Search results: 1772

Sort order

84 models

P
PrintablesJerrari

EV Charger Holder J1772

Tired of your charging cables laying all over the place, tripping over them at night? Why are you in the garage in the dark, at night?? The ⚡ EV Charger Holder J1772 ⚡ is designed to hold an at home Level 2 EV charging plugs and cables…

Downloads
3,563
Likes
529
Rating
4.92
P
Printablesisaacf

Tesla Model 3 Driver's Door J1772 Adapter Dock - Rear Mounted

This is a J1772 adapter dock for the Tesla Model 3. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…

Downloads
3,259
Likes
298
Rating
4.9
P
Printablesisaacf

Tesla Model Y Driver's Door J1772 Adapter Dock - Rear Mounted

This is a J1772 adapter dock for the Tesla Model Y. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…

Downloads
3,130
Likes
248
Rating
4.96
P
PrintablesKen

J1772 EV Charger Holder

J1772 Charger Holder. Slim profile - doesn't stick out from the wall too far. Mounting holes are aligned so that you can mount it to a single stud. Loop the extra cord over the top. No supports needed as long as you print it on its side…

Downloads
3,026
Likes
307
Rating
4.89
P
PrintablesKen

J1772 EV Charger Holder - Remix

Similar to my other model, but the charger is inserted perpendicular to the wall. This provides easier access, but does make the charger stick out further from the wall. The whole reason I made the first one was to get something flat up…

Downloads
1,329
Likes
119
Rating
4.85
P
Printableswedgeworks

J1772 Adapter Lock for Tesla Model S 3 X Y

Ensure the safety and security of your Tesla electric vehicle with this Tesla J1772 Adapter Lock. Designed with Tesla owners in mind, this innovative accessory provides peace of mind and convenience when charging your Tesla Model S, Model…

Downloads
1,041
Likes
104
Rating
4.67
P
Printablesryantaylor

Bi-Directional J1772 Tesla Adaptor Lock

A design by EGoe from Thingiverse for a J1772 Tesla Adaptor Lock, with some considerate modifications: Bi-directional There is a small press-fit that helps keep the ring attached to the adaptor while you carry it around. There are two…

Downloads
900
Likes
101
Rating
5
P
Printablestrentjk

J1772 EV Charger Wall Mount Holder Remix

This EV Charger wall mount for J1772 plugs takes up a lot less space, protruding less than 3" (76 mm) from the wall! The 90° plug at a 45° downward angle is accessible and easy to plug in. Features: No holes in your wall! The wall mount…

Downloads
475
Likes
48
Rating
4
P
PrintablesKXNT

Tesla Model 3 J1772 adapter holder for door cup holder

Designed to fit my 2020 Tesla Model 3, may fit other years as well. I downloaded another model from here that was designed to fit a 2021 and it did not fit my 2020 so made my own Tesla Model 3 J1772 adapter holder for door cup holder.…

Downloads
421
Likes
46
Rating
5
P
PrintablesLyricPants

J1772 EV Charger Wall Mount Holder

A simple wall mounted holder for the AC port of a CCS1 charger. Please check your vehicle charger for compatibility. Mounting This model was designed to be mounted directly on the wall, utilizing key-hole slots to be easily placed and…

Downloads
413
Likes
30
Rating
5
P
PrintablesJon H

J1772 Nissan Leaf OEM holder and wire wrap

Printed .2 Supports not needed but is cleaner.

Downloads
403
Likes
59
Rating
4
P
PrintablesKXNT

Tesla J1772 Lock Ring

Lock ring for the Tesla J1772 adapter to keep people from unplugging your car while charging.

Downloads
324
Likes
25
Rating
5
P
Printablesryantaylor

Tesla J1772 Charger Door Insert/Holder

A Tesla (Model 3 '21) J1772 Charger Door Insert/Holder by richardlonwalker . This is a helpful model for remixing for those who don't want to open the trunk to grab a charger adapter. Some suggested modifications based on test print (see…

Downloads
308
Likes
37
Rating
5
P
PrintablesJames

J1772 EV Charging Cable and Plug Holder Remix

J1772 Charger Holder designed by Ken . This is a great design with a slim profile perfect for an area with limited space. I just added higher cable holder walls similar to trentik's remix , and rounded the corners. Print in the…

