Counting matching models…
This is my take on a crawler teeter totter, using no nuts or bolts, just a bit of CA glue (superglue) or other glue you have that connects printed parts together. All you need to do is print 5 parts, and glue 2 of them together any you're…
Some whoops that can be made as long or short as you want them to be. The ends are reversible, and you can add as many middle sections between them as you need. They have holes to add the connectors in to help keep the pieces from moving…
This is the customizable bridge for 1/18th and 1/24th scale crawlers, like the TRX4M and SCX24. There are 3 bridge support sizes, 50mm,100mm, and 150mm. Each bridge support comes in 2 variants, flared base, and stackable. The stackable…
This is a set of small bridge "planks" that can be printed to make a bridge any size you want. All of the planks are wide enough for a 1/18th scale crawler and smaller. They have a 4mm passthrough hole for the "rope" sized to fit standard…
The rear speakers were blown in my car. They're an odd size, and not easy to directly replace. I found there's a bracket, SAK-1203 to mount 5.25" speakers in the rear without modifying the car. Those adapters aren't easily available in…
I modeled this for my wife who wanted a way of displaying the Quill Pen that we purchased a souvenir after watching Hamilton on stage for the first time. Since it is a quill pen, I thought it only right to use an Inkwell for holding said…
I was tired because my Ryobi Cordless Router could not hang just like my other Ryobi tools. Then I found the Ryobi RLYARD Lanyard, which was only a half solution. Then there is only one solution, print a new top for RLYARD. It works with…
Dust collection for Ryobi Router (R18TR) to use with vacuum hose equipped with 45mm connectors. Tested with 45mm hose from DeWalt DXVCS002 Cyclone Dust Collector. If you want to use it with home 35mm vacuum then you can try using Vacuum…
only requires four self-drilling screws easy to print on the small printers too! HAVE FUN!
Fontaine Renegade-Magnitude Trailer - 1:18th Scale Uses M4, M2, and M1 Screws Uses two 6.4mm (0.25in) x 120mm (4.75in) Rod for axles Need to make 24 Outrigger Parts
Transcraft Eagle Stepdeck Trailer - 1:18th Scale Uses M2 screws Uses two 6.4mm (0.25in) x 120mm (4.75in) Rod for axles Included in file are alternate tool boxes with diamond plate façade. Larger parts divided to fit on 400mm x 400mm print…
House inspired by house seen in Jewish ghetto in Trebic town in Czechia. Similar houses appeared all over Central Europe, from Germany to Poland. It is modelled based on 19th century look, but it can work both for earlier and later time -…
Easy to print and put together. PLS DOWNLOAD and LIKE! THANK YOU FOR SUPPORTING ME IN MY ADVENTURE OF 3D MODELING! MRC.
Ported the model from @acheparev to the osVAC environment. Unfortunately i only had the stl file. If i have more time i redesign it from the scratch. Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/…
Um mit einer Oberfräse Kreise, Halbkreise o.ä. fräsen zu können braucht es eine stabile Führung. Die Führungsschiene ist zweiteilig, so dass man das Werkzeug nach der Montage ansetzen kann. Das reduziert das Risiko einer Verletzung. Die…
Thanks to the original creator for providing a Fusion and STEP file so I easily could redesign this. Remixed to fit 44 mm hose for the Biltema vacuum . Just remove the normal end piece of the hose and this fits right in.
Very sturdy bike mount for Ulefone Power Armor 18/19 (T) phones. Totally solid, will not move or vibrate under any conditions. You only need an O-ring for clossing mechanism and optionally heat set nut inserts.
Replacement wing for Haiboxing 1/18th scale rc car, truck thing
This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames,…
Easy to print 2 files. Glue together the pieces. THANK YOU! MRC.
During the Napoleonic Wars, British Army officers wore gorgets as a metal, crescent-shaped badge of rank suspended from the neck, symbolizing "on duty" status rather than providing protection. These items, typically made of gilt brass,…
this is a fridge is great for if you are going to make a overland set up for your mini rig! ENJOY! PLS DOWNLOAD TO HELP MY PROFILE GROW. THANKS!!
Modeled from an existing one that broke.
This is a copy of the kawasaki ninja 300 swingarm cap 11065-0748-18T. Use sandpaper to give it a nice smooth finish and paint as you like. I used fs black from rsbikepaint. Prints in 2 and a half hours, 0.4 nozzle, 0.12 resolution, 50…
A model of an 18th century french chanteaux I made in tinkercad.
