Counting matching models…
High capacity ammunition box for 150 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. Medium capacity box (100pcs) available here –…
Note: I've added another version of this mod that doesn't require cutting the focuser tube, but adds an additional 5mm to the length. The adapter is called no_cut_m58_focuser adapter. This is a set of adapters to add a 25-55mm helicoid…
This is a clip-on shroud for the Sky Watcher Heritage/Virtuoso GTI 150P telescopes. It is designed to work with my focuser upgrade, but can be used without it. The complete build requires 3 plain shrouds, 1 focuser shroud and 8 clips. The…
Cover plate to avoid a light leak on the main mirror cell
Needed something to allow the attachment of a 3rd party focuser to replace the stock helical focuser. This should fit anything with a male M42 thread. I used an ‘Adjustable Focusing Helicoid Adapter, M42 to M42 Focusing Helicoid Lens…
Skywatcher 150p Virtuoso secondary mirror holder with 58mm spacing between bolts for focuser. Maybe you can edit it for your focuser. For the secondary mirror you can use 3 heat inserts and the original hardware from the stock secondary…
9mm Luger ammunition box for reloaders and competitive shooters. My two-part design provides a superior solution for storing, transporting, and organizing up to 150 rounds. What makes it stand out? It cleverly utilizes the plastic inserts…
Tube rings for my telescope with a custom little counterweight to try and offset my camera/focus weight. Fits my 150mm Skywatcher 150pds tube. Depending on padding material used, you might need bigger or smaller ring-diameter, but even…
For the shroud I recommend a black matte carton paper material over 2mm EVO foam that tends to not hold its shape at the end and thickness that steals light.
Slimmed down the flat part of the original design by about 30%, it cuts an hour off the print time.
This type of mount allows you to attach your focuser motor directly to a tube. Designed for ~170mm tubes. This type of connection is extremely easy to print out of PETG and it's nearly indestructible. Clamping is done via M4 bolt, nut and…
Endcap for the Skywatcher 150pds telescopes cover. It covers a small hole on the telescope cap. I lost mine so made a new one that fits. Printed in PLA, 0.2mm, 15% infill. OBS: If you use the cap to cover for light to take bias or dark…
You can use this bushing to adapt directly to the upper half of this Svbony helical focuser adapter: https://www.svbony.com/products/m42x0-75-reflector Because the bushing is so low profile and the Focuser is as well, the focal length of…
Update: Added v2.1. This adds a second finderscope shoe and makes some size refinements for the clamps and thumbscrews. Update: Added v2.0. This extends further forward to provide more surface area, and has wraparound clamps to better…
This simple adapter allows you to plug stock finderscope of Skywatcher 150p into the polar finder slot of its EQ3-2 mount. While it's far from optimal and not extremely accurate, it's good enough. You can get pretty good aligment by…
You want to attach an additional guidescope to your scope without drilling new holes? All slots are occupied? Clamps to the rescue! You can't have too many clamps on your telescope. This is very fast and easy to print clamp that can be…
Cover with a fan setup
I bought this compressor for my motorcycle, but it travels with the packages. So the other tings can press the power button and discharge the batteries. So I made this. You can fix it with a rubber, or put the whole thing in a textil bag,…
This is a simple jig I designed to make it easier to set up the Sky-Watcher Virtuoso GTi / Heritage 150P GoTo tabletop telescope on a Star Adventurer tripod. This ring slides directly onto the mounting plate of the tripod, and once it’s…
This is a magnetically attached hood for Sky Watcher Virtuoso and Heritage 150P telescopes. It is designed to prevent leakage from nearby light sources. For maximum effectiveness it should be paired with my clip-on shroud:…
It prints with supports on build plate only with no issues. I printed at 100% speed and standard 0.2 and had no issues with it. reduced the length to reduce filament. should be around 160g
Note: I've added another version of this mod that doesn't require cutting the focuser tube, but adds an additional 5mm to the length. The adapter is called no_cut_m58_focuser adapter. This is a set of adapters to add a 25-55mm helicoid…
This is a clip-on shroud for the Sky Watcher Heritage/Virtuoso GTI 150P telescopes. It is designed to work with my focuser upgrade, but can be used without it. The complete build requires 3 plain shrouds, 1 focuser shroud and 8 clips. The…
Cover with a fan setup
Slimmed down the flat part of the original design by about 30%, it cuts an hour off the print time.
This type of mount allows you to attach your focuser motor directly to a tube. Designed for ~170mm tubes. This type of connection is extremely easy to print out of PETG and it's nearly indestructible. Clamping is done via M4 bolt, nut and…
You want to attach an additional guidescope to your scope without drilling new holes? All slots are occupied? Clamps to the rescue! You can't have too many clamps on your telescope. This is very fast and easy to print clamp that can be…
