Counting matching models…
Panel mount for XT60H-M connector. This variant was used on material that was ~ 0.625" / 15.875mm thick. Plug is a tight friction fit, installed from the back. The inner plate has just enough protruding to locate it in the hole and hold…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Deutsch Ein Ersatzabsaugstutzen für die Metabo TKU 1693. Das Teil hat in der original Explosionszeichnung die Teilenummer 211. Die Artikelnummer lautet 1381695480-324. Sollte auch für die Metabo PKU 250 passen. Ich empfehle folgende…
Print approx. €15.21–€18.59 excl. taxPreliminary estimate for PETGSource material: PET
Wall mounting your Lego Technic model frees up valuable desk or shelf space, making it a great option for smaller rooms or offices. Custom designed bracket specifically tailored for specific lego technic supercars and provide a secure…
A replacement battery cover for Denon RC-1192 remote. Printed in PLA, but I think that PETg or ABS will be good too. Print instructions Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Any PLA
Why print many drill bit holders when you can print one that potentially exceeds your needs? 13x13 bit grid on a 3x3x2 gridfinity bin will allow you to store 169 6mm bits with an 8mm cavity. DISCLAIMER: it may be printer configuration…
This model is compatible with the lego system.
“Years ago" Inspired by all kind of clever solutions at the time, I designed a dispenser for 330ml cans which printed in only 4 pieces on my BIG 3D printer (~450mm x 450mm x450mm) which rests in piece ;-( Luckily the local brewery decided…
Had this for a bit and decided to post it even though I have not printed it yet, which I really hate to do as I think everyone should print their own project first just to make sure nobody else wastes material and time but I just don't…
This is a collection of stackable boxes, compatible with for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer…
This is a replacement shelf for a Frigidaire 241691311 refrigerator. It goes on the upper section of the door. The shelves that come with this refrigerator are an extremely poor design, and break almost immediately if you put any weight…
This model is compatible with the lego system.
this contain hold 169 screw driver bit to help keep all the bits in one place.
This model is compatible with the lego system.
NEW GENUINE MERCEDES BENZ W169 W203 W204 W209 W212 - BALLPOINT PEN HOLDER Since my pencil holder cracked, I drew new one, which are a little stronger in some corners, but it is very similar to the original one. Work perfectly! Printed…
This model is compatible with the lego system.
This model is compatible with the lego system.
ITA: Ho disegnato i supporti per la cappelliera della fiat panda 169. ENG: I draw the supports for Fiat Panda 169 hat rack.
This model is the result of an experimental scan cleaned up with AI. It is not pretty in the viewport but the slicer smooths out a whole bunch of the issues. I wanted one for Gaslands. it's got no wheels, but there are millions of wheel…
Four Sleazy Pieces Tray-packing puzzle by Stewart Coffin (STC #169-A) Fit all four pieces into the rectangular opening. Four Sleazy Pieces is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it…
I needed a lightweight stand for my ASUS MB169B+ monitor that required less space than the case stand requires. I did find some other stands that were at a fixed angle but every so often I need a different angle. I also wanted to have…
I used petg for this use organic supports
Because it broke and would break again, I designed this hitch raplacement eliminating further frustration. Trailer part in PLA surprisingly rigid even with the openings. more beefy grips firmly easy to use for the kids much freedom when…
Ersatzteil für die Höhenverstellung einer Metabo Tischkreissäge. Ein original Ersatzteil ist leider nicht mehr erhältlich. Zur besseren Stabilität wurde die Spindel im 45 Grad Winkel mit Support von der Build Plate gedruckt. 100 % Infill.…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
modified to be used for set 42169
Needed this after removing the useless “Smartphone Integration” from my 2015 428i. This apparently fits many models and years. I originally intended to print this in TPU but my nozzle clogged mid-print. So went with PETG. The fit is…
Note, that the pins are NOT the same size. Hence the two models for driver and passanger side. I secured it to the housing with double-sided tape. Both on the back and bottom side.
