Search results: xshot

Sort order

219 models

P
PrintablesRedCowl

Xshot Longshot Barrel Collet V2

V2, and a much needed upgrade of the original barrel collet system I made for the Xshot Longshot, using the same internal barrel collet as the Unicorn Wings Kit that can be found here: LINK . This still has the version of the collet that…

Downloads
1,219
Likes
117
Rating
4.88
P
PrintablesLeedle Dynamics

Xshot Ragefire Ammo Box

Attaches onto the side rails of the ragefire, holds the original belt or various delinking belts available on the internet, attaches without hardware

Downloads
1,079
Likes
143
Rating
4.75
P
PrintablesAKO Division

Pick-Rocket 2_ Xshot Micro Reshell // Nerf Attachment

Hey hey fellow Nerfers! I present to you the Pick-Rocket 2 (or the “Tactical Brick”, as I like to call it). This is a reshell of the Xshot Micro 1.0 (the previous version). You can use it as its own blaster or as attachment for your Nerfs…

Downloads
847
Likes
594
Rating
4.78
P
PrintablesRedCowl

Xshot Longshot Half Dart Magwells

To use, print both the left and right halves of either the “Low Profile” or the “Flared" versions. Both of these use the internals from the included X-Shot half length adapter, and both will require some cutting of the adapters…

Downloads
843
Likes
137
Rating
4.91
P
PrintablesManta Design

Xshot MPP Motorized Piston Pump AEB Flaired Magwell REMIX

Update 9/7/25: Added a V2 version with improved grip pattern and tweaked greebling for multi-color printing. This remix has the same install instructions as the original model. Just unscrew the bottom two screws of the magwell, slightly…

Downloads
798
Likes
141
Rating
4.9

XShot MPP AEB handguard/barrel shroud

Handguard/barrel shroud for the Xshot Motorized Piston Pump. Available in Keymod or MLOK. Also has an integrated QD sling mount. Friction fit- no hardware required.

Downloads
791
Likes
113
Rating
5
P
PrintablesJane Doe
18+

The source marked this model as adult content.

Downloads
719
Likes
486
Rating
4.96
P
PrintablesRedCowl

Xshot Longshot (XLS) Shotgrip Pump Grip

Both parts are designed to be printed with no supports, Use a 4-40 x 3/8in screw in the front if the picc lock isn't staying in place. You will need to prime the blaster before installing. Don't have a printer? Order from OOD! Affiliate…

Downloads
719
Likes
58
Rating
4.67
P
PrintablesRedCowl

Xshot Fury X Collet Frontend

Print with no supports, pull out the stock barrel and throw this one in. Don't have a printer? Order from OOD! Affiliate link !

Downloads
656
Likes
93
Rating
5
P
Printablesmr3yna

Xshot Longshot SCAR

This is a scar for the Xshot Longshot blaster. The stock scar was non functional. 6/20/23 Working on updated version ** added new V2 improved rifling and less FPS drop ** 6/27/23 Adding Version for 16mm replacement barrels *** added V3…

Downloads
607
Likes
53
Rating
5
P
PrintablesKyle Bernard

LongXshot (X-Shot Longshot Pro) Stock Lock & Cheek Rest (LEFTY & Righty)

I created this since there were not a lot, if any, cheek rests for LEFTYs... so i made my own!! My Stock Lock & Cheek Rest is a 2-Piece design. This allows for two things, (i) you can just use the Stock Lock by itself if you don't need…

Downloads
560
Likes
72
Rating
4.88
P
PrintablesManta Design

Xshot AEB Motorized Piston Pump BCAR Shroud

Update 8/4/25: Added a couple more versions with slightly adjusted openings if the original is too tight or loose for you. Alter the scale in your slicer if you need further adjustment. Easy to print shroud that friction fits over the…

Downloads
549
Likes
106
Rating
4.75
P
PrintablesRedCowl

Xshot Longshot Side Picatinny Rails

This design is meant to be a press fit into the trapezoidal cutouts in the rails of the Xshot Longshot. This uses 2x toy screws (the normal screws that Nerf, Dartzone, and Xshot use to keep their blasters together). There are a ton of…

