Meshtastic Heltec Vision Master E213 case
Remix of ddanijell’s case for the Heltec Vision Master E213. The slim back cover fits a 2000mAh 103450 battery, and the thick one is for dual 18650s.
- Downloads
- 623
- Likes
- 61
- Rating
- 5
128 models
Remix of ddanijell’s case for the Heltec Vision Master E213. The slim back cover fits a 2000mAh 103450 battery, and the thick one is for dual 18650s.
brick model of wall-e you can also size it to your need
This model is compatible with the lego system.
Compatible with: Extruder: M3213 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10S Pro V2 and CR-10 Max Hotend: Micro Swiss All Metal Hotend Hotend Fan: 4010 Part Cooling Fan: 4020 Blower Probe: BL-Touch 3D Printer Model: CR-10S…
Originally published here: Motorola Moto G60 & G60s xt2133 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models' materials are not interchangeable , so pay attention…
V1 was deleted because of file errors but this is V2.1 - Now with a Left foot option! I broke my G213 foot after an intense night of gaming... So I provide to you a 3D printable measured with precision to OE specs, I've been using this…
******Remark (updated on 29 Nov 2025). There are two “versions” of the Heltec E213 board. Though not officially indicated by Heltec, i start to notice this when users feedback that the type C port positions are different since sometime in…
Disclaimer: These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family members, friends and make the devices and give away the…
I wanted a box to store the DS213 pocket oscilloscope that had the same size & shape as my TS101's box. I also made a stand, this can fit under the probe tips, it prints in one piece mostly, but there are two small “cubes” that can be…
This model is compatible with the lego system.
This model is compatible with the lego system.
Nachdem der Fuß meiner Tastatur gebrochen ist habe ich ihn nachgebaut
The BMW model is decently heavy, so make sure you use some kind of drywall anchor if you're not able to screw the mount into a stud. The hook grabs onto the oilpan of the motor between the two lower black aero farings.
Oryginalny model od destjus Bestia jest wygłodniała… to znaczy wygładzona… Chodzą plotki, że drukowanie zawsze zajmuje 21h i 37minut niezależnie od ustawień druku i skali, drukarka zacznie grać Barkę po zakończeniu wydruku. Druk można…
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
Heres a standard credit card size model with a recess for a 25mm NTAG213 NFC. Useful for giving contact details, wifi credentials or just straight up trolling. I used NFC Tools app to read/write these tags.
A clip to mount a PCT 212/213/215 Terminal Block horizontally and vertically. I have tested these with generic PCT terminal blocks but they should work with the WAGO 222-412/222-413/222-415 as well. Printed using ABS but PETG should work…
I shortened the original 3rdpig design by 3mm and changed the threading to 1/4-20, because 'MERICA! and 1/4-20 bolts are a lot more common here in the states than M6. Cases cut without turning the setscrew in came out at 1.386", and after…
This is a replacement part of the Mercedes W213 Wagon Trunk/Boot luggage compartment hinge (plate cover under the trunk carpet where the first aid kit, triangle etc. is stored). I had one already broken and broke the other one wery…
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
3D printable keycap replacement for Logitech G213 Prodigy keyboard. Good for making custom keycaps. Fits any regular keys. 3 different sizes included.
Printed of PETG, with supports. Spare vacuum bag holder Philips VC-H4213E-14
These gears can be found in the following (but not limited to) consoles: SEGA/MEGA CD1 PC Engine Super CD-Rom2 PCFX Neo Geo CD (Frontloader) Amiga CD32
Das ist jetzt quasi Version 3 der Becher für den Cupholder. Ich habe sie von daher verschlimmbessert, das ich den Boden an der runden Ecke etwas angehoben bzw. abgerundet habe, Jetzt kann ich mit meinen Wurstfingern auch eine Münze oder…
made for the following: https://www.printables.com/model/1251061-corsi-rosenthal-air-filter-140mm-pc-fans-16x20x1-f noctua says this is better used as intake, but having no problems with putting it on the exhaust side. there is slight…
Simple and cute quick printing case for the Heltec E213 eInk node. There's even a little room for a battery if you're so inclined. Whipped this together for my desk and though I would share if anyone else with the same node wants it...…
Its a box to catch plastic waste. Insert 2 magnets into the slots. put 2 more on the outside of the box and attach foam tape to those magnets. Gently push against the side of the printer to align the mounting magnets. Includes design file.
