Search results: xn

Sort order

Counting matching models…

PXN V99/V10 (PRO/ULTRA) Steering Wheel Mod

Replaceable Steering Wheel Cover for PXN V99/V10 (PRO/ULTRA) To install, remove the hexagon head screws from the wheel and replace the faceplate. To assemble the handles, you will also need: 6x M3 x 20 mm screws (DIN 912) 6x M3 nuts

Downloads
790
Likes
31
Rating
5
P
PrintablesUrbanpirate

MIG 23 flight stick for PXN 2119 II hotas

This is based on the awesome MIG23MLD-Joystick-Gimbal by tiktrimo over on Github. Do check out the other cool things he's got going on here: https://github.com/tiktrimo https://imgur.com/user/tiktrimo The joystick is a replacement for the…

Downloads
390
Likes
56
Rating
0

PXN-A7 GearBox Handle

Replacement of the main gearbox handle for the PXN-A7. For installation, you will need a standard screw for fixing the main gearbox handle.

Downloads
340
Likes
29
Rating
5
P
PrintablesEduardo Gabriel

Load Cell Pedal MOD PXN PDHM

This is a mod for use with PXN PDHM, with this mod you can have a load cell in your brake pedal. It is totally plug and play, you don't need to change the original electronics. It uses a inexpensive 50kg load cell a HX711 and a arduino…

Downloads
331
Likes
29
Rating
5
P
PrintablesTyxio

wheel pxn v10 pro/ultra 325mm

wheel pxn v10 pro/ultra 325mm jeśli ktoś wykona będę wdzięczny za zdjęcie i komentarz

Downloads
272
Likes
19
Rating
0
P
PrintablesT0Bi

PXN CB1 Mount

This is a quick mount I made for the PXN CB1 button box. It fits the "side arm" of the Next Level Racing wheel stand 2. I printed this with 4 walls and 15% infill and it seems to hold up well.

Downloads
166
Likes
13
Rating
4.5
P
PrintablesM4nu3l

Picatinny Rail for SixNeedler

This Picatinny rail attachment allows you to add a flashlight or laserlight to the bottom of your SixNeedler.

Downloads
153
Likes
6
Rating
0
P
PrintablesRiceCakes

pxn v10 325mm wheel

Just print the parts, put pegs in one side of each piece, put the pieces together, then screw it on. I didn't use glue or anything and It's pretty sturdy. Need to print 6 pegs.

Downloads
153
Likes
8
Rating
0
P
PrintablesCheruTijntje

Large volume driptray for Krups Essenza Mini XN110x

The Krups Essenza Mini comes with two tiny driptrays. One is full after two cups of coffee, the other is always near empty. So I created a single compartment which does fit the original parts.

Downloads
142
Likes
12
Rating
5

PXN-CB1 button box adapter (RAM mount to VESA 100)

Introduction This is an adapter to mount the PXN-CB1 to a 8040 profile sim rig with a RAM mount. The linked RAM mount is made from black aluminium and fairly strong so the button box doesn’t shake while touching. The links below are…

Downloads
129
Likes
31
Rating
5
P
PrintablesSireInsectus

1xN Header Pins (1 to 8)

Item is for modeling only and is not intended for printing

Downloads
121
Likes
12
Rating
0
P
PrintablesWebbes

Krups XN250 Nespresso Drip Tray

I cannot use the original drip tray as it does not allow me to fit my favorite cup. I do tend to forget to put my cup in place at least once a week however, which then results in a big mess… sigh… For that sole reason i decided to print…

Downloads
120
Likes
5
Rating
0
P
Printablesnotlion

Begode EXN Fender

This fender is meant to be a drop-in replacement for the stock Begode EXN fender. It fits into the pockets and grooves in the rear of the case. This design prints without supports in about 5 hours on my Prusa MINI+ Details: Filament:…

Downloads
117
Likes
11
Rating
0
P
PrintablesAmbrosia

Upgraded stand for NESPRESSO by KRUPS Essenza Mini XN110840 Coffee Machine

I modelled the original stand and then increased the area on which a cup can be placed. The optional brim is an anti-slip feature that should be carefully superglued to the top of the new stand. Print this in a food-safe material or…

Downloads
113
Likes
14
Rating
5

BlackCrow RS19 - EXN Gotway Begode Stand

The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong PLA: Prusa Blend, CC3D…

