Counting matching models…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
RAK19007 WisBlock Base Board mount with 4mm mounting holes that fits an electronics base board with a 5mm grid spacing.
required equipment power switch of your choice 10000mAh battery gps module ipex to sma connector/wire "soldering/heat shrink m2.5 x 4mm bolts for mounting switch otherwise its the same as the original.
I remixed the excellent Rugged Box to hold my mobile, temporary installation Meshtastic box. It currently holds 2x 18650 batteries in parallel and has space for 4 magnets so you can stick it to a steel surface. The plate is modeled for a…
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…
v2 Update : A little bit slimmer profile, and some model flaw fixes. Designed as a small profile mount for the Wisblock RAK19007 board from RAKWireless. This will allow it to be screwed to a basic enclosure grid mount found in a lot of…
RWE (Rugged WisBlock Enclosure) is a remix of the open-source ruggedized T-Beam enclosure, now for the RAK19007 WisBlock base board with RAK4631 (LoRa) and RAK12500/1910 (GNSS/GPS) modules. This induces a couple important build and…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
UPDATE: Added a top antenna version. Commercial Use and Attribution Notice: Alley Chat DroNode © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling…
Mounting plate for a RAK Wireless 19007 base board, using M3 screws
Summary This is a case for RAKwireless RAK19007 and RAK5005 base boards with an N-type antenna. My goal was to create a thinner case to accommodate an N-type antenna connector. The current design works but could be improved, for example a…
This mounting plate allows you to mount a RAK19007 board to an enclosure with the commonly found mesh plate as seen here: https://a.co/d/iQgPNPy . Use M3 or #6 size screws for mounting to the enclosure. For the board itself, the screws…
This is a simple case for the rakwireless RAK19003 Mini Base Board to, in combination with the RAK4631 or RAK113100 Core Modules, create a very simple USB connected Meshtastic node. My goal here was to create the most minimalist case I…
This is meant to be a stationary node, not a portable handheld device. It features: compartment for up to 4x 18650 lithium-ion cells (long enough to accommodate protected cells) M2.5 mount points for RAK19007 or RAK19003 base board M2…
Adapter mount to install RAK Wireless 19003 mini baseboard to enclosure with 5mm grid hole pattern. Also includes adapter for 2000mah flat pack battery and Waveshare solar controller (D version). The onboard solar charging on the RAK…
This is a water resistant enclosure for RAK19007 Wisblock. Its powered by a user removable 18650 battery. This case aims on modularity, the core module where the radio is mounted, is removable and can be mounted on different appliances.…
IMPORTANT: The panels are difficult to source so I don't recommend using this model anymore unless you can find the exact panel. I have a new version in the works with a more reliable supplier. My goal was to create a durable solar…
Modifications to fit a physically largery battery
Use these magnets to fit it in the lid to attach to an iPhone or Android phone with a magnetic ring attached.
A minimalistic, zero protruding elements, pocketable, lightweight case for the Meshtastic RAK Wireless 19007. The objective for this case: it should be pocketable and not have any protruding antennas, second it should be compact and…
This is a weatherproof (or waterproof depending on the version) case for a RAK19003 based Meshtatic node. Since the RAK19003 includes a Li-ion charging circuit and solar panel input port, the cases have room for a 2000mAh Li-ion battery…
New added some new rev files that should allow for stacking of support electronics using standoffs between layers, and slimmer rak 3401 mount and a clip to hold the antenna on tight. 4/26/26 Mounting brackets for electrical enclosures…
A simple mounting plate for a WisBlock Base (RAK19007) inside a Unify Enclosure. Fusion 360 File included. Category: Electronics
Model available on TinkerCad https://www.tinkercad.com/things/dUaTiFHWh74
This page and the models are a work in progress, I have some other versions of the models I'd like to add and there are some details I'd like to add to this page. To-Do List Add file name explanations Add BOMs for various versions Add…
