Counting matching models…
Good News everyone! Now there is a version that is compatible with the 13thGen (2023) Fire HD 10 tablet. Not only that but now there is a new feature/option for physical buttons on the side of the mount for the power and volume…
Warhammer 40,000 11th Edition Terrain Area Footprints This collection contains printable terrain area footprints specifically designed for use with Warhammer 40,000 11th Edition. The set follows the official terrain footprint sizes used…
DISCLAIMER: The original parts weren't made by me, I downloaded them from thingiverse. Unfortunately, the original post was deleted so I don't know who to credit. I did remix most of them for added accuracy. Knurled ring pattern by…
Cockpit Kit: Freewing Models R/C 90mm EDF F-18c Hornet This is a 1/11th scale cockpit kit designed for the 90mm EDF Freewing F-18C Hornet Fighter Jet. Included are the STL Files, a printed parts list, detail photos for painting, assembly…
Simple low profile stand for the 11th generation (2021) Kindle Paperwhite. Might work with earlier models, but YMMV. STLs are provided that hold the device at 60°, 65°, 70°, 75°, and 80°. Original design file is parametric as well for…
Shapes adapted from GW's released Terrain Area Footprints PDF, which although they don't precisely match the dimensions they have specified should match any paper print and likely their own released templates. Infilled with hexagons to…
I made the 3D model from scratch but got the idea from Kindle paperwhite 4 grip. PLA. Took about an hour to make. Fits the kindle paperwhite 11th generation. 74.2 x 124.6 x 8.1 mm Slight issues with model that do not effect the print or…
Warhammer 40,000 11th Edition – Matched Play Terrain Set Dear Wargamers, Thank you for downloading this terrain set, designed specifically for Warhammer 40,000 11th Edition – Matched Play . This project was created as our contribution to…
Warning This case is intended for use with the Kindle Paperwhite 11th Gen (2021 edition). It might work with other Kindle models, but there are a lot of variants out there with small but significant differences. If you decide to print…
Simple Xiaomi mi 11T Case. To be printed in TPU or similar. In the pictures, one printed in Red Tenaflex of Winkle filaments, and with no top nor botton layers to show the triangle infill. The grey version, printed in TPU, with hexagon…
Please comment, rate, and post a make! Update 12/14/2023: Resized parts to fit on smaller beds. This is a remix of the best Fire HD tablet mount. Changes: Fully constrained and named sketches (can be resized without other parts getting…
I printed it from PLA, and it is a tight fit, but it works. I'm also planning on printing it in ABS too, because it is less rigid. TPU would be the best, but I don't have that for now. I recommend drastically reducing printing speed…
my take on grip for 11th gen paperwhite.
This is a remix of the smaller piece with a cutout for a regular USB-C cable. For all the other files, head over to https://www.printables.com/model/383856-wall-mount-for-fire-tablet-hd-10-11th-gen-2021
hard case for 11t pro
This wall mount is for the FireHD 10 2021 11th generation. For exact dimensions and fitting check the wiki page. It is based on the ideas of fiendie: https://www.thingiverse.com/thing:1874776 As he couldn't supply the original file not…
Wall mount for the Amazon Fire HD 10 (11th generation / 2021 model) based on https://www.thingiverse.com/thing:4734399 , with the following modifications: The side walls have been made thicker and a cavity has been added on the right-hand…
No problem with printing speed 50-80 mm/s, possible to print much faster close to 100/140 mm/s with little quality degradation. 3mf file for Orca Slicer Printer: Bambulab X1 Layer height: 0.2 mm No support, no brim Temp: 220/20 C Bambulab…
I made some changes to the original design: - complete change of the handle mounting, less plastic, better access between tablet and wall/electrical box - holes for buttons (clean the holes, buttons need to be pushed GENTLY FROM THE…
This is an STL for a Kindle Paperwhite (11th Generation model M2L3EK), I designed to use as a digital mold to make a case.