Downloads
103
Likes
12
Rating
0
P
PrintablesFabio

GoPro Tripod Mount w/ 1/4" HexNut Pocket Hole + Insert Nut

Remix GoPro Tripod Mount with a pocket hole for a 1/4" Hex Nut + remix for Insert Nut

Downloads
98
Likes
5
Rating
0
P
PrintablesKelly W

PXN CB1 Button Box holder for 40mm aluminium profile

This is my version of the PXN button box holder for Next Level racing rigs. It can be mounted to left or right of the rig, and is angled slightly up and towards the driver. Pring with at least 3 walls and 15% infill on a 0.4mm nozzle for…

Downloads
95
Likes
10
Rating
5
P
PrintablesFEMAVA

Contador de Monedas ($5 mxn)

Solo imprimirlo y listo.

Downloads
93
Likes
5
Rating
0
P
PrintablesX-Slot

Support 4040 PXN CB1 Control Button Box

PXN CB1 Control Button Box mount for 4040 aluminum extrusion. Features an adjustable angle for improved ergonomics. Includes a center hole for M8 rig mounting. The design allows the CB1 to rotate: install the central screw first, then set…

Downloads
92
Likes
4
Rating
0
P
Printablessparkstack

PXN-CB1 button box mount

I have an RSeat P1 and while the tubular construction is rock solid, it does make mounting add-ons more difficult than a profile rig. So, like anyone would, i bolted a slab of oak to it. The oak shelf lets me use a trackpad, streamdeck,…

Downloads
90
Likes
12
Rating
0
P
PrintablesZSNO

HexNade - Grace Howard (Zenless Zone Zero)

All parts have a 0.2mm tolerance relief and should snap together, except for the top two pieces which need to be glued or fused.

Downloads
90
Likes
25
Rating
0
P
PrintablesKaPuLi

U-Clamp U-Schelle (FreeCAD) HexNut-Version - fully parametric

English: Open the model in FreeCAD. Adjust the dimensions using the “Spreadsheet” (see drawing for name assignment). Click on the model and export it as STL. Deutsch: Modell in FreeCAD öffnen mit dem “Spreadsheet” die Maße anpassen (Siehe…

Downloads
89
Likes
12
Rating
0
P
PrintablesPavel

Reflexní boky Radlice Tatra VT 8x8

Reflexní boky Radlice Tatra VT 8x8 Nalepte a přišroubujte ( Lesklá a hladká strana přijde z venčí )

Downloads
89
Likes
11
Rating
0
P
PrintablesFEMAVA

Contador de Monedas $1 mxn

Para cuando tengas que contar muchas monedas, se te facilite el trabajo.

Downloads
88
Likes
3
Rating
0
P
Printableskukident

Oscar Female w/ Lipstick (XNTM)

remixed statue of official oscar holding lipstick/ use for fun contests ;)

Downloads
88
Likes
5
Rating
0
P
PrintablesKoog

Knurled, 608, M8 Hexnut fidget spinner

Happy printing! Description : I made my version of the fidget spinner body to practice the knurled textures. press-fit and/or with some superglue will work. Model height: 7mm (same as 608 bearings) Hole tolerance: 0.2mm (e.g. 22.2mm for…

Downloads
87
Likes
10
Rating
4.67
P
PrintablesFEMAVA

Contador de Monedas ($2 mxn)

Solo imprimirlo y listo.

Downloads
85
Likes
3
Rating
0
P
PrintablesFEMAVA

Contador de Monedas ($10 mxn)

Solo imprimirlo y listo.

Downloads
84
Likes
5
Rating
0
P
PrintablesKaPuLi

Clamp Schelle (FreeCAD) HexNut-Version - fully parametric

English: Open the model in FreeCAD. Adjust the dimensions using the “Spreadsheet” (see drawing for name assignment). Click on the model and export it as STL. Deutsch: Modell in FreeCAD öffnen mit dem “Spreadsheet” die Maße anpassen (Siehe…

Downloads
80
Likes
12
Rating
0
P
PrintablesFlllN

Coin Holder Mexico Peso MXN

Coin Holder for Mexican Pesos Suitable for coins 1, 2, 5, 10 Monedero para Pesos Mexicanos Adecuado para monedas 1, 2

Downloads
78
Likes
8
Rating
0
P
PrintablesDennis Nilsson
Downloads
68
Likes
5
Rating
0
P
PrintablesPeppuzzo

Nespresso Inissia XN1005 liquid recovery tray

I designed this model as a spare, since I broke the original. print in petg for food use, if possible coat it with resin

Downloads
64
Likes
5
Rating
0
P
PrintablesCanela Canela

PXNDX keychain

You can print this as big or small as you want. Do not need supports. I did not design the logo, just adapted it into a keychain.