Downloads
502
Likes
74
Rating
4.83
P
PrintablesCorvus

Xshot BCAR Shroud + Barrel Color Sleeve _ MPP _ X-Shot Motorized Piston Pump _ (or LONGSHOT 2.0)

Update --------- BCAR Shroud 1.1 ------> X-Shot MPP (or LONGSHOT 2.0 with EXTENDED custom barrels) + optional Barrel Color Sleeve for the MPP Wrap two to three layers of e-tape around the narrower rear section of the BCAR and insert it…

Downloads
430
Likes
104
Rating
5
P
PrintablesFIB

Short Battery Stock for the Xshot Piston Pump

Short battery stock for the Piston Pump combining the short simple design by ZafC with the utilisation of the original battery door by N8thin. Although this is a remix the battery stock was completely rebuilt from scratch using the two…

Downloads
424
Likes
68
Rating
5
P
Printablesdonutcat

Xshot MPP - Spring Spacers

Spring spacers for your MPP. Available in 2.5mm-10mm sizes, can technically stack them but I don't recommend it. Start small and go from there, I don't know what the max safe precompression on the stock spring is. Print something like…

Downloads
418
Likes
59
Rating
5
P
PrintableswindX

Xshot Longshot Spring Spacer

Spring spacer for the XLS. Adds ~10mm of precompression 7.5mm, 12.5mm and 15mm sizes also available. Slight edge on the outer end to help the spring stay aligned. Highly recommend you print this in 100% infill for durability reasons. Not…

Downloads
409
Likes
48
Rating
5
P
PrintablesChance

Boom Grip - X-Shot Longshot (Lonxshot / XSL)

My Boom grip, now remixed for the X-Shot Longshot. New this iteration: knurling. Neat. Uses one M5 bolt (either 30 or 35mm I think) and one M5 nut. Designed to be printed with the front end up - it'll bridge over the picatinny's end, no…

Downloads
381
Likes
46
Rating
5
P
PrintablesChris Strong

XShot Pro Motorized Piston Pump Barrel Shroud

If you are like me and absolutely despise the exposed barrel on the end of the new XShot AEB, then this model is for you! I designed this barrel shroud to match the general aesthetic of the blaster, as well as add some extra rail space on…

Downloads
380
Likes
81
Rating
5
P
PrintablesManta Design

Xshot AEB MPP Motorized Piston Pump Jam Door

Update 7/31/25: Added a closed version. I like to see the inner workings of a blaster so I designed this open jam door. No need to disassemble the blaster. Simply snap in place and secure with the original screw. Models are print oriented…

Downloads
367
Likes
84
Rating
4.8
P
PrintablesEvan

XShot Ragefire 120 round extended ammo box, Bruce Leedle Remix

Print facing up, 3 walls, 15% gyroid, supports ideal but not needed. The L and XL need to be printed vertically to fit on the build plate to fit. I'm currently working on the Giga Box which has a goal of 200 rounds with cardboard walls…

Downloads
364
Likes
47
Rating
5
P
PrintablesTrailblazer

XShot MPP Barrel Shroud (No Logo + Gapless)

This is the barrel shroud by High Country Blasters, now logoless and with added tabs for a cleaner appearance. I printed mine with 4 walls and 15% gyroid infill. Printed at a 45° angle with the blaster-interfacing end in the air. Use…

Downloads
344
Likes
54
Rating
5
P
PrintablesChance

Chance's XShot MPP Shroud

Introduction A replacement frontend for the XShot Motorized Piston Pump blaster. This shroud replaces the stock front orange piece (and its collet). It uses the tension-band barrel retention system I've been using on some of my personal…

Downloads
287
Likes
68
Rating
5
P
PrintablesRedCowl

Xshot Longshot Shorty PCAR

Press fit PCAR for Xshot Longshot, using Thanhtacles 's trivicus 1.0. It fits the lines of the blaster well.