I made this so you can hide your ktuner and so that you can keep a better view of the road by relocating it from the windshield. I also just think it looks really nice. I recommend using ASA to print and giving it plenty of walls. I have…
A set of interlocking terrain template 2 mm thick and 10 mm wide frames for the 11th edition. Compatible with the A1 Mini's buildplate (180×180 mm). Print with a brim or at least some brim ears added. Rectangles: 11.5"×7" 6"×4" 10"×2.5"…
The Paperwhite is very light weight but very hard to hold. These grab bars solve the problem. I liked these 2 designs, but they didn't work for me. They inspired me to create a new model.…
Deutsch: Für mein Kindle Paperwhite der 11.Generation habe ich erneut ein Case entworfen, das das Kindle nicht nur schützt, sondern dieses auch günstig, schnell und einfach mit einer kabellosen Ladefunktion ausstattet. Im Vergleich zu…
Custom 3D-printed case designed for the Kindle Paperwhite 11th Gen. This sleek and functional case offers a snug fit to protect your Kindle from scratches and wear. Printed with a 0.20mm layer height for smooth details and durability.…
This protective case for a kindle ebook reader (11th generation) comes with a slim footprint. I designed it in a way that the hinges can easily be printed separately. The case is assembled by snapping on the hinges to the top and bottom…
you need to print 4x Large rectangles: 7” x 11.5” 2x Large right triangles: 8” x 11.5” 4x Medium rectangles: 6” x 4” 2x Long lines: 10” x 2.5” 4x Short lines: 6” x 2”
The best cases for the Kindle were for the Kindle Paperwhite 11th Gen (2021), but I have a Kindle 10th Gen (2019). So I printed a case adapter for it! Started with the f3d files from the Kindle Love Handles , and made lots of changes to…
I have most of the spools with 44 and 48mm internal width which aren't winding well on default reciprocating gear set of the bambulab filament spool winder. These are 11T (48mm width) and 10T (44mm width) rack gears. They are sensitive to…
I had some issues with my kindle, not being able to hold it correctly without accidentally pressing the touch screen. I tried a couple of the available designs, but i decided to design something that combined a slim case with some grip…
I use this mount on my RC planes that need an extremely light weight fpv solution. I use the AKK A11T FPV camera for this, but attaching them to my planes was always pretty janky before I came up with this mount. I used PETG at 0.10 layer…
Ritual Wine Vessel, 12th-11th century BCE Unknown Artist China. Fixes: Subdivision, Selective smoothing, Boolean cut interior, and Boolean cut bottom Flat (Blender). Solidified and thickened and further repair in Meshmixer. If you would…
Remixed the large part to be used with Arlington DVFR1W-1 Recessed Electrical/Outlet Mounting Box, Single Gang https://www.amazon.ca/dp/B002W6ZOR4?psc=1&ref=ppx_yo2ov_dt_b_product_details note: this is a remix of the “large printer”…
A top-loading slim profile wall mount for a Amazon Fire HD 10 tablet so it can be used as a home automation dashboard. Printed using the settings of the original author on an Ender 3 V2 using 128g of Sunlu Black PLA. A USB cable can be…
Remix from: https://www.printables.com/de/model/425667-wall-mount-for-fire-tablet-hd-10-11th-gen-2021-cab For: The this Modell “ Medium Printer - Two Parts ”…
This foldable ruler is designed to quickly be able to measure the most common distances you run into when playing Warhammer 40K 11th Edition with just one tool. 2" - Engagement range / unit coherency 3" - pile-in / consolidate 5" -…
Remixed from Jakub Genza's model to fit the Paperwhite 11th gen. If you also want to use the lid from the original model, you'll need to extend the length to accomodate the lip. However, I find that it holds perfectly fine without the lid…
Remixed this thicker with buttons and usb run
Late Viking Warrior, 10th–11th Century
Unofficial terrain footprint templates compatible with the Warhammer 40,000 11th Edition terrain rules. This project provides printable STL templates for the terrain area footprints specified in the official Warhammer 40,000 terrain…
These pieces, together with the "Small Factory Ruins" and pipes from "Pipes and Generators" linked above, gives a complete set to use with the event companion for 40k 11th ed. I have made very slight modifications, and the files are…
Cog Tokens – WH40k 11th Edition Battlefield Status Set Double-sided gear-shaped status tokens for WH40k 11th Edition. Covers all key unit states including the new Hidden mechanic. --- About I created a set of double-sided tokens to track…
Statuette of a lion, 11th-12th C CE, now in the collection of the Minneapolis Institute of Art.
