P
PrintablesPolyPrint
Cali Cube 20x20x20
Simple Cube
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
- Downloads
- 1,125
- Likes
- 11
- Rating
- 5
Search results: 20x
1,229 models
P
Printablescmenard
30x30 to 20x20 Flight Controller adapter
This is a 30.5mm to 20mm FC adapter. The 20mm mounting uses 2mm screws and can be tapped as is. Fits my Xrotor nano stack perfectly! Category: R/C Vehicles
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
- Downloads
- 718
- Likes
- 14
- Rating
- 5
P
PrintablesJan Olejnik
TinaTina - 90mm brushless drone frame (1103/20x20mm)
A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar. The frame comes…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 688
- Likes
- 185
- Rating
- 5
P
Printablesgig
CUBO CALIBRAZIONE 20X20
Cubo utilizzato per la precisione dimensionale della stampante utile per calcolare gli step per mm e altri parametri Cubo stampato con paramtri di default di prusa slicer per prusa mini+ e filamento della geeetech Per una maggior…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
- Downloads
- 543
- Likes
- 0
- Rating
- 0
P
PrintablesGarage Maker
Fan Grid 120x120
A beautifull fan grid 120x120 with hexgonal pattern
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
- Downloads
- 540
- Likes
- 28
- Rating
- 0
P
PrintablesBlubber
Drybox / Silica Box 20x40x80mm
Prints fast and with not much material. Holds enough silica to maintain a single spool
Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant
- Downloads
- 403
- Likes
- 59
- Rating
- 5
P
PrintablesArt3Design
Dice 20x20 (various versions)
If you need a quick dice to play your game, you can print these dices. 6 versions aviable: 1a. Cube dice 1b. Cube dice shell 2a. Round dice 2b. Round dice shell 3a. Classic dice 3b. Classic dice shell Cube dice is also great as…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
- Downloads
- 403
- Likes
- 15
- Rating
- 5
P
PrintablesSwim
Rugged 9mm Ammo Box Mini Collection (20x, 25x)
9mm Rugged Ammo Box Mini Collection (20x, 25x) This is a remix of the Rugged Parametric Box by Whity, which was remixed by groog adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
- Downloads
- 334
- Likes
- 52
- Rating
- 5
P
PrintablesAinon3Dtisk
Calibration cube 20x20
Hello, Today I have a 20x20 Calibration Cube for you. It is suitable for setting the ideal size of your print. I succeeded :-)!!! I used PLA/PETG as the material. No need to use supports If you are interested in my work, the links are…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
- Downloads
- 259
- Likes
- 5
- Rating
- 5
P
PrintablesAinon3Dtisk
Box, crate 160x120x70
Hello, Today I have a Box for you, a 160x120x70 container . Ideal for harvesting fruits and vegetables. Also suitable for storing food and other things. The boxes fit together nicely, they can be stacked on top of each other. I used…
Print approx. €9.45–€11.54 excl. taxPreliminary estimate for one variant
- Downloads
- 250
- Likes
- 66
- Rating
- 0
P
PrintablesDwarfkiller97
Chainmail with & without plate (5x5,10x10&20x20) / Cotte de mailles avec et sans plaque (5x5,10x10&20x20)
ENG: Chainmail :5x5, 10x10 and 20x20 mesh versions. With or without plate. No support, print plates downwards. FR: Cotte de mailles : versions 5x5, 10x10 et 20x20. Avec ou sans plaque. Sans support, plaques d'impression vers le bas.
