Counting matching models…
Stackable Gridfinity battery bins. A 1x1x5 bin that fits 9 batteries laying down, this bin is directly stackable. A 1x1x3 bin that fits 8 batteries standing up, in order to be stacked it requires a 1x1x3 spacer A 1x1x3 spacer. NOTE: The…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Print-in-Place Hinged Box for 4x CR123A Batteries Compact, one-handed operation storage box for 4 CR123A batteries (or CR123 or RCR123A or 16340) with an integrated hinge. Optimized for one handed use. Materials needed: 2 x magnets (size…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
So I printed a battery holder for CR123A batteries from Id10tapproved and sized this box from Luca Koch to fit that holder. Since I don't have a program other than Prusaslicer this means the holes are too big for a piece of filament to…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Adapter to use the easier to find CR123A batteries in place of a CRP2 battery. Printed in PLA on a Prusa Mini with .2mm layer height and 20% infill. Bend a paperclip as shown to make a connection. Tested to work in my older Nikon N6006…
CR123 - CR123a Battery Storage Box [AAA version here: https://www.printables.com/model/903130-improved-aaa-battery-rugged-box ] [AA version here: https://www.printables.com/model/903125-improved-aa-battery-rugged-box ] Liked the design…
Holds two CR123A batteries and clips into Magpul MOE pistol grips. Use TPU with 100% infill for the plug. I tried Overture TPU 95A and NinjaFlex 85A. I printed the main core in Overture Easy Nylon and PolyMaker PolyMax PLA. Both worked…
Snap-fit lidded case for 4 CR123A batteries with capacity indicators.
This should protect the batteries from the elements. It didn't take on any water when I ran them under water for 1 min and I could even submerge them in the sink. I would add an O-ring if you want them to be completely waterproof however.…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION !!! Hello Everyone I have designed battery holders for CR123A / RCR123A / 16340 batteries using ready-made contact plates, which can be purchased…
CR123A batteries are cheaper and easier to find than CR-P2 or 223A batteries, so this adapter connects the CR123As into a unit that is compatible with CR-P2 devices such as cameras. It requires a paper clip bent in a specific way to…
This is a dummy battery for CR123A very usefull when you need to connect an external power sorce. On one side you have a M3x10 on the other M4x10.
A simple battery holder for CR123A batteries. This model uses two Keystone 204 contacts. Press the battery contacts into place. They should fit snugly without the need for glue.
Battery Caddy that holds 6 CR123A batteries. Original model created by @Fatman_289047 I just resized it for the CR123A
Case for CR123A or equivalent 16340 rechargeable batteries. Internal dimensions: 34 mm (+0.6 mm for battery pin) x 17.2 mm (diameter). Please note that some 16340 rechargeable batteries may not fit, particularly those with a USB-C port.…
ENG A very useful CR123A/CR123 Battery Holder If you like it and you want to support my work, please donate here: https://paypal.me/StefanoUnga ITA Un contenitore di batterie CR123A / CR123, molto utile per riporle in maniera accurata e…
You can buy these from me here! If you like our models, consider giving us a 1 time donation! I print these using a 0.6mm nozzle with 0.2mm layer height using PETG They are very durable!
A holder for 5x CR123A 3V batteries that fits in a standard size Altoid tin.
Will hold two CR123a or a single 18650
Xiaomi Mi Temperatur Sensor LYWSD03MMC-z Batterie Mod von CR2032 auf CR123A und Magnet-Halter (Optional) Ich habe den Mi-Sensor von Bluetooth auf Zigbee geflasht um das Teil problemlos in mein Smarthome zu Integrieren. Da nach dem Flashen…
Bateriju maciņš priekš CR123A. Izgatavots no ABS vai ASA un blīves no TPU.
Battery holder for CR123a using these contacts: https://www.amazon.com/dp/B0B1ZJ8PNH
The ridges make it easier to grip when wearing gloves.
This adapter allows you to use your CR2 Batteries in device where A CR123a Battery is needed. all you need is a M4x6mm screw
Import the lid and text into slicer. Center to build plate, and select which filament to use for each. Now you can easily see what batteries are in the case.
CR123A battery box that holds 8 batteries Based on a previous model I made for AA batteries; https://www.prusaprinters.org/prints/119803-simple-aa-battery-box-that-holds-8-batteries. Modified from AA design to fit purpose of holding Arlo…
Note : 123A, CR123A, and LM123A all refer to the same battery. A simple holder for a CR123A battery. In addition to the print, two lengths of 24AWG (~.5mm) wire are required (I used multi-stranded wire). NOTE : [Update Nov., 14, 2024] Two…
Pretty plain jane gridfinity right here. I had half a dozen CR123A's I wanted to put in a drawer and forget about, but coudln't find one already done. Not sure what much more there is to describe.
Double transport tube for CR123a or single 18650. Use cap from single CR123a case.
CR123A battery storage for use with the excellent gridfinity with pin system which needs no magnets https://makerworld.com/en/models/440624#profileId-346300
Needed a CR123A battery and only found a bunch of CR2s in my garage. Ended up making this quick model to solve my need until my battery order arrived.
A very simple battery organiser for my most used batteries
UPDATED: Added two, three, and four count version. Found a great model for AAA batteries from “korvell”, I also needed a CR123a version. I took the single AAA and rescaled it to fit. I then made a model with (3) AAA and (1) CR123a that…
A simple holder for rechargeable batteries with spaces for AAA, AA and CR123A batteries. Organic supports work well for it. I updated the original after using it for a while for better tolerancing and ergonomics. Batteries can more easily…
Remixed kevinb22s 45 degree's sight mount. spare cr123a batter holder Category: Hobby
Note : 123A batteries may also be named as CR123A or LM123A. I made this print to use as a “stand in” battery for another project. As you can see from the included photos, the specified battery dimensions allow for some variations in size…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I love the LYWSD03MMC temperature and humidity sensors from Xiaomi because they have a compact size, a…
A battery holder for two CR123A batteries
Gridfinity 1x1 Battery Bin for 5018LC, CR123, CR123A, CR17345 and EL123 batteries. Holds 4 batteries.