Downloads
302
Likes
30
Rating
5
P
Printablesmkoistinen

Tesla Model 3 Console Tray with integrated USB Hub + J1772 Slot

OK, so this is a remix of my own model here: https://www.prusaprinters.org/prints/5805-tesla-model-3-tray-wj1772-storage-slot . I've integrated a USB Hub into the tray. This essentially adds 3 more USB ports, which is perfect for me to…

Downloads
290
Likes
104
Rating
5
P
PrintablesTwentySix2

J1772 Plug Holder with Cord Management for EV chargers,

We have a PHEV and wanted to have a place to keep the charger cord outside since the car is most often parked in the driveway. SCRAT82 had a great design but the screw centers were too close - we wanted the screws to line up with the…

Downloads
255
Likes
42
Rating
4.67
P
PrintablesElanaut

Wall Mount J1772 Holder

Just got an EV after my old car finally had enough. I designed this wall-mounted J1772 connector holder with a built-in cable hanger that can be printed without supports. The mounting holes are for (2) #10 pan/button head screws. This can…

Downloads
234
Likes
14
Rating
5
P
Printablesmkoistinen

Tesla Model 3 Tray w/J1772 storage slot

I had a look around and saw that there were some models like this already, but I wanted to make modifications and found that editing the STL files was a nightmare due to their construction in other programs. So, I set out to make my own…

Downloads
227
Likes
39
Rating
5
P
PrintablesGrant

Tesla J1772 Adapter Charger Plug Holder

Holder for J1772 charger plug with Tesla adapter attached. I liked Gizmotoy's rounded plug holder (based off of jakepoz's non-rounded plug holder), but it doesn't fit Tesla's J1772 adapter, which is much thicker a little too close to the…

Downloads
226
Likes
27
Rating
5
P
Printableshag

Simple J1772 Dummy Socket

Another J1772 dummy socket for your charge cable. There are already a few of these on Thingiverse, but I decided to design my own because I wanted a cleaner look to it. The other ones that I considered printing all had a pretty big…

Downloads
177
Likes
21
Rating
5
P
Printablesthall72
Downloads
176
Likes
34
Rating
0
P
PrintablesKeith Kyzivat

Angled J1772 Dummy Receptacle - Bigger J1772 securing pin

This is a remix of hag's J1772 Dummy Socket model, for which I have enlarged the opening holding the J1772 handle's pin that keeps it in place in the receptacle. The receptacle itself is angled, and has two holes for screws*. Good for…

Downloads
161
Likes
6
Rating
5
P
PrintablesPhantom987C

J1772 EV Charger Mount and Cable Hook - Remix

Added a little update to this one: Strengthened structure in the cable hook area and updated for using 2 bolts rather than countersunk screws. Also made the back plate more robust. Probably overbuilt for most people… 7mm through holes.…

Downloads
159
Likes
18
Rating
5
P
Printableslromandine

Tesla/NACS J1772 Adapter Charger Plug Holder for Outside

Holster your J1772 with Tesla/NACS adapter on the wall in a weather safe manner. Print in PETG, ABS, ASA, etc. for UV protection. 30% gyroid infill worked well for me. Mounting holes tested with Tapcon 3/16 concrete anchors.

Downloads
153
Likes
10
Rating
5
P
PrintablesCeptoRider

Tesla J1772 Adaptor Holder

The original design has a flat mounting surface that will allow hook & loop (Velcro), 3M VHB, or drill for screw/rivet, to attach in a convenient location. I elected to mount via velcro to the interior fabric wall in the rear nook of the…

Downloads
150
Likes
24
Rating
0
P
PrintablesBlake Haas

J1772 Wall Holster for Morec EVSE and Others (Universal)

I printed the Wall j1772 Holster by Falcon64 but I found out that the latch on my Morec EVSE didnt quite lock on his, it needed to be wiggled to catch and wasn't reliable for this EVSE. The Morec 32 amp evse I bought came with a wall…

Downloads
139
Likes
20
Rating
5
P
Printablesnerdknob

Lectron - Tesla(NACS) to J1772 Charging Adapter Wall Mount

This wall mount is useful if you already have a Tesla Wall Connector or Mobile Connector setup at home and use a Lectron Tesla (NACS) to J1772 charging adapter for your other EV. It allows for convenient storage of the adapter next to…

Downloads
134
Likes
13
Rating
0
P
PrintablesPlaneGuy

Telsa J1772 Seat holder adaptor

Fits Model S, X, 3 and Y seat rails. Slides into the seat track to hold your J1772 adaptor. You need at least 1 inch of room on the seat track with the seat in the driving position. Recommended for taller drivers.

