182 models
Ich fand das tolle Design von FrankBer sehr nützlich und habe es an meinem neuen Kompressor DMP181Z getestet. Auch an diesem Gerät funktioniert es einwandfrei. Ich habe das Design ohne Schlauchschelle modifiziert, da am DMP181Z bereits…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
Wall mount for string trimmer Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Yes Supports: Doesn't Matter Resolution: 0,4 Infill: 20% Filament: prusament pla, petg Category: Tool Holders & Boxes
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
Part of the front suspension broke - here a spare part. FreeCAD file included
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
Eine Wand Halterung für den Makita Akku-Rasentrimmer DUR181 . Präsentiere stolz deine maßgefertigte Wandhalterung für den Makita Akku-Rasentrimmer DUR181! Diese elegante Halterung wurde mit PETG-Material gedruckt und verfügt über eine…
This solves for the odd annoying geometry of this charger so you can mount it to the wall, like most of the other chargers allow. It sits nicely without any kind of adhesive but if you want a more secure solution, double sided tape or hot…
Wallmount for Makita DJV181 Jigsaw
This part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting a GPS module on a SpeedyBee Mario 5 frame. If anyone knows what filament SpeedyBee actually uses for their yellow parts please…
Hey FPV Guys, it's a ugly quick'n'dirty combination of different Things. For the Speedybee Mario5 Frame: - WS Dual Antenna - XT60 Mountable Plug Connector - WS M181 GPS Print with TPU Infill 15% and Organic support
This component allows using water bottles / carbonated soft drink bottles to build homemade filters. The threads on this design were created using information from this specification . Overview There are 2 common standards for plastic…
A switch compatible with / comparable to LGB R5 (18050 / 18150). These only work when your running live steam or battery operated locomotives ;-)
Here' a fully configurable hook wrench similar to DIN 1810 Form A . Form B would have a pin as a hook and is not contained, but Form A is ideal for 3D printing . This time the difficulty of the part needed me to use Onshape. Unlike the…
a seal is needed for the pet bottle, I use the pet bottle, which serves as a pressure vessel, keeps the pressure up to about 4BAR na pet lahev je třeba těsnění, použávám k pet lahvi, která slouří jako tlaková nádoba, udrží tlak do cca 4BAR
Printed with PETG an 60% infill
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED Sep 21, 2024] Added a smaller variant, for…
Print Settings Printer brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament material: TPU Filament brand: Kingroon
US Navy Cutlass, as wielded during the war of 1812. https://www.history.navy.mil/research/library/online-reading-room/title-list-alphabetically/u/uniforms-usnavy/swords.html…
Replaces the stock GPS mount that comes with the Bee35 frame for use with the BZ-181 GPS module.
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…
Network Switch Rack Ears for mounting a network switch into a 19" rack. Compatible with the HP1810 series. Optional cable management side pass through hole version included. Print Settings Printer: Kossel Mini Supports: Yes Resolution:…
Version 2.0 now ready for download. The charging unit now snaps in preventing the unit from falling out. This is a Makita Battery Charging Stand that tilts the charger at a more user friendly angle. It was designed for the 48-59-1812…
This design allows you to wall mount your Lego Star Wars UCS Y-Wing horizontally or vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how dialed…
I needed a new splinter guard and found some designs that did not quite fit. I also added an orientation arrow that can be seen from above. Fusion file is also added with variables to adjust. got inspired by this moddel:…
Here's a remix of Ampharos by 3Dprint1UPu. I've painted it, enjoy! mmu3 compatible
An Ikea Skadis mount for the Ryobi One+ IntelliPort Battery Charger (RC18115)
There are 2 funnels here one small and one bigger. I needed a way to refill bottles with one hand so this twist on with half a turn and is extremely sturdy. it is also stepped to be able to go over the other rings of the bottle. works on…
My SpeedyBee Bee35 came with a GPS mount TPU part for a smaller (I think 121) GPS module. I needed something slightly bigger, that also fits the specific connector geometry of the Walksnail WS-M181 GPS and compass module. In addition, I…
Ever since I got my Studio 1810C, I have been looking for a way to mount it underneath my desk riser. Because of the curved outer edge, using an off-the-shelf generic bracket system just will not cut it. This was my primary reason for…
SpeedyBee Master 3X XT60 with WS-181 mount for: - XT60EW-M ( aliexpress ) - GPS Walksnail WS-M181 GPS TPU printed
Originally posted on Thingiverse: https://www.thingiverse.com/thing:6445540 Low poly turtle creature, uses standard US bottle cap for the shell. Cap screws/unscrews to serve as storage space for small items. I created a small video…
Staubsauger Adapter passend für Makita DJV 181 und andere Modelle. Für Schläuche mit einem Innendurchmesser von 35mm. 0,2mm größer und mit TPU gdruckt für einen besseren halt, bei anderen Filamenten muss eventuel etwas angepasst werden.…
I needed a way to mount a Walksnail WS-M181 to the top of a printed Titan Micro Talon. I couldn't think of anything flashy so I just came up with a little box the gps can fit into. I used hot glue to secure the gps to the mount, and…
Geprc / Phisital mark5 BZGNSS BZ-181 GPS mount. Press-fit mounting, made with zero tolerance. Print in PLA only. Tested in free flight and freestyle. Nothing falls out, it holds tight.