NOTE: I did not create this model. It is from Shadow of the Colossus. (PS2)
I used a Gridfinity Creator 5x3x2u Solid Bin as a base to create this Kindle bin. The kindle is pretty much exactly as wide as 3 units, so there is very little room left for walls. In my print they are just one wall and it can be a bit…
Grab Bars for your Kindle Fire tablet. Finally, with this large tablet case, you can hold onto your tablet. You can hold it with your left hand or right hand or both hands. You can hold it portrait mode or landscape mode. If you have had…
Took a 3D model of one version of the 11th Sonic Screwdriver and slowly massaged it into a Gridfinity tray.
Kindle paperwhite 11th gen case, sample printed in Bambu purple PLA matte at 0.08mm layer height on an A1 mini. I have printed a few device cases in PLA matte and they tend to look great, but are a bit brittle. I recommend bumping the…
Holder for S10/Xiaomi 11T in Samsung original case for the cassette deck of a BMW E39, E46, E38.... S10 v7 has a bit more thickness in the tape deck. To prevent case from scratching, on left and right is some felt-cushion glued in...…
Based on the 8th Gen case design, resized to cover the screen instead, to avoid damage during transportation.
A holder for a magsafe charging puck intended for the 11th Generation Honda Civic (Models without built-in chargers) The charger must be a post 2020 model (Since the diameters differ), The hole for the camera bump was made with the Iphone…
This is a model to test dimensions, I intend to mill this out of steel for use with a bike shifter on a crazy cart
Idler gear for Marui CJ7 Golden Eagle / Toyota Landcruiser 28t/11t Category: R/C Vehicles
This is for a MagSafe charger that goes over the existing wireless charger in a FL5 (Civic Type R 11th gen). The piece just sits over the top of the existing wireless charger. Remember to turn off the existing wireless charger by holding…
No modifications are required on the telescope. It adds minimal focus distance so it's possible to focus to infinity with most eyepieces. BOM 2 M3x5x4 heat set inserts 2 M3x10 socket head screws Instructions Print without support with…
This is an adapter platform for mounting ESR's Magnetic MagSafe Car Phone mounts to 11th Gen Honda Civics + 6th Gen CR-V's. These new generation Honda interiors don't have a decent mounting point for where I wanted my personal and work…
These are meant to be replacement parts for the GLoA E-Reader cases we are selling on 16 Bit Store. If you'd like to buy a pre-made case we are selling them at http://16bitstore.com If you wish to make your own case, you'll need to design…
I bought a second hand NUC 11 (NUC11TNKi5) on ebay but it was missing the bottom plate so I got a great deal. A bit of measuring and a 1hr print later and it looks as good as new! I added some little rubber feet to ensure the bottom gets…
After the new 40k terrain guidelines, I have cut some of my old terrain so dimensions fit better. You will need some of the models referred in my "extras" model for statues and pillars to make the dense bits in the terrain strips.
This is a cookie cutter with the number 11 for Birthdays. I made one for someone who turns 11 years old.
This is a footprint that you can edit yourself to fit what you want. I posted pictures of what I did with my stuff. I printed mine in prusament PCCF. I do use an extrusion multiplier of 0.936 for PCCF just in case that makes a difference.
Celebrating the 10th Doctor, Matt Smith, includes magnet version (20mmx3mm) Category: 2D Art
For this recommend using brim for case side, requires supports. printed in PETG, Tablet fits a little tight so some sanding maybe required to make removal of tablet easier.
