Counting matching models…
Description Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of…
Layer - 0.2-0.3mm Walls - 2 Infill - 15% No support !
This is a quick N Scale (1:160) model I did of an old house in Chance Harbour, NB, Canada. This model is meant to have inkjet-printed siding and roofing details added, in an experiment to create more detailed models at that small scale.…
Desk mount for a Thrustmaster T16000M HOTAS. This design will lock the mount in a forward position, so it's best placed either in front of you, or closely off to the side. This assembly is not entirely customizable like other models…
N scale Shipping containers that are designed for FDM Printing
I wanted to display my iPod Classic 160GB and in Parallel have it on a Dock, so I created a small stand where you can put in the 30pin cable and charge it well. Printed with PLA and 5% infill (you could do more for stability)
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
This remix of the "Skadis continuous shelf" is wider and deeper. Its 223mm wide and 160mm deep.
The model is not optimally adapted for 3D printing, so some experimentation will be necessary. If you like the model, I'd love to hear your feedback! You can rate it, leave a comment, share suggestions or questions, and best of all—post a…
H0 1:87 scale models of oil barrels in 200L, 120L and 60L sizes. Designed to be printed with a 0.4mm nozzle at a layer hight of 0.1mm. It can be printed standing up and doesn't need supports.
This is a building I designed for a small shop+office building for my train layout. The building and windows should print fine in the orientation shown. You might need supports for the building window openings, depending on your printer.…
The original injection molded handle for the MacAllistar MLMP1600 Lawnmower is far too flimsy and is prone to splitting near its pivot point. (See image of blue handle) It was impossible to find a spare online so I decided to model it…
For a diorama I needed a park bench and found this wonderful design. The item was made unfortunately for 1:24-scale. To make it printable for n-scale I had practically to remake all parts in a more strengthen way. I tried to make it as…
Printed on SLA printer. 20 pcs per print.
Building I designed for a small non-railroad industry on my train layout. The building and windows should print fine in the orientation shown. You might need supports for the building window openings, depending on your printer. I have…
When I found this model on Thingiverse created by Windham Grave, I just had to print it and then I thought this model must be available on Printables, being a website hosted by a Czech company… and here it is. The Praga V3S is probably…
Spiral Bed Level Test These are Spiral Bed Leveling tests created using an OpenScad File. The OpenScad File is included so you can customize your own Spiral test size. I use these to set the Z Offset on the fly after auto leveling with a…
I saw and liked this big loco that was made in America for use in Europe during WW2. This is a work in progress, but I thought someone might like to see it as it grows. I will hopefully build the complete train as one STL for those that…
I remodeled the cleat from Wilko in Solidworks with a couple of lengths. You can choose between 100 mm to 160 mm in steps of 10 mm. The holes stay the same diameter, but change in distance. So be carefull not to drill the holes and change…
UPDATE: -Added 3 new sizes: 96mm, 128mm, 160mm hole spacing -The 130mm is not a standard size I guess it should be 128mm, so measure twice, print once. This is an IKEA-style kitchen door handle made for 130mm hole spacing. Please measure…
SS Daniel J. Morrell was a 603-foot (184 m) Great Lakes freighter that broke up in a strong storm on Lake Huron on 29 November 1966, taking with her 28 of her 29 crewmen. The freighter was used to carry bulk cargoes such as iron ore but…
Model train tunnel scale 1:160 for 3d priting.