Ariadne on the Panther: https://liebieghaus.de/en/renaissance-bis-klassizismus/ariadne-panther Scanned in Frankfurt, Germany at the Liebieghaus Sculpture Collection, July 2024. Print-ready version of a 3D scan from Sketchfab . See how I…
I needed a depth measuring bridge for my Mitutoyo (500-181-30 CD-15APX) caliper. Because the original one is expensive I design my own. There are a lot of bridges out there to print, but I wanted a design which is adjusting the caliper to…
This cable holder replaces the BMW OEM clip 33 18 1 181 218 (33181181218). It routes and secures wiring on the suspension—typically the brake pad wear sensor at the rear, and in some models also ABS/signal wires—so cables don’t chafe or…
Castle / Vanishing Trunk Tray-packing puzzle by Stewart Coffin (STC #181-A & #181-B) Several puzzles in one: fit all five pieces into each of the three openings. Two of the openings are house-shaped but with an extra protrusion, either at…
A simple battery cover for the MITUTOYO 500-181-30 Digimatic as I haven't found one online. This is for the calipers without the scrolling wheel. Printed in PLA, 0.1 layer hight. Fits like a glove for me, but a bit fragile in the small…
To convert my iMac Late 5K 2014 into a 5K monitor I used a Stonetasking R1811 driver board. Most of instructions here can be applied to other iMacs and other driver boards as well. Note, that my particular iMac is one with a factory VESA…
Geprc / Phisital mark5 BZGNSS BZ-181 GPS mount TPU ver1, ver2. Printed in TPU 95A.
Printed with ABS, 15% infill Category: Tool Holders & Boxes
This is a mount for the BZ-181 BZGNSS to attach to the arms using a zip tie No support needed, print with “ears” to the plate. Print in TPU.
This is a sturdy Multiboard mounting bracket for a Ryobi single battery charger (model BCL14181H). The battery charger has mounting holes 105mm apart and the posts on this model, although small, are just about strong enough to hold it if…
This model is compatible with the lego system.
Hard to get this guard these days. Works as per the original. This one is printed in PLA as it's a prototype, but I'd recommend printing it in somthing more robust. When/if this breaks I'll print it again in Nylon/CF. Includes integrated…
This mount is to be used in a 25x25 pattern, holds the BZ-181 GPS from BZGNSS. Print in TPU, no supports needed. Orient it as in the picture “ears” against the printing plate.
The Bosch RA1181 router table does not come with a miter gauge so this solves that problem. This design includes 2 sliders: one with a detent for 15 degree increments, and one with out a detent to allow for any angle to be set. The main…
Hey everyone, i designed this ring for the Feiyutech AK2000S but it should fit other follow focus gear as well. It has been specifically been designed for a print in TPU to slide the ring without damage over the Sony SEL 18105G lens. Be…
Holder Makita Jigsaw (Halter Makita Stichsäge) DJV181
This model is compatible with the lego system.