Downloads
281
Likes
44
Rating
5

Picatinny stock for xshot fury x

I couldn't find a really good stock to use with the excellent mounting point created by @LikeThePlatypus , eventually I stumbled on ReptilianSnail's stock for the parallax, which had the exact style I was looking for, but needed a bit of…

Downloads
279
Likes
41
Rating
5
P
PrintablesCenturyMan79

Zuru XShot Pro Fury-X Barrel Collet

These files are not to be sold without my permission. I designed a barrel collet compatible with the Zuru XShot Pro Fury-X, allowing you to use custom barrels with a 16mm outer diameter that are longer than the original stock barrel. To…

Downloads
270
Likes
44
Rating
4
P
PrintablesPrintablJyngX

Xshot to Nerf rail converter

A rail converter for x shot blasters to attach a nerf scope

Downloads
252
Likes
33
Rating
5
P
PrintablesManta Design

Xshot Motorized Piston Pump MPP Charging Handle Extension

Simple print that uses less than 10g of filament. Adds width and grip to the existing charging handle. Making it easier to grab from either side speeding up your reload time. No need to modify or disassemble the blaster. Friction fit into…

Downloads
248
Likes
48
Rating
5
P
PrintablesManta Design

Xshot AEB Motorized Piston Pump MPP Mag Release

Update 9/6/25: Added V2 versions of both styles with improved grip pattern. 2 styles available. Friction fit (FF) and Hardware (HW). No support needed and models are print oriented. I recommend a .4mm nozzle or smaller due to the fine…

Downloads
245
Likes
44
Rating
5
P
PrintablesJaylan5

XShot Piston Pump AEB Spring Cap Removal Tool

A simple and easy-to-print tool that allows you to effortlessly remove or re-insert the spring cap of the XShot Piston Pump AEB in seconds! The two examples seen in the photos are printed in PETG (dark green) and PLA (brown), PLA and…

Downloads
241
Likes
46
Rating
5
P
PrintablesManta Design

Thumb Rest Jam Door Xshot Motorized Piston Pump MPP

Update 11/13/25: Added scale adjusted files. These are slightly larger if you are unhappy with the original designs fitment. Includes three different versions ranging from sealed to protect your blaster from the elements to open for easy…

Downloads
239
Likes
42
Rating
4.33
P
Printablesdonutcat

Xshot MPP - Buffertube Castle Nut

Replacement castle nuts for the buffertube stock on the Xshot Motorize Piston Pump blaster. I recommend trying the 04_clearance files first and then going down to 03 if too loose, 05 if too snug. On mine the first .5cm of threading was…

Downloads
210
Likes
56
Rating
5
P
PrintablesDarkstar77

XShot Fury X Fore Grip

It's a fore grip for the XShot Fury X. I have big hands, and other options either didn't work for me, or were too small, or blocked the safety. This one is longer, and sticks out a little from the front of the blaster. This would pair…

Downloads
204
Likes
30
Rating
5
P
PrintablesKptnAutismus

Xshot Pro Motorized Piston Pump replacement barrel collet nut

UPDATE 04.08.25: added thicker version that is closer to the original for handguard addons that clamp to the collet nut, like the terrier handguard by LoneWolf052 replaces the easily cracking barrel collet nut of the PP. i recommend…

Downloads
197
Likes
44
Rating
0
P
Printablesdonutcat

Xshot Longshot Barrel Collet V2 - Fixed Chamfer

Added a chamfer that was missing because it bothered me, that's it

Downloads
187
Likes
17
Rating
5
P
PrintablesRedCowl

Xshot Longshot Barrel Swap Collet (V1, OBS)

PLEASE USE THE V2 - IT IS SO MUCH BETTER: Can be found here: LINK This is a drop in replacement for the front end of the X-Shot Longshot's front end. There are many parts included, as there are many ways to use this mod. First, you will…

Downloads
180
Likes
27
Rating
0
P
PrintablesJovial Jaguar

Zuru Xshot Insanity Rail Clip and Ammo Can

I've created two separate models that - put together - will allow you to mount an ammo 'can' to the rails of your Zuru Xshot Insanity Minigun. For both parts, I used 10% infill and an adaptive cubic pattern. I also only used 2 wall loops,…