Downloads
133
Likes
25
Rating
3
P
PrintablesKerrywilkinson

Another J1772 dummy inlet

Here is a J1772 dummy inlet to plug your charging plug into when not in use. There are a few others on Thingiverse, so just choose whichever works for you :). Instructions You should probably print with at least 50% infill to handle any…

Downloads
130
Likes
11
Rating
5
P
PrintablesAlec Pfautz

J1772 Charger Holder with Extra Mounting Holes

V3 of Ken's great J1772 Charger Holder model with extra mounting holes

Downloads
128
Likes
13
Rating
5
P
PrintablesLuce

Tesla J1772 charger adapter holder for Model 3 trunk

jonco223's design for a J1772 adapter for the trunk of a model 3. All credit goes to jonco223 on thingiverse. From jonco223: Utilize one of the plastic push pin clips in the trunk to mount this holder for the charging adapter. I printed…

Downloads
126
Likes
19
Rating
0
P
PrintablesAustin Milne

J1772 Style EV Charger Dust Cap

Just a simple cap to protect your J1772 style EV charger plug from getting dirt, dust, and debris in it. Useful for keeping the plug protected when traveling with a Level 1 charger. Snap on the cap, toss the charger in your trunk, and…

Downloads
119
Likes
7
Rating
5
P
PrintablesJack Darbonne

Chargepoint Replacement Lever Latch (1772 Type B Latch Replacement)

Additionally, please use the original sping or use a replacement spring: 9mm OD, 0.8 - 1mm gauge spring! Hope this helps!

Downloads
114
Likes
7
Rating
0
P
Printablesrmeden

Tesla J1772 Adapter Trunk Holder 2020 Model Y

hiopilot@Thingiverse had an interesting idea for a J1772 holder. Previously, I kept mine in the glove box, but liked his/her idea. My 2020 Model Y doesn't have the connections he has pictured. It's sort of a diagonal vent arrangement.…

Downloads
109
Likes
40
Rating
3
P
Printablesdashdash

J1772 CCS1 EV Charger Wall Mount Holder with hex back

This is provides a wall mount holder for a J772 CCS 1 EV Charging cable. I used this video to modify the original https://www.printables.com/model/460807-j1772-ccs1-ev-charger-wall-mount-holder as I had issues with ABS prints on my MK4S…

Downloads
107
Likes
7
Rating
0
P
Printablestaco

Bolt EUV - J1772 / CCS1 Charge Handle Cover - v2

Bolt EUV J1772 / CCS1 charge handle cover. Version 2. Used to keep snow, ice, rain off he latches (on handle, in port).

Downloads
106
Likes
5
Rating
5
P
Printableslutorm

J1772 EV Charger Holder with higher lip

The original J1772 holder by Ken worked well for me, except that loops of cable hung over the top would frequently fall off as the lip is quite low. When my old one broke I decided to modify it to add a higher lip. While I was working on…

Downloads
101
Likes
9
Rating
0
P
PrintablesAustin Milne

J1772 EV Charger Dummy Socket

A dummy socket for docking your J1772 style EV charger when not in use. Say goodbye 👋 to the plug dangling on the ground and getting dust, dirt, water, and snow in it, “Click” it into this dock and save yourself the headache! Designed to…

Downloads
100
Likes
9
Rating
0
P
PrintablesLuce

Tesla J1772 Holder Adapter Remix

I took rodsmith's J1772 to Tesla Adapter Holder from Thingiverse and tweaked it. Updates include (see attached pic): Increase this face for a tighter fit and added radius for assembly. Add radius and thickened the overall width of the arm…

Downloads
95
Likes
14
Rating
3
P
PrintablesPhamtom

2022-2023 Tesla Model Y - J1772 Adapter Bottle Holder Insert

Tesla quietly changes parts sometimes. I believe this will fit 2022-2023 Model Y with carpet lined door pockets. It may fit earlier models. It may not fit 2024 Model Y starting in early spring. I printed in PETG for better temperature…

Downloads
88
Likes
20
Rating
0

OpenSourceEV DCFC + J1772 to NACS Adapter Holder for Rivian R2

OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…

Downloads
81
Likes
12
Rating
5
P
Printablessolids modeler

J1772 charge holder cable storage

Storage for J1772 EV charge cable.