My OEM fences would swell up from the year-round humidity, so instead of buying replacements, I designed these. Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: No Resolution: 0.15 Infill: Any Filament: Any Any Any…
This part helps to convert your old iMac to 5K Display. How to do it is here https://github.com/jorycz/iMac-5K-display-convert This part is R1811 Driver Board Holder with Pads. Print it using PETG because of slightly higher temperature…
This model is compatible with the lego system.
A0029880181 Clip für den Daimer, gedruckt in PETG oder PLA, ca 15 min.
Este es mi remix juntando el tapón Din61 y la rosca de botella PET para enroscar mi sistema de riego por goteo a batería para la terraza "Jardibric summer kit" a un depósito de 20L La rosca de botella PET ha funcionado a la perfección,…
Attaches the RC18115 to Multiboard with 4 screws (You will need 4 - actually 2 might hold just fine - of those: https://thangs.com/designer/Multiboard/3d-model/13%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-974236). I printed it…
Housing Project Tray-packing puzzle by Stewart Coffin (STC #181-C) Two puzzles in one: it all five pieces into each of the two house-shaped openings. They look similar, but the solutions are quite different! Housing Project is one of a…
This is an osVAC neo M25 adapter for the Makita DJV182 pendulum jigsaw. Should also fit the DJV181. I am using a 20mm Mirka hose with this osVAC neo F25-H20 adapter to connect it to my vacuum. Works flawlessly! Take a look at the…
This object was made in Tinkercad for modeling purposes.
Bonjour tout le monde, voici un support mural que j'ai designé pour maintenir en place le vaisseau LT81 de chez LEGO (Heavy Spaceship LT81 42181) Il suffit de mettre en place 2 pin supplémentaire comme indiqué en photo le vaisseau tien…
I mounted the Bosch RA1181 router table on my table saw and mounted a Triton router to it. I wanted a simple place to put the accessories (extra router plate inserts, spanner, lift arm, extra collet) and cord management so that they're…
Wall mount for grass string trimmer.
Many of the 32181 shock absorbers have a cap that fails over time, rendering the part useless. This part allows it to be repaired and used again. Print with supports (suggested model orientation in photos).
This is a bracket for the HiLetgo 3-01-1810-5V 30A relay module that is designed to be attached to the electronics_DIN_rail_generic_mount.stl model here:…
A compact, custom rear mount for the Speedybee Master 5 v2 to house a DJI O3 Air Unit antennae and the Walksnail WS-M181 GPS unit. Printed on/using: Creality K1 https://amzn.to/4fKh0ph Overture Electrical Blue TPU https://amzn.to/4c9XgIp…
A little box to reuse PCO1810 caps (soda bottles cap). Only 1.6 grs of plastic about 0.5m. Print in vase mode in less than 10 minutes.
Table holder for Denon remote RC-1181 Print Settings Printer: Anycubic i3 Mega Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 20% Category: Audio
Designed a small Lightweight GPS mount for the Walksnail WS-M181GPS 10th gen GPS module for FPV Drones. For reference the exact model I purchased from the Caddx website: https://caddxfpv.com/products/walksnail-ws-m181gps This fits on the…
it fits well, i didnt put mini feet as the original one for an easiest print.
Cossack of the Life Guards, 1812–1814
Thanks to the great work of steffanders , I was able to design a configurable bottle with a PET closure. The height and diameter of the bottle can be adjusted. I have created three example bottles, and more bottles can be created through…
Made a circular template for my Makita DJV181 for cutting out holes in dimensions 100,125,160,200,260 and 300mm.
