Search results: wer

Sort order

37,938 models

P
PrintablesTronnic

All in One Temperature & Bridging Tower - PLA & PETG GCode included

A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…

Downloads
85,672
Likes
4,724
Rating
4.83
P
PrintablesPaul

Under Desk Drawer

Also check the model out on MakerWorld for BambuLabs printers print-profiles! Update 6th May 2023: Thanks for the great feedback everyone that downloaded and made this model! I finally had time to make a new version. I've added a few…

Downloads
58,165
Likes
22,104
Rating
4.91
P
PrintablesLR3DUK

Fast-Printing Modular Drawer System (Vase Mode)

Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…

Downloads
48,007
Likes
19,525
Rating
4.83
P
PrintablesSASSy Design

Gerometric Origami Flower Pot and Planter for Plants

Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!

Downloads
43,680
Likes
11,331
Rating
4.97
P
Printablesrorys3D

Sunflower fabric coaster

Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…

Downloads
40,796
Likes
10,500
Rating
4.94
P
Printablesfuchsr

Improved All-In-One Temperature and Bridging Tower -- Hi to Lo Temps, PLA/PETG/ASA/TPU/PCCF

Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…

Downloads
37,547
Likes
5,602
Rating
4.91
P
PrintablesKryštof

Temp Tower PLA, PETG, ABS/ASA for Prusa MINI+, MK3S+ and MMU2S

Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…

Downloads
34,681
Likes
2,168
Rating
4.9
P
PrintablesBODY3D

Flower Fidget

If you are stressed, this is what you need ! Well even if you're not, you need it too haha The Fidget Flower ! A really cool Fidgettoy to have in your hands And of course it prints perfectly without supports Try it! IMPORTANT : If you…

Downloads
28,895
Likes
2,547
Rating
4.88
P
PrintablesArs Moriendi 3D

Desert's Kiss - Diorama Dice Tower

A detailed dice tower that can serve as a decorative diorama on its own. Prints completely support free. Happy printing! :) You're welcome to visit our shop at https://arsmoriendi3d.com/ Print instructions Print with your preferred…

Downloads
27,178
Likes
5,652
Rating
4.98
P
Printablesblove

Modular Hydroponic Tower

Complete list of parts and 3d models used to create your own Hydroponic Tower: https://kit.co/AllYourTech/3d-printed-hydroponic-tower-suggested-parts Today i'm putting together a 3d printed modular hydroponic tower garden. It's an…

Downloads
24,593
Likes
4,179
Rating
4.89
P
Printableskwik

Temperature Tower ready gcodes (ABS, TPU, PLA, ASA, PETG,)

Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…

Downloads
16,960
Likes
494
Rating
4.9
P
PrintablesGSX07

Temperature tower

This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…

Downloads
16,108
Likes
351
Rating
4.8
P
PrintablesSpinname

Temp Tower + Explanations

Here's how you have to set in Prusaslicer to test the temperatures. https://www.youtube.com/watch?v=uVaJpcBTCgQ&t=4s The tower is divided into distinct blocks or levels, each marked with the corresponding temperature. Allows observation…

Downloads
15,048
Likes
406
Rating
4.91
P
PrintablesSASSy Design

Tradicional crystal - Pot and planter for plants and flowers - vase mode print

A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D

Downloads
12,596
Likes
2,940
Rating
4.96
P
PrintablesdePrintinator

Contemporary Dice Tower/Storage v2

Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment…

Downloads
11,277
Likes
3,664
Rating
4.91
P
PrintablesCelta

Temp Tower (Fast)

I wanted a temperature tower that was fast as most of the models would take several hours. Found this model by spiga76 , changed the PLA model a bit to go from 230-190 instead of 240-200 and added labels for filament types. Printing For…

Downloads
10,440
Likes
606
Rating
4.9
P
PrintablesDJGummikuh

Stringing Test / Temp Tower

Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…

Downloads
10,016
Likes
182
Rating
5
P
PrintablesPrint-3D

Speed tower - test your maximum print speed

I needed a calibration model to verify my maximum print speed without sacrificing too much quality. Made a quick one and it works pretty fine in my opinion... Basically it is a cube with chamfers, sharp corners, a hemisphere and…

Downloads
9,776
Likes
477
Rating
4.76
P
Printablesrorys3D

Power switch adapter - CORE One/+

This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…

Downloads
9,342
Likes
1,640
Rating
4.95
P
PrintablesSASSy Design

Cactus Flower Pot Planter for Plants

A nice and quick pot/planter for your lovely plants! they will love it We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing!