If you have your Saturn V hanged on wall - try put there also moon lander :) Skechup file included - feel free to remix and share :) Consider tipping me if you are satisfied with my design ;) Print Settings Rafts: No Supports: Yes…
I have lost the right feet from my keyboard. This is a replacement part for the right side. You can mirror the part to fit it on the left side (not tested).
Halterung Kryptonite 2130 Evolution Da sich die original Halterung ständig löste, und ich sie öfter wieder festziehen musste, habe ich eine eigene entworfen. Zudem muss ich das Schloss nicht mehr entriegeln, und kann es mit einer Hand aus…
Originally published here: (WIP) Motorola Edge 20 Lite xt2139 case by tato_713 - Thingiverse This is a work in progress, the case could not fit on your phone. This case was designed for the Samsung S20+, including the 4G and 5G versions,…
Simple wire brush holder for a Hazet 2131 wire brush and others. The inner diameter is 12mm. What you need: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts for Ikea Skadis Pegboards system from…
More space for your DS213. I found i very hard to fit everything in the original design, so i made a bigger box. It also fits every additional equipment and the manual. This is a remix of the orginal:…
Its just a 3D Scan from a Mercedes ISOFix Blindplug in the W213. Not a perfect, but a working version
Cable bracket so you can easily attach the cable to a pipe. RG213 version and a RG58 version. PETG 40% infill No support in holes for Cable ties.
If you lose your Marklin 321360 crane support. Choose which you like the moste.
A very close aproximation of the Heltec Vision Master 213 for modelling purposes
Same BOM as on Github, wiring on the right, to be attach on the outside of the 2020 extrusion.
Saeco Philips 2200/3300/4400 EP2121 EP2136 EP3146 EP5144 EP2124 Lid. You can find bean extentions but no one modeled the lid. I needed a replacement after mind cracked
Coin that fits the Lego minifig vending machine (21358) . Given that the coins included in the Lego set have a high likelihood of getting lost and use rather uncommon parts, I figured making some spares would come in handy soon or later.…
A wall hook for LEGO 42137 (Porsche 99X Formula E) Print with back of hook on build plate, use tree supports!
This is a replacement for part number A2056800691 and therefore, compatible to Mercedes W447 (V Class), W205 (C Class), W213 (E Class) and W238 (E Class). Detailed instructions will follow later. Here are some remarks as first aid :D As…
ARTE&DISIGN GT213 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Hikvision base, one tilted by 14°, one normal. With hole for a PG16 grommet for ethernet cable. Included small grommet/end cap for microphone cable, if you have "-IS" version. A low ring is for testing. Layer 0.25mm, Nozzle 0.4mm, Infill…
These are some better-looking rims for the Lego Technic Ford Bronco (set #42213). They are based on the OEM wheels shown on the product box. There are two versions, one with the axle covered and one with the axle open.
Adapter for e30 HVAC panel that allows the factory radios to be flush rather than protruding slightly
A fairly simple dock for the Ugreen Revodock 213 for the Secretlab Magnus (Pro) It's designed to repurpose the M5 Screws in the legs of the desk. I have a fairly long hex wrench, so I made the screw holes are open at the bottom of the…
Vision Master E213 ESP32-S3R8 LoRa Development Board SX1262 Chip with 2.13" E-Ink Display LoRaWAN BLE 5.0 WiFi Compatible with Arduino LoRa Meshtastic IoT(902-928MHz). I was looking for a case for the Heltec E-213 Vision Master that was…
In humid environments, the springs inside the dual-flush buttons for Caroma toilets can rust, causing the buttons to stick in the down position. This model is a replacement of the entire push-button assembly that can be used in place of…
Standardizing tool organization in my shop with Skadis pegboards from Ikea, and needed a mount for Grandstream GXP2130/GXP2140 phones. Printing with Skadis pegs against the build plate and Cura tree supports created an awful cleanup…
This model is compatible with the lego system.