This part helps to convert your old iMac to 5K Display. How to do it is here https://github.com/jorycz/iMac-5K-display-convert This part is Case for R1811 Control Strip where is status led, IR port and control buttons. Can be printed…
Cavalryman of the 1st Regiment of the Imperial Guard of Honor, 1813
Printed in PLA with 20% infill
A small shelf designed to fit the angled front wall of a KZ181 Camper Trailer. It may fit other with an angled front wall. The angle from vertical is 25 degrees. The shelf has a small lip, with a flat surface 204mmx94mm. There are no…
I recommend printing with supports, but using a support blocker to only support the mouth of the dinosaur. Low poly dinosaur, uses standard US bottle cap for the shell. Cap screws/unscrews to server as storage space for small items. I…
Slide in GPS from the Top
Replacement for A1697420181 used in Mercedes Benz Viano / Vito. The advantage over the original part is that you can easily scale this model to fit into corroded and other wise enlarged stock holes. Ideally print in TPU since the part is…
I modified this model to fit Synology D8 (1813+ etc) drive bays. I initially printed the original model thinking it would fit but it didn't, one exacto knife cut later and it fits! so I quickly modified it in Prusaslicer and boom! new…
Staff Officer of the Black Sea Cossack Cavalry, 1814
This is a replica of a classic figure from the Elan Merchandise Lord of the Rings line, "Saruman's Forces" pack number 1812. Heritage Miniatures manufactured these figures for Elan, who held the LotR license at the time. The figures have…
Part Number: 10018164 (Bosch / Siemens) Product Type: Transmission Gear (Main Drive Gear) with integrated coupling. Function: This gear transmits power from the motor to the worm gear (screw) of the meat grinder. It is designed as a…
Adaptateur fixation chargeur Ryobi BCL14181H permettant de le fixer dans l'autre sens avec le cable en sortie basse et les voyants vers le haut Fixation avec 2 Vis M4*10 Je me suis basé sur le fichier Ryobi RC18120 Charger Holder de…
HELLA 181 FOGLIGHT COVERS - ROUGH FIRST VERSION, WILL UPDATE AS REFINED AND OTHER EDITS, MAY ASWELL SHARE WHILE I WORK. BASCIASLLY A RESKIN OF THE ORIGINAL, WITH NCC LOGO, HELLA VERSION COMING They do fit, could be refined to be perfect
Transition from BEKO VRT 61814 VR vacuum cleaner to round. Diameter of circular end is for electrolux tips. Check your diameters before print.
Mark4 GPS (cyclone 181) upper mount for any kind of mark4. For examle it can also on 13inch drone ) Filament: TPU 95A
📄 Description This is a custom-designed mount for the BZ-181 GPS module , made specifically for the FlyFishRC Volador II 5-inch frame. The mount provides a secure fit and keeps wiring tidy, while maintaining a lightweight and durable…
Staff officer of the Ufa Infantry regiment,1814
This is a replica of a classic figure from the Elan Merchandise Lord of the Rings line, "Saruman's Forces Half Orc Archers" pack number 1814 (sold as part of 1816). Heritage Miniatures manufactured these figures for Elan, who held the…
This is a replica of a classic figure from the Elan Merchandise Lord of the Rings line, "Saruman's Forces" pack number 1813. Heritage Miniatures manufactured these figures for Elan, who held the LotR license at the time. The figures have…
114mm Travel Telescope: https://www.printables.com/model/1038495-travel-telescope-114mm-updated-version/ Hardware required: 4x M4 heated inserts to be inserted via the back of the model (where the champers are). I believe I used 4mm…
Simple wall mount for Makita DJV181 jigsaw. A bit of a loose fit. Your printer's default settings should be fine. Printed in Elegoo PLA+, 0.2 mm layer height, 2 wall loops, 15% infill.
These simple fittings were created to build a flexible framework that would hold fabric and scales for the neck of a large dragon puppet. I needed the framework to come apart if needed to access the inner mechanism for repairs or…
Pièce de réparation pour le vérin transparent Lego. Lorsque le ressort n'est plus retenu, le vérin de fait plus son effet de rappel lent.
Spare leg for HP keyboard PN 803181
This is a remix of lachtan86's original dual antenna GPS mount modified to fit the Walksnail WS-M181 GPS Module
Needed to swap the doors from my fridge Bomann KG181 (opening on the right side instead of left). Everything was designed so it could be swapped with some reconfiguration but the lower hinge for the door was not designed to work on both…
![#0181 Nautilus 2 Rotating Caddy [2 Variants]](https://media.printables.com/media/prints/962699/images/7772480_aed874a0-8e59-4082-aa40-22364583e4ac_452d0fb7-a734-499a-b576-6802986d5fbc/rl-20240929-003.jpg)