Mobile antenna holder MFJ 1699T, mounted on IC-705 radio Category: Hobby
Made it myself cuz coundt find it anywhere Print without Raft, use more than 80% fill and use supports :)
Given the disparity in our heights the front seats in her B200 are adjusted forwards and backwards rather regularly. This is done by lifting the lever under the seat, and scooting in the desired direction. However, while the Benz is in…
Halterung für Sepura Lautsprecher Mikrofon sRSM 300-01169 zur Befestigung an einer Wetech Ladeerhaltung mit den vorhanden Schrauben. Lochabstand der Befestigungsschrauben 40mm Variante für links und rechts Gedruckt mit TPU 95A. So…
Set of Legs to hold Asus MB169C+ Monitor. Designed for use with Dell Latitude 5591 Laptop, because the included folding cover/stand is a nice cover, but a terrible stand. One leg has an opening to allow the USB-C cable connection. Holds…
I got the idea from @arnmac 's monitor stand ( https://www.printables.com/model/151648-asus-mb169b-monitor-stand ). Looking at that model I was struck by the fact that the monitor's center of gravity shifted as the monitor was moved to…
I designed larger feet because the feet of the original step always press into the floor if the ground is too soft. I hope someone can use it... I printed it with the settings in the 3mf. Works great. A little superglue when assembling…
A tray for the ICON 8 in. 3-Position Slip-Joint Pliers [59169] There are options for stackable and nonstackable with both small and medium tolerances, as well as basic non-gridfinity trays
Fuel valve lever for Honda XRV 750 africa twin 1993-2003.
Replacement for A1697420181 used in Mercedes Benz Viano / Vito. The advantage over the original part is that you can easily scale this model to fit into corroded and other wise enlarged stock holes. Ideally print in TPU since the part is…
Knipex 169501 Holder screws on with M3 screwsKnipex 169501 Holder screws on with M3 screws
Replacement pivot arm retainer parts for Bissell 1699 Proheat Clearview Powersteamer Carpet Cleaner. These retainer clips are components of the replacement part number B-555-9113. Included in the STL files are right and left parts when…
This model is compatible with the lego system.
The wheel housing on my Pelican 1690 case was damaged to the point it couldn't be repaired. I designed this as an improved replacement. Parts List: 2pcs Wheel Housings 2pcs 8mm Nuts 2pcs M8x110mm Hex Bolts 4pcs 59mm Roller Hockey Wheels…
In the past I was struggling to find this scoop by De'Longhi so after all I decided to make one for my self so I can do a holder. You can find holder for this scoop here:…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** NO MORE nail clippings launching themselves away in…
Halterung für Mini-Schraubenzieher von PB 53 + 169 Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 1x 3D-Print "S37x9…
This gearbox is designed to be used for a telescope drive with NEMA 17 motors. It is based around the kinematics of cycloidal or eccentric gears, such as this other design of mine. Instead of gear teeth, it uses GT2 belts with matching…
5x5 gridfinity holder for CNC bits.
Mercedes W169 CDI Keychain This keychain is inspired by the sleek Mercedes W169 CDI, perfect for fans of this iconic model! It was printed with a 0.2 mm nozzle for optimal detail and precision. The printing took approximately 2 hours.…
This is a custom insert for the game Salem 1692 for use with 4 x 6 Photo Caddy boxes. My Photo Caddy is Iris branded.