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for one variant
- Downloads
- 242
- Likes
- 27
- Rating
- 5
P
PrintablesMarcin
DSO152 FNIRSI oscilloscope box (120x200)
Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
- Downloads
- 148
- Likes
- 31
- Rating
- 5
P
Printablesvashmalachi
Beretta Bobcat 20x 22LR 10rd Magazine Follower
This modified follower allows for 10 rounds of 22LR to fit in the standard 8 round magazine of the Beretta Bobcat 20x. To install: Remove the pin from the existing follower. The pin has a pointed end. You must push the pin out from the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 120
- Likes
- 4
- Rating
- 0
P
PrintablesEl_Gato
Teilbare Mutter M20x1,5 SW30 / Lock Nut divisible M20x1,5
Für die Montage braucht Ihr einen Kabelbinder (140x3,5mm, 1,2mm dick). Gewinde M20x1,5 braucht keine Nachbearbeitung. Schlüsselweite 30mm Konturen → 3 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Nur für…
Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant
- Downloads
- 118
- Likes
- 5
- Rating
- 0
P
Printablesgskollnau
Bonsai pot 10 hexagonal rounded (mame)_120x120x46mm
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
- Downloads
- 115
- Likes
- 21
- Rating
- 5
P
PrintablesStevenTh
Stepladder foot replacement 20x33mm
Replacement feet for small stepladders with a frame of 20.40 mm x 33.40mm and a ground angle of 22°. Print instructions Best printed in non-brittle plastics. PETG is what I used. Printed standing up with a snug support. 0.20mm layer…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 106
- Likes
- 9
- Rating
- 0
P
Printablesvashmalachi
Beretta Bobcat 20x 22LR Magazine Loader
A tool to ease the loading of Beretta Bobcat 20X .22LR magazines. It comes in two variants, one with wings and one without. The wings variant allows for easier unloading and improved one-handed operation. The no wings variant is more…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 72
- Likes
- 4
- Rating
- 0
P
PrintablesH44S
ZIGARETTEN HALTER (20X STÜCK PACKUNG) // CIGARETTE PACK HOLDER LUCKY STRIKE
My girlfriend always complains that cigarette packs are everywhere, which is why I designed a holder with Fusion 360. Elegoo Neptune 4 Plus 0.2 mm infill: 15-25% support: No Elegoo Pla pro 150mm/s
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
- Downloads
- 70
- Likes
- 15
- Rating
- 5
P
Printablesgskollnau
Bonsai pot 14 hexagonal curved inwards (mame) 120x120x70mm
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Print approx. €5.08–€6.21 excl. taxPreliminary estimate for one variant
- Downloads
- 65
- Likes
- 11
- Rating
- 5
P
PrintablesSam Kudarauskas
MGN12 Linear Rail on 20XX Extrusion Mounting Guide
Ensures your linear rails are mounted parallel to your 20XX extrusion. Prints < 8min & no extra hardware required! Add a comment if you want it to be adapted to any other linear rail or extrusion.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 56
- Likes
- 5
- Rating
- 0
P
PrintablesChadCarney2001
Gorilla-mount to 20x20 M2 mount adapter for ESC/stack
Designed using a TBS LUCID stack, and a quadmula frame. The frame uses M2 screws to mount the stack, this is unlike a lot of other frames. TBS's own 20x20 adapter will not work for frames like this. The lucid stack already has threads for…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 53
- Likes
- 3
- Rating
- 5
P
Printables3dprints4life
Beautiful simple and stable box 20x10x8 cm
A simple but beautiful box with dimensions 20 cm x 10 cm x 8 cm (length x width x height). The wall thickness is 2 mm. For that reason you will need some filament for printing. :) Due to round corners inside the box, the box is easy to…
Print approx. €7.88–€9.63 excl. taxPreliminary estimate for one variant
- Downloads
- 47
- Likes
- 2
- Rating
- 5
P
Printablespaw3D
SpeedyBee Maser 5 v2 - Mateksys M10Q-5883 GPS Compass Mount Rear (20x20 mm)
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. It mounts the module to the drone's rear. Special care was taken to design the mount such that the module sits…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
- Downloads
- 46
- Likes
- 2
- Rating
- 0
P
PrintablesDJ
Battery Rack 20x AA
I recreated this model, inspired by the “AA and AAA Battery Tray ”. What I liked was the closed bottom and its limited height. The first version had 64 facets for every circle but that generated a >40Mb .gcode file. After reducing the nr…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
- Downloads
- 39
- Likes
- 1
- Rating
- 0
P
Printablespaw3D
SpeedyBee Maser 5 v2 - Mateksys M10Q-5883 GPS Compass Mount Top (20x20 mm)
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. Instead of mounting the module to the drone's rear, the mount moves it to the front. The main purpose is to get…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
- Downloads
- 36
- Likes
- 4
- Rating
- 0
P
PrintablesMacronot
Coin battery holder 20xx
Coin holder for 10 20mm batteries. 20XX series.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesScott Gibb
20x20x20 Friction Right Angle Bracket
20x20x20 Friction Right Angle Bracket Summary This thing/printable is a simple three piece friction bracket used to attach 20x20 aluminium extrusion together. Its ideal when you don't have have the nuts and bolts to attach it using t nuts…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesFrankyD80
Face Dice Game Box - for 20x20x20 mm³ dice and 50x50 mm² cards
Holds the 4 x 4 = 16 dice with 20 x 20 x 20 mm³ and the playing cards with 50 x 50 mm² The Travelbox closes with a sliding.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
PrintablesValeriu
Microscope Objective Cover and Barlow Lens Support for Cheap Binocular 20x 40x PCB Microscope
This is an adapter for a cheap optical binocular Aliexpress PCB Microscope "Mobile Repair Professional Binocular Stereo Microscope Industrial Inspection Tool with LED Light" or "20X 40X Binocular Stereo Microscope PCB Soldering Mobile…
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesJellyTitan
Dehumidifier rod magnetic holder using 20x5x2 stick magnets
My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesBestia
shelf 220x78
Mój pierwszy projekt - mała półka na akcesoria.
