Counting matching models…
This model is free, please donate to one of Ukraine's relief efforts instead: https://donate.redcrossredcrescent.org/ua/donate/~my-donation?_cv=1 https://news.un.org/en/focus/ukraine/donate https://www.comebackalive.in.ua/ Model…
9mm Rugged Ammo Box Collection (50x, 100x, 150x, 225x, 396x) This is a remix of the Rugged Parametric Box by Whity, adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source files for…
An airgun silencer, model supplied for 22 calibre, with an expansion chamber and K-type baffles that prints without support. Particularly useful for silencing CO2 and pneumatic airguns, designed for the Crosman 2250 “Ratcatcher.” Firearms…
This model is compatible with the lego system.
Wall Support / Mount for Tapo C200 C210 C211 C220 C225 TC70 TC71 WIFI Security Camera Compact upside down wall hanger wich uses original Tapo support (replacement available in the files) 8 holes = 4 positions (set the origin of the cam)…
I would be very happy about a Make, Like or Share! Happy printing!
I was strongly inspired by the work of @sacrilegor, I even wanted to use its upper insert of the Gridfinity box, but I had a problem with the central hinge of the Dremel box. So I had to remodel the top insert in order to gain the few…
After receiving a second hand TP-Link EAP225-Outdoor access point, I discovered that the original wall mount bracket was missing. The design has a low profile and no locking mechanism. Print wall-side down, no supports required.
Ich lade hier das Model einer Hager Verschlussschraube VZ225N des Ersteller nyyotam von thingiverse hoch. Beim Aufbau meines Unterverteiler sind mir diese Verriegelungsschrauben abgerissen und wenn man den Neupreis der Schrauben im…
This model is compatible with the lego system.
It is a hideout for hamster or other small pet. Quick project that can fit to the standard 225x225 printer
Replacement part (Pillar) 30225762 for Playmobil 5568 This part is not available from Playmobil anymore. Can be printed with PLA but I recommend PETG or ABS/ASA for more stability. Print in 0.2mm or thinner layers. Prints with no supports…
A rugged storage case, 225mm x 125mm x 75mm internal volume. Print in materials of your choice, though the gasket should be a soft material, such as TPU. The corner bumpers can be printed in TPU or a rigid material, and secured in place…
This is a remix of the excellent VESA 100 spacer created by FredCo as the original was a bit too small to fit into the back of the my Dell/Alienware AW3225QF and allow fitment to the mounting bracket. This remix is 13.4mm deep - the…
I wanted a decent scope on my Crosman 2250b Ratcatcher so made this. It holds in place on with the force of the scope clamp being tightened and I've had no issue with mine for years.
Mod/extension for the Rook 180 by Rolohaun , based on the idea of Kanrog , who had the brilliant idea to extend the size of the Rook180 ( Rook-235 & 225 Mod ), now you can also extend the Rook 180 TURNED (mod by WoodKnight). The Rook 180…
M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo
This adapter gives you more room to mount a TP Link EAP615 to a wall outlet. It is designed for M3 brass inserts. You need 2x m3 inserts and M3 screws, to mount the bracket from the Accesspoint. The Screws to screw it on the wall outlet…
I wanted to see if i could extend the Rook to fit an Ender3 bed. The Z rods can be kept stock, or use longer ones for a higher Z. With 450mm rods on Z, the z volume is 280mm X and Y uses 8x360mm rods. Note: If you have the Rook 180 TURNED…
These parts are for an Echo SRM225 trimmer. It is the choke lever and the choke flap. These parts have been slightly modified from the OEM parts. You will need to remove the factory pieces completely. You will need a #8 x 0.5 inch machine…
This is a easy Mount for Dremel 225 flexible shaft extension.
I've lost one of my mounting plates during moving houses. Unfortunately TP-Link doesn't sell these as a seperate products nor were the able/willing to send a spere one. (I've read that TP-Link US does ship spare parts, TP-Link Spain…
Festool D27 DM-AS/CT and osVac Neo M32/M40 adapters to Bosch C35. I modeled the adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the adapter. OsVac M40 and Festool D27 combi-adapter…
This is a version of my earlier 225x125x75mm case, but this one has a carry handle. The corner bumpers and can be printed in rigid material like PLA, or in a flexible material like TPU. The gasket should be printed in TPU. Screws needed:…
This is a model for an L-shaped bracket for fixing your Tapo C225 Camera to the wall. Scaling is not recommended as dimensions were adjusted to fit the real product. The camera can be fixed through 2 screws and 2 hex nuts. The bracket can…
Remix of Dremel 4000 & Dremel 225 Holder - Gridfinity Système - Dremel Case Organizer for Dremel 4300.
