Spice funnel (Trichter für Gewürzgläser)
Funnel exactly matched to common spice jars.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
- Downloads
- 137
- Likes
- 19
- Rating
- 0
421 models
Funnel exactly matched to common spice jars.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma,…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
Schraubbarer Deckel zum sicheren Verschliessen von Gewürzen und Kräutern der sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Screw-on funnel for the IKEA 365+ spice jars or spice mills. Dimensions: Diameter 69.47 mm Height 51.00 mm Print: Print upside down. Happy printing! If you like it, leave a like or post a make. I'm always open to suggestions for…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET
Mir hat die Farbe nicht gefallen, deshalb habe ich ein eigenes Gehäuse designt. Einfach das alte Gehäuse abklipsen, neues dranstecken und zusammenkleben. Hier habe ich die Fensterdurchführung bezogen:…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Ist leichter zu drehen als das Original und durch den besseren Sitz der Schraube langlebiger. Bei uns seit Monaten ohne Probleme im Einsatz. Viel Spaß damit!
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant
If you like my work and want to support me bringing you new content please consider supporting me on Patreon Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
PLA is ok, I would recommend ABS because it has some flex. 0,2 mm Resolution 40 % Infill Tree-Support
This is actually a re-mix of www.thingiverse.com/thing:3200739. However I couldn't use the URL in the description
I took Fotis Mint’s Nazgûl model and resized it, cut out the sword and a cylinder down into it to hold a pen. I have that model uploaded as well. Then I took the one ring and sized it up. Added a floor and dropped in the Nazgûl figures. I…
In diese Aufputzdose sollten alle unterputz Schalter und Steckdosen passen, die nicht tiefer als 34mm sind. Für größere Objekte kann das Modell mit gängiger Software einfach ein wenig "gestretcht" werden. Lochabstand ist 60mm Category:…
Mit dieser neuen Version von meinem beliebten Zollstockanschlag ist es nun möglich nicht nur das erste Glied zu nutzen, sondern alle weiteren auch, da er sich nun über das Gelenk drüber schieben lässt. Der Anschlag ist ergonomisch geformt…
This is an Mount for a GoPro Hero 8/9 suited for the Iflight XL5 Frame like the Nazgul 5 and the XL7, DC5/7. I printed it without support with a resolution of 0,2mm. You might need to drill the holes for the mounting screws to a bigger…
Tried to make this as true to the original as possible. This fits a Nazgul5 v2 perfectly. Print with no supports in the original orientation I have provided. For a full set, print two of the left and two of the right. I highly suggest…
Since the PHILIPS Pastamaker is a great food extruder, I wanted to make my cookies with it. Sadly there was no original cookie disc in my area available, so I decided to design my own. It's printed in PET-G, so at least the material is…
Created by Rene Skøtt, this simple but beautiful mount was created to stand abuse from the freestyle life. The design is well thought, giving extra support to those parts that tend to break apart. iFlight tends to have kind of a standard…
Thank you so much to inlinerbutch who made the inital stand that I remixed from! This is a fantastic stand that folds up nicely to pack up my G90 . Unfortunately there were some sharp right angle corners on the stand that happened to snap…
This replaces the open area for golf balls on the EZGO golf cart for rocker switches and charger plug. You can find the rockers switches thru the link below. Switches: 3 Gang 5 Pin Rocker Panel with Voltmeter & USB [Amazon Link]
The Lord of the Rings - Nazgul on Horse
Die Kabelhalterung wurde während eines Twitch Streams entworfen, modelliert und gedruckt. Sie ist so entworfen, dass man sie beliebig häufig öffnen und schließen und einfach an Möbeln befestigen kann. Das Gewinde wird mittels Lötkolben in…
This is my first batch of the Kurzgesagt birds as fridge magnets, you can find the second batch here . As a big fan of the Kurzgesagt channel on YouTube , I made some matching fridge magnets. Everyone who knows this channel knows all the…
nazgul xl5 mount crossfire buzzer gps PS. Mogę wydrukować i wysłać na terenie Polski.