Downloads
63
Likes
2
Rating
5
P
PrintablesMatthew LaBerge

iFauxn 4 Cash/Gift Card Trap

My family has a tradition of making people work for cash or gift cards if they do not give a suitable suggestion for their birthday. So this year I decided to take advantage of my 3D printer to fully encapsulate some cash for one of my…

Downloads
60
Likes
7
Rating
0
P
Printablesaaronp18

Nespresso Vertuo Plus Replacement Capsule Container Krups XN900 MS-624276

I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…

Downloads
60
Likes
5
Rating
0
P

IKEA VOXNAN soap dispenser caddy

Designed to fit a Scotch-Brite non-scratch scrub sponge and the IKEA VOXNAN soap dispenser with a roughly 75mm (3 in) diameter. https://www.ikea.com/us/en/p/voxnan-soap-dispenser-chrome-effect-20328978/ The IKEA VOXNAN soap dispenser…

Downloads
59
Likes
14
Rating
5
P
Printablescereyanli

IKEA LILLNAGGEN Hanger for IKEA VOXNAN

Don't you want hang your IKEA LILLNAGGEN while you are showering ?

Downloads
58
Likes
18
Rating
0
P
PrintablesJanko Kolanko

A shorter stand for the PXN V9 GEN 2 whee

This is a shorter stand for keeping the PXN V9 GEN 2 wheel. My table was too small, and my knees kept on hitting the screws, so I designed a new stand that solves this specific problem. I want to maybe help others with that same issue.…

Downloads
54
Likes
3
Rating
0
P
Printablesneoteric

My Customized hinged box 1xN V2

Customized version of http://www.thingiverse.com/thing:2125460 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=2125460 Instructions Using the following options: _text12 = _text11 = _text10 = separatorsLid…

Downloads
53
Likes
5
Rating
5
P
PrintablesK Anator

PXN V99 Steering Wheel Mod - Split

I might have to revisit this, if not here's the file to print the faceplate on a smaller printer like the Ender 3. You'll have to split to objects and resemble the little nubs with this version because I neglected to separate them in to…

Downloads
49
Likes
4
Rating
0
P
Printablesshaunhey

PXN V900 Gen2 Low Profile Bracket

This is a very low profile non-adjustable bracket for the PXN V900 Gen 2 steering wheel. I printed this in PLA on an Ender 3 at max speed, sliced using Cura, 10% gyroid infill, 4 walls, 0.28mm layer height, minimal supports just for the…

Downloads
47
Likes
0
Rating
0
P
PrintablesRaptorSLegacY

MINI-x-end with hexnuts

I wanted to put hexnuts right near were the screws touches the bars, because after a while the screw will tear into the plastic and then it will no longer tighten, i had 2-3 fails with the stock prusa part this bugged the hell out of me…

Downloads
47
Likes
9
Rating
0
P
PrintablesMarcus Svensson

Gridfinity | Bin | Box | Assortment | 1 x N x 4 | WXN

Gridfinity assortment box / bin Generated box with dividers in different sizes. Width = 3 Length = 5 Height = 4 Walls X oriented < 9 Make your own custom designs for free with the super simple https://gridfinitygenerator.com where this…

Downloads
47
Likes
8
Rating
0
P
PrintablesTeppetuary

Gridfinity 3x4x6 2xNeedle Nose Pliers Bin

A 3x4x6 gridfinity bin sized to fit two pairs of needle nose pliers. One is an engineer long nose PS-03. The other is a Tekton Mini Needle Nose Pliers PMN01001. Remixed from a model by @ netpaq .