I needed T slot tracks for my Einhell TC-TS 2225 U table saw, so I created some. There are two versions, one for screwing on jigs, the other one to replace the track for the miter jig. there is a slot for a M6 nut. In both versions, the…
Customized version of http://www.thingiverse.com/thing:915435 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=915435 Instructions Using the following options: DoYouUnderstandYouMustModifyTheGCodeThisMakes…
The Antonov An-225 Mriya was the largest cargo aircraft in the world. Developed by the Ukrainian company Antonov in the 1980s, it was originally designed to transport the Soviet space shuttle Buran. The An-225 had six powerful engines, a…
This detailed H225M helicopter 3D model is ready to print on Creality 3D printers in Singapore, perfect for hobbyists, collectors, or military model enthusiasts. The model is designed for both FDM and resin 3D printing, with separate…
Warnings: ⚠ Please read the powerbank module instructions ⚠ Never solder to batteries ⚠ Assemble and use at your own risk ⚠I reccommed getting brand new, reliable batteries from a well known brand, such as Panasonic, LG, Samsung. 2 x…
I made this a while back, and thought I could post it for people to print and what they say about it Depending on your tolerances, you may need to use glue to attach the wings to the fuselage Since you may get blobs, you may want to…
I would be very happy about a Make, Like or Share! Happy printing!
This model is compatible with the lego system.
Spinner pour Xcub S2 1.3m de Horizon Hobby Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Spectrum PLA MATT Deep Black Category: R/C Vehicles
This is scope covers for DNT Optics TNC225R. This model is open sourced, originally created by me in OnShape (free CAD): https://cad.onshape.com/documents/adb0050f873ff66e82018843/w/f74eee5a9668a49b2e15d0b2/e/ac6ac35e0cebbabe29aa26b1 No…
print with PLA Model might warp, because it's so flat and wide/long, so corners might bend and detach from bed - destroying the print, so make sure you have cleaned bed and have good bed levelling. Holder is sticked to the glass wall with…
Medidas en las imágenes / Measurements in the images
IBC Container Inlet Filter (DN150 & DN225) This IBC container inlet filter is designed to prevent large debris and contaminants from entering rainwater storage tanks. The filter is installed directly into the IBC container inlet opening…
printing works with nozzle size up to 0.6mm and layer height 0.32mm spacer can be fixed to wall with screws or double sided tape using the flat area flat wall model does not need supports for wall corner models the use of automatic…
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
Check out my new Bed Levels ! This is a test print I made to help level my bed while it's printing. It is currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D,…
Hi Folks, I found several GoPro mounts for Mark4 but actually none of them fit to my frame and screw spacing. I have ReadyToSky Mark4 225mm REA-Mark4 So I decided to make my own. I suggest printing with a hard TPU as I did.
A three-piece bracket, one mounts on wall, the other two bolt together around the 25mm/1” shaft. The shaft part has a lanyard loop that can be used with a shoulder harness. Max print size of largest object is 70x125mm on the x/y axis and…
This is a custom mount for the TP-Link EAP225-Outdoor to mount it to camera screws (1/4") It uses a brass insert for the thread, I am using these and a solder iron to melt those in: https://de.aliexpress.com/item/1005002616584183.html…
Follow the instructions provided by CLERX for printing this stand. When done just use a paint brush or paint pen to color the top surface of the logo.
DEUTSCH / GERMAN ================= Eine sehr stabile Schubladenbox - gedruckt aus PLA. Alles druckbar ohne Stützen mit 0,4er oder 0,6er Düse. Durch die hohe Stabilität ist die Box ideal für schwere Kleinteile wie Schrauben, Nägel, Lager…
Slice at 0.20mm layer height in your favorite slicer with your settings. Feel free to try and tweak your settings for best performance!
