Counting matching models…
simple, but loud two tone keychain. due to about 4kHz + 4,75kHz combination extremly noticable and loud. no supports needed. prints ~3 minutes, and uses ~1g of filament. (i achieved ideally 1g with 10% infill and ASA) Print as many as you…
Small 1cmX1cm test and calibration cube Fast to print (10min) (0.5m, 1g) With many tests on it: Calibration 1cmX1cm or 0.4inX0.4in Overhang test Quality test Half sphere test Bridging test Bed adehision test Stringing test Small details…
Alright, my friend's in need of a countdown for those pressing deadlines. Ended up with this. V1 Ring Counter VASE/SPIRAL MODE- Size of ring: 21mm Printed on Ender 3 v2 Cura settings: quality-low .28mm bed temp-0 (use EVA glue), else 60…
Storage for 1g Valcambi silver bars There was another 24pc Valcambi Wallet that has since been removed before I was able to print it, So i made a similar version. Print the base at 101% scale and the lid at 100% for best fit no supports…
THIS IS A 65mm MICRO WITH 40mm PROPS THAT WEIGHS 21g AWG!!!!!!!!!!!!! Back in the day when Tiny Whoops hit the market the average weight was around 21-22g with brushed motors and 31mm props. It's crazy to think in just a few years we can…
This Mini Whistle weighs in at just ~1 gram yet delivers a genuinely deafening 115 dB , verified using a decibel measuring app (as shown in the test screenshot). Small enough to disappear in your pocket or on a keyring, it's a functional…
Nobsound Amplifier Holder with a mount pattern that fits 8020 compatible extrusion popular with Sim Racers. Will hold the amplifier vertically on any 8020 extrusion Designed to use M6 countersunk bolts Bolt spacing is 1.5" apart
A small shelf designed to hold the MikroTik CRS305-1G-4S+IN switch in place and connect to a server rack. There are small pegs to hold the switch in place: it is a somewhat tight fit, but the switch can be set atop the pegs and slid…
Instead of a big scraper you only use for scrape lines, try this tiny purge line remover tool to save your fingers and time. It is an extremely quick print with no supports needed and has a sharp enough edge to separate the purge line…
Tired of the same old whoop frames breaking? Whatever your poison 1s or 2s, this should fit the bill. Yet Another rendition of my past designs. An actual whoop 64mm size with 31mm props and the latest brushless motors along with all the…
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
Quick print to test the bed level for the main modes. - NO Brim/Skirt Needed! SINGLE PRINT SPEED VERSION WILL WORK ON ANY 300x300mm bed! MODE Prints for Sovol SV04: SPEED VERSIONS MODES NOW OUT : Copy Mode Mirror Mode (Max Bed) Dual Color…
For "cocking engineers", who need a perfect amount of sugar or salt. I designed the sugar dispensers for the right sweetness in my morning coffee (while a salt dispenser came out just as a by-product, resulted from a mis-calculation of…
An adjustable quick-release mount for the Valentine One Gen 2 radar detector. Uses magnets to handle the quick release aspect: you have to rotate it out to get it out. Inspired by the DS1 mount (https://www.rdforum.org/threads/113691/),…
A simple 1 gram wall mount for moos or some other aquarium plants. It's fastened via a common suction cup and a cable tie. For those who are interessted, the moos in the picture is “Christmas Moos - Vesicularia montagnei”. EDIT…
Printed in PLA on Ender3V2. Tried to print with PETG, but the digits did not stick reliably on the print bed. For the lid, select NO to fix wrong scale and YES to load in group.
A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
This whoop is based on Rygar1432's idea, but i designed the model from scratch. FC is secured by the (included) rubber spacers on a separate nylon screws. This reduced a lot of noise coming from the motors into the FC and increased flight…
Step and Fusion 360 files that model the internal volume of a 1 Gallon/5L Ikea Samla storage bin - use them to create your own organizational designs.