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablespoostoon
Thor from Marvel Comics Fun Art Poster 20x20 cm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.32mm and the Actual…
Print approx. €5.20–€6.35 excl. taxPreliminary estimate for one variant
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printablespoostoon
Captain America fun art hueforge 20x20cm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2mm and the Actual…
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
Printablesderzoelli
XYZ Calibration Cube 20x20x20mm
XYZ Calibration Cube 20x20x20mm
- Downloads
- 7,002
- Likes
- 112
- Rating
- 4.89
P
PrintablesMilos V.
Rugged Box for 20x AA / AAA batteries
Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This boxes are designed for 20 pieces of AA / AAA batteries. Thanks for the nice design of the box. Print Settings…
- Downloads
- 3,489
- Likes
- 445
- Rating
- 4.85
P
Printablesdmdesign
Ender 3 V3 KE Bed Mesh Level Test (220x220mm - 5x5 Mesh)
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
- Downloads
- 3,213
- Likes
- 159
- Rating
- 5
P
PrintablesDoug Joseph (design8studio)
Drag Chain for CNC, two-piece, snap-open, 64mm radius, choose from two sizes: A=20x40mm, B=dual tracks, 20x26mm each (v1.14)
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
- Downloads
- 2,884
- Likes
- 343
- Rating
- 4.91
P
PrintablesShpooople
Square Baroque Ornamental Picture Frame (20x20cm)
The picture frame can be scaled easily, but remember to scale everything evenly. The backboard can be adjusted if you want to add a 20x20 piece of glass or acrylic glass. Supports needed. Make sure to disable support for the plug holes. I…
- Downloads
- 2,880
- Likes
- 572
- Rating
- 4.93
P
PrintablesEd
Core One Purge Bin - Clearance for Core One Nozzle Wiper - Remix 20x5x2MM Magnets
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
- Downloads
- 2,377
- Likes
- 475
- Rating
- 4.96
120x92mm oval base
Credit: https://www.myminifactory.com/users/Ravens
- Downloads
- 2,067
- Likes
- 18
- Rating
- 5
P
PrintablesEA3D
Aluminium profile 20x20
profile popular for building your own 3dprinter
- Downloads
- 1,955
- Likes
- 68
- Rating
- 0
P
Printables43D PRINT
Box 20x15x5 cm (no support no screw)
Box - outer max dimension 204x170x52mm - inner max dimension 196x146x50mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill 30%…
- Downloads
- 1,854
- Likes
- 511
- Rating
- 3
P
PrintablesNoctua_at
NA-IS1-12 Inlet Spacer for Noctua 120x25mm fans
The NA-IS1-12 is a 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
- Downloads
- 1,732
- Likes
- 291
- Rating
- 5
P
PrintablesHessenDnD
V-Slot 2020 20x20 Extrusion End Cap
Push in end cap for V-Slot 2020 Extrusion, 20x20 Extrusion.