Downloads
8,920
Likes
2,247
Rating
4.97
P
PrintablesPrusa Research

Extruder linearity correction calibration tower

This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA

Downloads
8,344
Likes
686
Rating
4.88
P
PrintablesThreeD-Michael

Shower Head Holder

Sturdy shower head holder, easy to print and easy to mount. There are versions for shower rails with a diameter of 18, 19, 20, 22, 25 and 28 mm, please select the appropriate 5 files. How to print: To create stable threads, I recommend…

Downloads
7,244
Likes
1,117
Rating
4.96
P
PrintablesObe_Design

Shower Drain Cleaner / Snake - Hair Remover Tool

Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…

Downloads
7,153
Likes
1,827
Rating
4.9
P
PrintablesFlyboyEUC

Collapsible Dice Tower

This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…

Downloads
6,450
Likes
1,416
Rating
4.89
P
Printablesdjedje_zr7

Side drawers for PRUSA MK3 I3

A side drawer for Mk3 I3 Edit 2021-01-29: Add the file for the left drawer. Edit 2021-02-01 : Addon to make it easier to assemble (nuts_helper_tool) Edit 2021-02-02 : Add No support drawers with 45° handle (files have 45d in name) Edit…

Downloads
6,013
Likes
2,282
Rating
4.95
P
PrintablesJerrari

GEN2 Gridfinity Drawers - STANDARD (LEGACY)

Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…

Downloads
5,718
Likes
3,102
Rating
4.93
P
PrintablesMiniWorld3D

Eiffel Tower - Paris , France

🇫🇷 Bienvenue à Paris! Welcome to Paris! The Eiffel Tower in Paris has become a timeless symbol of romanticism and " la vie en rose" . It is not only an icon of the city, but of all France and also our representative of Europe in the…

Downloads
5,566
Likes
566
Rating
4.91
P
PrintablesConr8r

Upgraded Modular Hydroponics Tower - More Compact & Stable

Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…

Downloads
5,381
Likes
1,548
Rating
4.89
P
PrintablesJerrari

LEGACY - GEN2 Parts Drawers

JERRARI3D.com The Gen2 Parts Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes. These parts drawers feature divided…

Downloads
5,351
Likes
1,966
Rating
4.98
P
PrintablesGut Shot Games

StageTop Dice Tower

The StageTop Dice Tower is a free sample from our crowdfunding campaign for StageTop: The 3D Printed Gaming Table . While made to work with StageTop Gaming Tables, this Dice Tower can also be used by itself and is guaranteed * to improve…

Downloads
5,284
Likes
656
Rating
4.94
P
PrintablesDerDave

Temp Tower PLA Prusa Mini+

This temp tower will start at 230 degrees Celsius and will end at 190 degrees. It's better to print with a higher temperature at beginning and go lower. I added a new file with temperature from 230 to 200 degrees. You can use this file to…

Downloads
4,963
Likes
270
Rating
4.97
P
Printablesfifindr

Rose Flower Decor

🌹 Rose Flower Decor – A sleek and timeless rose, perfect for romantic interiors, gifts, or seasonal setups. Use tree supports on build plate + fuzzy skin on outer walls. ✅ Height: 150 mm – classic & elegant ✅ Part of my ornamental flower…

Downloads
4,922
Likes
482
Rating
4.78
P
Printablesgeektoybox

Temp Tower PLA/PETG/ABS/ASA for MK4

Please don't forget to like the model if you find it useful. Thanks!

Downloads
4,894
Likes
293
Rating
4.83
P
PrintablesPrusa Research

Homing Tower

On the Original Prusa XL , adjusting the belt to the optimal tension is crucial to achieving good quality on the prints. Here is a detailed guide .

Downloads
4,852
Likes
157
Rating
4.68
P
PrintablesMitch

Temp tower(ready to go)

Sliced at .2 mm (Quality) profile. temp change will happen, you dont have to do anything.