This is the interior part for a E21384 bay window lock (the pins break too easily and don't close the bay). We replaced this thing by another one that cost him almost 30€ and broke again in less than a year. So i tried to design one a bit…
very simple and small mount for HBVcam 5m2134 v11 there are two version of cam mount simplified - consists of profilepart, camholder 22degree angle fixed - one file
If you leave a fridge or freezer sealed shut for weeks in storage, it goes musty and mouldy. Most campervan fridge doors have a built-in "vent" catch that holds the main door slightly open for exactly this reason — but the internal…
Einhell Miter Saw: https://www.einhell.nl/en/p/4300390-tc-sm-2131-2-dual/ Maybe also applicable for other types. Part: https://www.einhell-service.com/nl_NL/430082002906.html Printed in PETG with 6 walls to make sure it's strong enough!…
i wanted to make a it a little cool so went with transformers
This is an adapter plate to connect standard 17mm ball mounts to ProClip vehicle mounts. I made this specifically for the 213492 vehicle mount but the holes should line up on other mounts.
Made by me in SketchUp 2017. I really like these drawers, but they only come with one set of dividers. I have their other stackable units with the moveable trays and I wanted the best of both worlds. The sides, front, back, and middle…
If you leave a fridge sealed shut for weeks in storage, it goes musty and mouldy — and the freezer compartment inside is even worse, because it stays shut and stale even when the main door is vented. This is the two-in-one version of my…
Supports needed. Category: Vehicles
Before I start - yes, I do have a wall-mount version on the way! Secondly - yes… my OE model is very very dusty… This one works very well. Print as many of these are you'd like - more = more support. I went with 8 in total. Clip them into…
Printed in PETG Nozzle Ø: 0.4 Layerheight: 0.25 supports needed for the T-slot connector and the bottom hex cutout
Wall mounts for Lego sets: 42138: Ford Mustang Shelby GT500, 42137: Formula E Porsche 99x Electric 42204: Fast & Furious Toyota Supra MK4. Allows the model to be mounted on any flat surface in practically any position, including the…
Description Horizontal display stand for the LEGO "Tintin's Rocket" set (21367). The stand's feet fit tight enough to hold the model in place without any glue. The horizontal stand allows the rocket to be displayed 3 cm off the ground.…
Follow plug tool for cross-style lock cylinders. I used this for a Prime-Line GD 52139. Remove retaining ring, insert key and turn 45 degrees, insert follow plug into cross hatch, push tool against cylinder to remove from the cylinder…
Custom W213-inspired front bumper side intake for Mercedes-Benz W212 E-Class Facelift Sport models (2013–2016). Printed in PETG using 0.2 mm layer height, 15% infill, and a 0.4 mm nozzle. I used manually painted supports only on the…
Hi all this is a case for the Visionmaster E 213 with a small footprint practically as small as I could get it! Note you might have a problem with the fit of your particular antenna and battery which is why I included the fusion file as…
Parts Required INIU WI213 Magsafe Charger 8BitDo Mobile Gaming Clip for Pro 2 8bitdo Pro 2 Controller Rant I know it's super niche, but that's what 3D printing is for right? Took me 7 attempts to get the fit right for the Magsafe Charger…
These pieces are for making molds to repair broken ceramic (porcelain) insulators in the ballast resistor of an obsolete Hobart welder-generator. I used these on my G-213 but they likely fit other models. Original design used 9 pieces, my…
There is enough space so that the dock can be removed when the holder/bracket is fastened. 4 Screws are needed .