Downloads
44
Likes
6
Rating
0
P
Printablescereyanli

Multipurpose Hook For IKEA VOXNAN Shower Basket

IKEA VOXNAN Basket is a nice easy to install but missing hooks to hang stuff on it such razor blade or bath sponge

Downloads
43
Likes
9
Rating
0

BXN 3D Perf - CR10S PRO - V6 Direct-Drive

Bonjour, Voici ma tête d'impression direct-drive pour CR10S PRO V2. Montage hotend type V6 full métal en cuivre ! La description complète et les instructions d'achat hardware et de montage sont dans le PDF téléchargeable (instructions in…

Downloads
41
Likes
6
Rating
0
P
Printablesneoteric

My Customized hinged box 1xN V2

Customized version of http://www.thingiverse.com/thing:2125460 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=2125460 Instructions Using the following options: wallThickness = 1.4 boxDepth = 60 textBase…

Downloads
41
Likes
1
Rating
0

BXN 3D Perf - CR10S PRO - Quiet Pack BMG

=>MERCI DE BIEN LIRE LES MISES A JOUR SVP<= Bonjour, Je vous propose ici mon pack silence pour CR10S PRO V2 (n'ayant pas testé le montage sur la V1 je ne garantis pas la compatibilité au niveau du capteur de plateau). Toutes les…

Downloads
40
Likes
4
Rating
5
P
PrintablesKaPuLi

U-Clamp U-Schelle (FreeCAD) HexNut-Version - fully parametric

English: Open the model in FreeCAD. Adjust the dimensions using the “Spreadsheet” (see drawing for name assignment). Click on the model and export it as STL. Deutsch: Modell in FreeCAD öffnen mit dem “Spreadsheet” die Maße anpassen (Siehe…

Downloads
39
Likes
9
Rating
0
P
PrintablesKeepy

TP-LINK XN020-GV3 Fiber Router stand

Stand for TP-LINK XN020-GV3 Fiber Router.

Downloads
39
Likes
2
Rating
0
P
PrintablesBearded_n0va

PXN VD Load cell

2nd Gen pedals do not have a hole to bolt through to support the original, this allows owners to use the base design without needing to drill through their pedals. Also added an option to use the stock 50mm spring that comes with the…

Downloads
38
Likes
5
Rating
0
P
PrintablesTimotej Mierva

3axis joystick 3DOF joystick (OMTER TYXN)

An accurate model of cheap hobby 3D joystick. For mounting use 3mm thick board with 40mm hole in it. (that video is not

Downloads
36
Likes
2
Rating
0
P
PrintablesGigaloader

Wuxn WXR Fan Shroud for improved cooling.

Improved cooling fan shroud for the Wuxn WXR printer for fast printing. It requires a silicon boot when fan is set to 100% - to protect the hotend from over-cooling. https://www.sliceengineering.com/products/copperhead-silicone-boot Fan…

Downloads
36
Likes
8
Rating
5
P
Printablesbrd130

Ikea Voxnan adapter

The original adapter didn't work well when the shower pipe was very close to the wall (3cm), so I developed this one, which works much better. The first version was printed with PLA and lasted for almost two years. This improved version…

Downloads
35
Likes
5
Rating
5
P
PrintablesKaPuLi

Schelle Clamp (freeCAD) HexNut-Version - fully parametric

English: Open the model in FreeCAD. Adjust the dimensions using the “Spreadsheet” (see drawing for name assignment). Click on the model and export it as STL. Deutsch: Modell in FreeCAD öffnen mit dem “Spreadsheet” die Maße anpassen (Siehe…

Downloads
35
Likes
11
Rating
0
P
PrintablesAuer Kriaztian

PXN V9 wheel adapter

for universal use i didnt made holes for the screws so its needs a bit drilling and threaded insert for plastics or you can cut threads in the plastic if you need some modification just ask and i will try it to make it

Downloads
33
Likes
1
Rating
0

Ferrari 296 gt3 steering wheel for PXN v10

So, I bought my first sim-racing steering wheel—the PXN V10 Ultra. I decided right away that I wanted a wheel modeled after my favorite car, the Ferrari 296. I figured 3D printing one would be much easier than buying one from a store for…

Downloads
30
Likes
2
Rating
0
P
PrintablesParallax GT

PXN GT One to Fanatec QR Lite, QR1 & QR2 Adapter - 50.8mm & 70mm Patterns. (2 Models Solid & Lite)

PXN GT One to Fanatec QR1 / QR1 Lite / QR2 Adapter (60mm Extension) This adapter connects a PXN GT One Steering Wheel (50.8 mm pattern) to Fanatec QR1, QR1 Lite, and QR2 systems. It provides a 60mm extension for better clearance and…

Downloads
29
Likes
6
Rating
0
P

IKEA VOXNAN toilet roll holder wall mounting plate

This is a backplate for the IKEA VOXNAN toiltet rol holder. Instead of drilling a holes, you can use dubbelsided tape. I used Tesa indoor tape. Be sure to degrease the surface first.

