Counting matching models…
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
The rugged box measures 110mm x 220mm x 75mm, providing a durable and practical storage solution. Designed with integrated slots for metric nuts, it ensures secure assembly and enhanced functionality. Its compact size and sturdy…
A shallower remix of my Triple Shelf with Honeycomb Storage Wall Sides 220mmW x 150mmD
I slised off the boat house and most of the rocks to fit my needs. I like being able to print the castle bigger.
Smaller remix of my Triple Shelf with Honeycomb Storage Wall Sides 320mmW x 150mmD
Note : it does not work on the 230mm version. See the commentary section. 10/03/2025 : v8 raised version got an airflow improvement after beeing water tested v9 same airflow for non raised model. 03/05/2024 : v7 add a raised version, 7mm,…
I could not find long enough support for my bed, so I designed one. It has holes for 4mm screws. It was designed to be about 200mm but it can be adjusted from ~155mm up to ~230mm (not much thread left there so be careful). I originally…
This 3D Model is always helping me out even if i use a Bed Level Sensor to get the perfect first Layer. You can Stop the print after the First Layer its just heigher for better view. Filament: PLA, PETG, ABS, ASA Layerheight: 0.2mm
220mm fan replacement. Shaft diameter 6mm/8mm. Printed from PLA.
Someone asked me for this size and I thought it would be a very interesting exercise to try to make a 380mm circumference that can be printed on a 220mm bed. And, it came out great! Pretty straightforward, similar to my other lazy Susan…
Replacement wing strut for the FMS Ranger 1220mm. This is nearly the same as the OEM strut save for a small flat spot that should be oriented down towards the bed. Supports are necessary for the two small protrusions that connect to the…
Music stand tray: High: 67mm Lenght: 220mm Depth: 55mm Brim: Yes Supports: No Resolution: 0,2 Infill: 20% Wall: 3 Wall thikness: 1,2mm Filament color: Black Filament material: PLA
Prevent the automower from digging ruts in your lawn. Printable on a 220mm square bed. This is a remix of a excelent design by polandmet so that it would print on my 220X220mm bed. https://youtu.be/YmMLucwmtG8 Each wheel prints in 4 parts…
Simple Bed Levelling STL for Ender 3 Pro / Voxelab Aquila (220mm x 220mm) The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:…
rugged box mm*220mm*130mm*70mm (low profile), better clamps at least for me, and lower profile
I made the Modell longer for : Victorinox "Tomato and table knife" 220mm Print in stl file orientation ! Printer : Flsun V400 Walls 4; top 10 ; bottom 10 layer height : 0,1 line width : 0,4 infill 25% ; no support ; print time ~ 1,5 h…
GoPro Mount for STEELE 5 220mm fpv frame.…
Hallo Zusammen, ich habe hier ein Bambu Logo auf ein Skadis Board gebracht (leider ist die Platte beim lösen beschödigt worden!). Die Farben sind einstellbar. Viel Spaß damit
Thank you for downloading my product Your feedback is crucial to the further development of this product. Could you please share your thoughts with me? What works well? What could be improved? Any input is greatly appreciated supplies:…
This is my first design where i wanted to make a product better than i could buy in the store but that most people could print on their own 3D printer. The paint shield has been designed with the following features: -Razor Sharp Paint…
This is a completely remodeled 220 MM version of the flat printing disc, you'll probably need the Cheater adapter from the original. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category:…
Modified the existing design created by @SteveHanov to fit on a 220mm x 220mm by rounding the outline. The required postal dimensions were retained, so the model still works. but some of the extra material was removed. The model needs to…
All sides are 3-4 perimeters thick and it has a reinforced brim, so it's extra sturdy.
Distance roll four multi purpose, e.g. for PCB mounting. Print with any material and any layer thickness. Please report missing sizes, so I can add them. Please find the fitting screws here:…
The first version I uploaded was 207mm wide. On my Ender3 v2 it would not slice. I changed the print bed size, it did slice then, but one side was not able to put the brim down correctly. I squeezed everything tighter and was able to get…
This is the same thing as D6ta's Nespresso capsules holder, except I've lazily chopped off the ends so that it will be printable on my Creality Ender 3 V3 KE, which has a 220mm x 220mm built plate. It still works exactly the same, though…
I printed with tree supports for the pins, at .2mm height and .4mm nozzle. The pins are 5.8mm and fit snuggly in my pegboard wall.