Downloads
80
Likes
7
Rating
5
P
Printablestaco

Bolt EUV - J1772 / CCS1 Charge Handle Cover - v1

Modeled for the Bolt EUV charge port. Dimensions to check if your charge port is compatible: 83mm tall From the apex/top of the curve, to a bottom edge of the cover 86mm wide Edge to edge 135.088mm radian (overall curve) Purpose: Cover…

Downloads
79
Likes
6
Rating
0
P
PrintablesPeuqui

EV-Plug Wandhalter Typ J1772

Electric vehicle plug holder with weather cap. Step file included.

Downloads
68
Likes
3
Rating
0
P
Printablesmbrooker

J1772 wall mount

Two-piece wall mount for J1772 car charger plug. Inner piece can be printed in TPU for a nice soft fit, but PLA or PETG for the whole thing works.

Downloads
66
Likes
2
Rating
0
P
Printablesnivekmai

Tesla J1772 Adapter Model S (2015) Trunk Mount

A mount that clips into the trim on the back left side of the Model S trunk. Modeled to clip into the 2015 Model S, it should fit right between 2 ribs in the trim, you can feel underneath the trim to find the position. I'm not sure if…

Downloads
57
Likes
8
Rating
4
P
Printablesgamebofh

Tesla J1772 Adapter Holder

My home car charger frequently swaps between a Tesla and a Leaf, and I didn't have a good place to hold the adapter. Looking online, I didn't find a lot of options so decided to make one. I will say, if you're looking for one, this one at…

Downloads
52
Likes
4
Rating
5
P
PrintablesJeffWDH

J1772 Dust Cover

A simple dust cover to protect the J1772 end of a J1772/NACS adapter. You should print this with a heat resistant filament like PETG as the summer heat will deform this. Printed with Overture PETG.

Downloads
49
Likes
5
Rating
5
P
PrintablesLuce

J1772 to Tesla Holder Adapter

Just got my first Tesla and had a J1772 charger installed in my garage (supplied free by my local municipal utility). This adapter pops into the wand holder and allows to just pop in the Tesla adapter so I don't need a separate place to…

Downloads
49
Likes
4
Rating
0
P
PrintablesReturnZero

Tesla J1772 Adapter Cradle

Sick of your J1772 adapter knocking around in your glove box? Me too. So I designed and printed this. Seems to work pretty well, maybe you'll like it too. It's designed to be a little snug on the adapter, to hold it in place so it doesn't…

Downloads
49
Likes
2
Rating
0
P
PrintablesTodd Stansell

CCS/J1772 to NACS Adapter Caps (Rivian)

Here are some protective covers for your CCS/J1772 to NACS charging adapters. I only have access to the ones from Rivian, so that's what I've included so far. If I end up with others I'll add more or at least verify if these fit. They're…

Downloads
45
Likes
5
Rating
0
P
PrintablesGruthius

Top Mount J1772 Holder

Changed the model up a bit so I could screw it into the shelve plywood, you will need supports.

Downloads
41
Likes
5
Rating
0
P
PrintablesArtemis5010

J1772 to Tesla Charging Adapter Holder

This design serves the purpose of effectively holding the J1772 to Tesla Charging Adapter! Versions 1 and 2 can be installed using M5 screws in your garage or any other space with a drillable wall surface! Version number 3 can be…

Downloads
39
Likes
4
Rating
0
P
PrintablesPhamtom

2021-2023 Tesla Model 3 - J1772 Adapter Bottle Holder Insert

I printed in PETG to better temperature resistance. Installation instructions: Insert main body into the driver side door bottle holder. Insert spacer.

Downloads
39
Likes
7
Rating
0
P
Printablesn8

Tesla Model 3 or Y Trunk Charging Adapter J1772 Holder

I found this adapter on thingiverse and I love being able to grab my charging adapter quickly and easily right inside the driver’s side of the trunk. Plus, it required no drilling or modifications to my model Y as that triangular opening…

Downloads
37
Likes
5
Rating
0
P
Printablestiz.io

Gas Guzzler to EV Converter: Tow hitch to SAE J-1772

Does your big pickup or SUV cost too much to drive? Now you can convert it to an environmentally friendly electric vehicle with this handy adapter! Install it in your tow hitch and you too can park in those EV parking spots all day! View…

Downloads
35
Likes
3
Rating
0
P
Printablesosunick

Tesla NACS to J1772 holster adapter

Insert this adapter into the holster on your Tesla Wall Connector so you can leave the J1772 adapter on the end at all times. Useful if you have a Tesla charger but your primary EV is not a Tesla.