This is my second batch of the Kurzgesagt birds as fridge magnets, you can find the first batch here . As a big fan of the Kurzgesagt channel on YouTube , I made some matching fridge magnets. Everyone who knows this channel knows all the…
I designed this adapter since I wasn't satisfied with the online available ones. I am using a Nazgul5 V2 with its XL5 V5 frame and an ExpressLRS 2.4GHz T-Antenna by HappyModel. To get the antenna into the printed part you might have to…
Los Nazgûl son un grupo de nueve espectros al servicio del Señor Oscuro que aparecen en la novela de El Señor de los Anillos escrita por J.R.R. Tolkien . También son llamados Espectros del Anillo y Ulairi . Just Scale and Print, use Tinny…
Nazgul - Le Seigneur des Anneaux Base de travail généré par IA. Retravaillé sur Nomad Sculpt. Images tirées de la visionneuse 3D : https://www.printables.com/model/1699621-3d-viewer-visionneuse-3d-android-ios-windows-linux Autres liens :…
This replaces the stock panel with one that will take the OEM switch with the electronic battery meter found on Amazon. Battery Meter: Automotive Authority Battery Indicator [Amazon Link]
A replacement Go Pro Mount base for the **new** NAZGUL XL5 ECO frame. Reinforced around the bolt where it could split! The new frame used on the nazgul eco is still called the XL5 but does not fit the old go pro mounts, meaning you have…
fischertechnik Gear Z20 for ZGB25RP and JGA25-370 DC motors with 4mm D-Axle Category: Robotics
Do pobrania szablon do zgrzewania ogniw 18650 na 8 szt w jednej linii, pod taśmę o szerokości 8mm. - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich…
Replacement arm protector for iFlight's Nazgul Evoque F5 (V2) Print in TPU No supports required
Schwibbogen mit Ständer.
Dieses Teil ist zum reinigen von Trapezgewindespindeln mit 8 mm Durchmesser. Print Settings Rafts: No Supports: No **Resolution:** 0,2 Infill: 25% **Filament:** 3DJake / extrudr PLA Tough / NX2…
Schnelles Geschenk für deine Liebsten. Auf einer Seite kannst du z.B. einen Geldschein und auf der anderen Seite eine Blume in die Reagenzgläser reinstecken. Das Modell ist für 16mm (Durchmesser) Reagenzgläser erstellt.
Printed in PETG with 0.25 layer height (Input Shaping Structural) Version with a hole on the side for a cable and no hole for feeding the wires from the back for 1x/2x DE: Aufputzgehäuse 1-fach und 2-fach für Gira Steckdosen- und…
GEP-M1025Q Gps mount for iFlight Nazgul Eco Might fit other gps units and quads Printed in 95a tpu 10% concentric infill. If to tight of a fit over size a couple percent or so.
Here's a temporary replacement arm for a Nazgul 5 drone, It works OK while you are waiting for a real replacement, doesn't survive crashes though, so print a few if you're as poor a drone pilot as me! Print instructions PLA 60% infill -…
Gränzgänger Schlüsselanhänger (bitte runter skalieren)
High base for Nazguls miniatures of War of the Ring 2nd edition board game. Base is remixed from dadeq90 ( https://www.thingiverse.com/thing:3505073 ), stand is addon. Nazgul base is oval, not round , so watch out when fitting miniatures!…
Printed mine out of Rosa3D CarbonLook PETG. 0.2mm layer height, upside down with snug supports on the build plate.
Side plates for the iFlight Nazgul V5. Provides a bit more protection to the electronics without adding much weight. Provides a port to easily insert a magnetic USB cable such as this one:…
Heart for a flower in a test tube (diameter 25mm) with an engraving: - Zum Muttertag - For Morther's Day You will need to add some supports.