- Downloads
- 1,696
- Likes
- 170
- Rating
- 4.75
P
PrintablesClessi
20x4 LCD Case | Arduino
Hi everyone, this is a case for a 20x4 lcd. It has an I2C on its back. As you can see the cables for the I2C going out on the left side. It has holes on its back to mount it where ever you want. Bring front and back together with screws.…
- Downloads
- 1,462
- Likes
- 86
- Rating
- 4.67
P
PrintablesYimmyTedeski
cable chain 20x25
Customized version of http://www.thingiverse.com/thing:1078216 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1078216 Instructions Using the following options: height = 20 width = 25 Type = 2 Round = 1…
- Downloads
- 1,227
- Likes
- 78
- Rating
- 0
P
Printables43D PRINT
Box 20x15x10 cm (no support no screw)
Box - outer max dimension 204x170x102mm - inner max dimension 196x146x100mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill…
- Downloads
- 1,226
- Likes
- 320
- Rating
- 5
P
PrintablesGhostPants
Ender 3, 3P, S1, S1P first layer test 220x220
Print layer height a .2 on printer to test first layer
- Downloads
- 1,186
- Likes
- 18
- Rating
- 5
P
PrintablesWalli
MKS DLC32 box for 2.4 LCD on 20x20 V-Slot
My Twotrees Totem laser was provided with a 8 bits board. I wanted to have autonomous laser engraver thus I switched for MKS DLC32 with low cost 2.4 LCD screen. This design will work on any 20x20 V-slot rail. I have used PLA as there is…
- Downloads
- 1,099
- Likes
- 59
- Rating
- 5
P
PrintablesThe_Trap__
Calibration Cube 20x20
Kalibrierungs würfel 20 x 20 mm mit angeschrägten Kanten um evtl. vorhandenen Elefantenfuß zu kompensieren. Calibration cube of 20 x 20 mm with chamfered edges to compensate for any possible elephant's foot.
- Downloads
- 1,024
- Likes
- 23
- Rating
- 5
P
PrintablesMatthew B
Prusa Core One Side Storage (20x5x2 Magnets)
I found it difficult to source the same 20x6x2 magnets that Prusa uses in the USA, so I remixed the side storage design to accept these 20x5x2 magnets (actual dimensions closer to 18.9 x 4.6 x 1.8 mm). Required hardware: 29x 20x5x2…
- Downloads
- 930
- Likes
- 333
- Rating
- 4.86
P
PrintablesMiguel Ceccherini
Cable clip for aluminium profile 20x20 mm V-slot 6 mm
They print quick and easy. They hold in place very well without any wobble or loose tolerance feeling
- Downloads
- 876
- Likes
- 96
- Rating
- 4.43
P
Printablesbjripp
20x20 Aluminium Extrusion Corner Bracket
60x60x20 corner bracket that will accept M3 screws. Prints flat without supports.
- Downloads
- 850
- Likes
- 178
- Rating
- 5
P
PrintablesDavid Fish
Lenovo Tiny M720Q M720X M920X Top Cover Chassis Lid with 120 or 140mm Fan Opening
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
- Downloads
- 836
- Likes
- 73
- Rating
- 4.5
P
PrintablesEng. Yehia
Hirth Joint for 20x20 extrusions
Just a simple Hirth joint that I've made, which was very useful and very rigid for my application. Category: 3D Printing
- Downloads
- 833
- Likes
- 136
- Rating
- 5
P
PrintablesAuzziebogan26
20x20x20 Calibration XYZ Cube
use this as your first test print to calibrate your printer
- Downloads
- 817
- Likes
- 16
- Rating
- 5
P
PrintablesIvanov Kirill
Profile pipe plug cap 20x20 and 40x20
Profile pipe plug cap 20x20mm and 40x20mm Заглушка профильной квадратной трубы 20х20мм и 40х20мм
- Downloads
- 763
- Likes
- 42
- Rating
- 5
P
PrintablesDima
Thinkcentre M920Q M920X M720Q 3D model.