Downloads
4,632
Likes
171
Rating
4.65
P
Printables3D servis

Flowers Slide Hair Clip

I recommend heat, bending and curving the flower piece a bit for easier fit. My next hair clip. Previous Bee & Honeycomb Slide Hair Clip is here

Downloads
4,632
Likes
1,541
Rating
4.82
P
PrintablesSASSy Design

Techno Error Virus - Pot and planter for plants and flowers - vase mode

Advancent error planter or pot fo your plants. The main idea for the structure comes from a great and lovely designer here - Extrutim - He was so kind to allow me to turn it into a pot design (once again big thanks for that!!!)…

Downloads
4,565
Likes
1,288
Rating
4.96
P
PrintablesVC Design

Strongest Shower Door Hook

Strong shower door hook for all your towels and accessories :)

Downloads
4,375
Likes
1,217
Rating
4.87
P
PrintablesDIY Machines

How to make Desktop Neon Signs - 3D Printable, Battery or USB powered & Dimmable!

Please take a moment to like this project and download it from Printables - it really helps me out! Thank you Today we’re making some of these awesome customisable desktop neon signs. These ones can be powered by either a USB cable or 4 x…

Downloads
4,373
Likes
1,609
Rating
4.93
P
PrintablesCalebTimoteo

LEGO Flowers - Home Decoration

Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :) Higher Poly by Noah1794:…

Downloads
4,274
Likes
2,325
Rating
4.76
P
PrintablesBennet Peters

Under Desk Drawer

Info I designed this drawer so that it perfectly fits on my Prusa MK3S+. If it doesn't fit on your printer you can just scale it down (or up). It has a smooth sliding rail to give you perfect access to all your stuff currently lying…

Downloads
4,202
Likes
914
Rating
4.93
P
PrintablesDaHouzKat

Dice Tower

Print in Place No Support Compact Folding Dice Tower Box Be advised, this model is not suitable for large D&D dice, you should instead print the bigger and easier to print Dice Tower if you plan to use it with D&D dice Compact Folding…

Downloads
4,120
Likes
724
Rating
4.84
P
Printablesdroidik

Prusa Mini retraction tower (PLA, PETG)

1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator

Downloads
3,912
Likes
128
Rating
5
P
Printables3D Printy

Dracula's Tower Puzzle Box

A tricky tower with a secret compartment and modular maze. https://youtu.be/VesEei_Eg8Y Printing No supports required Add a brim if curling or bed adhesion is an issue Requires accurate printing within +/- 0.2mm, or sanding may be needed.…

Downloads
3,780
Likes
1,398
Rating
4.94
P
PrintablesCodeName X

Shoe organizer_Less Filament. More Power. Fits All shoe Sizes.

<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…

Downloads
3,536
Likes
1,114
Rating
4.9
P
PrintablesPeter Farell

Wicked Skull Dice Tower.

Wicked Skull Dice Tower. (UPDATED) UPDATED FILES: 4/28/2024 5:28PM CMT. NamingConvention: skulldicetowerfin (OLD FILES REMOVED) Thanks for your Input Raptor King. This is why I adore this community. Awesome feedback. New uploads have…

Downloads
3,401
Likes
1,136
Rating
4.92
P
PrintablesJonas

Dice Tower - 2026 update

Can be printed as is, without supports The design itself is based on the model by Juliuis3E8 on thingiverse. Main difference is that my design is a single piece print and I added some minor tweaks (like the windows) and an extension of…

Downloads
3,336
Likes
343
Rating
4.97
P
PrintablesPeter Farell

Bowswer Spikey Shell

Bowser Spikey Shell. Updated: 1/1/2024: Also removed piggy bank version. May or may not put up a new piggy bank version.

Downloads
3,305
Likes
1,274
Rating
4.62
P
PrintablesRxR

Modular Dice Tower Castle Stairs

"Building a tower is an art. Building the tallest tower is a masterpiece! Take it from a wisard." - Saruman the White - Here's a remix of the fabulous "Dice Tower Castle Stairs" by Squinn , for players who want to touch the sky (or for…

Downloads
3,106
Likes
791
Rating
4.87
P
Printablessquinn

Flower Hair Pin

A fun little flower at a cute size (under 5 cm in diameter) that can be used as a hair accessory by sliding a standard bobby pin into the provided slot. This is a quick and easy print (no supports required), and comes in at under 6 grams…

Downloads
3,098
Likes
568
Rating
4.92
P
PrintablesFlyingT

Compact PETG Temp Tower for Prusa MK3/S/+

Pre-Sliced the Temp-Tower with the Standard PETG Profile in PrusaSlicer and added the temperature changes accordingly. USE THE .GCODE ONLY IF YOU HAVE AN PRUSA MK3, MK3S or MK3S+ IIT HEATS UP TO 160° FOR BED LEVELING, FINAL TEMPERATURE…