This is fixed, remeshed strap for RC3 mask. It enables wearing Europa V3 short version for wearers up to 60+cm of head circumference. Print time for single is about 13min. 0.4mm nozzle, 0.25 layer Noctuo PETG Medical. Presented 3mf file…
Drone foot for STEELE 5 220mm fpv frame. need to print 4
About: Remix of 3 GoPro Extensions Strong Ends by tmorris9 . took the longest one and then extended it length between screw holes is 220mm printable on Prusa Mini+ diagonally total size something under 234mm Please give a like and post…
Wall loop: 3 Sparse Infill Density: 20% Infill Pattern: Gyroid
I wanted to have a very solid but lightweight and yet simple fpv race copter frame. This frame is incredible durable. This frame has even withstood several hard crashes so far. The frame may not be as light as a carbon frame, but the…
Parts are not oriented, I'll let you play with that in your slicer The larger piece does fit flat on 220x220 (longest length is 215mm) check original post for more info, and/or want to print it as a single piece…
Corner profile 45dgr for 2020profile, 220mm long
Hallo Zusammen, ich habe hier das BVB Logo ergänz. Viel Spaß damit.
Hallo Zusammen, ich habe hier das FC Bayern München Logo ergänzt. Viel Spaß damit.
This wall/post/fence mounted holder will allow you to store hoses of even 100ft (33m) length even when full of water. It will need two screws of 50mm length (I used 2.5" screws). The photo is of a holder printed in ABS.
My version for a filament spool infinity tower with SUNLU 3rd Generation spools in mind, but not restricted to them. For printing on the Flashforge AD5X / Plate printing size 220mm x 220mm, which includes a top cover and clips ( 2 / Base…
Each link is 25x10mm with a diameter of 2mm.
//_UPDATE_// In putting together everything I found out that the umbilical plate that I originally put on was the smaller one. There are several different options for the plate. Ultimately there are 2 sizes and many options for what cable…
Malla skadis preparada para impresosas de cama 220mm x 220mm tipo ender 3 o similar. los separadores son de 7mm de alto. se puede modificar desde el laminador el alto
A remix of two models which combine into a simple way to attach your camera to your RC FMS 1220mm Ranger V1 or V2. The first model is the insta360 Go2 camera mount found on Thingiverse: https://www.thingiverse.com/thing:5346685 The second…
This version of Victorinox knife sheath is for "Tomato and table knife" 220mm Victorinox - Tafelmesser - Tomatenmesser
Schachtel mit Deckel. Abmessungen Innen: Länge 220mm, Breite 150mm, Höhen von 30mm bis 150mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Internal dimensions: length 220mm, width 150mm, heights from 30mm to…
Edited the height of each module connector so they would fit into a 220mm build area printer. Ran into a slight issue of some filament spools being too tall to fit in-between the filament support rods. So I edited the filament support…
3D Printable HEPA Air Purifier This is a simple, effective, and easy-to-build air filtration system designed for anyone who wants to build their own home air purifier using 3D-printed parts and readily available components. The design…
Similar to all my other headless ukulele designs, but meant for folks with printers with maximum 220mm in Z-axis. I haven't printed this yet, so if you did successfully, please link your make here. This comes in 3 pieces to be glued…
Hallo Zusammen, ich habe hier ein Fortnite Logo ergänzt. Bei dem Foto war leider die Anzahl der “Unteren Schichten” noch auf 3, ist aber im File auf 4 schon geändert, so das der Fehler nicht mehr auftreten sollte. Viel Spaß damit
"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…
Remix of the remix of the gear board to fit on the 220mm printer bed
"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…
"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…
A shorter base for the Ultimate router jig. Allows printing on 220x220mm Print-beds.
FrSky R9 Slim and Slim Plus mount for 220mm frame Category: R/C Vehicles
I did some changed some things from the original model, mostly for static reasons and also to reduce the amount of different parts. Use of 6×3 mm magnets instead of 5×3 mm. Standardization of parts so that fewer different components need…
I damaged the roller ring in my microwave when attempting to clean it. I modeled this part to replace it. Compatible with a number of microwaves from Sharp, Panasonic, Sony, Electrolux, etc. I'd recommend printing this in ABS as it's more…
220 x 116 x 9.917 mm [Outer Dims] 194.60 x 163.40 mm [Plexiglass Insert Dimension] 182.6 x 152.6 mm [Innermost Dim] 212.80 x 173.80 mm [Cutout Required Dimension] 1.50 mm [Bezel Thickness] 8.42 mm [Thickness Minus Bezel] No dimensions…
DE: Mein Model einer 30x30 Abschlusskante mit der Länge 220mm. ENG: My model of a 30x30 edgeband with a length of 220mm
Wanted to print the Bestagon midpanel but it wouldn't fit on my aquila with room for a brim. Split in half and added the Logo for asthetic reasons. Made it a bolt on connector using M3 screws. Designed in Tinkercad so my measurements were…
I remixed the excellent Filament Guide for IKEA SKADIS by Tim to create a ~220mm version with a brace. This guides the filament away from my MMU and printer frame on the table below the SKADIS.
DE: Mein Model einer 90° 30x30 Abschlusskante mit der Länge 220mm ENG: My model of a 90° 30x30 end edge with a length of 220mm
The "Large" bin @s7emar published was not fitting my Ender 3 build plate, the "Medium" bin was not big enough. This model include a 210mm bin and a 220mm one, you are able to fit two bins in the Ender 3 print bed. Print settings: Infill:…
Fits on Anycubic Kobra 2 pro print plate, 220x220mm.