This part is intended to be used in 11th gen Civics with the 2.0L K20C2 engine to improve induction noise with the stock airbox. I recommend printing this part with a high Tg material like ABS. Proper installation of this part can be seen…
Inspired by a model made by @Denitz which I've used for some time until it wore out. The original had an issue that the device would slide out if tilted, which was annoying at times. My model was designed with two small inner latches…
I printed it from 98A TPU, but PETG and ABS should work as well. PLA probably would be too rigid.
This is a cover of DEC transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley. Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear…
Printed with optimal preset on Bambu X1C with Elegoo PLA+
easily press bearings out of aluminum and plastic derailleur pulley/jockey wheels. can be used in a vice, drill press, arbor press, clamp, or you could just smack it with something. made for pressing 9 mm ID x 17 mm OD bearings 11t 13t 15t
The stand is made to fit in the tray of a BenQ XL2411T monitor, But works just fine on its own. Designed to be able to place and remove the controllers without any force. The pictured version is printed with 0.2mm Layer Height. Check out…
This is a cover of RA transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley. Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear…
The 11th doctor's Sonic screwdriver redesigned to hold Sonic Device(SD) cards. Category: Props
My kindle has around 14mm thickness cased, this model has 14.5mm to have some extra room
Crusader-Era Ceramic Hand Grenade (11th–12th Century Jerusalem) During archaeological excavations in Jerusalem's Armenian Garden, researchers recovered sherds of medieval spheroconical ceramic vessels dating from the 11th to 12th…
Finding a silica gel box for the Honda ZRV (EU), HRV(US) 11th gen Civic that fit in the little tray area under the centre bridge seemed to be hard, so I took messurements of my one and decided to make a box for myself! there are 4 corner…
There are many adapters on the market for using 14th gen or new bezels on servers. The storage solutions from the same era uses different mounting points for the bezels, so those adapters will not work. These will allow a 14th gen bezel…
This opening and closing aid was designed for the official Amazon cover for the Kindle Paperwhite 11th Generation. It is intended to make independent use of the Kindle easier, especially for people with limited hand or finger mobility.…
ECHO CS-2511TES Throttle Lockout Lever I designed this replacement throttle lockout lever for the ECHO CS-2511TES chainsaw , using the original factory component as a reference. The model was recreated to match the original part's shape,…
This is a model to test dimensions, I intend to mill this out of steel for use with a bike shifter on a crazy cart
This is for a MagSafe charger that goes over the existing wireless charger in a FL5 (Civic Type R 11th gen). The piece just sits over the top of the existing wireless charger. Remember to turn off the existing wireless charger by holding…
Finding a silica gel box for the Honda ZRV (EU), HRV(US) 11th gen Civic that fit in the little tray area under the centre bridge seemed to be hard, so I took messurements of my one and decided to make a box for myself! there are 4 corner…
Kindle Basic (11th Generation) - 2022 Release Protective Case This model is a case that you can put your kindle in before throwing in a bag or pocket. It can't be used while in the case, but it will keep it protected during transport. I…
After the success of 14th's Sonic, I bring to you 11th's Sonic! You can now recreate all the iconic scenes from the entire Smith era and the early Capaldi era! Featuring genuine flicking action! This model requires tight tolerances to…
I wasn't totally happy with the way the first iteration came out, so here is an alternative version if you prefer this one. An alternative caricature of Matt Smith as The Doctor.
Keyguard for TD Snap PODD 15 on 11th gen 2025 iPad
AAC Keyguard files for 1st through 11th Generation Ipads This listing will include all the keyguards I have designed for regular iPads if you are looking for iPad mini, Air, Pro, Pro 12.9 please look at my profile for other listings. Most…
A set of interlocking terrain template 2 mm thick and 10 mm wide frames for the 11th edition. Compatible with the A1 Mini's buildplate (180×180 mm). Print with a brim or at least some brim ears added. Rectangles: 11.5"×7" 6"×4" 10"×2.5"…
replaced headunit in my 2014 corolla that came with 2 additional usb ports. Designed this to hold them in place
Logo for 11ty static site generator . I printed to mount on my laptop (scaled 50% model size). The two parts are: The 11ty logo with bevel around the corners. A shallow base to give contrast between the frame and letters. I printed the…