Customized version of http://www.thingiverse.com/thing:128069 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=128069 Print instructions Category: Electronics Instructions Using the following options:…
Here is a charger for CRC123A/RC123A batteries, using a TP4056 charging module. I'd printed other models but found them too tight to place/remove the cells, so I designed this, giving more clearance and using springs salvaged from an…
This custom CR123A Battery Holder is designed to store up to 5 CR123 batteries per row and fits seamlessly on the IKEA SKÅDIS pegboard. The holder is compact and keeps your batteries neatly organized and easily accessible. Printing tips :…
Insert for " Rugged Box with Modular Slots " for holding CR123A batteries. Holds 5 batteries. The CR123A batteries are just wide enough that they won't fit into a single slot.
Holds 4 CR123A batteries Very nice tolerances
Batterie Box / Behälter mit Schraubdeckel für 4 Stück Batterien der Größe CR123A. ………………. Battery box/container with screw lid for four CR123A batteries.
--- for english, please scroll down --- --- moved from MyMiniFactory --- Dies ist ein Adaptereinsatz, um eine alte Duplexbatterie unauffällig mit einer CR123-Batterie zu ersetzen. Neben dem Adapter würd benötigt: die Hülse einer…
This is a holder that allows you to carry two spare CR123a batteries on your rifles top rail, ensuring that if your batteries on optic/laser/torch run low, you have a set conveniently at hand. This is my first draft of this and first I've…
Minimal profile, minimal filament. Sized for 18650 with onboard recharging. Specifically, the surefire 18650 will fit, obviously all unprotected batteries will fit. Streamlight rechargable might fit.
Converts rechargeable CR123A batteries to 223 for use in 35mm film cameras. This is not a commercial product and I made this for my own personal use, I've made it available for others should anyone wish to use this or build off my idea.…
I made this for an Aqara temperature/humidity/pressure sensor but any other may work. It is not rain proof, but adds some protection against rain on windy days under the eaves. The bigger battery is a must in cold winters. Made a hole on…
Rangement piles CR123A 3V Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,28 Infill: 20 Filament: Geeetech PLA Grey Notes: Rangement piles CR123A 3V Category: Organization
The red parts are printed in PETG (nobufil) and the black parts in TPE (esun). The combination allows for a rigid container with grippy and flexible bumpers. The nubs on the inside are supposed slightly bow out, suspending the battery,…
Nie wieder suchen! Dieser kompakte 1x3-Bin wurde speziell zur übersichtlichen Aufbewahrung von CR123A-Batterien entwickelt und fügt sich nahtlos in dein Gridfinity-System ein. 🔧 Eigenschaften: Kompatibel mit dem offenen…
I hate August smart locks, so I had to make this to hold the boatloads of weird-ass CR123A batteries they require. Zero other things I own use this battery, so naturally I needed somewhere to put the ridiculous pile of them. This box…
Der Batterieträger ist für CR123A Batterien gedacht, diese können einfach in den Halter geklickt werden und werden durch eine leichte Federspannung vom Gehäuse am herausfallen gehindert. Die Pole sind sind aus handelsüblichen…
Multibin top designed to hold (4) CR123A batteries.
Clip for 2x CR123A Batteries.
I felt the need to revise this generic concept primarily to create a collection that suited my needs. I store my batteries in a little tote and this plus the other organizers I've made store in there nicely. Print a spare in red for half…
Holds a single CR123A/16340 battery and a single 1/3N battery. Clips into Magpul MOE pistol grips. I printed the main core in Overture PETG. Worked well. Supports are not needed if you enable "make overhangs printable" in the slicer.
Dual Banding night vision puts a lot of weight on your for head and needs a ballast weight on the back to balance the load. Currently using a AOUTACC bump helmet but will receive my real ballistics helmet soon. Fits the curve of the…
Keep 8 CR123A batteries tidy in a Gridfinity 1x2 bin. It is a Gridfinity bin with a 1x2 footprint, so it drops straight onto any standard Gridfinity baseplate. Grid size: 1x2 (1 x 2 Gridfinity squares) Holds 8 x CR123A cells (2 columns x…
Batterie Box mit Schraubdeckel für 1 Stück CR123A Batterie. Den Teil mit Gewinde mit der niedrigst möglichen Layerhöhe drucken. ....................... Battery box with a screw-on lid for one CR123A battery. Print the threaded part using…
A remeix of the great Battery holder, for Opengrid from kaburek, but suiting CR123A and a combo for CR2032 and CR2450
Pick a cell size (or type your own diameter and length), the number of columns and rows, and how deep the cells sit. The pocket entries are chamfered and finger grooves make it easy to grab a cell. An engraved label shows the size, and…
Batterie Box / Behälter mit Schraubdeckel für 4 Stück Batterien der Größe CR123A. ………………. Battery box/container with screw lid for four CR123A batteries.
A simple battery holder for CR123A batteries. This model uses two Keystone 204 contacts. Press the battery contacts into place. They should fit snugly without the need for glue.
Bateriju maciņš priekš CR123A. Izgatavots no ABS vai ASA un blīves no TPU.
Keep Your Gear Powered When It Matters Most Never get caught in the dark! Our Tactical CR123A Battery Holder is designed to securely store an extra battery on your helmet, ensuring your night vision and essential gear stay powered in the…
