Counting matching models…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Starfighter is very realistic Print in place kit card , Assembly required
Plate needed to adjust the gearbox linkage on a Volkswagen Golf II GTI 16V. Tool VW 3104
Fred 104's shoulder knifes, based on the version he uses in halo legends/infinite modeled these for my own armor build, but decided to publish this for everyone, so feel free to use this for your own spartan build! 21/08/2023 update…
The Canadair CF-104 Starfighter, a Canadian-built version of the Lockheed F-104 Starfighter jet interceptor, specifically modelled off of the CF-104D 2-seater training variant. Expect a non-training variant to be added soon, complete with…
About the F-104 Starfighter The F-104 is an American single-engine, supersonic interceptor which was extensively deployed as a fighter-bomber during the Cold War. Created as a day fighter by Lockheed as one of the " Century Series " of…
To assemble you'll need 8 (yes 8) m3x40 and the same number of m3 nuts or nylocs. The insert is separate so you could print in a different filament (e.g. TPU) if you want. The plan is to put some foam or another rubber insert in the top…
Nov. 08, 2024 V1 Build 104: First release Prologue: NASA has launched the Artemis missions and plans to land on the moon again during the Artemis III Mission, hopefully in 2026. They have challenged the industry to develop and build a new…
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [Update Nov 11, 2024]: I just created a hard case to store all these figures.…
Chain ring guard for MBT/ATB cranks (Shimano/Sram etc) having 104BCD (bolt circle diameter). Mainly intended to protect your trousers getting dirty from the chain. Suitable for 32 to 34T chainrings. Works wel when converting from 2 or 3…
Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.
Divided into parts for large scale - every part fits on MK3/MK4 printbeds. Use superglue to glue the parts together - overall length: 104cm (unscaled) Printed with PETG with a 0,4 nozzle. The Lockheed F-104 Starfighter was a supersonic…
Update: Pre-cut vinyl stickers for the tires availble! https://www.thingiverse.com/make:1095612 In addition of Boyson-IPL's OpenRC F1 2022 remix, I designed Tamiya F104 compatible rims that look like the 18 inch wheel aero covers from the…
For use on grass and gravel. Might not work so well on asphalt. The bigger diameter (~90mm) is useful in taller grass. If you prefer the underside of the printed part to be on the outside/inside (maybe because you use a textured…
I loved my old aiwa Minidisc Player and I wanted to keep it functional. The original LIB-902 LiIon battery had leaked and was dead anyway. So I discovered that already some adapter from the 10440 cells are available. But I wanted them to…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
OpenRC F1 - 2017 style wheels that fit Tamiya F104 tires. Package also includes the outer thrust plate that is compatible with the Ball Diff found at ( https://www.thingiverse.com/thing:3085455 ) In the spirit of OpenRC, STEP files are…
This is an upgrade from my old caliper case design. It works and it prints in one piece if you own an MK3 All you need is : 2 neodymium magnets 3x8mm 2 screws for the hinges (I used 2 headless allen screws) I've done some modifications on…
For use on porbably every terrain. I still have to test them myself. If you prefer the underside of the printed part to be on the outside/inside of the TPU parts (maybe because you use a textured printbed), feel free to mirror the…
F-104 Starfighter A slim supersonic interceptor with many names from the Century series of fighters. The C-model was fitted with air-to-ground armament. Its thrusters and small, thin, trapezoidal wings allow it to fly at great speeds,…
M104 trailer The M104 trailers are based on the Μ102 trailers. The M104 and M104A1 trailers were constructed from welded steel plates, cross-members and wheel wells. Uniquely, the M104 had a tailgate in front as well as at the rear. The…
Print with PET-G horizontally Nozzle: 0.25 Layer height: 0.08 mm Supports: yes
Although this is designed for a Epson PowerLite Home Cinema 1040, you can redesign the bracket that attaches to the bottom of the projector to align with mounting holes on other models. This is a remix so that the projector is free…
A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…
This model is compatible with the lego system.