If you need to justify your 3D printer cost, think about printing these dampers as replacement for your worn ones. Your better half will really appreciate that! I first tried PETG as material for these but after some month they broke. So…
Inner diameter 27.5 mm Height of the axis from the ground 60 mm For other diameters easily scale it
Mein Heimatverein FC Erzgebirge Aue - früher BSG Wismut Aue
Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…
Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. Damit können Gewindeeinsätze rechtwinklig in Bauteile eingebaut werden. Wenn der Druck korrekt ausgerichtet, wird keine Unterstützung benötigt (siehe 3mf-Dateien). Die…
A mount for the camera of the DJI 04 Air Unit Pro. I recommend to use TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the antennas…
Print orientation ~45deg as shown in image. There are multiple version with 2 variables wall (H)height and (R)diameter show as red lines in image. Default is H=5.2mm. Diameter 3.2mm for PLA and 2.8mm for TPU print Most vanilla TPU print…
Das ist ein Ersatzgehäuse für das Heidenhain HR 330 Handrad. Es werden Gewindeeinsätze für M3 benötigt. Diese Dateien sind nicht separat für den 3d Druck vorbereitet und sind nicht ganz einfach zu drucken. Um die Kanten ist eine Nut…
This print was inspired by the youtube channel's -“Kurzgesagt – In a Nutshell”- mascot. https://www.youtube.com/c/inanutshell/featured I printed the beak and the eye with 99% scale, and the leg 101% percent on the Prusa MK3S and the parts…
Holder for GPS, VTX Antennas (in my case DJI O3, but others with SMA adapters also work) and a fixed XT-60 for easy plug in of the battery. Print the main part in TPU and two spacers in a rigid material like PETG or PLA. The advantage of…
This is a dual antenna mount for the Walksnail Avatar HD system with two antennas. There's a version without support and a version with longer antenna sleeves which require support. Have fun! Print Settings Printer: Self built Rafts: No…
Since I was unhappy with the original GPS mount produced from Iflight because it broke my UART port of my GPS module, I designed this model. The main advantage in comparison to the original version is that the UART-Port is supported by…
Ein Schutzgehäuse für die Canon G7X MkIII , welches ich hauptsächlich für den Transport nutze. Ähnliche Kameramodelle sollten auch passen. Wer die Trageschlaufe auf der linken Seite hat, muss das Modell spiegeln. Ich druckte die Box in…
Replacement for the upper hinge of the door of the Hauck safety guard for stairs and doors. Print sideways like in the photo so the force is not with the layer lines otherwise it will break very soon like the original part.
Super Geschenksidee für kleine oder einzelne Blumen. Sieht auch in Kombination mit Geld super aus. https://www.amazon.de/dp/B0C2441XRY?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 Viel Spaß beim Drucken
This is a rear mount for both a BN220 GPS unit & a TBS crossfire immortal antenna to fit the iFlight XL5V5 frame (Drones such as the Nazgul5). Unlike others out there, this doesn't replace any of the existing parts. The rear frame bars…
Made a new mount for a cheaper M10 GPS from TBS for the iFlight Nazgul Evouqe F5. Print Settings: TPU 5 walls 35% Infill 5mm brim for stability Print like shown on the picture
This is a remix. Changed it so that it fits in front of the Nazgul V4 and V5. Fits every other 6mm standoff. Dimensions from hole to hole are 24.5mm. It also fits in the back if you squished the arms together. I found out after printing…
This is a small stand for a ZG-204Z/ZG-204ZL Zigbee PIR motion detector ( like these ) with a ball joint so you can position it just right.
2xFrame and one of each TPU parts is needed. The mount uses the stock bolts (M3x6 top and bottom, M3x10 for the front bar).
Print with TPU as the model does need to bend to fit. Does not need supports. Set 0 bottom layers to make the infill visible to make fancy patterns.
Created in Tinkercad for modeling purposes, not for printing. Category: Other
Geprc / Phisital mark5 BZGNSS BZ-181 GPS mount. Press-fit mounting, made with zero tolerance. Print in PLA only. Tested in free flight and freestyle. Nothing falls out, it holds tight.
ZGA37RG DC Motor tight fit 4mm screws and nuts custom Design. Comment with any problems and I'll do my best to help you fix it.
Für alle, die Unterputzdosen lieber Aufputz montieren wollen
🛡 Mückengitter für die Notentlüftung im VW Grand California 600 Dieses praktische Mückengitter wurde speziell für die Notentlüftung über der Küchenzeile im VW Grand California 600 entwickelt – ideal für warme Sommernächte, in denen…
Our basement windows urgently needed protection against the invasion of spiders if we wanted to sometimes ventilate the rooms. As the windows are only 90x40cm even the smallest type would have been far to large which equals a lot of…
The stock tailpiece for the iFlight Nazgul Eco frame had an angled XT60 connector, which made it impossible to position LiPos with short wires properly. This set has original XT60 and SMA connectors in better positions and has space for a…
It the simplest holder i could come up with. May add a ball-joint to the back, in case i want to mount in a differnt one, depends, how well it will function.
mount for 18mm gps modules
Good settings: 0.4 mm nozzle 0.2 mm layer height random seam position no support no brim 70°C bed temperature fuzzy skin outside walls 0.2 mm fuzzy skin thickness 0.4 mm fuzzy skin point distance Prusament PLA Pistachio Green
fischertechnik Gear 10 for ZGB25RP and JGA25-370 motors Category: Robotics
fivefold Test tube holder for 20,6mm diameter test tubes 5-fach Reagenzglas Halter für 20,6mm Durchmesser Reagenzgläser Category: Other
I have purchased the Hauck Clear Step Autoclose 2 door safety gate. Unfortunately, the door cannot be locked when it is open. That's why I created this simple lock. It works very well for me.