This is not my design. It's a joystick remix of a gimbal designed by user Karavan on IL-2 Sturmovik forum: https://forum.il2sturmovik.ru/topic/13252-3d-печатная-механика-объект-77-б/ and shared on Thingiverse and v2 on Thangs. Images and…
LCD 1602 modules looks ugly and unprotected so decided to design a simple and compact case for them. The dimensions of mine LCD module are in the pictures. Piece fits perfectly and holding it's own. Attachment holes are 4mm and designed…
The only difference from the original is that the clamp and bolt are 30mm shorter to make it fit better on desks with a thinner edge. This also helps make the mount Slightly stiffer. Nothing else has been changed all the bolts and caps…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
⚫ URSUS 1604 ⚫ !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. Ursus of this type will be the only one. I will focus on the older ones. I only made it because it was…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [June 15, 2024] I just added 2 more sizes, medium (M)…
Piotr Stachu , alias Pietia, from Poland is in my eyes one of the most impressive designers at Thingiverse: https://www.thingiverse.com/pietia/designs I really love his models and especially the buildings are very useful also for model…
Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Prusament PLA PLA…
1602A / I2C LCD Display Module - 16 X 2 Text LCD - I2C CTRL Adaptor included Buy from Amazon here!
Two sizes of lumber loads for 61' and 73' N-scale centerbeam/spline rail cars. Also included are templates for cutting out the paper "load-covers" that get wrapped around the printed block. (Don't cut out the middle rectangle - it's just…
Collection of a multitude of different base sizes. All bases are compatible with various tabletop systems. Are the same size as all Games Workshop bases and indistinguishable from them. All bases come with or without predefined magnet…
Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Tu-160 White Swan soviet strategic missle-bomber Category: Models
A chemical facility that I'll eventually use on my N scale layout. I have not yet printed this structure, but I don't suspect it will have any troubles. Supports are likely required for the large window spans of the main building. The…
This upgrade is used to remedy the increased resistance of the Thrustmaster T.16000M throttle after some time. It is possible to add magnets to the model to get magnetic detents at the 50% position. For this you have to glue the Magnet_50…
The Dell T160 is too new (in 2025) to buy spare parts for it, and so, we cannot buy the Dell T5CVH part, which is the 2.5" tool-less non-hot-swap caddy for this server. It's sold with drive only by Dell. So I created this model from…
This model is compatible with the lego system.
This is a really fine track bumper for N-scale model railroads. It's measurements are based on the Walthers model that is commercially available. I suggest printing on a resin printer. Included is an STL file of 10 bumpers with supports…
Jednoduchý organizér pro cokoliv. Tento byl dělaný pro makeup, ale použít se dá jakkoliv. Ať slouží… v2 - Pro lepší tisk jsem nahrál části odděleně. A simple organizer for anything. This one was made for makeup, but can be used in any…
Remix of the great GAZ66 model of Pfelpensson, here with standard box used in different modifications for maintenance/repair workshops, laboratories, field kitchens, medical service and many other purposes. Model is hollow with holes in…
A remix of my "A-140Z atypical" bunker. This is the A-160Z , in contrast with the previous model, this is a pretty standard specimen of the A-160 type (which was the most common of all types). --- Varianta mého předchozího modelu…
This design is an 1/8 scale model and will compliment my design of the Brewster Bomb Rack of WW2 used primarily in the Pacific Theater by U.S. Marine Corp aviation units flying the early F4u Corsairs. You will need to purchase 2 sizes of…
A holder for the DYMO Label writer suited for the 160 and 280 series. Available with hex inserts as well as with full hex.