Print with your favourite settings and paint for the best effect.
ImmersionRC Tramp VTX mount for GEPRC LX5 Leopard 220mm frame.
scale for using in Nomad Sculpt, 220mm xyz scale, it's not numbered, if you print it drop a comment telling me what settings you used!
Repelente para gatos hexagonal
HOBBYWING XRotor VTX mount for GEPRC LX5 Leopard 220mm frame.
HE3D K200 220mm Bed Mount Top/locking mechanism will be uploaded shortly Category: 3D Printer Parts
This is a player board to hold the cards, ships, outposts, fortresses and plastic order tokens. gaminggeek241 (from youtube) https://www.youtube.com/@gaminggeek241 has requested someone to try to make a compact version that holds all the…
VTX and VTX antenna mount to 220mm quad Category: R/C Vehicles
Illuminated Display Case for 3D Models – V2 (250x220mm) This display case is designed for the aesthetic presentation of 3D printed figures, human models, and manga characters. Compared to version V1, the following modifications have been…
Small computer monitor riser. Dimensions: L 220mm x W220mm x H150mm Instructions: Print with top facing down on the print bed. This makes it so the riser doesn't need supports.
CHOPPED A SMALL AMOPUNT OFF SO IT CAN FIT A PAIR ON A 220MM X 220MM X 220MM PRINT BED.
Cet objet est destiné à ranger des plateaux de 220mm par 220mm à l'horizontal ou à la verticale avec un couvercle. Le couvercle est le deuxième fichier. Les problèmes de tolérances sont réglés. Impression conseillée en PETG à la verticale…
Brush and purge bucket stand for the Voron Legacy when using a 220x220 bed. The purge bucket is set with magnets so that it's easily emptied. The brush is held down with double sided tape that unattaches easily, so the stand has holes in…
It's a thin rounded rectangle with a border. Print in flexible filament and it's floppy. You too could 3D model this in under 5 min in over 20 different CAD programs. But alas... I liked the Flexible TPU work mat design by revoxsvko but…
🛡 The Ultimate Tech Armor for Students, Teachers, and Commuters! Throwing your expensive laptop into a backpack shouldn't feel like a game of Russian Roulette. This heavy-duty, shock-absorbing hard case is designed to keep your mobile…
Modular A4 Honeycomb Paper Tray A modular A4 paper tray inspired by the Honeycomb Storage Wall (HSW) system. Designed to be printed flat, without supports, and assembled using HSW connectors. Features 3 versions: 1, 2, or 3 rows of…
//_UPDATE_// In putting together everything I found out that the umbilical plate that I originally put on was the smaller one. There are several different options for the plate. Ultimately there are 2 sizes and many options for what cable…
This is a REMIX of the Stackable Containers by Bndzi. It was resized to 160x220mm
Cet objet est destiné à ranger des plateaux de 220mm par 220mm à l'horizontal ou à la verticale avec un couvercle. Le couvercle est le deuxième fichier. Les problèmes de tolérances sont réglés. Impression conseillée en PETG à la verticale…
Brush and purge bucket stand for the Voron Legacy when using a 220x220 bed. The purge bucket is set with magnets so that it's easily emptied. The brush is held down with double sided tape that unattaches easily, so the stand has holes in…
Illuminated Display Case for 3D Models – V2 (250x220mm) This display case is designed for the aesthetic presentation of 3D printed figures, human models, and manga characters. Compared to version V1, the following modifications have been…
Edited the height of each module connector so they would fit into a 220mm build area printer. Ran into a slight issue of some filament spools being too tall to fit in-between the filament support rods. So I edited the filament support…
10" 2U minirack base model for chassis of such characteristics. I personally used it for the front and back parts of a NAS I am building (TODO: upload to printables and share it here) It can be printed with the cover facing the bed at a…
Wanted to print the Bestagon midpanel but it wouldn't fit on my aquila with room for a brim. Split in half and added the Logo for asthetic reasons. Made it a bolt on connector using M3 screws. Designed in Tinkercad so my measurements were…
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 20mmx20mmx0.2mm squares in a 4x4 grid with 2x200x0.2 lines connecting each grid element to provide whole…
Quick calibration test net for bed level check. One layer - 0.2mm layer height.
LIGHT BOY S FULL ATX PSU SINGLE FULL PCIE Every piece as been remodeled from scratch for a 220mm x 220mm bed size. 0.3mm tolerances. (loosy goosy for the lazy people, like me :) ) Accommodates 2x 120mm slim 15mm height fans located on…
This is a REMIX of the Stackable Containers by Bndzi. It was resized to 160x220mm
10" 2U minirack base model for chassis of such characteristics. I personally used it for the front and back parts of a NAS I am building (TODO: upload to printables and share it here) It can be printed with the cover facing the bed at a…
