28 models
The cooler prints in two parts that is glued together. The three "sticks" that is printed with part 1 is used to strengthen the join. Glue them on the inside over the the join. There is a holder for the HW-585 12V fan controller You will…
Print approx. €10.11–€12.36 excl. taxPreliminary estimate for PETGSource material: PET
Apple Macintosh 512K Model M0001
Print approx. €16.76–€20.49 excl. taxPreliminary estimate for one variant
Large clip that works for 12kg dog bags. I use 2 for mine :) Slides on easily enough, while still keeping the bag together (I usually fold/roll the bag top first, then place the clips. Printed with 0.6mm nozzle at 0.35mm layer height with…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
Kettlebell 12kg
Print approx. €38.87–€47.51 excl. taxPreliminary estimate for one variant
Due to the new printing platform design of the Elegoo Saturn 4 Series, cleaning excess resin can be more challenging. This drip bracket is compact and helps recover a significant amount of unused resin while also reducing platform…
Diese Halterung ist für die Zusatzkühlung der Deye Hybrid Wechselrichter 8, 10 und 12 KW LP 1 - https://www.amazon.de/dp/B0CCRPXSZY?psc=1&ref=ppx_yo2ov_dt_b_product_details LP 2 - https://www.ebay.de/itm/403863623678 Netzteil -…
A large clip by JeyMco for bags like dry pet food. I added treads to the sides for better grip. Ein großer Clip für Säcke wie z.B. Trockenfutter für Haustiere. Für besseren Halt habe ich Profil an den Seiten hinzugefügt.
This is a mod for the Phrozen Sonic Mighty 8K/12K. It is a lid spacer/riser and frame for a PTC heater and W2310 temperature controller. The spacer is used so that there is no drilling/cutting of the cover and base for cabling and…
The adapter snaps into the printer's factory-installed holes. CAUTION: If your material isn't flexible, removing the adapter may be difficult.
Don't know why, but this was one of the most requested adapters?! Print it for yourself or for friends. Use it, love it and leave a like. I used a “Pro Shop Speedloader” to design all of my Speedloader Adapters, it will work with…
Replacement for the audio dials of the Blackmagic Design URSA Mini Pro 4.6K (G2) and 12K cameras, which tend to break quiet easily. I resized my preferred design of the original models, so it fits perfectly. The original models were…
This is a 3D printable case for the ZK-12KX Step-Down Converter. It is to be used instead of the acrylic that is supplied with the board. The Step-Down converter is typically used for DC-DC battery charging and it supports both constant…
A recoil buffer for your Tokyo Marui - Saiga 12K. Its a upgrade to the spring TM puts into the Saiga. I recommend to print it in TPU (95A). Be sure to follow the Print Settings close, otherwise the buffer can wear out prematurely (still…
This particular portable AC model is quite rare as it seems to be a Costco exclusive and whilst Meaco do have other 12k Pro portable models they all seem to slightly differ to this. There's very little information about this model online,…
Print in TPU filament for best results and ether glue them on or use 3m double sided tape. Can be used singularly, in pairs or as a full set. hope these are helpful to someone.
AEG Chillflex Pro 12k — Dual-Hose Intake Adapter Custom adapter for the AEG Chillflex Pro 12000 (model AXP34U338CW) portable air conditioner. It attaches to the unit's compressor air intake and converts it to a hose connection , allowing…
This piece is specifically designed for the URSA Mini Pro 12K and Samsung T7 series' cables. An M2 10mm bolt is used to fix the part to the camera, the USB C cable is pressure-fit. To make things extra secure, you can epoxy the cable to…
This cap is designed to provide protection to the extreemly fragile glass neck of the Macintosh 9-inch CRT during storing or shipping, or while working inside the Mac. Push the cap down over the CRT neck and the four prongs snap onto the…
Верхняя крышка оси Z принтера ELEGOO SATURN 3 ULTRA 12K с усиленным корпусом. При максимальном подъёме платформы по оси Z в ручном режиме происходило изгибание данной детали с последующим изломом крепления. Спроектированная новая модель…
DC-DC ZK-12KX 12An DIN rail mount Board revisions may vary! Mounting holes 75x45 mm Compatibility: DC-DC ZK-12KX 12A 35mm DIN rail Mounting components: M3 screws M3 stand
I made a scale model print of my solar shed design. The scale model serves a useful purpose in planning the layout of my inverters, panels, batteries, and bus wiring. Model can easily be painted in Bambu Studio for multicolor printing as…
This build plate handle leverages the taper of the leveling spring box on the S4/ S4U to clamp and positively lock. No screws needed, just a dab of glue at each end of the handle and the straps. Note the screws for manual leveling are…
This is a replacement for an SGI O2 with the bigger metal base-plate/cage for MIPS 10K or 12K CPUs. If you're lucky to find a complete 10K/12K cage to upgrade your 5K O2, most of the time the plastic tray is missing or broken. This is a…
Resin vat Screw of my Saturn 3 12k Ultra broken and stucked inside. Thus i had to make this holder.
I needed to create this part for my macintosh Raspberry Pi project. Since the original parts were no longer there, I needed to find a way to fill the void where the old brightness control knob used to be. Hope someone finds this useful! :)
This is a cartridge case designed for the JACC64 - 512K cartridge PCB for the Commodore 64. It is also compatible with normal standard C64 cartridge PCBs and many others too. Uses screws to secure the case. Pure printed solutions never…
A simple 80mm x 80mm x 8mm block with rounded edges for installing new film on your Saturn 4 Ultra 12K or 16K. Files include versions with and without text labels.
This low profile mount allows users to mount most mini v mount plates on the kondor blue cage while still providing access to the power switch. it is compatible with only 90 degree SDI cables but other ports are open and easily…