I will print it soon, by the way it needs : 2 M3 worm bolts around 1cm 2 neodymium magnets 8mm diameter with 3mm thickness. The new version is better because it prints in two parts without supports and doesn't need any glueing like the…
Print with the out side face of the wheel down with support for the outer tire lip and center face only. Wheel face grove doesn't need support. 15% infill is plenty with 3 or 2 wall loops.
For use on sand (beaches). Might not work so well on other terrain. The bigger diameter (~90mm) gives more room for speed and should work better with bumps. The hexagonal hole is a tight fit depending on your printer tuning. Front wheel…
For the 3mm version you will need 8 M3x12 and the 5mm 8 M3x14. The top front brace was two versions, with built in standoffs and without (will need to print 2 standoffs and brace). Another option is to use the "cut" version, which removes…
These brackets are specifically designed for some spare 17mm thick wood planks I had that were cut to 104mm depth. I also added 2mm chamfers on all edges but the back 4. The mounting keyholes work well with ‘Walldriller’ drywall screws…
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
I use the JSAUX modcase on my Steam Deck daily but one issue I immediately identified was the lack of protection against foreign objects damaging the charge port and/or accidentally turning on the unit in my backpack. There are three…
The OWON benchtop meters XDM1041 and XDM1241 are both nice units for benchtop work but could use some gridfinity lovin' so here we are. This model should fit the meter tightly such that it won't just lift out of place. To insert, start…
part I used is: -3M bumper rubber feet -Pomona 2854-0 and -2 Banana Jack Connector -RD6012P (I haven't tested if other RD model fits) -One M2.5 countersunk screw I also made a single part variant
This simple design fits into the lid of a Peli 1040, safely holding an Analogue Pocket in place. Without something like this, the Analogue Pocket still fits neatly into the bottom of the case, but falls into the lid if you tip it upside…
A 6x2 Gridfinity box for the Mitutoyo MIT530-104 Vernier Caliper.
A wall mount that uses two #10 wood screws to mount the Lego Galaxy Explorer Lego set on any wall that can fit it.
Recently, I installed some graphics AI on my computer, and I like the side blowing cooling method, so I made a fan adapter that looks good to cool my graphics card This model is applicable to the fan model 752512Turbofan
T4 prop guard for 1045 and large props upto 10.5 inch Category: R/C Vehicles
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
Print in PETG using lots of walls and strong infill patterns. Then do a stress test trying to break the mount. If it doesn't budge, carefully use it on a bike.
I printed it out of TPU. Using 1in x 1in low density foam strip on the top lid to hold Pocket in place. Triangle infill seems to work well. 6 top layers will keep the infill from showing through. V7 adjusted pin location for printing with…
KCD1-104 Rocker Switch Box Custom enclosure designed for the KCD1-104 rocker switch . The box includes a precisely sized rectangular cutout ( 12.8 mm × 19.5 mm ) for a perfect press-fit installation. Intended for prototyping and…
10 inch Rack Mount for QNAP Switch Model QSW-2104-2S and QSW-1105-5T. It's a snug fit, so you have to press it in. Serverrack in the Photo is Skeleten 10" Rack, can highly recommend it's build like a brick.…
I haven't tested this yet but I'll be doing the 20K km service on my Street Triple soon and need this tool. Let me know if there are any issues with it. Designed for a 22mm socket. You'll need to consult your service manual for the torque…
Original plastic control knobs on my electric stove top started to crack at the stem where it attaches to the metal shaft. Replacement knobs are expensive - too expensive! I designed a replacement stem (all you need is to pull the metal…
This model is compatible with the lego system.
A model of the famous F-104 Starfighter I reccomend using supports
The OWON XDM1241, being a budget bench multimeter, is quite a neat little unit for the hobbyist. Its small form factor certainly is a plus if you don't have a lot of bench space available. The downside of it being such a compact and light…
My wife asked me if I could make her a pot 104 mm in diameter and 105 mm in height with a screw cap
got a Rollo X1040 4x6 thermal label printer but wanted a holder for the labels and some other quality of life upgrades I made the post-it note holder area more of a dispenser added TPU feet for below so it doesn't slide around added…
Wedge for fixature and lower the vibrations on VW Passat B5 headlights. Rebuild for VW's 3B0941042 which isn't produced anymore
Multiboard mount for the DCB1104 DeWalt charger.
