46 models
TL;DR This is a 3D Model of a virtual route in Zwift. Collection Zwift Motivation 3D printing makes the elevations of your tour visibly. Very nice as trophy and those who did it know how hard this track is. Let's get started Just…
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for one variant
TL;DR This is a 3D Model of a virtual route in Zwift. update 2023.0325 The first version was made with a wrong GPX track Collection Zwift Motivation 3D printing makes the elevations of your tour visibly. Very nice as trophy and those who…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
Practical bicycle handlebar adapter, you can use only two of the rubber bands provided by Zwift.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
This tablet/phone mount is for the Zwift Ride stationary bike. It is very sturdy. The long clamp opens up 255mm (10in), and the normal clamp opens up to 230mm (9in). No additional hardware is required. For detailed installation…
Update: I've added a new model for printing which fixes the wrong counterbore holes (recommended by MG-Grafik-Design - many thanks!) This new model is not tested on a real Zwift Ride (since I don't have one atm)! But I assume it will fit…
I've released a newer version that is better looking, requires no additional hardware, and is more secure. Only downside is it uses more filament. It can be found here: https://www.printables.com/model/1160468-tablet-holder-for-zwift-ride…
Update2: Der Beinhalter liegt jetzt als STEP File zum download bereit. Update1: Jetzt gibt eine kleine Tischplattenversion die auf 250er Druckbetten passt :) Hier meine Version eines Bestelltisches für Fahrradtrainer oder Smarttrainer wie…
Tool-less front rocker foot for the Zwift ride, consistent floor level with my Kickr Core rocker foot. I printed this out of ABS with 40% gyroid infill.
TL;DR This is a 3D Model of a virtual route in Zwift. Collection Zwift Motivation 3D printing makes the elevations of your tour visibly. Very nice as trophy and those who did it know how hard this track is. Let's get started Just…
Also, hier ist es! Ein schlanker, PLA-fähiger Tennisball-Wippfuß für das Zwift Ride Bike in Kombination mit den Kickr Core 2 Wippfüßen Das Ziel bei der Entwicklung dieses Fußes war geringer Materialverbrauch passend zu den Kikr Core 2…
Got my Zwift Ride, but no tablet holder, so I designed my own. It can hold tablets of various sizes, thanks to multiple holder size options (the top part). You can choose between an Alpe d'Huez design or a plain version. The design was…
I have a Trek Roscoe 7 that would not fit on the Zwift Hub smart trainer due to it having a Boost 141 QR rear. This adapter allows the Zwift Hub to properly connect to a Boost 141 QR bike. I printed the adapter out of Carbon Fiber Nylon…
Few things to consider: uses the existing screws that came with the cover I re-drilled the holes with a 1.5mm drill bit remember to place the battery the correct way Wahoo and Garmin (¼ turn) files included some fine tuning with an…
100% prints at approx. H 68mm x W 72.5mm x D 5mm
With this adapter you can prevent the lower buttons from being hidden and pressed down. The stability on the handlebars is necessary for riding ZWIFT. I hope you enjoy it. Printed at PTEG
All merits to @CoolBlackCat_73562 as this model was a modification of his model to adapt it to use it ZwiftHub one
I designed a smaller top plate for printing with my Bambulab P1P (240 x 200 mm). The smartphone holder is adjusted for bigger phones (with case) (78 x 13.5 mm). Additional holder for sliding in the tablet clipped into the hex-pattern.…
The Zwift play controllers are designed to be used on drop bars with a curved 20mm profile bar to attach to. These adapters allow you to install the Zwift Play controllers onto flat triathlon bars 20mm (30mm with tape wrap) for indoor…
Alpe d'Huez / Alpe du Zwift The Alpe du Zwift is a virtual recreation of the Alpe d'Huez in the popular cycling simulation game Zwift. It is 12.5 kilometers long and has an average gradient of 8.5%. The climb features the same 21 hairpin…
Table to place your laptop or ipad/tablet in front of your bike. You can also put some bars and your bidon on it so you're ready for you efforts :-). I included the stl's for the table and the step file for the feet. i did this so you…
See blur_457's original notes here and installation instructions here. The difference is that you don't need to use the metal dovetail block from the original cap, since the dovetail can be printed. I printed it out of PETG, but any…
The Zwift Hub indoor trainer is a decent piece of kit, but it lacks a handle. This handle is to move it around while the bike is attached, so you aren't hauling all the weight on your precious bike. I wouldn't carry the hub around just by…
