P
PrintablesEpp
Bosch Sortimo L-Boxx 102 / 136 / 238 / 374
This is a CAD drawing for Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374.
- Downloads
- 2,642
- Likes
- 175
- Rating
- 5
Search results: 102
Counting matching models…
P
PrintablesxSteve
Lamp Shade 0102
Here is a twisty, crisscross lamp shade design to allow soft light on the corner of a table. There are no wires to cut, splice or solder together to make a base. It is designed to fit on a 4 inch/10cm led display base. The printed shade…
- Downloads
- 2,551
- Likes
- 495
- Rating
- 5
P
Printablesbernard maurin
Bosch Sortimo L-Boxx 102 / 136 / 238 / 374 STEP files
Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374 in STEP format for those who don't have Fusion 360
- Downloads
- 1,423
- Likes
- 93
- Rating
- 0
P
PrintablesYvrogne
LEGO Discovery Space Shuttle (10283) wall mount
Remove the wheels as in the pictures (see picture 4 & 5) Space shuttle : Fixed with wall plug (see picture 8) and Double-Sided Tape for nose gear (see picture 6) Slide the front part (red axle) into the “shuttle hook nose gear” (see…
- Downloads
- 1,238
- Likes
- 225
- Rating
- 5
P
PrintablesNebulaNoob
Team Eggman Figurine Set: Eggman, Metal Sonic, Infinite, E102-Gamma, Sage, and Chaos Amiibo Figure's
Fourth set of Sonic figures based on Dr. Eggman and other Sonic villians. Set includes · Modern Eggman · Metal Sonic · Chaos · E102-Gamma (Still Painting, will update when done) · Infinite (Both with the blocks as a base and Infinite and…
- Downloads
- 909
- Likes
- 93
- Rating
- 5
P
Printablesdym801
Casiers Bosch L-Boxx 102
Différents casiers pour meubler une L-Boxx Bosch taille 102mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…
- Downloads
- 849
- Likes
- 175
- Rating
- 4.83
P
PrintablesFileForge
Ruger 1022 Easy Bolt Loader
this little insert can be used to hold the charging handle back to allow you to easily slide the bolt in. This insert will hold the charging handle guide rod down also. once bolt is set just pull it out by the tab.
- Downloads
- 596
- Likes
- 70
- Rating
- 5
P
PrintablesDavisSgt
Fingertip Logitech G102/103/203 mod - Zeromouse inspired
Fingertip mod for Logitech G103/203, inspired by OptimumTech's Zeromouse. Changed some things to allow usage of side buttons, scroll wheel and clamp for strain relief. Total weight is around 40g with PLA. 35g for side-buttonless version…
- Downloads
- 568
- Likes
- 34
- Rating
- 5
P
Printableshackerbijay
Display mount (Cover)7inch HDMI LCD , 1024x600
7inch HDMI LCD (H), 1024x600, IPS, supports various systems, capacitive touch, supports Raspberry Pi 4. looks good and protected. Display link to Buy:…
- Downloads
- 488
- Likes
- 30
- Rating
- 4.75
P
PrintablesSvB
MJX 10208 chassis dirt shield
Buy here: https://3dreamforgebyaandn.etsy.com/uk/listing/1861948638/rc-mud-guard For maximum toughness use TPU however PLA works well too. BOM 2 x M3x20 Reuse the original M3x14 bolts to secure the shield to the towers.
- Downloads
- 450
- Likes
- 21
- Rating
- 5
P
PrintablesJEdwardS
Mini-z semi truck body 98mm and 102mm
3d printed racing semi truck body for Mini-z 102mm and 98mm wheelbase I haven't tested the 98mm version with the stock mr03 98mm pod!!! This remix works with the stock pod:…
- Downloads
- 444
- Likes
- 59
- Rating
- 5
P
PrintablesAndy L
FTDI CP2102 USB to TTL Adapter HW598 Case (Thingiverse Remix)
So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…
- Downloads
- 438
- Likes
- 24
- Rating
- 4
P
PrintablesMax
Bosch Insert L-Boxx 102 Gen. 4 UPDATED
L-Box 102 insert no support needed The letters must show to you (for the right orientation). You can mix the boxes in the middle like you want, but the left and right side (picture red boxes) must be printed and used like on the pictures.…
- Downloads
- 436
- Likes
- 77
- Rating
- 5
P
PrintablesSimple3D
1950's Melitta 102 Coffee Pour-over Filter
My mom recently gave me my Grandfather's 1950's Melitta 102 porcelain 3 hole coffee filter. I thought it would be a good test for my Revopoint POP 3D scanner. I was able to make an autosurface solid model from the point cloud, but I…
- Downloads
- 423
- Likes
- 54
- Rating
- 5
P
Printableskawaii__neko_
LEGO Discovery Space Shuttle (10283) wall mount - screws only remix
I have just quickly added screw holes. I don't trust tape.