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
- Downloads
- 763
- Likes
- 42
- Rating
- 0
P
PrintablesMarco
Flow Ratio Calibration Cube 20x20x20
This is a simple calibration cube to help determine the correct flow ratio. It is an exactly 20mm cubed solid shape. Everything below is based on a Bambu Lab P1P with a 0.4mm nozzle, but I would assume you can scale up/down to 0.2mm/0.6mm…
- Downloads
- 738
- Likes
- 27
- Rating
- 4.5
P
PrintablesKotiskoMiau
Test cube 20x20x20mm for snapmaker U1 to print with 4 color
The cube consists of four solids: the main solid is a 20x20x20mm cube that forms the body of the cube. The next three solids have cross-sections shaped like the letters X, Y, and Z. The cube was prepared for the Snapmaker U1 for a 4-color…
- Downloads
- 702
- Likes
- 73
- Rating
- 5
P
PrintablesSimonp1080
20x20 Extrusion PROFILE
USE CASES - printed v-slot extrusions - CAD design - shenanigans PRINTING INSTRUCTIONS - Forget infill, Max out wall number - lower your acceleration if your using a bed slinger or suffer from ringing - use a lower speed ringing sucks -…
- Downloads
- 591
- Likes
- 25
- Rating
- 0
P
Printablesjosepilar
DJI O3 Air Unit Cage 20x20 and 30x30 adaptor
Didn't like the idea of removing screws to mount the O3 air unit into a tpu mount adapter so I designed this case for the unit to sit on, it has 20x20mm and 30x30mm mounting holes, a channel to run wires under and a couple of braces that…
- Downloads
- 588
- Likes
- 30
- Rating
- 0
P
PrintablesLee David
Bed Level Grid Test for 420x420 Bed Kobra Max, Neptune Max
A simple test to verify corners and nozzle height. 9 test block, 50x50x0.1 set at 380x380 grid.
- Downloads
- 558
- Likes
- 21
- Rating
- 5
P
PrintablesMobot
20x20 Extrusion corner bracet for M4 screws
The original model 60x60x20, for M3 Screws, by bjripp is super good go check it out! I just made the holes lager to fit M4 screws with a cylinder head.
- Downloads
- 533
- Likes
- 123
- Rating
- 5
P
PrintablesLordDeno
HSW Holder 120x40mm
Honeycomb storage wall holder 120x40mm, to be used with a hallow insert for the honeycomb wall. No supports needed.
- Downloads
- 525
- Likes
- 104
- Rating
- 5
P
Printablesmathiasl
Corner Shelf 220x220
Liked the shelf by Pizzaman76 but wanted it a bit bigger so I made it 220x220mm
- Downloads
- 516
- Likes
- 62
- Rating
- 5
P
PrintablesJMack
Universal Server Rack Ear 20x20mm to 28x28mm
This is a universal server rack ear fitting 20x20mm, 24x24mm, and 28x28mm bolt patterns. I based this off of the Linksys rack ear but made it a bit more universal since my Cisco Switch required a 28x28mm bolt pattern. I also made the 3…
- Downloads
- 492
- Likes
- 49
- Rating
- 4.67
P
PrintablesJorg
M20x2.5 Bolts and Nuts
More Bolt Sizes! Feel free to send me a message if you have any special requests. Update Added Set Reset origin on each item Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.25mm Infill: 10…
- Downloads
- 490
- Likes
- 35
- Rating
- 5
P
PrintablesPhillip Skoric
Simple 20x20x20mm cube
Just a simple cube 20x20x20mm Print instructions Category: 3D Printing Tests
- Downloads
- 490
- Likes
- 5
- Rating
- 5
P
Printablesdmtinkdev
320x320 bed texture for PrusaSlicer
A basic bed texture to use with my voron printer (due to some mods, my effective print volume has been reduced to to 320x320). The grid has thick lines every 50mm and thin ones every 10mm.
- Downloads
- 476
- Likes
- 4
- Rating
- 5
P
Printablesjac_2307
calibration cube / cali cube / XYZ 20x20
The original XYZ cube looks a bit boring. So I made a redesign with some changes to make it look more interesting
- Downloads
- 465
- Likes
- 11
- Rating
- 5
P
PrintablesMiguel Ceccherini
Angle Bracket for 20x20 Aluminium Profile
Easy to print, don't need support.
- Downloads
- 463
- Likes
- 38
- Rating
- 5
P
PrintablesEd
Core One Purge Bin - Remix 20x5x2MM Magnets
A remix of @nicohirsch purge bin for the Core One, but using 20x5x2MM Magnets!
