Counting matching models…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Der Ofen dient in erster Linie als Ergänzung des Modells vom Streckenposten Kälberbruch , ist da aber bei der Vermessung und Dokumentation nicht nachgewiesen und damit dafür hypothetisch. Daher hier als gesondertes Modell, gern auch fürs…
This is a replacement part for a South bend lathe model 9C that I just received, this part was worn out so made a replacement out of ABS PLA may be stronger. I made it in 2 halves and glued them together with ABS juice. The lathe has a…
This is the second part of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was designed for a South Bend lathe model 9C. The teeth have 14.5 degree pressure angle The gear has a DP of 18 The module is…
This is a model of this building: anyway it's close. The top balcony and the front porch of the actual building are very small so I made those a bit larger, and I wasn't sure of the interior layout but this should be close on the first…
A box/tray for all the bits and pieces besides the main pieces. All rooms have a fillet edge so its easy to grab even the small parts. Height is made so it fit in the game box on top of the piece boxes a the plate (see picture). Size is…
This model is compatible with the lego system.
printed with Prusa mk3s+ 15% cubic infill no supports I don't know CAD so modifications were made in prusaslicer
Flash Gordon Conquers the Universe - Ming the Merciless (Charles Middleton) - 1940 3D printable model.
Flash Gordon Conquers the Universe - Flash (Buster Crabbe) & Dale (Carol Hughes) - 1940 3D printable model.
A Sample from my current Kickstarter - a 1940s Section Gang Track Maintenance Worker with Shovel in multiple scales, including 54mm, 32mm, 1-64 and HO 1-87. I test printed up to 1:18. Highly detailed and accurate.
The print in the photo is printer at 0.15 mm layer height, Hilbert Curve fill pattern in five colors.
Ersatzteil Batteriedeckel für Vtech 119404. Spare part battery cover for Vtech 119404.
Flash Gordon Conquers the Universe - Dr. Alexis Zarkov (Frank Shannon) - 1940 3D printable model.
This is a replacement part for a South bend lathe model 9C that I just received, this part was worn out so made a replacement out of ABS PLA may be stronger. I made it as a single piece model printed in the orientation as in the stl file.…
This is the start of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was designed for a South Bend lathe model 9C. The teeth have 14.5 degree pressure angle The gear has a DP of 18 The module is 1.411…
This is a Metric Translation gear for cutting metric threads on an imperial leadscrew lathe this was designed for a South Bend lathe model 9C. photo is of 80/63 translation gear as I don't think this 127/100 would fit my present set up…
A proper desk for private detectives and investigators of all kinds, with both working drawers to keep things tidy as well as two secret compartments to hide valuables and important documents. Just remove the snap-in panels to open up the…
Flash Gordon Conquers the Universe - Ming's Throne Room - 1940 3D printable model.
Maybe will help somebody... I needed to replace broken plastic lever for the engine in Fortius Tacx T1940. I printed with 12 perimeters, but in general it matters to have max perimiter count in the most fragile place (you can see on the…
This is a Metric Translation gear for cutting metric threads on an imperial leadscrew lathe this was designed for a South Bend lathe model 9C. The teeth have 14.5 degree pressure angle The gear has a DP of 18 The module is 1.411 The 63…
Iconic Movie Villains - Rebecca - Mrs. Danvers - 1940
Easy to print. Wheels move. Needs a bit of glue.
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Tisk raději na dvě poloviny, tryska 0,4, PLA.
This is a replacement part for a South bend lathe model 9C that I just received, this part was missing so made a replacement out of ABS PLA may be stronger. I made it in 2 halves and glued them together with ABS juice. The photo's are…
The crowdfunded german box for Halls of Hegra is slightly larger than the original english box so custom inserts designed for the original are a little loose. This insert is meant to be combined with Hextras awesome Halls of Hegra insert…
This clip holds the rear parking brake cable to the rear toe stay. Should fit all P2 Volvo cars (S80, S60, V70, XC70, XC90). Volvo P/N: 9194000 Category: Automotive
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
The K&M 11940 is a robust and reliable music stand. However, while it is easy to disassemble and transport, it is not very comfortable to carry. Especially when carrying for a longer time, it tends to turn around and is not easy to…
1940s Toy Sports Car Use Any of Filament your choice Contains: 2 Poles and 4 Tires, Car piece. Model comes in whole but just in 7 parts. Age is for any for this Model.
Four .stl files for Prusa multi material printing. The air base markers are for the Axis and Allies Global 1940 game to replace the cardboard markers that the game comes with. Print instructions Category: Games
A coaster featuring the first DC Comics circular logo from 1940.
These are two quick and dirty models I made in about an hour for the broken bolt in my mortise door hardware. The tongue of the bolt is the actual piece that had broken off in my case (photo included with a VERY early prototype), but the…
These dividers are meant to be used for the Axis and Allies 1940 edition game boxes. I made a remix of this model for full customization of the dividers: For the long dividers, I made two halves, but I did add a file for the middle…
In the early 1940s, DC Comics used various Character Logos on the covers of comics, especially to depict the star of their anthology books. This one is for Starman, who appeared in Adventure Comics starting with issue 61.
Designed to replace a broken rubber retainer peg for a 1947 Lanchester, replacement rubbers are available for about £5 a pair, but this amount of TPU costs about 0.5p (GBP £0.005) each so it had to be worth a try :o) This is the finished…
🎂✨ Geburtstags-Jahreszahlen 1920–1940 – Perfekt für besondere Anlässe Mache jeden Geburtstag zu etwas ganz Besonderem! Mit diesen stilvollen Jahreszahlen von 1920 bis 1940 setzt du ein persönliches Highlight auf jedem Geburtstagstisch. ✔…
Designed to replace a broken rubber retainer peg for a 1947 Lanchester, replacement rubbers are available for about £5 a pair, but this amount of TPU costs about 0.5p (GBP £0.005) each so it had to be worth a try :o) This is the finished…
1940s Toy Sports Car Use Any of Filament your choice Contains: 2 Poles and 4 Tires, Car piece. Model comes in whole but just in 7 parts. Age is for any for this Model.
A coaster featuring the first DC Comics circular logo from 1940.
The Mark of Zorro - Zorro (Tyrone Power) - 1940 3D printable model.
The Mark of Zorro - Zorro (Tyrone Power) - 1940 3D printable model.
The Mark of Zorro - Don Diego Vega (Tyrone Power) and Lolita Quintero (Linda Darnell) - 1940 3D printable model.
The Mark of Zorro - Don Diego Vega (Tyrone Power) and Lolita Quintero (Linda Darnell) - 1940 3D printable model.
The Mark of Zorro - Zorro (Tyrone Powers) with Tornado - 1940 3D printable model.
The Mark of Zorro - Zorro (Tyrone Powers) with Tornado - 1940 3D printable model.
The Mark of Zorro - Zorro (Tyrone Power) &N Tornado in Action - 1940 3D printable model.
The Mark of Zorro - Zorro (Tyrone Power) &N Tornado in Action - 1940 3D printable model.
Flash Gordon Conquers the Universe - Flash (Buster Crabbe) & Dale (Carol Hughes) - 1940 3D printable model.