Downloads
2,914
Likes
75
Rating
4.6
P
PrintablesPeter Farell

Flower Crown

Flower Crown. Enlarge or shrink as Needed. Made it thick enough to shrink a bit. (flowercrown5 and 6) Still not thick enough Tested with organic supports. Worked well. Added Flowercrown.obj/.3mf and new gcode for a thicker version.…

Downloads
2,914
Likes
948
Rating
4.33
P
PrintablesSASSy Design

Spiral flower pot/planter - vase mode

A very nice and modern indoor or outdoor flower/plant pot - easy to print in 2 or 3 layer vase mode. Your plants will love it! Happy printing! :)

Downloads
2,866
Likes
452
Rating
4.95
P
PrintablesPeter Farell

Dragon Dice Tower

Dragon Dice Tower. New Version is Up. (11/12/2024) 2:13 PM (CMT) fixed bottom, enlarged exit door, and added dice ramp.

Downloads
2,847
Likes
686
Rating
4.43
P
PrintablesTechromancer

Modular Dice Tower

Modular Dice Tower Print instructions .1 Layer height, 35mm/s. Filament PM Galaxy Silver. 65+ hours

Downloads
2,822
Likes
478
Rating
4.81
P
PrintablesDaHouzKat

Dice Tower

Features Bigger, Better & Easier to print Each part can be printed individually The long bridge can be printed using support This is an updated version of my previous Dice Tower Be advised this model may be hard to print Your printer must…

Downloads
2,693
Likes
674
Rating
4.82
P
PrintablesJonesSepp

Dice Tower

I use this dice tower to clearly distinguish the dices from each other (e.g. left: number of turns, right: action to perform). The tower and the two cases are both easy to print. I used PLA with a layer height of 0.2mm on a 0.4mm nozzle.…

Downloads
2,637
Likes
815
Rating
4.7
P
PrintablesSASSy Design

Diamond Planter & Pot for plants and Flowers - Vase mode

An Art deco ispired planter or pot for plants. Best to print in vase mode (can be single or dubble layered - depends on the size) Happy printing! :D

Downloads
2,623
Likes
679
Rating
4.95
P
PrintablesSkanderberg777

Temp Tower PLA Prusa Mini Starting high to low temp

Thank you steveleader for making this and available to us. I just swapped the temperature sequence, because starting with 190°C got my print get knocked off. Important: when importing the 3.mf file, copy the Before layer change G-code and…

Downloads
2,622
Likes
112
Rating
4.83
P
PrintablesGreaseMonkey

Mac mini M4 Power Button

A small power button for the 2024 Mac mini M4. Just push the base gently into the fan slots. This keeps it attached without the need for tape or else. Commercial use is prohibited, this also includes the photos.

Downloads
2,549
Likes
220
Rating
4.93
P
PrintablesmiXal

Eiffel tower keychain

Model was found on ameede.net I removed the thin membrane on the first platform using the negative volume box in the Prusa slicer. Otherwise, it is an original model printed on a Prusa MINI with a 0.25 nozzle using Prusament Premium PLA…

Downloads
2,514
Likes
179
Rating
4.67
P
PrintablesRobertusMaximus

Greebles Part 2! Lights, Power units, Vents, Ladder, Control units and more!

Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…

Downloads
2,319
Likes
476
Rating
5
P
Printablessteve457

Milwaukee M18 Stubby Nozzle - FUEL Blower Model 3017-20

This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…

Downloads
2,310
Likes
208
Rating
5
P
PrintablesTommy Zero

Mini temp tower

Filament length Less than 3m Filament weight Less than 7g To save filament and time, the smaller the temperature tower, the better. 280~235℃ for ABS,PC,PETG 240~195℃ for ABS,PETG 220-175℃ for PLA,TPU The model is small, but the…

Downloads
2,243
Likes
107
Rating
4.93
P
Printablesgalvanicky

Simple shower hook

I needed simple hook for towels and other shower accessories. You can change the height of glass in attached .f3d file.