Downloads
29
Likes
2
Rating
0
P
PrintablesSSX556

Playseat Challenge X PXN SF U Shifter Mount + STEP Files

There was no mount for a PXN SF U Shifter to a Logitech Challenge X and the existing one for the Moza shifter has been done in crappy STL format which is totally against the community-centered 3D-printing idea, so I remade everything from…

Downloads
28
Likes
2
Rating
0
P
PrintablesJochen

Parameterized HexNut Knob

A simple knob to add to an hex nut or to an screw with a hex head. The width and the hight of the knob and also of the hex nut can be adjusted via Fusion360 parameters. The stl works for me for an M6 with a tight fit. Maybe you have to…

Downloads
27
Likes
2
Rating
0
P
PrintablesGigaloader

Wuxn WXR Linear Rail Z-Upgrade

I designed an upgrade for WXR Z-axis to Linear Rails. Print in PETG with 30% cubic infill and 3 vertical shells. Minimum Part List: 2 x MGN12H Linear Rails 300mm 14 x M3*12 Screws (8 for the coaster the rest for the rail mount) 6 x M3…

Downloads
27
Likes
7
Rating
5
P
PrintablesReboot

Silly Scope Brackets - M3 Hexnuts

Added inserts for M3 hexnuts on the brackets. I'm always a dingus putting things together and I strip the plastic, and I do not trust myself with the threaded heat inserts.

Downloads
27
Likes
3
Rating
0
P
PrintablesW

Simple Hexnut

A simple hexnut. Dimensions may not be correct! Not tested nor printed myself!

Downloads
26
Likes
1
Rating
0
P
PrintablesMarvil

Gridfinity USD / MXN Coin Holder

As I live in Mexico, I remixed this gridfinity coin holder to hold 25¢, 10¢, 5¢, and 1¢ USD, as well as $10, $5, $2, and $1 MXN.

Downloads
25
Likes
5
Rating
0
P
PrintablesInfestus

GoPro backpack mount (tilted, hexnut socket added)

When using the normal GoPro mount your video will be offcenter because or your Backpack straps beeing not straight. You can adjust this with these mounts. I would recommend the 10° Version.

Downloads
25
Likes
3
Rating
0
P
PrintablesEdward15

CWWK X86-P5 NAS board case - 4xNVME + 2xSSD

The fan is a regular 120mm PC fan. The shield is for the board with red USB ports and FPC cable (rev 1.1). I might upload the shield for the board with blue ports as well. No promises. The shield is separate from the main body. It can be…

Downloads
25
Likes
1
Rating
0
P
PrintablesUrbanpirate

PXN 2119II flight stick core

Hey there lads and ladies, bought one of those cheap Chinese hotas sets ages ago. Unfortunately the grip was a little too small for my hands. Long story short, I recreated the joystick inner column so I can 3D print any grip I desire and…

Downloads
25
Likes
1
Rating
0
P
Printablesbomtarnes

SixNixCase

This is a case I designed for the GRA & AFCH 6 digit IN12 Nixie clock ( https://gra-afch.com/catalog/diy-kit-for-nixie-tubes-clocks/diy-kit-for-nixie-tubes-clocks-in-12/ ). Requires a handful of extra PCB standoffs and screws to secure.…

Downloads
25
Likes
0
Rating
0
P
PrintablesSANAIR

Handle HEXNUT M24 (or other)

Handle for M24-HEXNUT with 3-fold and 6-fold option. Parametric Fusion360-files attached for other sizes. Prints well in the stronger the better ;)

Downloads
24
Likes
4
Rating
0
P
PrintablesYourBuddyDinec

Wuxn3D WRX - Subaru Impreza WXR STi Mashup Model - No support needed

Made this as a joke because I couldn't get the idea out of my head. Sorry it took to long to make manifold. Its a mashup of the printer name the WXR and the car name the WRX. Hope you all enjoy!