A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…
Was recently introduced to an alternate bass shaker setup for my 8040 simracing rig. Using the Nobsound NS-01G two-channel amp along with the Dayton Audio BST-1 Bass Shaker, you can get tactile feedback when gaming. Attaching the shaker…
A large kelvin structure matrix to print as a demonstration. It is possible, when using extreme pla from 3dmax, to support a 300lb person standing on this thin matrix, the inherent strength of the design is such. Category: Biology
I created mounts for Natalie T 's Modular 10 Inch Server Rack to mount MikroTik hAP ax³ and CRS310-1G-5S-4S+. The Mikrotik hAP ax³ uses a transparent base for the body of the access point that allows the device to be mounted horizontally…
Holds the bias tee PCB securely to stop any potential shorts or damage during use. Has a 5mm hole in the lid to allow DC cable to be fed in. https://www.george-smart.co.uk/projects/wellgood-loop/
This handwheel is suitable for the seat adjustment of the Golf 4 and probably for other car models of the volkswagen group. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Lines…
Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…
Nobsound Amplifier Holder with a mount pattern that fits 8040 Bosch Rexroth compatible extrusion popular with Sim Racers. Will hold the amplifier in position bolted to the side of a sim racing rig or anything to be honest.
Wandhalterung für eine Makita 40 V Stichsäge, das Maß funktioniert mit der Schutzhülle auf dem Sägefuß. Ich habe eine Version mit einer kürzeren Aufnahme hinzugefügt, um den Weg für das Einstecken der Stichsäge von oben zu begrenzen.
Nobsound NS-01G Pro Amplifier mount designed to clamp onto the playseat challenge tubes (25mm diameter)
If these parts are missing or are damaged, I tried to design my own and 3D print them. Singer spare part no. #44879-482 Tension Spring Cup is composed of two parts: 0-9 dial file, where corresponding number label 0123456789.lbx need to be…
A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…
VW LT Speedometer pinion 281957821G (Z=18) Designed but never used! Print and use in car on your own risk! Also if you scale up it looks good as an ornament on a desk.
Total weight around 29-31g. Print using "lines" support and 20% infill.
Nobsound NS-01G Pro Amplifier Mount, mod. for plastic shelve (33mm dia pipes) This is a remix of… https://www.thingiverse.com/christhorn/designs just added a mount for the plastic shelves…
I wanted to design a Polaroid stand that would be as easy to print as possible and using little filament. It works surprisingly well and is also rather understated visually, which I really appreciate in this case. // Ich wollte einen…
Printed with TPU to replace the rotten original.
A simple mounting bracket for the Nobsound NS-01G Pro USB amplifier. Use two M5 button head screws and some hammer head nuts to mount this to a T slot profile. I printed this on a Bambu Lab P1P with 0.2mm layer height in PLA. It's a snug…
The fan fits perfectly on Harbor freight tools 21 gallons Mc Graw compressor. Print with PETG 100% infill and reverse it 180 deg. on the print bed so the hole is facing down to minimize supports needed. Hope this could help someone
A model that provides a stable, sturdy, and completely reversible mount for your ADXL345 for input shaper calibration. Requires two M2x4mm screws. Print the model, but when it concludes keep your bed heated Screw ADXL345 into the mount…
Adapter designed for Sencor SFD 851GR to allow spools of filaments to dry without having to destroy the original drying sheets. PETG printing was more stable, with ABS the layers began to separate after a few dryings. Print Settings…
A 2in1 Mini Cleaning Tool for USB Ports, Earbuds, or anything small. Measurements: 13x59x1mm
This is a 3d printed Nobsound NS-01G Mini Amp Mount. The holder is designed to work with the Nobsound model# NS-01G mini amp, which is a highly recommended inexpensive amp for powering transducers for sim racing. It may also work with…
If you want to mount a fibreglass bumper on an 911 G body they usually come without any mounting brackets. The brackets are made so you can use the original mounting points on the car. The front center brackets need a speed nut and a M4…
This adapter will help to reduce your mouse weight. I recommend useing lithium battery with this mod to lower weight as much as possible. Adapter holds on battery pretty well ;) There is v2 model now. weight: (material PETG) AA alkaline…
I use a Ryobi vacuum in my sewing and crafting room, every time I was using the the original model it was lifting my cutting mat as well as pulling my ironing board due to it having no way for air to enter the vacuum when place flat as it…
SnapSlice Mini V2 is a tiny, lightweight print-in-place box opener designed to be quick and convenient to print. At just 2.31 grams, it uses very little filament and can be printed in under 8 minutes. Features: ⚖ Only 2.31 g ⏱ Under…
A 6-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
Practice rim for horns
I made a funnel for my evo, works great. I printed it in PETG, 4 walls, 10% infill.