- Downloads
- 456
- Likes
- 79
- Rating
- 5
P
PrintablesMiguel Ceccherini
Cable clip for aluminium profile 20x20 mm slot 8 mm
They print quick and easy. They hold in place very well without any wobble or loose tolerance feeling
- Downloads
- 453
- Likes
- 31
- Rating
- 0
P
Printablesemtrax
2.5″ Cinewhoop (20x20 Stack)
This project was actually just for fun....but it ended up flying (unexpectedly) very well. All you need additionally are 14 pieces of m3 18mm nylon standoffs. My Configuration: Stack (20x20): Mamba F405 MINI MK2 + F30A, AKK FX3-Ultimate +…
- Downloads
- 446
- Likes
- 71
- Rating
- 5
P
PrintablesJamzy
Jonsbo N4 - Slim Front Fan Adaptor & 120x25mm fan version
Large bed only. (6/2/2025): added 25mm height fan model Print with support.
- Downloads
- 421
- Likes
- 17
- Rating
- 0
P
PrintablesPavel Kraus
Desktop organizer 220x160x100mm
Jednoduchý organizér pro cokoliv. Tento byl dělaný pro makeup, ale použít se dá jakkoliv. Ať slouží… v2 - Pro lepší tisk jsem nahrál části odděleně. A simple organizer for anything. This one was made for makeup, but can be used in any…
- Downloads
- 415
- Likes
- 51
- Rating
- 5
P
PrintablesGermanDarknes
20x USB Stick Holder
Holds up to 20 USB Sticks/Dongles with extra two trays for caps.
- Downloads
- 410
- Likes
- 35
- Rating
- 5
P
Printables3D-Muc
NEMA 17 mount for 20x20mm Alu profile
Simple, stable mount for a NEMA 17 stepper motor Easy to print as flat on front side Aluminum profile size 20x20mm 2 versions, longitudinal to the profile and transverse Category: 3D Printer Parts
- Downloads
- 408
- Likes
- 58
- Rating
- 5
P
PrintablesPhil Tomlinson
Modular 20x20 Air Filter
I got tired of the volume (sound and space) of my Corsi-Rosenthal, but wanted something that uses cheap and cheerful 20x20x1 MERV 13 filters so I came up with this. This air filter has not been performance tested and I make no claims as…
- Downloads
- 400
- Likes
- 124
- Rating
- 5
P
PrintablesHuỳnH HnýuH
20x20 cm Lego sorting tray
The LEGO Sorting Tray features multiple compartments, allowing you to organize bricks by size, color, or type, making it easier to find the pieces you need. Its modern design and durable construction ensure it fits seamlessly into any…
- Downloads
- 383
- Likes
- 38
- Rating
- 4.33
P
Printablesrolf_prusa_printer
Housing Display TFT ILI9341 320X240 (ESP32 /ESP8266)
Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…
- Downloads
- 377
- Likes
- 25
- Rating
- 0
P
Printableskwik
calibration cubes xyz (20x20, 30x30, 40x40, 50x50)
Test cubes 20x20x20, 30x30x30, 40x40x40, 50x50x50.
- Downloads
- 368
- Likes
- 9
- Rating
- 5
P
Printables43D PRINT
Box with handle 20x15x10cm (no support)
Box with handle - outer max dimension 204x170x112mm - inner max dimension 196x146x100mm Video with disassembly: Used screws: M3x8 4x 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls…
- Downloads
- 367
- Likes
- 103
- Rating
- 5
P
PrintablesFredator
90° V-Slot Corner Bracket for 20x20 Extrusion (No supports)
This project is a connector for v-slot profiles. It is a printable alternative to more rigid metal connectors (unfortunately often of poor quality). The model does not require supports, for optimal strength the print should be done as…
- Downloads
- 362
- Likes
- 45
- Rating
- 5
P
Printableschixxi
30.5x30.5 to 20x20 FC / ESC Adapter
I came up with this part to allow mounting of an 20x20 FC on a 30.5x30.5 ESC. If you need additional soft mounting print in TPU, otherwise go for ABS, PETG or even PC-max. The holes on the 30.5x30.5 side are for M3 screws. The Holes on…
- Downloads
- 351
- Likes
- 21
- Rating
- 0
P
PrintablesNairck
Prusa Core One Side Storage MOD for Larger 20x10x5mm Magnets
Refer to the original post for further model details.