- Downloads
- 375
- Likes
- 42
- Rating
- 5
P
PrintablesFr3D
Lego Mustang 10265 Wall Mount Vertical
Quick part to support your Lego Mustang on a wall!
- Downloads
- 357
- Likes
- 33
- Rating
- 5
P
Printablesrsfuhrer
C-102 Avro Jetliner
The Avro C-102 Jetliner was a prototype aircraft designed and built by Avro Canada in the late 1940s. First flown on August 10th 1949, this was a 4 turbojet engine passenger aircraft that was only beaten to the air by the de Havilland…
- Downloads
- 342
- Likes
- 15
- Rating
- 5
P
PrintablesJohn Printalot
Ruger 1022 stand
I printed in PETG with 20% infill and 4 walls. I may skeletonize in the future to save print time and filament. Stand is in inch format and is 6.5in tall. Enough room for pistol grip stocks. It is in inches, forgot to export in MM. Scale…
- Downloads
- 342
- Likes
- 57
- Rating
- 5
P
PrintablesKAYMOST
OpenZ V16 Pontiac GTO 1965 102mm Wheelbase
Pontiac GTO body, made for open Z V16 model Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not matter PLA Does not matter Notes: It is advisable to print this…
- Downloads
- 329
- Likes
- 40
- Rating
- 0
P
PrintablesTravis
John Deere 1025r floor plugs
Floor plugs for a 1025r John Deere. May fit other models. Fits the main floor holes only. You could trip it to fit other I suppose.
- Downloads
- 329
- Likes
- 21
- Rating
- 5
P
PrintablesTJDesign
LEGO(R) Porsche 911 (10295) Wheels – Fuchs & ATS “Cookie Cutter” Rims, 30.4×20
Give your LEGO® Porsche 911 (set 10295) the classic wheels it deserves! 🏁 Two iconic Porsche rim styles, made to fit the new 30.4×20 LEGO® tires: • ATS “cookie cutter” – factory standard on many classic Porsches • Fuchs – the legendary…
- Downloads
- 318
- Likes
- 29
- Rating
- 5
P
PrintablesOvernau
Paper Holder HP P1102w/P1102
My initial Paper Holder HP P1102w broken. Note: this part (paper holder) can to replace part number rm1-6903-000cn I didn't find appropriate part, so desided to create by myself. So, if it help to someone to solve the same problem - will…
- Downloads
- 312
- Likes
- 17
- Rating
- 5
P
PrintablesMike
Battery Power Adapter or Contact Cover for use on Ryobi P102 18V Battery
This is an adapter I made to enable me to use a Ryobi P102 Battery as a power source for my fish finder. The tow holes in the top of the adapter allow the ends standard female spade connectors to pass through and then I added wiring and a…
- Downloads
- 311
- Likes
- 31
- Rating
- 5
P
PrintablesSvB
MJX Hyper Go 10208 shock lift
Buy here: https://www.etsy.com/uk/listing/1876691283/mjx-hyper-go-10208-shock-lift This mod dramatically increases the droop and suspension range by moving the mounting point up 8-11mm. There is no drive shaft binding. ride height: front…
- Downloads
- 304
- Likes
- 23
- Rating
- 0
P
Printablesthall72
Lego Compatible (10247.dat) Plate 2 x 2 with Hole and Complete Underside Rib
This model is compatible with the lego system.
- Downloads
- 287
- Likes
- 20
- Rating
- 0
P
Printableshitchhiker4200
Soil Blocker for 1020 Trays
There are some great soil blocker designs out there, but I had a need to fill a bunch of 1020 trays and I knew I could fit the footprint on the Prusa Mk3. The blocks are approximately 38mm square and fill the tray in a 6 by 12 pattern.…
- Downloads
- 283
- Likes
- 43
- Rating
- 5
P
PrintablesGanjew420
klipperscreen Case for 7" 1024x600 IPS touchscreen and Raspberry Pi4
case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.