Saw that 121GW has a little hook at back of case, so decided to make a wall-mounted holder Made in SolidWorks 2017, file attached as always UPDATE: v1.0c, added a chamfer to front faces to make alignment easier
To be made of Tpu 95a with 100% infill Corvers control arms Sway bar Subframe all 8 of them Please note. it uses all the stock metal pins out of the rubber bushings i used fire to burn them free. Power steering is bushings are a remix…
10" Rack panel for MikroTik RB951G-2HnD
4mm holes for underside mounting.
I wanted a filament clip that could fit all spools, didn't get in the way of stacking my spools, and allowed me to finish my last few centimeters of filament. So I modeled this minimalist model, quick to print and consuming less than one…
This mount is designed to be used either with Underware, or multiboard, to mount your Unifi 1G Switch.
This Sencor SFD 851GR Spare Drying Tray contains two parts, so you can use just the frame and make a space for filament with it. The model is bigger, so you will need bigger printer.
Description ESRack is a very good modular rack mount system created by @EvilProphet . I created a module for the MikroTik CR305-1G-4S+IN from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the…
Printed at 0.2mm, 4 wall and 40% infill
A Costimizable TAG fpr all USE CLEAR Heart in the Blend and Text for simple NAME and Branding feel Free to use your own Stuff on the CLEAR
Rack Shelf for CRS305-1G-4S+IN but shortened to save fillament, and mirrored to show the status lights better.
In the past time, I saw several Singer 431G Slant-O-Matic sewing machines on auction sites missing Length stich lever knob. I have bought myself a such one, a friend of mine too. The same lever is on following Singer machines: 401, 402,…
tried coming up with my own zip tie design - pull the tail through the bottom hole and latch it - tuck in the leftover through the top to secure it - pull on the tab up top to help release the material it's very strong but also difficult…
SIngle gang UK Box with holes for 20 and 25mm corrugated tubes to bring in cables, and M3.5 sockets to wall mount, plus the M3.5 sockets to screw in the front plate. This is my first design I ever create as I learn Fusion 360, and any…
Simple box design for your Convoy S21G, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery in case you are using a backlit switch. You will need 3x M3x20 Screws. I recommend printing the box,…
Clean, support-free 2” net cup optimized for fast prints (only 11g). Perfect fit for mason jar hydroponics, kratky setups, and small indoor grows. Simple, reliable, and ready to use straight off the printer.
This is a chunky version of a T connector for a Bestway Shade Pool and earlier versions, the kind you can purchase from Kmart (Australia) etc. there is also a model for a foot replacement but I'm mostly focused on the T connector in my…
box for Huepar B011G cross line laser with space for spare batteries Huepar B011G Kreuzlinienlaser Aufbewahrung mit Platz für Ersatzbatterien material: 3DJAKE TPU A95 nozzle: 0.6 / layer height: 0.3 / infill: 15% no support needed lid and…
Wallmount Makita HP001G 40 V Akkuschlagschrauber
Staubsaugeradapter, um die Makita Stichsäge JV001G an ein Staubsaugerrohr mit 35 mm Durchmesser anzuschließen.
Loctite glue holder for bott square peg board
i like these tiny 1g super glue tubes https://amzn.to/3RagIjm for edc, tool boxes, bags, and first-aid kits etc but the caps normally have to be stored separately as they puncture the tube for usage
I needed to mount a new Fortigate 91G in a network rack but it didn't come with ears. I printed mine using PLA on a diagonal (lots of supports) for extra angular strength since the firewall was twisting the ears a bit. Screw holes line up…
Printing tips: Slightly tilt the head back and add support material near the base, headphone and the back of the head (where the cap starts) Original design by LAMO
mount with double sided tape or glue. print with supports on build plate only.
1GB Plymouth Laser/ Eagle Talon/ Mitsubishi eclipse Side marker light clip MB596509. I recommend printing on resin printer. Might need some sanding. It is exact copy of original.