Tpu parts to mount gopro camera, Iflight FC07704 gps module and tbs immortal t antenna. Printed in prima easyprint tpu 95A. with 0.6mm nozzle, 0.3 layerheight. 230 degrees c nozzle. 50 degrees c bed. 40% grid infill. Assembly parts. 2x…
Geprc / Phisital mark5 BZGNSS BZ-181 GPS mount TPU ver1, ver2. Printed in TPU 95A.
This is a small adapter plate for a marine charing plug made for the EZGO TXT with the Madjax Storm body kit. https://www.amazon.com/dp/B08THJRX76
Praktisches Aufputzgehäuse für Standard-Steckdosen oder Schaltereinsätze. Das Modell verfügt über integrierte Befestigungspunkte, Kabeldurchführungen und eine stabile Konstruktion mit abgerundeten Kanten. Optimiert für den 3D-Druck mit…
Due to the pandemic, students were unable to attend the "Introduction to Laboratory Practice" course at the University of Oldenburg. I have adapted the course content and the laboratory equipment to experimentation in a private…
This is a mount for the BZ-181 BZGNSS to attach to the arms using a zip tie No support needed, print with “ears” to the plate. Print in TPU.
A CRSF + FlyFishRC M10 mini GPS holder for the iFlight Nazgul Evoque frame based on my base GPS holder and DJIBryan 's excellent holders for other GPS units .
The yellow part is broken. I tried to glue it together but it lasts not very long so I rebuilt it with Fusion360.
"Milo" // The Sleepy Owl Multi Purpose Companion ✨ Elevate Your Space with Modern Serenity 🌿 A quiet, minimalist owl designed to cradle your favorite succulents or organize your daily essentials with a peaceful, high end aesthetic. 👉…
A mount for the antennas of the DJI 04 Air Unit Pro. I recommend using TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the camera…
Mount for BLITZ M10 GPS V2 for iFlight Nazgul Evoque F5X iFlight FPV M8Q-5883-GPS Module V2.0 Mount
This mount is to be used in a 25x25 pattern, holds the BZ-181 GPS from BZGNSS. Print in TPU, no supports needed. Orient it as in the picture “ears” against the printing plate.
Eine Sortierbox für 3d Einpressgewinde von M2 , M2,5 , M3 , M4 , M5 , M6 , M8 für meine Werkstatt mit Verriegelung im schubladenbereich.Eine trennwand zum Einklipsen ist jetzt auch noch mit dabei!!!
Ersatzgriff mit einem Lochdurchmesser von 25.7mm
I made this because sometimes after a crash the prop will bend towards the motor cables. I've got the dimensions down to the point where it should be completely glue-less, it simply clips on the arm and holds. Happy Flying!
Halter zum sicheren Verstauen von Gewürzgläsern von Kania (Lidl) mit überstehender Seitenwand um ein Herausfallen aus dem Regal zu verhindern. Passend für 200mm Regalbretter. Holder for safely storing spice jars from Kania (Lidl) with…
One of the better and more popular PIR motion sensors with radar function. Model ZG-204ZM on Zigbee. Unfortunately, the sensor is designed for wall mounting. That's why I designed a stand in which it can be mounted. The stand is best…
I wanted to update my iFlight Nazgul Eco 5 DC with a DJI O4 Pro system, so I have no need for the camera mount up front anymore. I tried to find free STLs of any modification like that, but found only paid options. So I just made my own!…
Zero Gravity Desk — ZGD V1 Sometimes an idea begins with a memory. The Zero Gravity Desk (ZGD V1) was born from a personal memory and from a simple question: can 3D printing and imagination help make an everyday task a little easier for…
Die Nazgul 5v3 (analoge Version) hat hinten unter der Antenne bereits (wie ich vermute) eine Befestigungsmöglichkeit für das optional erhältliche GPS-Modul. Ich habe allerdings das Foxeer M10Q 250 GPS Q5883 Compass Module separat gekauft…