- Downloads
- 263
- Likes
- 26
- Rating
- 5
P
PrintablesTraube
Bosch L-Boxx 102 Inlays
German: Hallo! Ich habe für meine Bosch L-Boxx 102 mal ein Inlay gebastelt! Es ist am besten, wenn man den Boden und den Aufbau separat druckt ,um ihn anschließend mit Uhu Hartkunststoff zu verkleben! Druckt also die Noppen vom Boden nach…
- Downloads
- 261
- Likes
- 62
- Rating
- 0
P
Printableskencyf
Logitech G102/203 zerømouse Mod (For 2ⁿᵈ gen LIGHTSYNC ONLY)
This is a remix of DavisSgt's zerømouse mod for the Logitech G102/203, which was initially inspired by optimumtech . DavisSgt's model will not fit if your G102/203 is the 2ⁿᵈ generation LIGHTSYNC version. You can verify by checking the…
- Downloads
- 251
- Likes
- 14
- Rating
- 0
P
PrintablesLP3D
1025 - 10 inch rack modular mounts (2026.1)
This is a collection of modules for my 1025 modular system. This collection will grow over time, and I take requests for things to add to this system. Note! Not all modules are represented in the photos! A full list is available below.…
- Downloads
- 246
- Likes
- 81
- Rating
- 5
P
Printablessandsturm
L-BOX 102 Inlays
Inlays in different sizes for LBOX 102 . For the smallest inlay (single), a topper can be printed to add more space in the box for parts/screws of small amounts. I used a 2cm foam material for the lid of the box. I glued that foam to the…
- Downloads
- 226
- Likes
- 38
- Rating
- 4.5
P
PrintablesRoman Hujer
Modular planetary gearbox 1024:1
Modular planetary gerabox 1024:1 (4:1, 16:1, 64:41, 256:1) for NEMA17 stepper motors Design in FreeCAD source on https://github.com/romanhujer/Modular-gearbox How to this working? See my video: https://youtu.be/6pDPNkWU2vo Other…
- Downloads
- 222
- Likes
- 47
- Rating
- 5
P
Printablesendoril
Body holder spare piece for 1:16 RC car (SCY 16101, 102, 103 etc.) (.scad file included)
When this little beast lands on rooftop, this piece can easily break. I designed a spare, much stronger part. Fitting perfectly with 0.2mm layer height print. Make sure you slice with 100% infill. No need for supports. No need for raft or…
- Downloads
- 220
- Likes
- 41
- Rating
- 5
P
PrintablesYan1 ALAN
7 Inch Raspberry Pi Touch Screen 1024x600 IPS LCD with Speaker for Raspberry Pi 5 4 3B+ 3B / Jetson Nano PC Secondary Screen case
Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.
- Downloads
- 219
- Likes
- 22
- Rating
- 0
P
PrintablesMateusz_L
Paper tray for HP 1022 Laserjet
You need to use supports
- Downloads
- 218
- Likes
- 18
- Rating
- 0
P
PrintablesCraig
Lego Model Stand Shorter Arm (X-Wing 75102)
The original is very well designed and perfectly balanced. I couldn't fit the X-Wing on my shelf with the foils deployed so I remixed the arm. With the modified arm everything now stands 295mm tall with X foils extended. The arm is…
- Downloads
- 216
- Likes
- 47
- Rating
- 5
P
PrintablesRobotDoctor
Logitech G203 G102 Mouse Backplate (Larger Pegs)
Remix of UL G203 by K4mi1, Made the pegs bigger because they were breaking on me and added a screw-less version. Flip it 180 degrees so the pegs are pointing up, use tree support, use either 10% or 100% fill. Sand until the palm grip is…
- Downloads
- 210
- Likes
- 24
- Rating
- 0
P
Printables4Designs
Magnetic wheels for Porsche ''GT3 RS 992 Silhouette'' by pino1021
I made theses wheels to complete the Porsche GT3 RS 992 Silhouette Wall Art by pino 1021 They can also be used for others Porsche 911 silhouettes, or even other cars if you want. Print I suggest printing them at the lowest resolution your…
- Downloads
- 208
- Likes
- 17
- Rating
- 5
P
PrintablesChili_nor
GPS mount, m1025-dq for iflight 25mm gps mounts
A GPS mount for the nazgul XL10 v6 (chimera 7) frame tpu, that fits a m1025-DQ GPS module from GEPRC allows routing of the connector through the casing, along with a opening for the barometer.