Downloads
176
Likes
27
Rating
0
P
Printablesidosu

XShot Motorized Piston Pump id Roller SCAR Cover

This is a cover for the original roller SCAR that comes with the MPP. It just friction fits onto the SCAR with ~0.1mm of tolerance, so it should be fine for any BL or similar printers with nice tolerances. I printed this on a Sovol SV08…

Downloads
169
Likes
46
Rating
5
P
PrintablesZafC

Compact Battery Stock for the Xshot Motorized Piston Pump

The mpp is pretty long (about the same as a stock harrier or swift). Can't do much about the core or barrel so here's an ultra compact stock that can fit a battery as wide/thick as the stock one or one as long as what the BK1S uses. Print…

Downloads
168
Likes
34
Rating
5
P
PrintablesManta Design

Xshot Motorized Piston Pump MPP LVOA Handguard(Multiple Sizes)

Update 8/15/25: Four new shorter sizes have been added (XS, S, M, L) making for a total of 5 sizes. The full size hanguard works best with the original barrel length. Update 8/14/25: A wrap around grip has been added to the files. Print…

Downloads
168
Likes
54
Rating
4.5
P
PrintablesManta Design

Xshot AEB MPP Motorized Piston Pump Handguard (Multiple Sizes)

Update 8/6/25: Fantasy themed add-ons (last photo) can be found in the remixes. Update 8/3/25: Added a small Mlok picatinny rail that can be installed in any of the mlok slots. Update 8/1/25: New Small and XS handguards available for…

Downloads
167
Likes
39
Rating
5
P
PrintablesManta Design

Xshot AEB Motorized Piston Pump MPP Magwell Plates

Update 9/5/25: Added Smiley and Stern emoji plates. Easy to print plates that friction fit into place. Blank set included so you can add your own logo or design. MPP Improved sights:…

Downloads
162
Likes
46
Rating
5
P
Printablesidosu

XShot Motorized Piston Pump id Barrel Shroud

This is a barrel shroud for the XShot Pro Motorized Piston Pump. It adds a top Picatinny rail, M-LOK slots on the sides and bottom, and points for a ball detent sling point (untested). For a 0.4mm nozzle w/ 0.2mm layer height: - 5 walls,…

Downloads
157
Likes
51
Rating
5
P
PrintablesAjsjsj

Nerf Xshot Holographic Sight

This is a Sight or scope that will fit on most nerf rails (not compatible with 20mm rails or real gun rails)

Downloads
156
Likes
20
Rating
0
P
PrintablesTrailblazer

XShot MPP Wide Charging Handle (Thicker Shell)

This model is a remix of the charging handle by N8than (loose tolerance version; which is still nice and snug, as the original was incredibly tight). The only change here is a thicker top shell for added rigidity, since the original was…

Downloads
151
Likes
30
Rating
5

ZURU xshot longshot replacement pins

Improved model, for easier printability, supports are recommended. The short one is the top pin and the long one is the bottom one.

Downloads
149
Likes
25
Rating
0
P
PrintablesVictor Shui

Silly shell adapter for Xshot longshot Barrel Collet

This allows you to shoot silly shells using your longshot. MAKE SURE YOUR LONGSHOT HAS A STRONG SPRING. The stock spring will work, but not very good at all. You will also have to download the lever and the piece that you screw the silly…

Downloads
146
Likes
35
Rating
4.67
P
PrintablesB1g choppa

Xshot Fury X pusher fix

Had some problems with the pusher catching on the back of the darts in the mag and damaging them, so I did this. Works really well from what I see. The instalisation instructions are shown on the photos. be careful not to remove too much…

Downloads
146
Likes
31
Rating
5
P
PrintablesRedCowl

Xshot MPP Collet Frontend

This mod requires the blaster to be opened, and replaces the stock collet that comes on the blaster. It does re-use the breach from the stock blaster - which is pressed into the “Replacement Internal Mate” as seen below. The collet can go…