Downloads
24
Likes
9
Rating
0
P
PrintablesMetatron

Krups Nespresso Pixie Clips XN3020 Wasserfüller

Wenn eine Krups Nespresso Pixie Clips XN3020 zu lange nicht benutzt wird, trocknet der Boilder und die Pumpe innen komplett aus. Bei Wiederinbetriebnahme schafft die trockene Pumpe es dann nicht, dass Wasser aus dem Wassertank anzusaugen.…

Downloads
24
Likes
2
Rating
0

CF-Tube insert for M5 Hexnuts

Printed with ABS+, but PLA should also do it. Standard print settings - no special troops needed. One side slightly rounded for better insertion.…

Downloads
23
Likes
2
Rating
0
P
PrintablesJoe

Freezer side baskets for a Whirlpool side-by-side refridgerator model GS2SHKXNQ00

Freezer side baskets for a Whirlpool side-by-side refridgerator model GS2SHKXNQ00 Helps keep some of the smaller stuff from overflowing the small freezer shelves.

Downloads
23
Likes
6
Rating
0
P
PrintablesAdam Prchlík

Hexnut Cover

Simple M8 hexnut cover - friction fitted usualy works nice Any matterial + printable without supports size could be adjusted to fit also other M hexnuts sizes

Downloads
22
Likes
2
Rating
0
P
PrintablesJangy

AXN Floater Jet motor mount

AXN Floater Jet motor mount Uses the 16 x 19 mm motor mount to make changing the motor easier. increases the motor height for larger propellers. Print Settings Printer: Tronxy D01 Rafts: No Supports: No Resolution: 150 Infill: 30…

Downloads
21
Likes
3
Rating
0
P
PrintablesBenjamin Cid

Playseat lock for PXN A9

lock for 26mm diameter tubes

Downloads
21
Likes
4
Rating
5
P
PrintablesDIAMXND

DIAMXND Custom Knife

You can use the bigger hole for spinning.

Downloads
21
Likes
4
Rating
0
P
PrintablesMetz

PXN V99 bracket for pedals

necessary: pedals for pxn v99 bolts m6x12 count - 4 bracket for pedals - 4 material for printing - PETg 0.2

Downloads
20
Likes
2
Rating
0
P
PrintablesJoe

Container for a Whirlpool side-by-side refridgerator model GS2SHKXNQ00

This container is designed to fit beside the egg holder on a Whirlpool side-by-side refridgerator model GS2SHKXNQ00

Downloads
20
Likes
3
Rating
0
P
Printablesnihirash

Shama's ZXNet512(Spectranet clone) case

Case for ethernet controller(compatible with Spectranet) for ZX Spectrum(produced by Shama). It's looking good even with 0.3 Draft PETG preset. I'd prefer use petg for this print cause it works better with self-tapping screw. 100% infill…

Downloads
20
Likes
0
Rating
0
P
Printablesvsky279

Transport box for LXNAV Nano4 Flight Recorder

To complete the hinge you need a piano wire. It is used also to strengthen the clips. Place a pause at the uppest layer of the hole. Place the wire and let it cover with new layers. The logo is printed with black color in the first layer.…

Downloads
18
Likes
1
Rating
0
P
Printablesdanielkrah

Hexnut holder for MK52 heated bed frame.

It can be glued with super glue on the carriage. Should be printed at least with PETG better in ABS

Downloads
18
Likes
5
Rating
0
P
Printablesz062007vette

IKEA VOXNAN soap dispenser catch

Since the soap will leak out and drip on to the vanity, it has stated to take away the finish. So I made this to work with the IKEA VOXNAN soap dispenser. It was designed in TinkerCAD. Print Settings Printer Brand: Bambulabs Printer:…

Downloads
18
Likes
1
Rating
0
P
PrintablesJah

Boxnaught (V3)

There will be a second face option soon.