- Downloads
- 206
- Likes
- 3
- Rating
- 5
P
Printablessnillor200
Ruger 1022 magazine mount for SlatWall
SlatWall mount for Ruger 1022 magazines. Holds up to 5 original 10 shot or 25 shot extended magazines. Ledges designed into the corners to allow 10 shot magazines to safely sit without chance of falling through. 25 round magazines slip in…
- Downloads
- 198
- Likes
- 23
- Rating
- 0
P
PrintablesMe
1024:1 Gearbox
In this gearbox, turn the first gear 1024 times to make the last gear turn once. You will need to print 1 main body, 10 main gears, 1 last gear, 2 caps, and 1 spacer (you don't need the spacer but it helps reduce the friction between the…
- Downloads
- 189
- Likes
- 23
- Rating
- 0
P
Printablesskooby
Bosch Sortimo L-box 102 Insetboxen
Hier einige druckbare Insetboxen für die Modellreihe 102 Generation 4. Deckelstyropor muss vorhanden sein. MfG
- Downloads
- 187
- Likes
- 49
- Rating
- 0
P
PrintablesRiley Coma
Nazgul Eco GEP-M1025Q GPS Mount
GEP-M1025Q Gps mount for iFlight Nazgul Eco Might fit other gps units and quads Printed in 95a tpu 10% concentric infill. If to tight of a fit over size a couple percent or so.
- Downloads
- 186
- Likes
- 4
- Rating
- 0
P
PrintablesVal Xue
Fusée Tintin 102 cm
Fusée Tintin, 102 cm de haut, à assembler avec de la colle. Le modèle a été adapté de l'original pour être imprimé avec l'imprimante Kobra 3 MAX et Creality K1. Une fois les composants imprimés, il faut assembler les pièces blanches et…
- Downloads
- 186
- Likes
- 11
- Rating
- 0
P
PrintablesByzantine
Motorbike Peugeot 101 / 102
Peugeot 101 / 102 French motorbike engine Engine years: 1967 Ideal for understanding how the engine works and discovering the design of this iconic bike. This motorbike is often converted from internal combustion to electric drive Work in…
- Downloads
- 183
- Likes
- 12
- Rating
- 0
P
Printablesflip_lmb
Lego Star Wars UCS Red Five X-wing (10240) Wall Mount
This design allows you to wall mount your Lego Star Wars UCS Red Five X-Wing vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how dialed in your…
- Downloads
- 178
- Likes
- 43
- Rating
- 0
P
PrintablesThiagosgaguiar
Lego Technic - 6331026
Replacement LEGO Technic Part: 6331026 Are you missing the LEGO Technic part number 6331026 ? You're not alone! I encountered the same issue while building my LEGO Technic set, so I decided to design a 3D printable version of the missing…
- Downloads
- 177
- Likes
- 12
- Rating
- 0
P
PrintablesAdrián Parisi
MJX 10208 chassis dirt shield
Dust cover for MJX 10208.
- Downloads
- 172
- Likes
- 9
- Rating
- 0
P
PrintablesJlainton
Gridfinity ESP32 Holder (ESP-WROOM-32 Chip CP2102)
Looking at another ESP32 holder available here, I was thrilled, but then sad when it didnt fit my ESP32. So I made this up instead. My Model is a KeeYees ESP32 Devboard (ESP-WROOM-32 Chip CP2102) Fits like a glove, with a tad bit of room…
- Downloads
- 172
- Likes
- 17
- Rating
- 3.33
P
PrintablesJeff Hengesbach
Hydraulic Coupler Dust Covers - 1025R
Dust covers for Hydraulic Quick Connectors found on John Deere Subcompact tractors. The factory dangly style covers tend to get ripped off / lost. Fit ISO 5675 ¼" AG Quick Connectors 1025R 1023E, others(?) The Female Boot needs to be…
- Downloads
- 166
- Likes
- 15
- Rating
- 0
P
PrintablesSzwalkiewicz
Ruger 1022 mag to slatwall
Works with Ruger BX-25 and Butler Creek 25/22 mags but not the factory 10 shot(fits but tight) For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if…
- Downloads
- 162
- Likes
- 44
- Rating
- 5
P
PrintablesBastiaan van Weerd
ESP32-Devkit + PCM5102 Music box
See here how to create the soldering connections: http://www.winko-erades.nl/using-an-esp32-and-pcm5102-as-a-bluetooth-audio-receiver/ YAML Code for ESPHome: i2s_audio: i2s_lrclk_pin: GPIO15 i2s_bclk_pin: GPIO4 media_player: - platform:…
- Downloads
- 161
- Likes
- 25
- Rating
- 5
P
Printablesthall72
Lego Compatible (10202.dat) Tile 6 x 6 with Groove and Underside Studs
This model is compatible with the lego system.