Downloads
2,218
Likes
668
Rating
4.98
P
PrintablesKilinar

Temperature towers for PLA and PETG. GCODE for ELEGOO Neptune 3 Pro included

Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro

Downloads
2,200
Likes
67
Rating
5
P
Printablesgiveen

Barad-dûr (Sauron's tower) dice tower

Set size to 465mm, cut into 3 pieces to fit on an Ender 3 and added connectors to make assembly easy. Set to 10% Gyroid infill on Pursa.

Downloads
2,179
Likes
462
Rating
4.82
P
PrintablesJ&S Design

Flower Butterfly

Butterfly with flower design Suitable as home decoration, wall art or coaster under your cup Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament 0,15 - 0,2 mm layer height…

Downloads
2,129
Likes
350
Rating
5
P
PrintablesMachspace

Tradescantia plant leaves and flowers bookmark

This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…

Downloads
2,070
Likes
454
Rating
4.86
P
PrintablesViermalbe

Gridfinity Modular Drawer Remix

A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…

Downloads
2,012
Likes
535
Rating
5
P
PrintablesCalebTimoteo

Heart Vase - Flower Vase (Decoration)

Any feedback would be greatly appreciated. Commercial Use 'til March Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)

Downloads
1,985
Likes
513
Rating
5
P
PrintablesMemo

IKEA ALEX Drawer Organizer

IKEA ALEX Drawer Organizer, fits just right. In order to fit perfect you need to follow the same layout. Print: 3x - (File 3x5AH) 1x - (File 5x9) 1x - (File 10x3FH) 2x - (File 4x6) 2x - (File 7.5x6)

Downloads
1,961
Likes
551
Rating
4.89
P
Printablesbkerler

Core One / Core One + / Core One L w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…

Downloads
1,953
Likes
222
Rating
4.92
P
PrintablesPrime Senator

Rain-Showerhead

This rain showerhead took several versions to "develop", but now I am showering sice 8 Months with it. The droplets produced by it are very nice and “soft”. You might need some O rings to make a good seal. If the thread does not fit,…

Downloads
1,942
Likes
302
Rating
5

Magic: The Gathering Counters / Chips UPDATED 5-3-2019 (Life, Mana, Abilities, Loyalty, Energy, Power, Toughness) MtG #MtGCounters

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are stackable counters…

Downloads
1,838
Likes
485
Rating
4.89
P
PrintablesMuddledRemarks

Super Stubby Nozzle for Milwaukee M18 Fuel Blower

Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…

Downloads
1,830
Likes
230
Rating
5
P
Printablesel_caspien

Wall art vase with flowers

Wall art vase with flowers

Downloads
1,810
Likes
657
Rating
4.67
P
PrintablesFredslund

PRUSA Sorting Tower MK1 - Vase Mode

Check the new version: https://www.prusaprinters.org/prints/82892-prusament-sorting-tower-mk3 The sorting tower is made for filament PM spools and Prusament Spools. The draws are made for spiral vase mode, in order to reduce used…

Downloads
1,778
Likes
1,297
Rating
4.79
P
PrintablesMarianne657

Abstract flower - XL texture roller

Imprints clay with a beautiful abstract flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm…

Downloads
1,761
Likes
392
Rating
5
P
PrintablesDaveDude

Balcony Strawberry Tower with IKEA Persillade Modular Hydroponic

Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…

Downloads
1,760
Likes
497
Rating
4.75
P
Printablesphrogpilot73

Ender 3 V2 Temp Tower PETG

Included is a ready-made gcode for Ender 3 V2 temp tower for PETG. E-Steps are set for my extruder, change line 21 in G-Code to your extruder's E-Steps. Comment out line 20 if you don't have BLTouch/CRTouch.

Downloads
1,728
Likes
64
Rating
5
P
Printablesprodigy8

Wall Art - Flower Rabbit Easter

Wall Art - Flower Rabbit Easter

Downloads
1,713
Likes
343
Rating
4.9
P
PrintablesBobMcGlobus

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

Downloads
1,699
Likes
329
Rating
4.33
P
Printablesbuchnema

Magnetic Weekly Pill Organizer with Sliding Drawers – Customizable Text, Modular Design

Because I couldn’t find a pill organizer with a clean and appealing design, I created this compact weekly pill organizer that allows you to easily pour out your medication. Each drawer snaps into place using integrated magnets , giving a…