Downloads
144
Likes
53
Rating
5
P
PrintablesManta Design

Xshot AEB Motorized Piston Pump MPP Improved Sights

Update 7/31/25: Added hybrid variation of the rear sight Update 7/30/25: Added V2 and V3 of the rear sight. Front sight is slightly lowered to account for dart drop and longer range of pro blasters. Models are print oriented. Cut 6mm…

Downloads
143
Likes
48
Rating
5
P
PrintablesHoneyBajjar

Utonagan handguard for XShot MPP Picatinny Grip Remix

REQUIRED HARDWARE : - 2x M5x30mm socket head screw - 2x M5 Hex nuts (Nylon lock nuts recommended) Can be printed without support

Downloads
142
Likes
33
Rating
5
P
PrintablesManta Design

Sling Mount Xshot Motorized Piston Pump MPP

Designed to snap into one of the five attachment points built into the MPP. Includes two different styles. Models are oriented how I printed them but you may have better luck with a different orientation. These are more of a decorative…

Downloads
142
Likes
40
Rating
5
P
PrintablesDarthTater

XShot Fury Stock / Pull Handle

This is a simple mini stock / pull handle / prime extension for the XShot Fury. You will need to take the existing screw out and drill the hold to 3mm then attach using an m3x25 machine screw.

Downloads
138
Likes
37
Rating
5
P
PrintablesSnail

XShot insanity Wall mounts

2 wall mounts to go on rail. 1 with end cap 1 without.

Downloads
134
Likes
14
Rating
5
P
PrintablesShanEngineering

Zuru XShot Longshot 1" Rail Riser

11" long Picatinny rail lifted 1" from the stock XLS rail. Designed as 5 separate pieces, with the supports each being a separate piece, the rail split into two pieces for ease of print, and a printed pin to index the front with the XLS…

Downloads
132
Likes
28
Rating
0
P
PrintablesManta Design

Xshot MPP Motorized Piston Pump AEB Magazine Bumper

Reload With Peace of Mind Two basic versions included. Original and Shock. The original version mimics the original magazine bumper. The shock version includes cutouts that act as crumple zones(when printed in tpu) and 8mm of extra…

Downloads
132
Likes
44
Rating
5
P

xshot longshot turnaround

When I replaced my x-shot longshot plunger tube the turnaround was brittle and cracked, this will replace that turnaround, use the original barrel o-ring. It need a little bit of support when printing. I printed it at 0.2mm, 2 walls, 15%…

Downloads
129
Likes
32
Rating
4
P
Printablescamdaloon

Xshot Insanity Gun Connector to Nerf Gun Connector

I wanted to connect one of my X▸shot Insanity Blasters to a Standard Nerf Gun but didn't have a connector so I made a connector to connect both together. Category: Parts

Downloads
128
Likes
6
Rating
0
P
PrintablesCorvus

Iron Sights Color Inserts __ Easy Aim __ X-Shot MPP __ Xshot Motorized Piston Pump

Iron Sights Color Inserts __ Easy To Aim + Clearly Visible __ X-Shot MPP The line of sight is parallel to the barrel. Rectangular rear and front sights at same height for easy and quick aiming like classic open sights. It is best to print…

Downloads
127
Likes
38
Rating
0
P

XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU Secondary Mag Release Extension

Secondary mag release extension for the XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU. Hardware Required: 2 - M3x10mm screws Print Orientation: Outer sides facing down.