- Downloads
- 154
- Likes
- 16
- Rating
- 0
P
PrintablesrandomStreetbegger
Logitech G102 Custom Shell 54gm mod (collected from ABA from youtube)
This is the model of Logitech G102 54gm mod video from the youtube channel ABA I collected it from sketchfab abazibiz ( https://sketchfab.com/3d-models/logitech-g102-custom-shell-4d0cdf9a50e0479691c1cf2b92e3a54a ) but its a single STL and…
- Downloads
- 151
- Likes
- 6
- Rating
- 0
P
PrintablesLilOozyFert
Lego Ferrari F40 10248 Wall Mount
Simple print for wall mounting your Lego. I've attached the f3d and step file in case you want to modify it for your usage.
- Downloads
- 151
- Likes
- 13
- Rating
- 4
P
PrintablesPeter
Ruger 1022 magazine mount with screw holes
Ledges designed into the corners to allow 10 shot magazines to safely sit without chance of falling through. 25 round magazines slip in from the top and are securely held. Added screw holes to the original
- Downloads
- 150
- Likes
- 18
- Rating
- 0
P
Printablesnightfox90
Champion Auto Trap Replacement Horseshoe SKU: AT1023BK
This is a replacement horseshoe for Champion brand auto trap machines. Part SKU AT1023BK. I made this part using Solidworks.
- Downloads
- 145
- Likes
- 3
- Rating
- 5
P
PrintablesNigeke
GRAVITRAX; Height stone 25 mm with 14 mm diam. hole and roll in (v.20220102.r00)
GRAVITRAX ; Though you would like to be able to build a column on top of where you drop the ball through the plate? You also can use this drop in half-way up the column. GRAVITRAX; Height stone 25 mm with 14 mm diam. hole and roll in…
- Downloads
- 144
- Likes
- 26
- Rating
- 5
P
PrintablesGeoff Williams
kd6102 case - "choppy"
This is a case for the "choppy" electronics kit available from jaycar: https://www.jaycar.com.au/5a-12vdc-pwm-motor-speed-controller-kit/p/KD6102 The instructions over at https://diyodemag.com/projects/choppy_the_pwm_maker mention some 3D…
- Downloads
- 144
- Likes
- 1
- Rating
- 0
P
Printablesdarkwomb
Makita Ni-MH 12v to Makita LI-ion BL1020B adapter
Makita 12v NI-MH adapter. For those who has old makita drill laying around and BL1020B battery. In short - you most likely know if you need it. There are 4 parts to print but you can get away with 2 as other 2 are just simple pins i…
- Downloads
- 143
- Likes
- 14
- Rating
- 0
P
PrintablesTobipooh
Lego X-Wing 10240 Wandhalter
Lego 10240 X-Wing Wandhalterung Die Halterung kann in Winkel und Ausrichtung frei gewählt werden um das Modell nach eigenen Vorstellungen zu präsentieren. Die beiden Teile werden einfach mit einer Schraube und Mutter zusammengeschraubt,…
- Downloads
- 141
- Likes
- 17
- Rating
- 0
P
PrintablesMarcin1415
Hinged 7 inch HDMI 1024x600 Display Case for Ratrig V-Core 3.1 Enclosure 300
My remix allows you to mount the display without interfering with the printer's structure. The display bottom cover has channels for cable clips. Same with 2 chamber plates. Additionally, there is an 8mm hole for passing the webcam cable…
- Downloads
- 140
- Likes
- 41
- Rating
- 0
P
Printableswedgeworks
Project Box for ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI, Relay Module and JST Connector
There are lots of project boxes out there. I needed a specific design that requires no screws. I hope you enjoy my little endeavor. It was a lot of fun to design and every time I design something I learn some new ideas on better design!…
- Downloads
- 136
- Likes
- 25
- Rating
- 0
P
PrintablesEvandro Assis
Switch TP-Link SG1024DE mount
This is a design allowing to mount TP-Link SG1024DE switch on a wall or table. It is designed in 3 different parts, one on the left and one on the right that are screwed onto the switch, the 3rd piece serves both sides and works as a…