Here is a case for a RAK 19007 Meshtastic device. Includes solar charging, a GPS set to an ideal angle, 18650 holder, dot matrix for node ID, rails and holes for modular mounting options, and a side-located antenna to protect it and keep…
RAK Wireless 19003 Bracket Outdoor Enclosure meshtastic
This is still a work in progress, planning to make versions with dedicated mounting options and higher water resistance. This is an enclosure/case for the rak wisblock 19007 module, a 16340 button top battery, and n-female fitting.…
There are many much cheaper options out there , this fulfills my personal LARP needs. At it's core, this is basically a greebled rectangle. Fits in most pouches that can hold a MPU5, Streamcaster, AN/PRC152, etc. Has survived a couple of…
I really like the enclosures from @AlleyCat so I made a version for the RAK19003. The Bluetooth antenna is attached to the side. To mount the board and the switch, you’ll need short screws, or you can use the printed screw washers and use…
I lost my brackets for mouting this switch in a rack, so I made my own since the other on Thingiverse didn't fit my holes. Use M3 8mm to mount them in the Switch. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK3…
I heard this statement and felt it would go perfectly with the Oregon Trail wagon on my desk. I also included a basic stand for the print. PRINT DETAILS Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The…
Mounts for components commonly used in Meshtastic outdoor installations utilizing a weatherproof box. These mounts are for: RAK19007 WisBlock Board Raspberry Pi 4 Heltec v3 coming soon. They are meant to be used with a box which uses a…
My mom has a 100 year old hair comb that she loves, but it's made of celluloid and that means its useful life is limited. This is my attempt to recreate the same shape and style of comb using 3d printing. To get the same shape as the…
This is the Model KC housing I designed for the RAK 19007, as well as a charging dock, which is intended for quick transport, deployment, and recharging from a hard shell case. It was created with SAR use in mind, so it has the following…
I have a Makita 1900B Power Planer that is 30 years old, it's hard to find a vacuum attachment for the outlet port. So I used Tinkercad and cobbled something together. It works but you can't remove huge chips of material or it can clog…
Feet for a Technics SL-1900 turntable.
This is an adapter for mounting a RAK19007 inside a waterproof box for an outdoor node. Below is the box that I used. The mounting screws are 4mm. https://a.co/d/dFO39KT
Note: The Ethernet Module PINs didnt land where I expected based on the model, so I used a knife to cut the lower two standoffs. I attempted to replicate this in the .STEP but its not tested and certainly would be below the expected…
Here is a quick mounting plate for RAK19007/19003 that uses M2.5 heat inserts for mounting in a Zulkit junction box size 5.9" x 3.9" x "2.8. https://a.co/d/6S0OTV3
This model contains three variants of the rack mounting ears for the Zyxel GS1900-24E. First is the original, which matches the metal ears provided by Zyxel, and is likely too flimsy for 3D printing in plastic. There is a reinforced…
This is my self designed enclosure for a small portable node using RAK19003 . This version should take in all of the versions of RAK19003 but the LED locations are taken from version E (same as versions C and D). Following images…
Used with waterproof junction box containing 5mm grid . Holes: Sized for M3 bolts (30mm x 30mm spacing or "6, grid squares") Stand-offs: Sized for M2.5 threaded insert. Depth is 5mm. RAK19007 comes with M2.5 hardware for mounting
ABM: Absolute Bare Minimum node. A compact Meshtastic node based on the RAK 4631 and the venerable Parametric Rugged Box by Whity. This enclosure is designed to support a wide variety of Meshtastic features and be compact enough to secure…
This is simple case for RAK mini base board, 19003, with two versions. One is thinner, which cannot accomodate GPS module and antenna, and second one (3mm thicker) with space for mounting GPS module and it's antenna (which is glued in…
Set n Forget - Rooftop Solar Node Struggling to get the most out of your meshtastic portable node? Would you like to chat with other users from hundreds of KM away? Then this is the node for you! LIMITED BILL OF MATERIALS SET N FORGET…
This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…
Compatible with Shimano: BR-M9120 BR-M8120 BR-M8020 BR-M7120 BR-M820 BR-M810 BR-M640 BR-MT520 BR-MT420 Name Compatible Y8FZ05000 Shimano Deore BR-M575 and also: BR-M4050/447/446/445/3050/395/396/355/675, BR-T675/T615 Y8FF19000 Shimano…
