Counting matching models…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A kit card of one of my favotite models of Corvette the C5 1997-2004 model. It needs some glue on the axles but should have spinnable wheels. I also sell these over on Etsy: https://glacierfrost.etsy.com
Just a simple switch panel I knocked up to replace the stock one in my 1998 Jeep Cherokee and that a few of my friends now run as well. I designed it to get rid of the 12V socket (lighter) and instead I run a screw in dual USB outlet with…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I recommend printing at the odd angle shown in the attached gcode to manage stresses in the part and reduce overhang issues but YMMV
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These plastic plugs replace the metal plugs under the sound deadening mat in the front floor panel. Print them from PETG and install them with silicone sealer. Watch the video here: https://youtu.be/OcwkOysXtds Print instructions Use PETG…
Bricht wohl gerne mal ab und das wäre der Ersatz. Kann sein das er noch bissel straff sitzt. Vll aus TPU oder PETG drucken ansonsten nochmal melden.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a cam lock to enable you to complete a timing belt replacement on your 1997 Volvo S90 with the 2.9L straight 6, (Vin Code 96), engine code B6304S. This model may require some slight trimming if the print suffers from elephant…
Print with a High Temp PLA or PETG Used FILACUBE HT-PLA Has worked great. Survived a Texas Summer very little distortion
Batman - Suit Collection - Batman & Robin - 1997 3D printable model.
This is a Sketchfab converted model, it is a 1997 Asia towner, however I have customized two and made both a Towner and a 1992 Daihatsu Hijet, I hope you enjoy! Link to original model: Asia Towner / Daihatsu HiJet - Download Free 3D model…
Married with Children - Buck Bundy - 1987-1997 3D printable model.
Starship Troopers - Johnny Rico - 1997 3D printable model.
Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…
This part replaces the rear center console ashtray in your first generation Toyota RAV4 (1994 - 2000). Watch the video here: https://youtu.be/IHYhd5vFEI4 Print instructions Use Toyota screws 93568-55014 and an adhesive LED light strip.…
Iconic Movie Props - Men in Black - Neuralyzer - 1997
Starship Troopers - Jean Rasczak - 1997 3D printable model.
Married with Children - Bud Bundy (David Faustino) - 1987-1997 3D printable model.
This is an IMMOBILE vent insert. It is meant to replace all moving internals via friction fit. Printed in PA612 CF (probably overkill) but fits nice and snug. I suggest painting in your supports just along the louver edges. The client…
Printed on Ender 3 Pro. I would suggest printing the two sides seperately even if your printer is big enough for the full model. The sides are made to allow enough leeway that a few mm adjustment can be made without a problem.
Starship Troopers - Dizzy Flores - 1997 3D printable model.
Beautiful silhouette of the Porsche 911 1997. Suitable, for example, for hanging or just for display. I also recommend it as a gift for lovers of cars, formulas and others... Beautiful print! You can change the scale as you like, but…
Starship Troopers - Carmen Ibanez - 1997 3D printable model.
Starship Troopers - Zander Barcalow - 1997 3D printable model.
Starship Troopers - Ace Levy - 1997 3D printable model.
Starship Troopers - Carl Jenkins - 1997 3D printable model.
Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art
desenvolvida por IA e qualquer pedido é so entrar em contato.
1997 - 2004 Mercedes Benz SLK 230 Kompressor Headliner Emergency Roof Lock Cap Print with a High Temp PLA or PETG Used FILACUBE HT-PLA Has worked great. Survived a Texas Summer very little distortion
Starship Troopers - Sgt. Zim - 1997 3D printable model.
Iconic Movie Moments - Titanic - Rose on the Grand Staircase - 1997
I didn't care for the dingy, yellowed dome light lens in my F250, so I made a new one. This should fit 1980-1997. Also included a plain one to fit various 1980-1997 Ford, Lincoln, and Mercury dome lights.
Space Rovers - Mars Sojourner Rover - 1997 3D printable model.
Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…
Very rudimentary spacer to raise the 3rd brake light up 1" to clear my 33" spare. How I Designed This Removed the 3rd brake light and measured rough estimates. Could be optimized, but it works. Category: Automotive
Anaconda - Paul Serone - 1997 3D printable model.
Iconic Movie Characters - LA Confidential - Bud White, Ed Exley & Jack Vincennes - 1997
Lego 30120 Helmet UFO high quality part 1997-1998 print with supports, lay onto the forehead for best adhesion if fit is too tight print in 101-102% scale
The cable from the internal door handle to the latch can break, and the part is no longer available (the cable for generation 2 seems to still be available). This guy made a fix with some cable ties: and I actually think it is a good and…
Iconic Movie Posters - Titanic - 1997
Grand Theft Auto" (GTA 1) is a video game released in 1997 that laid the foundation for the successful GTA series. The game offers an open world where players can explore various cities from a top-down perspective and complete criminal…
This model will let you mount a Joying single din touch screen head unit in a 1997 - 2001 Subaru Forester or Impreza (that has a forester dashboard) on the dashboard. The original radio locations in these cars is not very practical,…
The design was to fix/upgrade a 1997 Acura cl door speaker mount. The original mount needed a spacer to give widow clearance between the replacement speaker and windows. filament ptgcf 0.3mm layer height, 30% infill support cubic. On a…
Exact copy of the license plate light for Mitsubishi L200 1997-2006
My sister lost one of the switch covers for her blue Toyota Rav4 from 1997, so she asked me to make the four of them i blue for her. Check this video (Click here if the video doesn't work)
Print using flexible TPU. Works great
Celica rear speaker adapter plate. I chose to file down the car bracket a little in 2 places to help it fit tight, or you can add some height to the model if you prefer. This fits a 6 1/2 inch speaker using the existing holes in the cars…
replacement part mitchibitie colt hat shelf hinge point from 1997 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Yes Resolution: 0.12 Infill: 25% Filament: raster PLA Black Notes: replacement part…
After holding off for years on buying a replacement window gear for my 1989 Ford Ranger XLT, and then having my online order abruptly canceled by the seller 😅, I finally set out to design and print my own. I initially intended to use ABS.…
This handle should fit most GM trucks from 1995 to 2001, although I’m not certain of the exact years. It fits very well and holds up well. I printed my original one over two years ago, and the passenger side OEM recently broke, so I…
Xmod RC front clip for a 1997 Toyota Supra Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Yes Resolution: .2 Infill: 100 Filament: generic pla Category: R/C Vehicles
my audi a4 1997 remote broke so i had to make a new one, disassemble old one, place it in printed one, and you are good to go, needs 4 tiny screws (i found laying around i dont know what size they are)
This is a replacement turbo laser for the Sega Star Wars Trilogy Special Edition pinball machine from 1997. It was made from a 3D scan of the original part. For best visual results, print the part in the orientation that it is in when…
Kickstart your heart and bring the raw, heavy-metal aesthetic of Mötley Crüe straight to your wall! This piece captures the gritty, script-style 1994–1997 era logo with optional skull crossbones and miniature skull umlaut dots. This model…
Applicable Models: Honda CR-V 1997-2001 RD1/Gen1 PRINT NOTES: Material: TPU 95A (I recommend NOT softer than 85a) Walls: 99 (Far more rigid compared to 100% infill, but as you like) 1x "Steering Cut Bush" 2x "Steering Bush" (Naming is a…
Replacement rewind button for 1993-1997 ford ranger radio. Mirror model for Fast Forward button
I wanted to retire the box for the Black Rose expansion for Mississippi Queen. I designed a box for all 8 river boats, and a separate box for the passengers, ruler, cabins, and die. I don't make any attempt to fill up the interior of the…