I wanted a small area on my bike where I could rest my phone while cycling indoors in the winter. Using Zwift companion app, it's really convenient to have it on the handlebars. At the same time I didn't want something permanent since I…
The Zwift rubber band mounts were ok but were never very solid, sliding as my workout progressed, and I had to mount them too far from my grips due to the shifter and brake arrangement. Their 3D printable mounts were a good improvement in…
My better half and I share the same Zwift Ride indoor bike. I am significantly taller than she is, meaning that we need to constantly readjust the frame when we want to use it. In order to make it faster (for her) I designed this clamp…
If you like me 50+ and your eyesight on short distance fades slowly, you might want to use the Zwift companion app on your tablet instead your phone. Unfortunately I could not find a bike mounted tablet holder for portrait mode. I bought…
Modifying the Zwift Ride saddle mount allows you to move the saddle position forward by +60mm.The original saddle clamp can be fitted to the 3D-printed part. You will need to press 2x 2pcs. M6 threaded inserts into the printed part so…
This print fits below the feet bars of a Zwift Hub (One) and allow to fasten the Hub via 20mm velcro straps. Additionally these mounts can prevent the hub from sliding side to side (if mounted as far outside as possible directly next to…
You need one M8 and M6 screws for higher stability. Printed in PETG with 4 outer walls and 5 top an bottom layers and 40% cubic infill. Just mirrow the part in your slicer to have both sides. I printed it laying flat in order to have…
I adjusted the leg width to 24mm to fit a standard Belgian Broomstick, a cheap and common way to get legs for the table.
I need to store the Zwift Hub One home trainer on a corner that is currently occupied by a chair that is not tall enough to have the necessary clearence for storage so I came up with an adapter to rise the chair enough to make it all fit.
Tickness adapters for 22mm sticks for support table : https://www.printables.com/model/164027-zwifttisch-biketrainer-table
I installed an old MTB on my indoor trainer with a 55mm chainline crankset and created this adapter since the chain was not even close to being straight. V2 Cog is apparently adjustable from 37 to 43mm. You just use the following parts of…
I designed my own table for indoor trainings sessions on the bike. It's designed in a size to fit phone, laptop, tablets, bottles and all the other stuff in might need or want to have in reach. I used the Creality Ender-3 V3 Plus with…
Designed for the 2022 iPad (10th generation). Compatible with the Rollei Rock Solid tripod. It fits even with a protective case, and the charging port remains accessible so you can charge it while mounted. On the back, it has two holders…
WORK IN PROGRESS! Still refining the size and making small changes to the geometry. SRAM AXS Shifter Dummy for Your Indoor / Zwift Bike Want that authentic SRAM AXS feel on your indoor bike without installing the expensive originals? Then…
I made an organizer for my remotes, HR monitor, gloves and headphones for my Zwift setup. Added the step file as well to allow for changing dimensions of features to fit your need. Printed in PETG, 0.2 mm layers, 3 walls, 35% infill.…
This tablet mount is for the Zwift Ride stationary bike. It is very sturdy. The long clamp opens up 255mm (10in), and the normal clamp opens up to 230mm (9in). No additional hardware is required. For detailed installation instructions…
Update: I've added a new model for printing which fixes the wrong counterbore holes (recommended by MG-Grafik-Design - many thanks!) This new model is not tested on a real Zwift Ride (since I don't have one atm)! But I assume it will fit…
Tool-less front rocker foot for the Zwift ride, consistent floor level with my Kickr Core rocker foot. I printed this out of ABS with 40% gyroid infill.
See blur_457's original notes here and installation instructions here. The difference is that you don't need to use the metal dovetail block from the original cap, since the dovetail can be printed. I printed it out of PETG, but any…
I adjusted the leg width to 24mm to fit a standard Belgian Broomstick, a cheap and common way to get legs for the table.
Table to place your laptop or ipad/tablet in front of your bike. You can also put some bars and your bidon on it so you're ready for you efforts :-). I included the stl's for the table and the step file for the feet. i did this so you…
The Zwift rubber band mounts were ok but were never very solid, sliding as my workout progressed, and I had to mount them too far from my grips due to the shifter and brake arrangement. Their 3D printable mounts were a good improvement in…
I made an organizer for my remotes, HR monitor, gloves and headphones for my Zwift setup. Added the step file as well to allow for changing dimensions of features to fit your need. Printed in PETG, 0.2 mm layers, 3 walls, 35% infill.…