Downloads
32
Likes
3
Rating
5
P
PrintablesSilviu Tanase

J1772 Square base

Re-mix to a square base to match my application. Removed the cable holder. Distance between holes is 52mm. I uploaded the Step file to make it easier to change

Downloads
28
Likes
2
Rating
0
P
PrintablesFireTime

Pole mounted J1772 EV charge plug holder

A pole mounted J1772 EV charge plug holder. The design mounts to a 4' long x 1-½"⌀ pole that can be installed onto a weighted umbrella base. Permits storage of charger connector on the driveway near vehicles rather than attaching to a…

Downloads
28
Likes
6
Rating
5
P
PrintablesMurdogk

lego 3867 3811 2628 2629 15624 18922 71772 69958

lego 3867 3811 2628 2629 15624 18922 71772 69958

Downloads
28
Likes
3
Rating
0
P
PrintablesDorbiman

Lectron CCS + J1772 to NACS Adapter Holder

This model was designed for CCS + J1772 adapters. Perfect fit for Lectron Vortex and the Lectron 48A Level 2 adapter (Tesla (NACS) to J1772 EV Adapter | 240V | 48 Amp). Designed for PETG for better durability in hot environments.

Downloads
26
Likes
4
Rating
0
P
Printablesmindedc

Tokreal Tesla to J1772 Adapter Mount

This is a wall mount to hold the Tokreal Tesla/NACS to J1772 adapter as available on amazon. At the time of this writing it's the cheapest adapter I could find and the quality seems to be quite good. I mounted mine on an angle like a…

Downloads
23
Likes
2
Rating
0
P
Printablesdradam

180 degree Pivoting J1772 wall mounted charger holder

Swinging J1772 bracket that allows you to lay the charger flat against the wall and swing it out as needed. Printed in PET 40 % but may go higher depending on longevity. Prints in place as one object. A little crunchy in the joint as the…

Downloads
22
Likes
4
Rating
0
P
Printablesqster.102

Dummy socket for J1772 plugs With rain cover

This is a remix of Austin Milne's j1772 dummy socket a rain cover was added and a non screw option was also added. It is used to hold a charger while it is not charging the car.

Downloads
19
Likes
2
Rating
0
P

J1772 Plug Holder

This model lets you unplug your EV's J1772 charger and store it on the wall of your garage. No hooks, no dangling cables – this model takes advantage of the J-type plug's attachment mechanism. Use three screws to attach to a wall – I used…

Downloads
18
Likes
0
Rating
0
P
PrintablesCruisechef

EV Charger J1772 Charger Mount Plate

I am currently living in an apartment and charging in my garage. I don't want to put holes in the wall so I came up with this. I canibalized the plate and charger port from a couple existing models. Supports required. Enjoy

Downloads
18
Likes
3
Rating
0
P
Printablesdradam

Rivian Center console Nacs Adaptor holder Mashup DCFC and A2Z Stellar j1772 plug.

Rarely used Nacs adaptors were taking up valuable real estate in my driver door compartment so with this mash up they are now neatly stored in my center console as part of the supports for my printed shelf system.

Downloads
14
Likes
2
Rating
0
P
PrintablesFilamental

CCS and J1772 adapter caddy for Chevy Bolt EUV armrest cubby (2023 and similar)

There is no convenient storage location in the Bolt EUV for the two separate charging adapters needed to use NACS level 2 and DC Fast Chargers, so this caddy fills the need. It uses plug holder sockets designed by Dorbiman in a block that…

Downloads
14
Likes
3
Rating
0
P
PrintablesBobStrogg

J1772 Plug Collar

Some J1772 plugs have a plastic collar that holds the rubber gasket in place. Over time this can weaken and fall out. This is a replacement collar with more robust side clips to keep it in place. Print in PETG for best results No supports…

Downloads
14
Likes
0
Rating
0
P
Printablesmr.jadkowski

J1772 Adapter Holder

I needed a way to store this J1772 (car) -NACS (charger) charging adapter in my garage so I drew this up. I have a simple adapter that doesn't have a latch on the J1772 end, so it may not work with an adapter with a latch. It fits the…