Designed to nicely fit into a pocket. Takes: Module: https://www.amazon.com/RAKwireless-WisBlock-Meshtastic-Starter-RAK19003/dp/B0DFMMTQZM Battery https://www.amazon.com/dp/B0B7N2T1TD There are two versions of the case. With external…
This is a remake from "NodeBrix Modular Case System" from "Open Source Country". Thanks for the great work!!! I only remaked the frame for the RAK19007 for n-type antenna and the front (and back) cover. Printed with PLA on Anycubic i3…
Originally published here: Motorola Moto X4 xt1900 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the…
Quick and simple mount for RAK19007 base board with ethernet add-on module. Didn't see anything out there to help support the ethernet card when installing into an enclosure. It's not super pretty but gets the job done. This is not set up…
The RAK19003 is mounted with three M2.5 screws that come with the board. The lid snaps securely into place. There is a slot to insert the pcb antenna that comes with the RAK board and vent holes on the back to allow the temperature and…
Tipp: genug Infill wählen - (35% Gyroid reicht aus)
Compatible with Shimano: BR-R9170 BR-R8070 BR-R7070 BR-4770 BR-RX810 BR-RX400 BR-U5000 BR-RS805 BR-RS505 BR-RS405 BR-M9100 BR-M9110-R BR-M8110-R BR-M7110-R Name Compatible Y8FZ05000 Shimano Deore BR-M575 and also:…
I remixed this to get a bigger battery inside (the one I had in store) The case is super simple and compact. Use the original case lid. Than you @dreimal_8
WARNING: Requires modification to fit battery connector: Option1 - pop off battery connector plastic and solder battery wires directly Option2 - desolder battery connector and solder battery wires directly Option3 - options 1 or 2 plus…
This is a groundplane antenna jig you can use to make an antenna with a short pigtail of feedline. It fits over regular 2" central vac PVC tubing, or you can print your own tube. Inside the tube there is a board to mount a RAK 19007 base…
Meshtastic / Rak Wireless 19007 ethernet case. wanted something i could mount in the garage so it didn't need to be weatherproof.
Meshtastic Radio Case for WisBlock Base Board (RAK19007) This is a custom-designed Meshtastic radio case specifically made for the RAK19007 base board and RAK4631 core combo RAKwireless WisBlock Meshtastic Starter Kit US915 SKU 116016 –…
This is my take on a minimalistic portable mesh node for the RAK19003. Prints with no supports! Battery life is well over a week. Bluetooth companion went from from 90% to 75% in 7 days with several flood adverts and 1-3 messages sent…
I initially designed this for the rak wisblock 19007. I have also made a version for the heltec v3. It uses a 100x100 5v solar panel, n-Female bulkhead fitting, and 18650 batteries. I would not call this a weatherproof enclosure, but I…
Sumary The JUGGERNAUT System features a set of enclosures and parts to integrate LoRa-Transceivers, Smartphones and Antennas into your tactical equipment setup by mounting the individual components to your Molle / PALS System. The…
Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…
📄 Meshtastic Node Bracket for 150 × 100 × 70 mm IP67 Case ✅ Compatibility Case Fit: Specifically designed for the 150 × 100 × 70 mm IP67 enclosure from Aliexpress I recommand using as it is the go to case for outdoor applications. IP67…
This is a compact solar Meshtastic node for outdoor use. Materials List: RAK19007/RAK4631 Meshtastic Board Battery with JST PH2.0 Connector (I used the Qimoo 115659 5000mAh 3.7v LiPo) 915mHz LoRa Antenna (I used this:…
Those tiny IPX connectors on RAK 19007/4631 meshtastic devices can pop loose if you wiggle the antenna wire the wrong way, so I made this little tray to put the WisBlock in, with a top that goes over the antenna connector to keep it…
I designed this candlestick phone for a high school production of Newsies. There are similar models on the Internet, but I wanted to make one that's super easy to print and assemble. It doesn't require any supports or screws, has no big…
IO-Shield for the ITX Mainboard: MSI J1900i-S01 Fits nicely on every ATX, MicroATX and ITX Cases. Printing is super simple. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
I needed a simple model of the rak19003 so decided to model one from the board I already had it isn't super detailed but it is enough to make cases for this board
Funny sign I saw as a saying on Facebook. Made so I can stick to my Mac book case before I attend college.