LX-PB225M power bank module for 3D printing. Accurate dimensional model for custom enclosures, prototypes
Don't want to screw into your cabinet? This is for you! This is a modification for the "Pot Lid Holder" by user "@liborkejvalema_46225" Use file "Screw_Adapter" as a washer to keep screw straight in the tapered hole. Print in finest…
I designed this holder to keep the bench dogs with my workmate without them getting lost or being stuffed in a drawer somewhere when I need them. It attached to the frame with two zip ties and is out of the way when stored as well as when…
This is a tile storage box for these rifraf tiles , inspired by this design made to fit inside this specific organiser . It is 225mmx160 and is made to REPLACE the "TM - Tiles" box. /!\ Unfortunately there is no enough space to fit all…
The Outcast Tray-packing puzzle by Stewart Coffin (STC #225) Fit all six pieces into the parallelogram-shaped opening. The Outcast is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it isn't...…
Various TPU parts I designed for the SpeedyBee FS225 Frame. To fit the original Caddx Vista antenna, I suggest you cut the TPU where I marked the red line with an exacto knife, spread and insert the antenna, and then superglue back the…
Hey there, this is my strong design for a Wall Mount on top of the printer, using the IKEA Stuva Pole 17225 which is clipped into the wall mounts. Just print as much as you need and use the Stuva pole. UPDATE 13. Sep 2023 I added two…
TL;DR Saw this Maker Tales video on youtube and made the exercise in freecad. youtube Maker Tales Motivation Learning by doing Collection exercise, CAD Let's get started Enjoy the video and sketch the model in your preferred CAD software.…
Ignition Switch Nut for F225 Yamaha Outboard Category: Sport & Outdoors
I bought my Tektronix 50 MHz scope used a few years back. It came missing the control knob for trigger level. I would frequently swap the "holdoff" knob, located directly below it, until one day, one of the two prongs seating the knob…
A guide for 5 x 4mm OD tubes spaced 15mm apart. Top and bottom half bolt together. The guide has countersunk holes for screwing (lightly, these are not built for strength) to vertical surfaces if required. The M10 Bolts are relaxed,…
Mounting bracket to hang the power adapter from a Synology DS225+ NAS on a wall. I forgot to make the slot for the cable on one of the pictures, i just used a saw to cut this after printing and added the slot to the model before…
Inspired by this sim tray , I decided to model my own for this phone since I needed one in a pinch. This model might be revised a little because it does not fit snug and is not waterproof (though I imagine no print can truly be).
This is a remix of the original temperature tower by gaaZolee . It is a shorter version ranging between 200 °C and 225 °C. The model is sliced for a CORE One / + machine on a PrusaSlicer-2.9.4 with the following default presets: 0.25 mm…
Know Rook 180? I've seen couple of points on the original rook 180 that could have been modified to get even more of the printer but later I saw the video about updating and creating MK1 version so I decided to stop as there should be a…
This is a 2040 extrusion mount adapter for Tapo smart cameras including C200, C210, C211, C220, C225, TC70, and TC71 . 🔹 Designed to fit 2040 aluminum profiles – tested on Anycubic Kobra 2 Neo . 🔹 Non-adjustable – simple and sturdy mount.…
My PTZ Optics Webcam has a little too big of a tab in the front, and it covers part of the screen on my new AW3225QF due to the small bezels. I designed this model to follow the 1700R curve and raise the webcam just enough as to not cover…
zámek kastlíku na babettu 210/215/225
I happened to have a TAPO C225 Webcam that I ended up incorporating into my 3D printing enclosure. Designed a very simple stand that raises the webcam to or just above the level of the MK4 print bed (and still reposition around the…
This is a replacement part for my Einhell TC-TS 2225 U table saw. My original angle jig including the T track broke, so I had to re-create both. My goal was to build something that can work as replacement part and as upgrade part.…
Replacement wheels for a shop vacuum that was sold by several brands: Metabo ASR 25 Bosch GAS 25L Starmix ARD 1225 There may be more brands There is supposed to be a bushing too, mine was missing and too thin to be printed so i left it…
HSW Display Shelf Designed to fit my remix of KYZ Design's display found here https://www.printables.com/model/1531541-hsw-large-display-stand-225x225-remix However, it uses standard HSW mounting dimensions so it's compatible other HSW…
The rise of the company "Audi" is undoubtedly one of the most fascinating stories in the 100-odd years of automobile history. It began with one special name: August Horch. In June 1909, the top management of Horch decided that its founder…
Deets The chain slider on our beat up old XT225 finally gave up the ghost. Ive been wanting to fix it, but it gets ridden a lot. Thankfully the old one broke off so the swing arm didnt need pulled. This model omits the angle for the…
The hole dimension 225 mm (measured at the center of the holes) is for the normal lines. It fits on the roundabout and on the curve which is a 1/6 circle. The total dimensions are 269 x 18 x 44 mm. It would be glad, if someone who printed…
This is a super crude replacement button for the autowatch 225000 remote. It was done real quick, but gets the job done. The original hard rubber material gets cracks over the years and finally falls apart. You are free to remix it and…
A rack to hold multiple 225mL conical centrifuge tubes, such as those made by Corning (Product number 352075). No more struggling to carry them around in beakers to keep them upright. Holes are 62mm in diameter to suit tubes with an outer…
The hole dimension 225 mm (measured at the center of the holes) is for the normal lines. It fits on the roundabout and on the curve which is a 1/6 circle. The total dimensions are 269 x 18 x 44 mm. Attention: Update 2021-07-12: I made a…
This is a sensor housing for indoor use. The outside dimensions are L x W x H: 90mm x 70mm x 43,5mm. The wall thickness is 5 mm. You need: 4 M3 thread-inserts to complete this build. 4 M3 x 12 (or less) ISO 4762
This adapts a 92 mm 9225 muffin fan to a 2" plastic pipe. Using 2 of these enables you to insert a fan in a 2" pipe run. I am using it to exhaust fumes from my composting toilet in our RV.