Jde o náhradní kolík na ventil pro kamna MORA 218T včetně krytky české výroby. Kolík ve formátu .3mf je dvoubarevný. It is a spare pin for the valve for the MORA 218T stove, including a cap made in the Czech Republic. spare pin is in .3mf…
This is a servo arm for the 18th Scale OpenRC F1. It fits on the 3,7g cheap ebay servos. I used my soldering iron to quickly melt the inside of the hole and quickly pushed the servo arm onto the servo to get the teeth marks inside. After…
Product Compatibility Machine Model: Singer 717 School (Scholastic) Replaces Part Numbers: #163997 (Vertical) & #163329 (Horizontal) Specifications Type: Spiral Miter Gear (Bevel) Teeth: 18T Ratio: 1:1 OD: 24mm Vertical Gear ID: 15.5mm…
18T MXL Pulley for 4mm shaft Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options:…
This model is perfect for any cake. It can be customised and fitted to any size cake. The design is uniform and designed to be scaled up and down to fit all cake sizes. Print with a 0.2 layer height. It can easily be sprayed painted, as…
Printed in Elegoo PETG - CF / Main Bed, Gooseneck, Backend, Wheels, Test Block Elegoo TPU 95A / Tiers, Mudflaps Elegoo Rapid PETG / Everything else Hardware 6 2M x 6mm bolts to attach the mudflaps 2 2M x 20mm bolts to attach the rollers…
Testing out some experimental parts for the 18th Scale OpenRC F1. These parts are not yet intended for general use. The may not work properly or even print properly. Use them at your own risk. Category: Vehicles
The smallsword is the concealed carry weapon of the Victorian era. It had a short, triangular blade that was used only for thrusting. Originating in France, it spread quickly across Europe and became both the standard gentleman's carry,…
Did a quick design of some shock spacers in various sizes. 2mm, 4mm, 6mm, and 8mm.
18th Birthday Cake Topper 🎉🎂 Celebrate the big milestone in style with this sleek "18" cake topper – perfect for birthdays, debut parties, or any sweet eighteenth celebration! Designed to sit beautifully atop cakes, this topper adds a…
Print the main body with support. The assembly is a bit tight, use some tweezers if needed. The Mainbody is connected to the blaseplate with M4 screws with hexagon sockets. I used this LED-lights:…
18th Level Birthday Cake Topper
A simple traffic cone for an RC track or toy set.
You can print it with minimum supports.
Broke one when the RC18T went out of control. Ive created several out of PETG and ABS-CF.
Ulefone Armor 18t USB Dust plug
Ive made a few using just simple shapes i think this is still a bit odd looking yet durable i hope i post file correctly i have only tested this in pla so the fitment is correct but unsure how well its truly going to hold up in a crash…
Celebrate an 18th birthday in retro gaming style! This set includes 4 different pixel art designs for cake toppers: "Press START", "LEVEL", "GAME OVER", and "LEVEL UP". The model is optimized for multicolor printing
CONCEPT PREVIEW, NOT A FUNCTIONAL OR PRINT-READY GEAR. An 18-tooth bevel gear for an RC car differential side gear, built from the Playground's /gear bevel command plus a body, a tooth-free front land, a 5.25 mm bore and a 9 x 2.9 mm rear…
This is an untested design study, not a proven print. Fit, clearances, tolerances and print behaviour have not been checked on a real printer, and nothing here promises that printed parts turn by hand. Treat the geometry as a starting…
Easy to print and put together. PLS DOWNLOAD and LIKE! THANK YOU FOR SUPPORTING ME IN MY ADVENTURE OF 3D MODELING! MRC.
This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames,…
Celebrate an 18th birthday in retro gaming style! This set includes 4 different pixel art designs for cake toppers: "Press START", "LEVEL", "GAME OVER", and "LEVEL UP". The model is optimized for multicolor printing
Make sure you do a layer pause on the handle so you can drop in the M4 nut. This is pretty close to the Ryobi green if you want that “authentic” look. https://www.amazon.com.au/OVERTURE-Filament-Cardboard-Dimensional-Accuracy/dp/B0CQ29VNJH
Catholic High Mass 18th Century Censer Cross at Top is removable cap.
Cake topper created for someone's 18th birthday. Model size is ~215x140x2mm but can be resized in your slicer. Prints perfect in PLA, and i usually use 100% infill since it's only 2mm thick. You can fit 2 pieces on one Prusa Plate Should…
Somewhere safe was needed to keep the fence & spare collet so I came up with this.
I couldn't find anything for tires for 1/18th scale RC cars so I took a picture and rendered a 3d model off the orginal tires. Do with them what you please, if you modify them just share it for everyone if you can. I like to see what…
A larger battery doesn't fit into the chassis and “stands on edge” on the rim. This part raises the floor to the rim level so the battery can be mounted on a flat surface. Push a reusable cable tie e.g. “Workzone 250x7.5mm” through the…
Decorative shoe buckles, meant to be attached to existing shoes to give them an 18th century aristocratic French Revolution vibe. Works well when attached to an elastic band worn around the shoe. You can also stitch them directly to the…
Abstandshalter für Xray M18 Truck 8mm im Durchmesser und 8mm hoch. Die Höhe kann auch im Slicer angepasst werden. Die Spacer werden über den gespannten Federn der Stoßdämpfer plaziert.