Downloads
18
Likes
2
Rating
0
P
PrintablesGigaloader

Wuxn WXR Screen Faceplate (for octoprint setup)

Wuxn WXR screen faceplate, fits 5inch touch screen with raspberry pi. Best printed in PETG. Parts needed: Raspberry pi 4B Freenove 5inch touch display USB cable (A to B) (Fix the screen in place with a little hot glue in the corners from…

Downloads
18
Likes
5
Rating
5
P
PrintablesThiago Campos

The Triplex - Fidget Spinner M10 Hexnut

Adapted from The Triplex Fidget Spinner, by hodginsa ( https://www.thingiverse.com/thing:1871940 ), to use a M10 hexnut. Update 2017/07/10: fixed the issue of this model with Slic3r. Category: Toys & Games

Downloads
18
Likes
1
Rating
0
P
PrintablesDrewDeeDoo
Downloads
16
Likes
1
Rating
0
P
PrintablesJose Alonso R

Coin Organizer / Organizador de Monedas (MXN)

A vertical coin organizer and dispenser tailored for Mexican currency. It features engraved labels at the base for clear identification. Ideal for keeping loose change tidy.

Downloads
16
Likes
8
Rating
0
P
PrintablesAntToeKneeOh

XNaut 2D Art

2D Art of the XNauts from Paper Mario Thousand Year Door. There is a Scientist version and a regular version. You can change the color an make an Elite XNaut

Downloads
16
Likes
1
Rating
0
P
PrintablesIncogMaker

PylexNodes Statue

Made as a gift for my friend who happens to own a server hosting company called PylexNodes. If the logo does not fit with the base, I suggest playing with horizontal expansion (preferably base stand) or download the other stl logo file…

Downloads
15
Likes
5
Rating
0
P
PrintablesDeatsch

Base for IKEA VOXNAN soap dispenser caddy

A Base for the IKEA VOXNAN soap dispenser caddy so the water and soap is collected. Printed with xpetg blue from extrudr Nozzle Heat: 220 Bed Temp.: 90

Downloads
14
Likes
1
Rating
0
P
PrintablesJah

Boxnaught (V1) OUTDATED

Two versions of the body allow for the Classic Boxnaught or print the plain body version and give him whatever face you want. Print at 200% scale for as close to the real thing as possible… for now. Again very fragile so I suggest a…

Downloads
14
Likes
0
Rating
0
P
PrintablesGigaloader

Wuxn WXR 3D Printer Camera Mount

Wuxn WXR Camera Mount (Pi Camera

Downloads
14
Likes
3
Rating
0
P
PrintablesSk8dada

PXN CB1 back mount with 1/4 insert

This model is used to replace the clamp given with the CB1 Button Box with a mount with a 1/4 insert. I used ruthex 1/4" insert and it works like a charm. You can used provided screws to mount the 3d printed part to the button box. I…

Downloads
13
Likes
0
Rating
0
P
PrintablesLukas P.

PXN CB1 Button Box Halterung

Mit dieser Halterung kann die Button Box im 60 Grad Winkel an die Tischklemme monitert werden. Schreibtischmontage ist nun im perfekten und bequemen Winkel möglich. Was wird noch benötigt: Schrauben - 4 x M4x16 oder M4x20 - 2 x M5x8 Meine…

Downloads
13
Likes
1
Rating
0
P
Printablesmbadin

PA-GLAXNKKT-AL led profile/plug/dimmer

PA-GLAXNKKT-AL led profile/plug/dimmer

Downloads
13
Likes
2
Rating
0
P
PrintablesSoggySheepdog

Begode EXN Panel TPU Grommet

It squeezes down and holds the panel if you break the plastic.

Downloads
13
Likes
1
Rating
0
P
PrintablesSteve Miles

Qidi X-Smart 3 - Mount for the Mellow Fly SHT36v3 with Eddy. Also includes 3xNeopixel mount.

Created to mount the Mellow Fly SHT36v3 to the Qidi X-Smart 3. Includes. 1. Backplate. Fits to exiting tool board mounts 2. Eddy Mount (Adjustable. Aim for 5-6mm from nozzle height) Needs M3 heat inserts and M3x8/10 bolt 3. Cover. Space…

Downloads
12
Likes
1
Rating
0
P
PrintablesPiotrRago

Simple HexNut Cover for Tedi Led

Simple HexNut Cover for Tedi Led made with basic shapes in peusaprinter. Lovers chanver 71 mm Upper chamber 50.4 mm Oryginaly made for mnovitski https://www.thingiverse.com/thing:3964578 and TEDI led lamp like on the picture.

Downloads
12
Likes
4
Rating
0