I wanted to be able to showcase the carriage interiors, so I designed a simple wedge that props the roof open for display. There are no additional requirements besides lifting the roof and installing the wedge between the existing bricks…
Printed with 2 walls Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.2 Filament: N/A PLA Category: Kitchen & Dining
I wanted to put my D11 into a rugged case so this is the insert to make that happen.
A mount for 2 x PCT-213 for the Ender 3 NG v1.2 Toolhead for those who do not want to solder the connectors. I'm using it with an EBB36 to run 2 part cooling fans off 1 fan port. The other fan port is used for the toolhead fan.
trim .308 Winchester or 6.5 Creedmoor for resizing to 8.6 Blackout Suggest printing in orientation shown for best results Blender file included Category: Hand Tools
A simple backplate for the Waveshare aluminium heatsink (SKU: 21308) compatible with Raspberry Pi Zero and Zero 2.
A bean hopper for the Melitta Fully Automatic Espresso Machine E950–213. It allows you to add way more beans to the machine. The original lid is re-used. I suggest to only print and use this if you have lots of traffic on your machine, as…
Tight fit bracket for Logitech Z213 volume control. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Creality PLA White Category: Organization
This is a brake gasket set for an Aprilia Tuareg 50 motorbike. I designed this gasket set because a brake cylinder rebuild kit is not available. This kit is for a hand brake rebuild. The parts have to be printed with NinjaFlex or a…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Key Features: Self-watering screen disk separates the…
LEGO Vending Machine coin (for set 21358) any material is ok
Standard factory mount for this lamp is so bad - so i made that GoPro type mount PETG - recommended (due to outdoor environment) My design GoPro Mount Used: https://www.thingiverse.com/thing:3515125 GoPro Base designed bymark133:…
Wall mount for Lego 21322 Pirates of Barracuda Bay ship. Two brackets required. Perfectly holds the ship away from the wall, while still allowing it to be easily removed. May be compatible with other lego ships with a similar footprint.
A simple shelving unit for storing the 24 packs of gel pens included in the languo 213 pen box that went viral online. Gel pens should ideally be stored horizontally so I wanted a solution where I could see the coloured lids of the pens,…
Just a mini Papaj Booknook - this one was done on request of a friend. If anyone would want diffrent ratios - feel free to comment, i'll probably make it in spare time.
Pretty stable and rigid alternative to a 10$ of piece of plastic.
Lego (11213) Plate 6 x 6 Round with Hole
Also available on my website .
Print all the parts, I used PETG. 2 StandArms are required Will require 2 M5x16 socket head screws, washer and nut sets for the pivot. Will require 4 M4x8 button head screws for the monitor mount. Press the M5 nuts into the stand arms.…
I'd recommend checking to make sure that the USB connector is fitting flush, my card had cold solder joints and was becoming bent.
I upgraded my AM8's electronics stack from an Arduino Mega to a Re-ARM a while back.* The Re-ARM doesn't connect anything to several of the AUX2 pins, so the usual approach to run TMC2130s is to commandeer the pins for the Ethernet…
Many of the clearances are designed as interference fits. An Onshape link is provided to allow you to modify the tolerances to your preference, accommodating slight variations in cell types. The shell should be printed as a solid part by…
ORGANIZZATORE GT213 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
This is a remix of the original display mount design by @HARTK1213 for the Micron R1. This will allow you to use a BTT 4.3-inch display HDMI version with USB touch on the current R1 printer. Print Settings: Standard recommended settings…
Display your LEGO® Starry Night securely without drilling holes in your wall or modifying the set. This low-profile wall mount is designed to work with the factory mounting point on the back of the LEGO Art Starry Night set. A…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Replacement Grandstream GXP2135 Phone Hook. Printed in PLA with no supports.
Container / Housing for an LPC21350 battery that I pulled out of a disposable vape. It is simply to ensure the bare cell isn't exposed to the elements completely.