This Gridfinity storage bin is designed to hold 5x 21g Kaizuo Glue Sticks from Aliexpress. Other brands will most likely fit ( except Elmer's 22g glue stick, which you can find a bin for here ). The diameter of the 5 holes is 26mm. Base…
MikroTik CRS305 Dual Rackmount — 1U, 19", LEDs Front, Fan-Ready Mounts two MikroTik CRS305-1G-4S+ switches side by side in 1U of a standard 19" rack. Most CRS305 rackmounts turn the switch around so the SFP+ cages face front — convenient…
A simple holder I designed to attach a Vonets WIFI repeater to my Jubliee printer. It is a snug fit so the Vonets won't fall out, even if you mount it upside down. Screw holes are designed to accomodate a small flathead bolt as shown in…
Very quick to print filament sample card that can be directly used as a bowden-tube coupler clip. Has a small area for important notes. Attached files for PLA PETG TPU+PETG with filament change (TPU first, then PETG) (layer for filament…
Next Level Racing F1GT simulator cockpit stiffening kit — designed to reinforce the two legs supporting the wheel plate. I didn’t have a long M8 bolt on hand, so I designed an expansion bolt that works with a wood screw instead. You can…
remix Sir_Stigma
Needed some tees for my daughters tournament in the morning and all the stores were closed so I whipped up this bad boy. My first ever model so criticism is welcome but my ego is fragile so word it gently please D: Prints in 2 minutes on…
This a a ball that that was designed to support a Cannon Powershot D30 camera in water. The camera is waterproof, but sinks in fresh water. A real bummer if dropped off a boat. The camera measures ~ 2-5/8 X 4-1/4 X 1-1/8 and is about 220…
The FTTP modem installed in the UK by city fibre is the Calix 801G v2 GigaPoint ONT Modem Unfortunate the model is black in colour so may not match the wall colour where it has been installed. This is a simple slip over cover to change…
Sometimes stuff is just too pretty to have a hole poked through. This is an addition to the myriad of similar models out there. Designed for 10×2mm magnets, it uses small breakaway tabs at the top edge, that jam the magnet in place. Print…
This is a 1U rack mount for MikroTik CRS305-1G 4S+ IN . This model has exactly twice the width of the original model , so it can be used in combination with the original model. (e.g. 1 MikroTik with 4 raspberry pi, 2 MikroTik with 2…
Ultra-Minimalist 3DBenchy IKEA SKÅDIS Hook (<1g Spool Saver) Have a tiny scrap of filament left at the end of a spool that isn't enough for a real print? Don't throw it out—turn it into a display hook for your 3DBenchy benchmark fleet!…
Allow mounting the switch onto an LGX panel opening, such as onto this: https://www.amazon.com/dp/B0C49HJ79H Printing To quote the creator I remixed from: This switch can get really hot while operating. Do not print it in PLA/PLA+ or…
Tests hole tolerances from 1.9 mm to 2.1 mm to find the best fit for using 1.75 mm filament as a hinge pin. Prints in 3 minutes and not even uses 1 grams of filament. Hole sizes from the right side of the rectangle: 1.9, 1.95, 2.0, 2.05,…
Pasacable MSX Panasonic, FS-A1WX, FS-A1WSX, FS-A1GT , FS-A1ST, para cuando cambias el transformador por uno a 220v y necesitas poner un cable nuevo
Here is my solution to organize the 11g Loctite adhesive tubes. I designed one with a stacking lip for better storing when not in use. Additionally I designed a 1x1 unit for storing the standard mixing nozzles. EDIT: I revised the nozzle…
A minimalist stand for displaying your Aviationtags. It uses around 1g of filament and is designed to be as unobtrusive as possible. I recommend you print it in PLA and it should not damage your tag, but make sure the slot is clean before…
This is a replica of the classic figure from the box Wizards (sometimes Wizards and Illusionists) number 2001. ( http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2001.jpg ) As seen in the photo, my original has a defect -- a portion of…
3D-printable mounting parts for the dual-band satellite antenna designed by George Smart, M1GEO/G8OCV: a 2 m Moxon plus a 70 cm Yagi on one boom. The antenna design, element lengths and spacing are his. I only designed the printed…
I wanted to expand my old laptops storage capacity to use it as a home server. However, not enough drives fit it to meet my storage and redundancy desires (4 drives in RAID 5). Therefore I designed a cage that attaches to the bottom of…
Got tired of having my banana and alligator adapters rolling around everywhere. So I made this. Printed in delicious ProtoPasta High Five Blue to match the meter and be all sparkly. Category: Tool Holders & Boxes