- Downloads
- 135
- Likes
- 19
- Rating
- 5
P
PrintablesBoBaCool
Workshop hose vacuum adapter - 100mm (98 in to 102 out) - Raccord aspirateur atelier
Workshop hose vacuum adapter - 100mm (98 in to 102 out) I designed this conical model to easily connect several machines with slightly different diameters. Printed with Prusament PLA, 0,4 nozzle and 0,3 layer height. Raccord aspirateur…
- Downloads
- 135
- Likes
- 22
- Rating
- 0
P
PrintablesRaphhorn
Lego Porsch 911 (930 Turbo) Rims Lego 10295
i didn't like original lego rims so i designed some with a little inspiration from the internet i haven't copied them from any rim brand only the rear rims are tested yet Print Settings Rafts: No Supports: Yes Resolution: 0,2 Infill: 100…
- Downloads
- 133
- Likes
- 43
- Rating
- 5
P
PrintablesHamstio
HSW honeycomb holder for the ferm CTM1024 Dremel clone
A hsw mount for the FERM CTM1024 Dremel clone. print: PETG (Should also work in PLA) 0,20mm layer height
- Downloads
- 133
- Likes
- 20
- Rating
- 5
P
Printablesgyboti
Gearbox 1:2-1024
You need to print one big and 1-9 2-1 gears depending on your ratio After, you need to superglue the support rod at the end of the base
- Downloads
- 131
- Likes
- 15
- Rating
- 0
P
PrintablesMarco Lebdech
ML120 - 120mm Quad frame for brushed 1020 motors
I abandoned this model some time ago but I am leaving it here, if you want to continue. Fully enclosed 120mm FPV frame for brushed quadcopter. Designed for specific hardware, that will be used in my quad. Battery is mounted from bottom…
- Downloads
- 130
- Likes
- 6
- Rating
- 0
P
Printablesthall72
Lego Compatible (10227.dat) Minifig Headgear Head Cover Swamp Creature with Eye Holes Fins and Spikes
This model is compatible with the lego system.
- Downloads
- 126
- Likes
- 26
- Rating
- 0
P
Printablesinnercube
L-Boxx 102 Inset boxes A3 divider / organizer boxes Bosch Sortimo
I use the Sortimo L-Boxxes with the available insert boxes from Sortimo. To increase the amount of storage I created created this divider. I use double sided tape to secure them to the boxes. See also my other design for the slightly…
- Downloads
- 124
- Likes
- 28
- Rating
- 4
P
Printablestato_713
Samsung Galaxy A10e a102 case
Originally published here: Samsung Galaxy A10e a102 case by tato_713 - Thingiverse This cases are for the Samsung A10 e ; for the A10 see this post . Thanks to the user AustinS , who helped me testing this case. Some of the models are…
- Downloads
- 120
- Likes
- 11
- Rating
- 5
P
PrintablesBuildX
#0102 Click-n-Lock Stackable LR44 Battery Tray
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Have you ever wished you could store your coin cell batteries in a neat and…
- Downloads
- 120
- Likes
- 9
- Rating
- 0
P
PrintablesahmedAQ
Battery Cap for Mitutoyo ABSOLUTE Digimatic Indicator U1025e
I printed with SLA 3d printer for a good result. youtube video: https://youtu.be/F84rsRMOOS4
- Downloads
- 114
- Likes
- 5
- Rating
- 0
P
Printablesflip_lmb
Lego Star Wars UCS B-Wing (10227) Wall Mount
This design allows you to wall mount your Lego Star Wars UCS B-Wing vertically. Please note, in the pictures above I tried to make the ship side of the mount look a bit like Lego, but it looks terrible (as does the white filament). The…
- Downloads
- 113
- Likes
- 23
- Rating
- 0
P
Printablesdoragasu
Enclosures for CP2102/PL2303 USB to UART converters
Here are several designs for the USB to UART boards I had lying around. They are pretty quick to print using 0.2 layer, and can be closed with a bit of glue. There are also convenient slots to see the PCB pinout silk screen. Category:…