Simple Test if your whole bed is in correct level. You dont need much material and its printed fast
These are some test prints I made to help level my bed while it's printing. They are currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D, etc. It helps to see…
Wallart of the largest cargo aircraft, the mighty AN225. Can be printed as a single piece or as a multi-part print which can have almost 2m wingspan (but can be scaled down easily) You can support me on Patreon (for price of just one…
The Same Great Display in a Smaller Package I love KYZ's display stand but found the walls were too big for my printer. There are other sizes available but I wanted to retain the ability to use the large accessories so I made some…
This is a nice wall mount that I made for a Pony 1225 band clamp. The counterbored hole recess is 20mm deep. The recessed depth of the mount is 34.5mm to perfectly fit this brand of clamp.
repair piece for heater knob for 3522568 volvo 940 non ac printed fine with supports for clips mk3s
The model is on a scale of 1:10. The color of the filament is in the file name - w (white), g (grey), b (black), r (red). The number in the file name (2x, 3x) means the number of pieces. Part no. 35 is also available in versions for…
Dremel flexshaft 225 collar fix
Erlenmeyer Flask (225ml) cap with space for PVDF insert; 0.2um PVDF acts as a filter to maintain culture sterility while permitting gas exchange. Can be sterilized by autoclave (tested) prior to cell culture if printed using the…
Print face down with supports, you can push the little LED diffuser out of the old front plate and push it into the new one. I've only fitted this with an ST-251, but I think it should fit other drives like the 225. I used matte black PLA…
Print this in the orientation shown below (no supports needed at 0.25 mm layer height). You will then need 3 M3-nut inserts. I used M3x10 screws. Printed out of PLA, 5 walls, 15% gyroid infill. The 3 nut-inserts go like below Then
Bei unserem Fendt GT 225 war ein Schaltknauf abgebrochen (ja hätte ich auch nicht gedacht... doch geht...). Weil es diese Teile so nicht mehr gibt, habe ich sie mir mit dem 3D-Drucker neu erstellt. Dabei habe ich die Knäufe auch gleich…
I needed a surface mount for the presence sensors to mount and test the positioning them before I cut big holes in the ceiling and regret the position later.
skadis holder for a 225g wood glue bottle from Ponal
English: This is a remixed Mount for the Samsung Galaxy Tab S7 Lite SM-T 220 / 225 to be able to mount it on the pegboard of the Bambulab P1P. Easy to remove. Should be a great way to control the AMS a little better and also for the later…
Shelf bracket for Bosch 225 Freezer. Requires supports. For best presentation, print with the flat side downwards.
German: Eine einfaches Zwischenstück für den Samsung SyncMaster P2250, damitt er die gleiche Höhe wie ein 24" Monitor hat. Der Monitor kommt so um 30mm höher. Benötigt wird eine Schraube M4x40. English: A simple adapter for the Samsung…
.225 Winchester stacking loading block with a clearance of 20mm for powder funnel. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Required Hardware: 2250 box 6 x M3 x 30 mm screws (room for a 7th spare screw in the TPU insert) 5 mm EVA Foam for lid Calibrator box 6 x M3 x 30 mm screws Materials/print settings: PETG - 6 walls, 3 layers base, 3 layers top, 15% gyroid…
Get started racing quadcopters with this simple and durable frame. Printable on 200mm x 200mm bed. 87g with 50% infill ABS. Used ABS slurry, but PEI sheet is better. 250-400g AUW with battery, depending on your build. kiloohm.com Print…
I created this to adapt my Moen Monticello faucet assembly for use with the newer Moen 1225 replacement cartridge after the original cartridge model was no longer in production. The recommended handle interface part#109113 included in the…