Downloads
12
Likes
1
Rating
0
P
Printablesrajivvishwa

EcoFlow EV X-Stream Adapter J1772 CCS Cover

Designed as a protective cap for the Delta Pro 3/Ultra adapter used with an EV charger, covering the connector. Printed with 30% rectilinear infill and three wall loops Requires support material under the integrated locking mechanism…

Downloads
11
Likes
2
Rating
0
P
PrintablesDaveP

J1772 Hyundai EV Charger Holder

The original model is a really nice design, but it didn't quite work well for the Hyundai J1772 charger. I made a few small tweaks to the original design to make it easier to unlatch the charger, and to hold the charger in further. Also,…

Downloads
11
Likes
2
Rating
0
P
PrintablesWiggeli

Varta Stirnlampe 17720: Reparatur des Ein-/Ausschalters

Dieses Teil ersetzt das Gummiteil, das den Ein-/Ausschalter der Stirnlampe bedient. Das dreieckige Originalteil wird abgeschnitten. Ich habe den kleinen Stempel des neuen Teils nach dem Druck mit der Nagelschere noch um etwa 0,8 mm…

Downloads
11
Likes
0
Rating
0
P
PrintablesHilbe

Rubbermaid Fasttrack J1772 Mount

This is a J1772 mount that will attach to the Rubbermaid Fasttrack system.

Downloads
10
Likes
2
Rating
0
P
PrintablesDr. Walder

GM EV Level#1 J1772 Charger holder and cable orginizer

There are 2 brackets to hold the garger by holding IN/OUT cablel. Such simple design providest the most efficient cooling. The cable orginizer and J1772 holder can be used for any charger with 13mm cable. There are 2 versions, one for my…

Downloads
8
Likes
1
Rating
0
P
PrintablesKnaj / AJK910

J1772 Connector Icon

Just a simple cutout of the J1772 connector for use on signs or whatever you please. I modified the SVG from Wikipedia to be printer friendly with this STL. Personally using this to make signs to identify electric chargers at my…

Downloads
6
Likes
0
Rating
0
P
PrintablesPurplePLA

Remixed EV Charger Holder J1772 for smaller build plates

A very very simple remix of Jerrari's EV Charger Holder J1772, to remove a few mm of size so that it will fit in 120mm^3. Will need to be diagonal on the build plate, no supports needed. Please refer to the original for all other details…

Downloads
6
Likes
0
Rating
0
P
PrintablesShawneeCreek

ChargePoint Home Retention Clip - J1772

Replacement retention clip for the ChargePoint Home EV charger connector. Re-use the original spring. Press out the hinge pin to install. I used a punch and hammer. Then press the hinge pin back in. Print settings that I used: PETG…

Downloads
3
Likes
3
Rating
0
P
PrintablesIsenAg

Wide-Spacing Remix: DCFC + J1772 to NACS Adapter Holder for Rivian R2 (A2Z fit)

Remix credit This is a remix of "OpenSourceEV DCFC + J1772 to NACS Adapter Holder for Rivian R2" (OCL v1.1) by Rob @OpenSourceEV: https://www.printables.com/model/1876474-opensourceev-dcfc-j1772-to-nacs-adapter-holder-for All credit for…

Downloads
1
Likes
0
Rating
0
P
Printables

Lectron CCS + J1772 to NACS Adapter Holder

This model was designed for CCS + J1772 adapters. Perfect fit for Lectron Vortex and the Lectron 48A Level 2 adapter (Tesla (NACS) to J1772 EV Adapter | 240V | 48 Amp). Designed for PETG for better durability in hot environments.

P
Printables

Dummy socket for J1772 plugs With rain cover

This is a remix of Austin Milne's j1772 dummy socket a rain cover was added and a non screw option was also added. It is used to hold a charger while it is not charging the car.

P
Printables

Tesla J1772 Adapter Model S (2015) Trunk Mount

A mount that clips into the trim on the back left side of the Model S trunk. Modeled to clip into the 2015 Model S, it should fit right between 2 ribs in the trim, you can feel underneath the trim to find the position. I'm not sure if…

P
Printables

J1772 Charger Holder with Extra Mounting Holes

V3 of Ken's great J1772 Charger Holder model with extra mounting holes

P
PrintablesHuskyCo3D

J1772 adapter holder

A holder for your J1772 adapter. I designed this for my Volvo XC60 recharge. Print in PETG, ASA, or ABS, if you want to mount it outdoors.

Likes
3
Rating
0