- Downloads
- 113
- Likes
- 4
- Rating
- 5
P
PrintablesChristian
Entriegelungswerkzeug Fahrpedal T10238
Entriegelungswerkzeug für Fahrpedal eines VW Golf VI, Baujahr 2012. Release tool for a accelerator pedal of a VW Golf VI, construction year 2012. accelerator pedal OEM: 1K1721503AN
- Downloads
- 110
- Likes
- 3
- Rating
- 0
P
PrintablesAnymars
Kleinteilemagazin Bosch L-Boxx 102
Kleinteilemagazin für die Bosch L-Boxx 102 mit Deckel. 2 Magazine übereinander ergeben genau die passende Höhe. PLA, ohne Unterstützung, 15% Füllung
- Downloads
- 110
- Likes
- 24
- Rating
- 5
P
PrintablesYstvan
![Sturdy Ferm rotary tool (Action, CTM1025) to router adapter [onshape]](https://media.printables.com/media/prints/941771/images/7194453_96293e27-fa68-4c28-85cb-1ae50b2cd4ad_3f4336f4-c334-4312-a162-0cd73be30ae3/img_20240713_085636.jpg)
Sturdy Ferm rotary tool (Action, CTM1025) to router adapter [onshape]
Why? I found a few designs to convert the Ferm rotary tool to a router. Unfortunately, they all turned out not very stable when I built them. I wanted something that would not move when I am using it, especially since there would be force…
- Downloads
- 110
- Likes
- 32
- Rating
- 0
P
PrintablesGinger
Ricoh GR III 3 Battery DB-110 1020 Pelican Case Insert
Hi all, I have made a Ricoh GRIII DB-110 Battery insert for the 1020 Pelican Case. It holds 2 batteries perfectly, while keeping the GRIII from moving around too much in the case. Once printed, it should be pressed into the rubber insert…
- Downloads
- 109
- Likes
- 9
- Rating
- 0
P
PrintablesSimon E
Holder for Ferm CTM1024 Dremel Clone on Küpper Euro Pegboard
A Holder for the Ferm CTM1024 Dremel Clone on Küpper Euro Pegboard Print in PETG with Supports enabled.
- Downloads
- 109
- Likes
- 9
- Rating
- 0
P
Printablesthesquirrelyengineer
1020 Aluminum T-Slot Rail End Cap
This is an end cap for 1020 series t-slot aluminum extrusion rail. The two pegs fit into the round holes in the end of the rail and the body of the end cap safely covers the end of the rail without extending over, so it is perfect for…
- Downloads
- 106
- Likes
- 10
- Rating
- 0
P
PrintablesMarcElbichon
Pencil holder for 96, 99 & 102 pencils
I took the source code of Customizable fancy pencil holder and remix it to make a big one for 96, 99 or 102 pencils Category: Art Tools
- Downloads
- 105
- Likes
- 18
- Rating
- 0
P
Printablesjakbuz
CP2102 case
PLA 0.2 mm layer height 20 % infill Place the PCB between the two parts so that the pins are covered and the board lies on top of the support pillars. Glue the two parts with super glue. If the board slides inside the two parts. Pull on…
- Downloads
- 104
- Likes
- 4
- Rating
- 0
P
PrintablesSplinterPrinter
Breadboard ESP-friendly for 2x 830 PINs (MB-102) with banana connector posts
For an electronics project with some kids i needed a platform to built with the ESP32. So I came up with this version: big enough to fit two MB-102 boards (63 pins long) If you place the ESP32-dev board in the middle, you have 3 pins left…
- Downloads
- 103
- Likes
- 13
- Rating
- 0
P
PrintablesAntonín Roll
Radiacode 102/101 selfie stick v2
RC102 and mobile phone holder. Necessary material: Selfie stick from Aliexpress - Ulanzi MT-58 120CM Mobile phone holder - any suitable Threaded rivet M5 - 2 pcs Screw with collar head M5 - 2 pcs Threaded reduction tripod thread 1/4" to…
- Downloads
- 102
- Likes
- 18
- Rating
- 5
P
PrintablesLordT3ch
USB-UART converter case (TTL CP2102)
Both parts should snap together. I printed mine on 0.2 mm layer height with 0.4 nozzle on Bambulab A1. No supports needed.