This is a reasonably robust, minimalistic solution to broken plastic tonneau cover rails in 5th gen Honda Accord station wagons. With the parts out of production and used ones going for $150-$300 USD, this will let you cover your cargo…
Update 11 May 2026 : Add Replacement part for Rei's student bag for the 1997 School Uniform version. This upload aims to control, reduce bending/deformation of the models in photos. It includes Base, support pole, grip, and a schoolbag.…
Is the frame number cover / VIN hatch missing on your classic Aprilia SR50 Old (first generation, manufactured from 1992 to 1997)? Since these original plastic parts are virtually impossible to find or often broken, I 3D-modeled a custom…
Ignition Coil Stand/Display for 1983–1997 Ford 5.0L This stand makes a great display and engagement tool for an automotive repair shop. It can be used to show an old coil versus a new coil. While designed from a 1994 Ford F-150 ignition…
phone holder mount, my action cam kit came with a phone holder so I decided to modify Honda Accord 90 ~ 97 accessory button phone holder mount by GayPN To fit a go pro mount in my poverty button on my 5th gen honda accord. Use pet-g, abs,…
Plugs the bulb opening in the back of the OBS Ford composite headlight housing while the bulb is out. Use it to keep dust, moisture and bugs out during storage, or to seal the housing while you clean or restore it. It twists in like the…
Replacement rewind button for 1993-1997 ford ranger radio. Mirror model for Fast Forward button
Applicable Models: Honda CR-V 1997-2001 RD1/Gen1 PRINT NOTES: Material: TPU 95A (I recommend NOT softer than 85a) Walls: 99 (Far more rigid compared to 100% infill, but as you like) 1x "Steering Cut Bush" 2x "Steering Bush" (Naming is a…
Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art
Grand Theft Auto" (GTA 1) is a video game released in 1997 that laid the foundation for the successful GTA series. The game offers an open world where players can explore various cities from a top-down perspective and complete criminal…
Part 1 FZJ-80 AMPS mount: Fits into the "useless cubby" location. Incorporates a unique arm that cantilevers to the frame crossbar which makes this much more rigid than other alternatives. Is able to fit two AMPS ball mount plates.…
This fits the (2023) CB radio Cobra mini 19 AM or AM/FM https://amzn.to/3GzVGT1 The ashtray and its carrier will need to be unscrewed. This replaces it. Utilizes existing OEM screws. Print with 2-3 walls in ASA filament. Front face down…
DIN mount for 2 meter HAM radio: Fits in the radio or glove slot. Fits Radioddity DB25-D DMR or Retevis RT73 DMR or other radio that is 123x43mm. Includes two removable switch mount plates. Note, programming cable will need to be non-90…
This is a replacement fan control knob for a 1997-1998 Jeep Wrangler. A small area has been notched for paint to be applied to indicate direction. For use with controls that use sliders for output area and heat/cool mix. If your Wrangler…
Fun model with Men in Black standing in front of elevator doors. Print the figures and elevator separately, then paint and glue together.
Stargate SG1 - Gen Jack O'Neill (Richard Dean Anderson) - 1997 3D printable model.
Stargate SG-1 - Col John Sheppard (Joe Flanigan) - 1997 3D printable model.
Stargate SG-1 - Col Samantha Carter (Amanda Tapping) - 1997 3D printable model.
Batman & robin - Mr. Freeze (Arnold Schwarzenegger) - 1997 3D printable model.
Stargate SG-1 - Daniel Jackson (Michael Shanks) - 1997 3D printable model.
Stargate SG-1 - Teal'c (Christopher Judge) - 1997 3D printable model.
Stargate SG-1 - Teal'c (Christopher Judge) - 1997 3D printable model.
Married with Children - Al Bundy (Ed O’Neill) - 1987-1997 3D printable model.
Married with Children - Peg Bundy (Katey Sagal) - 1987-1997 3D printable model.
Married with Children - Kelly Bundy (Christina Applegate) - 1987-1997 3D printable model.
Married with Children - Bud Bundy (David Faustino) - 1987-1997 3D printable model.
I saw a lot of window stoppers here on printables but did not find the correct one for my windows. So I measured my window and designed a model on my own with Tinkercad. Wall Loops = 3 Infill = 30% Layer Height = 0.20 mm No Support No Brim
Buffy the Vampire Slayer - Buffy Anne Summers (Sarah Michelle Gellar) - 1997-2003