Downloads
1,673
Likes
213
Rating
4.75
P
PrintablesYosuke

Short flat nozzle for Makita blower DUB185

A short flat nozzle for Makita 18V blower DUB185. I made this for drying car/motorcycle after washing, but someone may have another way of use. I made 2 versions that have different opening area (740 mm2, 538 mm2). I'm still testing which…

Downloads
1,671
Likes
201
Rating
4.86
P
PrintablesDanae

EARRING LOTUS FLOWER PENDANT

I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…

Downloads
1,604
Likes
354
Rating
4.67
P

Under-Desk Drawer – Multiple Sizes and Variants

🛠 Universal Add-On Drawer for Desks or Shelves – Multiple Variants Expand your storage space with style and practicality! This 3D-printable drawer is designed to mount under a desk or shelf, making it a perfect addition to offices,…

Downloads
1,594
Likes
634
Rating
5
P
Printables3DVJ Models

Hand Powered Helicopter/Propeller Toy

Simple yet fun toy to use outside! Be mindful when using indoors, your walls will thank you later. I created this model in aim to replicate ones seen at local events in my area. After researching more on these toys I found you generally…

Downloads
1,593
Likes
236
Rating
4.75
P
PrintablesExtrutim

Missle Power Switch Cover For Power Strip

A simple cover for multiple socket outlets with standard switches. You need 2 M3x8 screws and some double-sided tape to attach. If you like check out my other designs too! Note: Since the question came up recently, the license states that…

Downloads
1,569
Likes
680
Rating
4.98
P
Printablestoddanglin

MagicBand+ Charging Tower

Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…

Downloads
1,559
Likes
163
Rating
4.8
P
PrintablesKehet

Dice tower with self loading mechanism

UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…

Downloads
1,524
Likes
869
Rating
4.61
P
PrintablesSteve DeGroof

Parametric Spool Drawers

Update 2025-06-01 : Added STL files for a spool column to allow spool stacking. They're sized to allow for a wide variance in spool widths and hub diameters. I've got a bunch of filament spools sitting around, and wanted to turn them into…

Downloads
1,523
Likes
828
Rating
5
P
Printablesbkerler

MK4S w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…

Downloads
1,517
Likes
215
Rating
5
P
PrintablesHD_Creator

Nozzle for shower hose to clean the outlet (straight and bent)

These nozzles feature the usual ½ inch (ISO228) thread that fits on most shower hoses. They create a very pointed and strong water jet that lets you power-wash the outlet of your shower or bath tube. The credit for the idea to print this…

Downloads
1,496
Likes
268
Rating
4.95
P
PrintablesAndreas G

Collection of Flowerpots/Inner Plant Pots in various dimensions

Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…

Downloads
1,493
Likes
318
Rating
5
P
PrintablesDesmodromic

Kitchen Drawer Tray

A kitchen drawer tray that I designed to fit my “junk drawer” in my kitchen to help keep things organized. This fits in my particular drawer in a 2x2 arrangement (two side by side in back, with two more side by side in front) and I've…

Downloads
1,383
Likes
329
Rating
5
P
PrintablesAlvomane

Miele PowerDisk compatible lid | Miele PowerDisk kompatibler Deckel

Kudos to Robert Schiele for the brilliant idea to design a lid for the Miele PowerDisk ! My first PETG prints in 100 and 100.5% scaling were unfortunately not a success. They were too tight and did not fit. Update 04/23/23: Then I scaled…

Downloads
1,380
Likes
73
Rating
4.9
P
PrintablesReismann

Shelly Plus - Power Cord Housing

Within this box fits a Shelly Plus (1, 1PM, 2PM) and two WAGO 221 connection clamps for easy cable connection. Cables are secured by two printed cable clamps. I used threaded inserts from ruthex in size M3 for the screws. (For Shelly Plus…

Downloads
1,353
Likes
236
Rating
5

Penguin with Drawer Organizer

Original model was designed by chendragon2099. Body is prepared for MMU2S. Filament 1: Body; Prusament PLA Galaxy Black Filament 2: Face + Tail + Belly; Prusament PLA Vanilla White Filament 3: Beak ; Prusament PLA Lipstick Red The drawer…

Downloads
1,285
Likes
140
Rating
4.5
P
Printablesthe_21_HER0

Moosstab Mittelalter Turm / Moss pole middle age tower

ein Moosstab der wie ein Mittelalter Turm aussieht

Downloads
1,282
Likes
229
Rating
4.75