Downloads
127
Likes
32
Rating
5
P
PrintablesLilja3d

Xshot Excel MK3 - 5 Shot Barrel mod

5 shot barrel for the Xshot Excel Mk3. Just print and swap in the place of the old barrel. Only needs supports for the middle post. Easy. No modification for the shell needed. The AR will be open constantly because of this mod, but it…

Downloads
120
Likes
23
Rating
5
P
Printableshexa spool

Xshot insanity scope

print both part on 100% infill with supports then glue them together

Downloads
116
Likes
15
Rating
5
P
PrintablesRedCowl

Xshot Thrasher Picatinny Stock Mount

This should be a simple print, use supports, I prefer the "snug" variety for this model. I have included a 3mf with the parts pre oriented. Hardware is minimal, requiring the following: 2x m3 nuts 2x m3x10 SHCS Print this with 5+ walls,…

Downloads
116
Likes
30
Rating
5
P
Printablespngu

XShot Motorized Piston Pump Spring Swap Tool

Easy, fast, and great if you're lazy or have short fingers. It fits into the white plug that holds the spring for the MPP More info at -> https://pngu.info/files/xshot-spring-swap-tool/

Downloads
114
Likes
21
Rating
0
P
PrintablesManta Design

Dart Charm Xshot Motorized Piston Pump MPP

These quick print charm accesorries attach to any of the five points built into the Xshot Piston Pump. No need to modify the blaster. Includes a fully printable version and a version that uses real chain instead. Models are print oriented…

Downloads
112
Likes
44
Rating
5
P
PrintablesHL

Xshot Longshot Half Dart Magwells - M3 Heatset Inserts

Heatset inserts (M3 thread, 4mm length, 4.5mm outer diameter, 3.9mm nub)https://www.aliexpress.us/item/3256805034317562.html M3x10mm button head screw See original model for printing instructions. You probably want extra walls so there's…

Downloads
111
Likes
23
Rating
5
P
PrintablesManta Design

SHS Shroud Xshot MPP Motorized Piston Pump

Me: Can I get a sweetheart storm? Mom: We have a sweetheart storm at home. The sweetheart storm at home: All jokes aside, the MPP is an excellent blaster and this shroud aims to improve it futher. Features 28 mlok slots and includes…

Downloads
109
Likes
34
Rating
5
P
PrintablesDunkle Doug

Xshot Insanity Ragefire camera tripod pintle mount

A custom pintle mount for your ragefire. Uses 2 M3-12 screws and any kind of 4mm-ish screw, I used an old drywall screw… It's a little tight, and it's not quite perfect. Either way it works for me and can work for you.

Downloads
107
Likes
15
Rating
0
P
PrintablesManta Design

No Spin Battery Stock Xshot Motorized Piston Pump MPP

Update 9/4/25: Added new versions with the cheek rest built in for easier printing. Marked CR in the files. This extended battery stock secures around the original buffer tube and doubles as an anti-spin clamp. Fits the original Xshot…

Downloads
107
Likes
42
Rating
5
P
PrintablesTrueForm 3D

xShot gel blaster Handel

xShot gel blaster handel

Downloads
106
Likes
15
Rating
0
P
PrintablesdannyL

Xshot Ragefire Chainsaw-style rear grip V1

When modifying my Ragefire, I ran into two issues: The replacement microswitches I had bought were much larger than the stock switches, and wouldn't fit into the blaster easily. The Ragefire's paddle-style grip makes it uncomfortable and…

Downloads
98
Likes
27
Rating
5
P
PrintablesManta Design

Xshot AEB Motorized Piston Pump MPP Display and Charging Station

Update 8/9/25: Adjusted the geometry of every base to better fit the magwell. Designed to fit: MPP Blaster Magazine Up to 15 Darts Barrel BCAR (with or without a shroud) Battery (has a cutout for charging while on the base) Charger Name…

Downloads
97
Likes
40
Rating
5
P
Printablesalbird

Xshot Longshot RIPPCAR

RIPPCAR with bigger OD to fit into the Xshot longshot

Downloads
94
Likes
13
Rating
0
P
PrintablesManta Design

Xshot MPP Motorized Piston Pump No Spin Buffer Tube Ring Clamp

It's my experince that 3D printed buffer tube rings, no matter how tight they were, always needed retightend after a couple of mags. Only accentuating the issue of the spinning buffertube due to the wear on the threads. This easy print…