Remixed @pdxlocs to allow for a battery to be placed underneath
Adds flush-mount BNC and SMA (optional) connectors to @stokey3D's design. BOM 1x BNC bulkhead ( amazon.com ) 1x SMA bulkhead ( amazon.com ) 1x 10,000mAh LiPo battery ( amazon.com ) 4x M3x10 (BHCS-preferred) 1x RAK19007 baseboard Designed…
his is a replacement drive gear for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Updated on 06/04/23 Gear, Drive, Small (2 pk) - PVXH008PK2 PART # PVXWLC1900WH ALTERNATE PART #'S…
Want a smaller version? Check out my other version for the RAK19003 and a 0.6W solar panel, it's about half the size and has all the same features. IMPORTANT! This model uses lithium batteries which can cause injury or death if…
3 perimeters 15% infill Printed with PETG No supports required Iron top surfaces (optional) EDIT: Replaced model file with corrected file. Original file had mounting holes at 5mm apart, but was not on a 5mm grid. Changed spacing for 5mm…
This is my take on an organizer to fit the three Millennium Series Games of Chronicles of Crime into one box. This insert will fit: Chronicles of crime 1400 Chronicles of crime 1900 Chronicles of crime 2400 Chronicles of Time (KE) All in…
This is a custom 19" rack mount designed for the Zyxel GS1900-8HP switch . It features left and right mounting brackets , each split into two parts , ensuring a secure and ventilated installation. The design includes ventilation holes and…
Hey my 3D-Friends! I have designed a easy wall mount for these ASUS-Routers: ASUS RT-BE96U ASUS ROG RAPTURE GT-BE98 ASUS ROG RAPTURE GT-BE98 PRO ASUS ROG RAPTURE GT-BE25000 ASUS ROG RAPTURE GT-BE19000 ASUS ROG RAPTURE GT-BE19000AI Here…
Modified file from SafetyDave1's excellen design. Added .25" to properly fit my Filtrete 1900. Use for both lower sides.
With this case you can design your own payload and attach it with a pair of M3 screws. It features a small notch in case you need to run a couple of wires down to the payload. Use the attached base plate model as a starting point for your…
This is an adapter to use RP-SMA and/or F connectors with the excellent RAK WisBlock case made by @stokey3D_252878, located here: https://www.printables.com/model/9289
I designed this for deploying Meshcore repeaters in a tidy, quick and repeatable manner. This mount is for attaching a RAK19003 PCB to the grid plate you can find on my profile. The PCB is secured using the M2.5 bolts which come supplied…
Extended the right part (part1) by 54mm
This fixture is used to sharpen the blades/knives of the Makita 1900B Power Planer (35 year old planer). Load the blade in the slot and run a sharpening stone across the top of it. Link to how to use it: https://youtu.be/cRXelLnXk74 Print…
Parts list included. I made some small adjustments to add the switch and external BT antenna. Tolerances are very tight to keep the model as waterproof as I can. Gaskets are printed in TPU, the rest was tested with PLA and ASA (shell…
Plate is friction fit, once assembled - push it down. Also added a back plate for pole mounting, I recommend ASA for UV protection, also try to print it as solid as possible. For inside I used Bambu PLA, remember ABS/ASA shrinks. Items…
Small, portable RAK19003 case with room for RAK12500 GPS module and external LoRa antenna. Fits a 1500mAh lipo battery (50 x 35 x 8mm) such as this one. Use some double sided tape if you don't want the battery to move inside. Case is…
Me make these things just for me and you but no for you make money. No copy, sell, trade, or take my design without ask me first. If you want to sell them in a small way (not big business), talk to me here. Follow rules of Creative…
A meshtastic case designed for using meshtastic in caves,
Simple mounting plate for a WisBlock RAK19007 for use in enclosures that provide only two M4 attachment points, 100mm apart on center. No supports needed.
Print one frame, lid and base and use two m3x8 screws to attach them together.
This is a reacreation of the RAK Wireless 19007 Wisblock base board. It contains the overall dimensions of the board and it's required clearances, to help you create an enclosure with correctly spaced mounting holes and inner dimensions…