In order to fit the IKEA plant I resized the pot and also removed the vase mode and turned it into a regular print. It now perfectly fit the IKEA plant item number 104.611.47.
Lockheed F-104G Starfighter Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Tolerances are tight enough to work with TPU or PLA.
I needed an enclosure for two of these KCD1-104 switches that I could mount. Super simple design that snaps together.
Designed for Trek Blendr system with duo mount adapter, leaving the second one for any light or cam. You need a standard Garmin (round) mount with the 2 bolts used on garmin stuff. Designed and tested with Garmin Edge 1040. Thanks for…
This model is compatible with the lego system.
Slight edit to the rear edges of the chassis to add clearance for the Tamiya f104 tires, which rub on the stock chassis. This is the rear for the 2017 version chassis.
Model of the housing for the OWON XDM1041 Digitial Multimeter and DGE2070 Arbitrary Waveform Generator. Useful for mocking up attachments or modifications for your devices. Files included: .stl, .step, .obj, .skp
I recently purchased the OWON DGE2070 Arbitrary Waveform Generator and the OWON XDM1041 Digital Multimeter. I wasn't sure where I was going to put them as my workbench is very small. After moving a few things around, I decided that, if I…
Approximation of a Keystone 1043 18650 holder. WIP, I am still waiting on delivery of battery clips to work out the mounting for those. This will fit on the CherryPhillips iSpindel PCB. F360 design : https://a360.co/2HiALXT clips :…
This 104th Battalion stencil is designed for spray painting, airbrushing, or hand-painting , making it perfect for customizing helmets, armor, props, and more . The clean, precise design ensures crisp lines for Clone Trooper enthusiasts…
My set of useful gadgets for the Makita LS1040 miter saws. Preffered filament ABS (for duarbility). ls1040n_dustport.stl - angle adapter for 35mm Makita hose. 1040_clamp+30.stl - 30mm extension for vertical clamp 1040_clamp+50.stl - 50mm…
Modified the mount from Thingiverse so it can be attached to a Skadis board using the T-Clip system by @LineArcLine (using the negative hole by capze ). It is designed to you use a right angle power cable (see picture). You will need to…
This part replaces the original slide valve wich is prone to breaking. Instead of buying the whole thing, you can get going with this. Please mind the instructions at the print settings section! Print Settings Printer Brand: Creality…
Original design by FSXPilot14 on Thingiverse. https://www.thingiverse.com/thing:5414118 Full credit to FSXPilot14 for designing the reinforced rotors. Key changes I made to FSXPilot14's design: Fin is much closer to tire (represents scale…
UPDATE 09.01.2023 Modified it that AP fits with GBA Cartridges.