Designed to replace the weak original battery plug covers … :) Material: ASA/ABS
Das Modell der Tram Typ E1 (Düwag-Gelenktriebwagen) der Wiener Linien habe ich als Standmodell für meine Spur N Modellbahn im Maßstab 1:160 konstruiert und 3D-gedruckt (ohne Beiwagen). Das Modell eignet sich ideal für Modellbahnanlagen,…
Single support for Mellow's TMC 5160 HV to be hooked to the DIN rail I made them for my VZ-Bot 330 that I have under construction. I printed them with PetG You will need for each support: - 8 M3 x 4.6 brass inserts; -4 M3 x 10mm screws;…
Vit Budina makes wonderful print-in-place models of trucks and cars: https://www.printables.com/@VitBudina/models even more for money at https://cults3d.com/en/users/budinavit/3d-models Some of them are well-made replicas of real cars,…
1st test print with these settings, I think you can get away from the Agua Blue, didn't really add too much to the print. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Azure…
Klimaschlauch Adapter 160 mm für gekippte Fenster Praktischer Adapter für mobile Klimaanlagen mit 160 mm Abluftschlauch
VZBot electronics mounts on din rail: Orange Pi 3LTS BTT Octopus PRO with 5160 Only BTT Octopus PRO PSU Meanwell RD35 DINrail clip You'll need screws and nuts M3
1:64 and 1:160 Sushi Machine Garage Diorama gluing required gluing the roof to the frame is optional
An approximate model of CN/CP snow / rock sheds found in the Thompson River Canyon, in Canada. Category: Buildings & Structures
Quick model of an N Scale Girder Bridge, based loosely on the similar Micro Engineering bridge. For FDM Printing, you'll need to print: 2 x sides 2 x braces, 6-7 x cross members. If you have a resin printer, I've had good success printing…
I liked the original design but wanted to have it a bit wider
VJM787 made a fine detailed model of the ASU85. Unfortunately it is not printable in smaller scale, especially the tank track fall apart. I liked to make it printable for a future project, so I did. On CAD-screenshoot you can see all red…
This is basically the work of LUNA-M and Polizeilada (see source section below). I just put them together and made modifications to get them printable for smaller scale. It’s a modular trailer system of the East German army, here with…
Print with more wall layers or higher infill to allow to better screw in.
Modelo a escala del Robot Industrial de la marca ABB serie IRB 1600, esta completo para editarlo con SketchUp , una vez impreso se pueden unir internamente todos los ejes con una goma elástica.
Remix of the great models of Pfelpensson & somtec (see source section below) The truck cabin was modified to airborne version of the GAZ66. The Zu23-2-canon is a fixed one with strengthening at some places, to be able to print. Sized for…
The 10-series was the name for upper mid-size cars produced by Austin in four different reincarnations from 1911 till 1947. Within the legendary collections of wargamer models created by M_Bergman (…
I could not find long enough support for my bed, so I designed one. It has holes for 4mm screws. It was designed to be about 200mm but it can be adjusted from ~155mm up to ~230mm (not much thread left there so be careful). I originally…
A storage box to store 160mm sharpening stones mounted to aluminum backs. This box comfortably fits my stones without them being snug, but yours may be different, and printer tolerances will make a difference. Models are included for 5 or…
Renault Alpine A310 1600 VE aka. Misato Katsuragis car
This is the EW 160E set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
Um größer Mengen Kaffee einzufüllen (ca. 1Kg Kaffee) hab ich diese Erweiterung für den Bohnenbehälter erstellt. v3 ist noch nicht ganz ausgereift - funktioniert aber schon To fill larger amounts of coffee (about 1kg of coffee) I have…
This model is designed to be printed as three separate parts and then snapped together. Print one plate and two arms , flat on the bed. The orientation should already be set. I recommend PETG, ABS, or ASA for best performance. In theory ,…
Basic hopper bin with Auger. Holds 160 Bushel. 1:64 Scale
Remix of the great GAZ66 model of Pfelpensson, here the R142-version, a radio and command post, used within eastern armies. Model is hollow with holes in bottom. One version is with interior, you may see the radio compartment forward and…
Building I designed for a small non-railroad industry on my train layout. The building and windows should print fine in the orientation shown. You might need supports for the building window openings, depending on your printer. You can…
Study mount to attach a T16000m HOTAS system to a Poang chair. It's a bit long of a print and requires eight M5x40mm bolts, and eight M5 nuts, but it's secure, adjusts back and forth, and easy to assemble. Tolerances should be big enough…
2 versions: - 8u stackable - Nonstackable
Hello, Today I have a Box for you, a 160x120x70 container . Ideal for harvesting fruits and vegetables. Also suitable for storing food and other things. The boxes fit together nicely, they can be stacked on top of each other. I used…
16x2 1602 LCD Display holder, freely adjustable version
A very nice building. I built it in HO scale. I remixed a bunch of stuff and printed it at 56% for N scale
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
We have some decals around our rain collection IBC so the normal spout doesnt fit well while being attached directly. This extension solves that issue.