- Downloads
- 350
- Likes
- 104
- Rating
- 4.88
P
PrintablesTraceParts
Profile 5 20x20, black
Profile 5 20x20, black More part numbers and CAD formats on www.traceparts.com/goto?Product=10-27122019-079340
- Downloads
- 350
- Likes
- 44
- Rating
- 5
P
PrintablesBasementLAB
Wall Grid Cover "Honeycomb Design" 120x120mm / 150x256mm / 150x236mm / Ø120mm
Wall Grid Cover "Honeycomb Design" - 120x120mm / 150x256mm / 150x236mm / Ø120mm - Griglia di copertura Nido d' Ape Resize/Scale to adjust dimension 03/01/2025 added Honeycomb Grid Cover Ø120MM 17/01/2025 added Honeycomb Grid Cover…
- Downloads
- 344
- Likes
- 50
- Rating
- 5
P
Printablessale723
Aluminium Profile 20x20x1000(500/400/300/200/100/50)
This are 3D models of a Aluminium Profile. This project was made in Autodesk Inventor 2021. There are different lenghts of profile, and you can choose what lenght you want. If there is a specific length required, pleas contact me and I…
- Downloads
- 342
- Likes
- 26
- Rating
- 0
P
PrintablesSabu8
Calibration Cube 20x20
Print it with arround 20% infill and mesure it after print. All the sides must be 20mm , if not, calibrate the specific false axis
- Downloads
- 340
- Likes
- 5
- Rating
- 5
P
Printablesmmuellerphoto
Cable Channel 20x30, 30x30, 40x30, 50x30 - Different Length
Cable Channel: - 20mm x 30mm, 20mm up to 320mm length in 20mm increments, 20mm Clip - 30mm x 30mm, 20mm up to 320mm length in 20mm increments, 30mm Clip - 40mm x 30mm, 20mm up to 320mm length in 20mm increments, 40mm Clip - 50mm x 30mm,…
- Downloads
- 335
- Likes
- 100
- Rating
- 5
P
Printablesneurocean
Corsi-Rosenthal Air Filter 140mm PC Fans 16x20x1" Furnace Filters
Adding 5x 140mm fans with two 16x20x1 filters, giving it a large surface, makes noise levels virtually undetectable when running at max 12v. I made 3 of them so far. If I was to change something it would be to replace the panels screws…
- Downloads
- 330
- Likes
- 73
- Rating
- 4.8
P
PrintablesKuzzy3d
Ender 3 V2 20x20 Extrusion End Cap
Made to fit Ender 3V2 but should fit any 20x20 extrusion. my need slight filing or sanding on posts as it is a pretty tight fit. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20…
- Downloads
- 329
- Likes
- 17
- Rating
- 5
P
Printablessahmed1o
20x20 Aluminum Profile
20x20 Aluminum Profile converted from CAD files for 3d printing, works well with ABS and PETG ---------------------------------------------------------------------------------------------------------------- Welcome to my Page. If you…
- Downloads
- 329
- Likes
- 27
- Rating
- 0
P
Printablesmachinekoder
HEPA Filter H12/H13 (FC8038/01, 150x120x25mm) + Activated Carbon Filter Housing for 120mm Fan
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
- Downloads
- 324
- Likes
- 58
- Rating
- 5
P
PrintablesHologos
Battery organizer (20xAA, 20xAAA, 2x9V and 4xCR2032)
This is a custom made battery box organizer for 20xAA, 20xAAA, 2x9V and 4xCR2032. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 (you can use 2 but the sides flex a little when you push) Top layers: 4 layers Infill: 15%…
- Downloads
- 317
- Likes
- 49
- Rating
- 5
P
PrintablesJamie Turner
creality k1/k1max side fan grill/Blower fan 120X32MM
Updated: Now including a version to use pc fan screws to attach the grill to the side fans screws are 5x8 self cutting fan screws Description: The Creality K1/K1MAX side fan grill is a meticulously designed component featuring a fine fin…
- Downloads
- 317
- Likes
- 46
- Rating
- 5