Diese minimalistische Steckdosen-Halterung für die Apple Watch (kompatibel mit dem Apple USB-Charger A1692 und dem Ladekabel MX2H2ZM/A) ist die perfekte Lösung für alle, die möglichst wenig Platz nutzen möchten. Der Halter habe ich für…
This is a body surround (grease sheild) for a West Coast Products, 2nd generation (before the X drive), swerve module (part number WCP-0169). It is a 2-part surround designed to be snapped onto an already-assembled swerve module, snapping…
Siku LKW mit Absetzmulde 1695
Variation of the cardholder that let contain the cards with sleeves
General The original Honda fuel filter with the part number 16900-MG8-003 is either expensive (Genuine Honda) or from questionable quality (China). The MANN WK 32/7 filter is readily available for less than 10€ at all (European) parts…
When my compressor arrived, this isolator was broken out of the box. I did not see that immediately and only much later realized this. I looked online but could not find the correct part, so I used the broken parts to reconstruct this.…
ARTE&DISIGN GT169 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This is a replacement handle for a Wilton 11694 Cross slide Vise. It can be used on either the x or y axis lead screw. One end is hollowed out for a lead insert to balance the turning handle that threads in to the other end. The turning…
Customized version of https://www.thingiverse.com/thing:834725 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Font_name = Racing Sans One Text = 169…
ORGANIZZATORE GT169 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
Jde o zakrytí matic v prostoru pro nápoje (plechovky), aby tam nepadal bordel. Originálně jsou tam gumové podložky. Ty už tam bohužel nemám, tak jsem si dodělal vlastní. Ty údaje jsou tam přidaný ze srandy.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
92075-169 A TPU printable version of the original rubber damper. Note that there is a recess in the bushing and it will turn out ugly without support. I am using them today on my bike, they seem to fit appropriately! Doubt anyone will use…
The difference is the diameter of the bolt part. Reduced it from 20mm to 19mm. I know its super easy to adjust in slicer, but might save someone from printing waste like I did for the first try. Used PETG 50% infill.
After installing a few of these panic bars, I realized how long it took to measure the drill locations to install these on fresh doors. So I made a little template to speed up the process. Now you only need to find the center point and…
Cover for modern outdoor wall-mounted lamp with lightsensor cutout. Measurements on the drawing in mm. Best printed in P
Made this for my daughter to house a round kitronic 2169 light ( https://kitronik.co.uk/products/2169-round-5v-led-matrix-lamp ) as ceiling lights in her doll house. She liked the simpel design of the ceiling light by Makermatto…
Print in PETG for flexibility, but PLA will hold as well. Increase infill density for desired sturdiness, but I've found it holds well at just 10%. If you are printing your own shelves or dividers, 3mm of thickness should hold pretty…
New 2018 EU fuel label tags for gas can. acc. to EN 16942:2016 / 2014/94/EU
Made these for a used CURT 16900 5th Wheel trailer hitch that was missing its original sound dampening pads, this eliminates the 2mm gap between hitch and rails when towing. The pads fit snug between the hitch and rails eliminating…
Model: Philips 16936/93/16 - Außenleuchte MYGARDEN ACRES 1xE27/20W/230V Cover for modern outdoor wall-mounted lamp. - Trapezoid shape - best printed in PETG (clear or translucent white) --- Abdeckung für moderne Außenwandlampe. -…
Technic Steering Wheel Hub Holder with 2 Ball Joints and 2 Axle Holes (6583540 | 7169)
I bought a Shapton Pro 1000 and afterwards the Sharpal 169h. The Sharpal didn't come with a box so I created two adapter pieces to be able to put the Sharpal on the existing Shapton Box. I used Claude to create the adapter and also asked…
Created from original spare parts. Manufactured and tested.
map of Tsardom of Russia 1690
Made this for my daughter to house a round kitronic 2169 light ( https://kitronik.co.uk/products/2169-round-5v-led-matrix-lamp ) as ceiling lights in her doll house. She liked the simpel design of the ceiling light by Makermatto…
Jde o zakrytí matic v prostoru pro nápoje (plechovky), aby tam nepadal bordel. Originálně jsou tam gumové podložky. Ty už tam bohužel nemám, tak jsem si dodělal vlastní. Ty údaje jsou tam přidaný ze srandy.
This is a collection of stackable boxes, compatible with for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer…
![[ALCH] stackable modular boxes in 6 heights and 9 dimensions (169 variants!) (ModuBox)](https://media.printables.com/media/prints/480542/images/3928335_14b3996b-2bdf-4a15-b686-0b93b75cb299/img_0565.jpeg)
![ICON 8 in. 3-Position Slip-Joint Pliers [59169] (Gridfinity)](https://media.printables.com/media/prints/44311ebf-79f3-4bc7-8872-bb6259bd20c7/images/10717087_8845feb5-c521-4cba-8408-f0d7fa8464cc_86f33bda-fd5d-4b14-b866-38f7d1dd3210/icon_8in_slip_joint_pliers_59169_screenshot.jpg){kind=icon}