Endcaps for aluminiumsprofile 40x40, 40x80, 40x120 and 40x160
I replaced DeepCool CH160 glass panel with this design which replicates the 3.5mm squares on the rest of the PC case. I printed this on BL P1S and split the print down the center. I added butterfly clips which are used to keep the two…
Can be printed without support Can be arranged to a bigger shelf if you print more.
This model is compatible with the lego system.
"My grandparents' house at a 1:160 scale. Not optimized for 3D printing. You'll have to experiment ;)
The ÖBB 1116 is part of the Siemens ES64U2 family of electric locomotives. It is also known as the Taurus and is widely used in Austria. This is one of the first 3D models I created in Blender, so there are still some minor issues. Some…
Using these parts one can replace the low quality potentiometer in the T16000M yam axis with a hall effect sensor. You will also need: A1324LUA-T hall effect sensor two 5x2mm N52 magnets see…
Summary And again a remix of Pfelpensson's great GAZ66. That time it’s a soviet AP2-field hospital/ambulance, still in use in armies and medical services of successor states. I included a picture of an Ukrainian unit, used in Iraq,…
This extension is designed to keep the twist axis, and be completely removable. No cutting or modifying the original parts. Edit: To adjust the drag and so the twist axis centers properly a small amount of grease can be used on the shaft,…
Should you need to print replacement grips, or want to convert a left to right handed grip, these scans should get you started.
Made a box for the dymo 160 label printer . I'm still a newbie at fusion 360, so it's not a perfect fit, but close enough :) You'll need to print one each of the (box, lid, infill, seal), and two latches. The infill I printed a semi-soft…
Printed without any supports. There was some stringing and sagging but nothing major. Cleaned it up in less than 5 minutes and it was good to go. Holes are 3.2mm wide so M3 screw should go in without any problems. What's needed…
cutted both sides and put them together again to fit a width of 160mm
Remix of the HSW Dymo 160/280 Holder. Mount to hold the Dymo label maker on your Honeycomb Storage Wall. I have been using the original version of this for a few months but found that it stretched over time and made the grip loose, to the…
Most permanent model railroad layouts are somewhat mountainous but fences that one can buy are usually only made for flat landscapes. To my knowledge, only PECO has addressed this issue (N/OO/O-gauge):…
Store your picks, thin screwdrivers, markers, or similar max 160mm length objects in this 2x4 Gridfinity holder. I designed it for picks in a way that protects the pointy bits. It also helps to quickly put the tool away, as it leans…
I liked the original project ( https://www.thingiverse.com/thing:4748009 ) and felt it was a good fit for an area I was about to design a new building for. I scaled the design files to fit N-scale (54%), and pre-assembled the walls and…
A 3D printed case for the Bigtreetech TMC5160T Plus based on their CNC case. This is a relatively complex and thin print with fully supported holes that stays within the footprint of the board. This model supports the attachment of a 3010…
This is a remix of garylavart's "COOLING TOWER 1:87 HO SCALE" on Thingiverse with some additions and modifications. I scaled it down to N Scale 1:160. Scale it up by 183.908% to return to HO. I printed this on my Q2 with MMU: Silver parts…
For external stepper driver BTT TMC5160T PLUS V1.0 (w/o case) . Assembly Guide Fit [POS 2 - adapter] to [POS 3 - DIN rail bracket] using 2x [POS 6 - screw - M3x8] to create [sub assembly 1]. Fit [POS 5 - axial fan - 3010] to [POS 1 - fan…
This model is compatible with the lego system.
![#0160 STRONG #8 Double Split Key Ring [Now in 3 Sizes] - Meets the Demands of Everyday Use!](https://media.printables.com/media/prints/882190/images/6973635_70917259-84b2-499f-960f-fad3fdcc88dd_075896ec-f90e-44ee-a71a-f737aaffc980/20240615_001451.jpg)