Downloads
93
Likes
22
Rating
5
P
PrintablesManta Design

Xshot AEB Motorized Piston Pump MPP Buffer tube Stock

Modeled to resemble an old fixed stock but still retains adjustability along the buffer tube. Fits the original xshot mpp battery and also has a secondary space for storage. Models are print oriented and require support. If you really…

Downloads
92
Likes
26
Rating
4.67
P
Printableseggsnham07

XShot Pistol Rival Inline Magazine

This model will convert the XShot Pistol to a 3 shot rival inline magazine from a single shot dart Installing: First you must remove the white piece and spring inside where the plunger is (use some angle cutters or pliers) Next you need…

Downloads
91
Likes
13
Rating
4.5
P
PrintablesDarthTater

XSHOT Fury WCAR

Edit: I added WCARS from 1-12 degrees. I designed this to fit the new XShot Fury blaster. It uses M4x8mm machine screws and M4 Washers (instead of bearings). It seems to work really well and only loses about 5 fps. Let me know how you get…

Downloads
89
Likes
16
Rating
4.5
P
PrintablesNIGHTHUNTER79

XShot Motorized Piston Pump 'Utonagan' handguard - long version (remix)

see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place. A (longer) handguard for the Motorized Piston Pump by XShot. There…

Downloads
85
Likes
20
Rating
0
P
PrintablesRedCowl

Xshot Longshot 2.0 Collet Frontend

To install, unscrew the two screws that are in the pins - Remove the pins - Then pull the stock front end out. Then put the new one in, then put the pins in. Print it flat, like the others. No supports needed

Downloads
84
Likes
20
Rating
5
P
Printablesbasementstudios
Downloads
83
Likes
6
Rating
0
P
PrintablesManta Design

Xshot Break Barrel/Spinshot Accessory Kit

Features No hardware assembly No blaster modification No blaster disassembly Pre-Grouped prints for easier slicing Multi-Color printing (No AMS Required) Extended front end Lowered rail for better accessory placement Raised front iron…

Downloads
82
Likes
36
Rating
5
P
PrintablesRainySkies

Tribute SCAR for 19mm Dart Zone Or Xshot Muzzle ports

A remix of Chance's Tribute PCAR to work with dart zone and xshot 19mm muzzle ports on their pro blasters

Downloads
79
Likes
6
Rating
4.5
P
Printablesmr3yna

Xshot Faze Respawn/ Chaos Meteor 4shot inline clip

This allows the use of half darts in a Xshot Faze Respawn and Chaos Meteor blasters. Attached is the installation guide. Only a screwdriver is needed to complete this mod.

Downloads
79
Likes
10
Rating
5
P
Printablesmr3yna

Xshot Hawkeye Plunger Deadspace cap

This file is for the Xshot Hawkeye blaster. The file is to fill in the deadspace of the Xshot Hawkeye plunger.

Downloads
79
Likes
13
Rating
0
P
PrintablesAlvomane

XSHOT Tripod Picatinny Quick Release (Print-In-Place) | XSHOT Stativ Picatinny Schnellverschluss

EN: The youngsters were of the opinion that a Picatinny quick release for the XSHOT Tripod was urgently needed. In order to be able to enjoy my well-earned rest again, I quickly put together this adapter remix for an M12x45 screw. Thanks…

Downloads
74
Likes
23
Rating
0

Xshot AEB Motorized Piston Pump MPP Buffer tube Stock - Modernized (AR15-like)

Stock cosmetics were changed to look to be more in line with modern types of buffer stocks, my aim was to make it look a bit like standard AR15 stock. A small modification was made to the functional geometry. Channels for inserting M3 nut…

Downloads
74
Likes
19
Rating
5
P
PrintablesManta Design

Micro-Guard Xshot Motorized Piston Pump MPP

At only 60mm long, the Micro-Guard is guaranteed to be the smallest modular handguard available for the piston pump. Perfect for compact builds. Featuring a variety of options ranging from modular to a built-in quad rail. There is an…

Downloads
72
Likes
21
Rating
5
P
PrintablesManta Design

Fat Boy BCAR Shroud Xshot Motorized Piston Pump MPP

The Fat Boy BCAR Shroud features an interchangeable design. Included are 5 different shrouds that friction fit on for easy swap. Also has a built-in clamp that keeps it secure around the bcar and barrel. Uses M3 hardware but isn't…

Downloads
72
Likes
34
Rating
5
P
Printablesnammybd.

