the size in the slicer. If you change the size, they will not have a thin cutting edge (0.4mm). Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution: 0.2 Notes: Print…
Giant Vase Spider - posable halloween print in vase mode! Big size (40cm and up to 90cm), nice finish, low material (only around 110g) and low time! If you like it --> press like it :-) License & Usage Free to download Private use only If…
Tall Pumpkin for halloween decoration. The model is 160 mm tall and 84mm wide. The body and stem are seperate bodies to make it easy to print in two colours, you can simply glue the stem into the pumpkin body. The inside of the model is…
Simple Happy Halloween table top decoration featuring a cat, spider, and bat on a spooky tree. Designed for color swaps to spice it up if desired. Spider and other details print better if you choose "external perimeter first" of…
Presenting a 3D model of a majestic, wing-spread Raven, ideal for Halloween! This elegant bird is incredibly easy to 3D print, and you won't even need any supports. It's a fantastic decoration choice that combines simplicity with spooky…
We’re kicking off this year’s Halloween season with a cute little ghost. The model is simple to print, requires no supports, and is compatible with an LED tealight or a small light source that can easily be placed inside. The model has…
DESCRIPTION Unleash a spooky atmosphere this Halloween with this creepy candle holder! Add a flickering LED light and turn your house into a haunted forest. The design is made for 3D printing and needs no support! The tealight holder…
The source marked this model as adult content.
Halloween hanging. Added a ghost and adjusted the hanging point to the center of gravity. Should hand straight now.
Overview This is my second version of the Ring Lamp. First version is available here: https://www.printables.com/model/929809-ring-lamp In the beginning I wanted to change only a base and add some new Halloween panels in the Ring Lamp but…
JASON, never die! Rafts: NO Supports: Yes - TREESUPPORT in Cura oder Custom Supports Nozzle: 0.4 Resolution: 0.16 - 0.28 Infill: 10% Walls: 2 Die Streifen für die Maske mit Haarföhn oder Feuerzeug vorsichtig erwärmen, und mit Kleber an…
Here is my second design for everyone! This one has the commercial license on as promised! Spooky spider web for your doors! Even has a little spider friend(Fred) hanging out! If you have any ideas on how to improve let me know! Also when…
[Updated 2024-10-26: Updated to unbranded design.] [Updated 2024-10-29: Note: I found out PETG articulates smoother than PLA in this design] Notes: Articulated Bat's wings fold forward plus the head moves Printing: I printed with 0.4noz,…
https://paypal.me/radicalreel Remix of MerganMcFergan's Gizo the spider. I'm not a fan of rafts so i made a Brim which is only partially conneced. I added slight support too source: www.thingiverse.com/thing:5044727
Used Poly.cam to scan a floral detail Halloween themed skull. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…
Halloween Ghost made from a Blender cloth simulation! Great for decorating your home for Halloween! The inside is hollow, allowing for an electric tea light to sit inside the ghost! Works with electric (fake) candles - DO NOT USE real…
Halloween is getting very close now! We decided to put out another awesome new release: Day of the Dead Halloween Pumpkin , lantern version. If you sign up on our Patreon for FREE you can enter our SEREV3d Halloween 3d print Contest , and…
Inspired by "Ghost by Desktop_Makes" wonderful ghost, here are 13 Halloween Ghost decorations that contain an LED tea light in the base. Print Settings Printer: Troodon Rafts: No Supports: No Resolution: 0.3 Infill: doesn't matter…
This model is a perfect addition to you yearly festive decorations, it can be scaled up as much as you want and is perfect for butting an electric tea light inside of. WARNING: do not put real candles inside because they might set the…
Meet the spookiest duck in the pond— Halloween Duck ! Eerie, playful, and ready for some frightful fun. With its pumpkin-inspired design, stitched-up details, and cracked surface, this duck brings the perfect blend of Halloween and…
The source marked this model as adult content.
Booenchy, the Halloween Ghost Benchy. You can even put this costume over your Benchy and transform into a hilarious and haunting specter. With draped cloth and perfectly placed eye holes, Booenchy captures the timeless charm of a classic…
The original Halloween series designed by HardPrint co. is released! Original super cute design, without support and easy to print. This file is not for commercial use. If you need commercial use, please contact us for license.…
Evil Spirit Halloween Duck 2 Color AMS, MMU or, ACE Pro Commercial License Membership Available in Bio
![Minimal Stand's Divider [Add-On] - Tablet, Laptop, Books and Anything In-between.](https://media.printables.com/media/prints/1108868/images/8378877_56cbc877-f33b-4c54-9190-9f20b125a5dc_f708f62b-26d7-4a66-a02a-6a56b3b9d8ee/divider-render.png)