larger battery holder for WL Toys 104001
I created this Quadcopter as something to take the brilliant emax 1104 micro power bundle. It's built to take the 1104 motors, ESC's etc along with the FEMTO F3 flight Controller.…
Astatic D_104 Microphone 20% infill PLA 73 V/r, Jason KBØEOD
The F-104 star fighter was the first ever fighter to cross speeds upto MACH2 the plane can be printed in whole as one peice and in parts . there are some extra blocks in air ,so plz while printing delete them they are useless
Description A simple, reliable snap-fit lid designed for the Husky brand small parts bins that comes with many of their organizer cases. This version fits the “full-width standard bin” — exterior dimensions at top of bin are roughly 84 mm…
About model Optimised and prolonged inner handle for Mitsubishi Delica's sliding doors. Made for a friend's offroadsafari.cz orange Delica. ASSEMBLY ! You need to put your original steel nut into plastic insert first, rounded side in.…
The exterior of the helmet is just an enlarged version of the model taken from Mecabricks. If someone knows how to do it properly in Fusion 360, that would be great. The Tire is designed to be printed in TPU For the colors, refer to the…
2 story dvr case for the dahua XVR5104HS-I2. i used: 6 m2x4 inserts 6 m2x6 screws
Make sure and share your makes and if you like it please give it a ❤ LIKE! I was asked to use e-ink displays from Waveshare to create reusable and customizable name badges. So I did. These are simple to print. Print them face down with…
TB10104 is a storage box designed for the Tessera modular storage system. Assembly requires no screws — glue is only needed to attach the optional label plate. External dimensions: 100x100x40mm Quick overview of the Tessera System:…
The deck goes in my backpack daily. Most everything else that travels in the backpack gets lint and dust in the cracks and openings. I didn't want that to happen to my deck so i made these covers. **** WARNING: Not removing/opening the…
This should be paired with my base: https://www.printables.com/model/1320259-analogue-pocket-pelican-1040-adapter Print two straps and they should friction fit in the lid. You can use double sided tape to make them extra secure.
this mount adapt 1104 motor for 3 holes prop Category: R/C Vehicles
Seitz Window Blind Flyscreen Retaining Clip SP1044 Caravan. Fix your caravan or motorhome blinds quickly and affordably! This 3D printed clip replaces the often-broken Seitz/Dometic part (SP104409/SP1044) and restores smooth blind…
I wanted to protect my equipment from bumps in transit, or dust while not in use. I designed this to print in one pass on the bed of a Bambu Labs X1/P1, and that mean many others as well. Choose which side the device model labeling is on:…
O'scope came with 4 color bands, none of which matched the dark-blue of channel 4.
recommend slower print speed and higher quality setting
I tested it in real life and it works very well, I recommend you use layers that aren't too big and you should use 100% infill. I tried it with PLA but other materials will probably work too.
I found that for tall, heated chamber prints, the part can be affected by the chamber heater cycling on and off… I remixed the add on HEPA filter snap on covers a simple rectangular shield that directs heat up and down instead of at the…
While the Original required a cardboard core this remix is made to work without a Cardboard core. I also optimised the model in terms of vertix count and material used. The inner diameter of the adapter is supposed to be ~82mm while the…
Simple print, these two brackets give the scope a slight downwards angle so that it can be mounted higher up (I have mine over my monitor). The scope clicks into these brackets and is very firmly held in place. Let me know if you like…
Printable 3D model. Cubone tissue dispenser. Pokemon inspiration. STL file.
Got a couple projects in the works for my intellijel palette case – this was the first. Dimensions are the same as the metal side-panels.
I did an scan of the original part and sketch the scan into a 3D model 6mm thickness to make the tool stronger. In thoery it shoud work in real life Edit. I change the 12.6 diameter to 12mm and reduced the 26.6 to 26 mm.
Flexible front bumper for the WLToys 104001 / 104002. Works with default chassis and with the 2mm carbon fibre chassis with my wedge. Print in TPU, model is already in best position, usually no raft and supports needed. Or use tree…
I had the problem that those ecotank inkbottles were always tipped over in the drawer. So I decided to create a holder so nothing will be spilled over ever
This is a Industrial control rack for controlling stepper motors. The main rack mount takes M6 heat set inserts, the PC104 takes M3 inserts, the TB6600 rack takes M4 inserts.
Model of the rubber foot that I made to use while creating my stacking bracket for my meters. I only have PLA filament and never used TPU before. Not sure how well the dimension work for TPU, but with PLA it is a very solid fit.
Zundapp Part 537-13.107. Bottom half of the KS80 cockpit
![Display Stand for LEGO City Passenger Airplane 60367 / 60262 / 60104 / 60022 [last update 7.10.2023]](https://media.printables.com/media/prints/606587/images/4822115_a6e78fc1-c2a2-4011-bdf4-8805c8ccdeb6_e156ec04-83f1-4f46-b5e5-fd288b717e49/60367-5.jpg)