- Downloads
- 101
- Likes
- 3
- Rating
- 0
P
PrintablesJayS
Case for 7" Waveshare Resistive Touch Screen LCD, 1024×600
I designed this case for the 7" Waveshare touch screen for use in my Smarthome system. The following parts are required to complete the display: 1 pc. Touch Screen ( Link ) 1 pc. Rapsberry Pi (see above link for supported types) 8 pcs. M3…
- Downloads
- 97
- Likes
- 14
- Rating
- 0
P
PrintablesRichardS
M1025Q GPS - GEPRC Vapor Mount
casing socket adapted for geprc vapor O5/D5
- Downloads
- 94
- Likes
- 1
- Rating
- 5
P
PrintablesHetothet
Helldivers 2 Coaster 4inch/102mm
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
- Downloads
- 93
- Likes
- 21
- Rating
- 5
P
PrintablesDMR
L-BOXX 102 Transparent - Gridfinity Baseplate 9x7 & Custom Bins
Hey there, I recently bought an organizer L-BOXX 102 Transparent and wanted to Gridfinity it. Looking up and trying a few models I found soon led me to build my own. This version is a 9x7 grid, fits snugly to the box with just a bit of…
- Downloads
- 89
- Likes
- 10
- Rating
- 0
P
PrintablesBernhard Stampfer
Case for ESP32S3 + PCM5102
tight tolerances, make sure your printer is properly calibrated, 0.2mm layer height friction fit for ESP32S3 and PCM5102, box clips together both usb ports and 3.5mm audio jack exposed
- Downloads
- 88
- Likes
- 10
- Rating
- 5
P
Printablesthall72
Lego Compatible (u9102.dat) Figure Fabuland Torso
This model is compatible with the lego system.
- Downloads
- 86
- Likes
- 11
- Rating
- 0
P
PrintablesTheDIYGuy999
1/8 Scale Double Eagle E101 E102 Land Rover Defender Parts
James Bond 007 Spectre fenders are bolted on, using the original holes and screws. Printed in PETG with 10% infill and 0.16 layer height. Housing for 40mm speakers: Printed in PETG with 20% infill and 0.25 layer height. And many more STL…
- Downloads
- 84
- Likes
- 30
- Rating
- 0
P
Printablesinnercube
L-Boxx 102 Inset boxes B3 divider / organizer boxes Bosch Sortimo
I use the Sortimo L-Boxxes with the available insert boxes from Sortimo. But I have too many big B3 boxes. So, I created these dividers. I use double sided tape to secure them to the boxes. There is a version for dividing the B3 box in…
- Downloads
- 83
- Likes
- 24
- Rating
- 5
P
PrintablesMatthew Walsh
Pioneer / Toyota Audio Unit Knob 90010-22031 or 9001022031 or CXB8282
As there discontinued I was lucky enough to get my hands on the last one available. Toyota Part Number: 90010-22031 or 9001022031 | S/S 9001022030 or 90010-22030 Pioner Part Number: CXB8282 (HL15)
- Downloads
- 83
- Likes
- 2
- Rating
- 0
P
PrintablesWIESEMANN 1893
INLAY FOR RATCHET SPANNERS I TOOL TROLLEY INSERT I WM102
3D Model for Tool Trolley Insert for Ratchet Spanners Compatible for drawers Compatible connectors included Dimensions: L- 200mm, W - 200mm, H - 30mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF…
- Downloads
- 79
- Likes
- 30
- Rating
- 0
P
Printables4rny
LEGO X-Wing Wall Mount 10240
Inspired by the wall mount from muggy83 i designed this model to fit on a Prusa Mini.
- Downloads
- 78
- Likes
- 9
- Rating
- 0
P
PrintablesEstariolthesage
Printer tray for HP LaserJet P1102w
replacement printer tray for 2D paper printer model HP LaserJet P1102w. it can hold up to 50 sheets of paper size A4
- Downloads
- 77
- Likes
- 5
- Rating
- 0