XShot Longshot BCAR/WCAR/DCAR

Made to work perfectly with a stock XShot Longshot. I extended the mounting area to 19 mm to get rid of the empty space that can hinder performance. I also added a screw hole on the side of the mount and expanded it to be able to screw it…

Downloads
70
Likes
8
Rating
0
P
PrintablesCarl3D

fully 3d printed Xshot pro mag (15 round capacity)

glue the end cap to the main body before inserting the spring and follower print spring in PETG Cut spring to length in slicer (about 50%longer than mag)

Downloads
70
Likes
11
Rating
0
P
PrintablesManta Design

Tuning Barrels Xshot Motorized Piston Pump

Update 9/4/15: Added chamfered versions for smoother dart feeding. This 54mm barrel reduces the fps without sacrificing accuracy with the included PCAR option. Great for games with young ones or minimized builds. Perfect length to fit…

Downloads
68
Likes
17
Rating
0
P
PrintablesAK3056

Xshot Piston Pump battery bay expander

This was made because what I wanted did not exist, at least, not in the format I wanted. As far as I can tell, this is the only battery bay expander that really tries to match the complex curvature of the back of the Xshot piston pump…

Downloads
66
Likes
13
Rating
0

Xshot Ragefire - Dual Stage Cage

Remix of BuffdaddyNerf 's X-Shot Ragefire flywheel cages, added a second stage for increased performance. Hitting around 200-210fps with Kraken 3s motors into Loki 3s motors, all with Kepler flywheels on a 3s lipo. Hits around 130-150fps…

Downloads
65
Likes
16
Rating
0

Xshot Longshot - Threaded turnaround

Drop in replacement for the Xshot longshot turnaround with a threaded barrel insert to suit worker style barrels. M16 x 1.0 ↓12mm Print upright with the mag end of the turnaround on the print bed. Supports required. O-ring may be tight…

Downloads
64
Likes
13
Rating
5
P
PrintablesFinches Foam

XShot Longshot O-Ring Barrel Collet

This is a quick remix I threw together to allow me and my girlfriend to change barrels interchangeably between our Fury-X and and Longshots, I find the O-Ring system alot nicer to use than a fixed collet as it is alot more convenient. My…

Downloads
63
Likes
9
Rating
5
P
PrintablesLuchathor13

Xshot Piston Pump Picatinny stock mount replacement

This will allow the user to replace their stock Piston pump Stock with a Picatinny version. (Pictured here is a folding OOD Momentum stock) INTENDED USE IF YOU RELOCATE THE BATTERY ( In the photo I have an external XT-60 for a remote Lipo…

Downloads
63
Likes
32
Rating
0
P
PrintablesSwagineer

XShot Pro Longshot Thumb-Mag Release Arm

The stock half-dart magazine release lever on my XShot Pro Longshot seemed a bit small for my thumb, so I made a customizable version of the arm that uses M3 screws for fastening (without the need for heat inserts). It should fit into the…

Downloads
63
Likes
11
Rating
5
P
PrintablesManta Design

Xshot MPP Motorized Piston Pump BCAR Clamp

I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…

Downloads
61
Likes
19
Rating
5
P
PrintablesMiFa

Dart holder for Xshot rail

Holder for 3 dart It can be used on the rail for Xshot. Printing just PLA - without supports. If you want other accessories, don't be shy to write to me. Gun:…

Downloads
60
Likes
4
Rating
0
P
PrintablesGareth Roberts

Zuru XShot Piston Pump - Bolterized

It's a quick and dirty mashup of models made by people more talented than me. The objective is to make what's quite an awkward looking blaster look a little more like a Warhammer 40k Bolter. The picatinny rails are attached with 4x M3x10…

Downloads
60
Likes
35
Rating
0