331 models
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Got 10 minutes and 2g of filament? That's all you need for this cute little glider. A perfect print for testing a new sl
can be printed together the model needs to be glued together or separately in other colours can be printed without support the corsair is very realistic Print in place kit card , Assembly required
This is a device that neatly trims the crimped tops off loaded 12 gauge shotgun shells. There are separate model for 20 gauge and 28 gauge. Mostly this is done to reload shot shells with the appropriate solid shotgun slug, such as the…
"Special" ammunition box holds 15x 12/76. Hardware : 6 x M3 12mm Print setings: Lager:0.2 Infil 15% Material petg . If you like my project you can buy me a coffee. Thanks https://buycoffee.to/dabal
Box : Ammo box 12ga ammunition storage 20 rounds ammo crate 12 ga Dimensions : 6” x 3.5" x 3” Includes : - base (lower) - lid (upper) - lid punisher edition multicolor (upper) - lid punisher edition single color (upper) - insert - front…
Version 2 of my original Shell Caddy Designed for ELS and Tek-Lok mounting systems May fit others with 1.5" hole pitch 10° grab angle on the shell groups Added mounting options and configurations New parts work with old mounts, if you…
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
Version 2 of my original Shell Caddy Designed for ELS and Tek-Lok mounting systems. May fit others with 1.5" mounting hole pitch 10° grab angle on the shell groups Added mounting options and configurations New parts work with old mounts,…
Simple Multiboard Push-Fit Double Glue Stick Holder for the larger 22g Glue sticks.
MinionD Ender 3 / PRO / v2 dual duct 12gr | stock hardware With the existent hardware, this dual duct mount is intended to replace the stock one, improve part cooling, air flow... Easy to print, mount and do some maintenance ;) After a…
Independent fan holder for SV08. detached from cover widely visible nozzle only 12g good airflow inspired from bambu shroud screws into the toolhead board works with Eddy punch through screw hole(for easy print) does not need a cover.…
This is my remix of Linear Bearing Greasing Cap by walter to fit on small 12g tube of Super Lube. It is only for LM8UU (8mm) bearings. You have to cut off the tip of the tube just above the thread like I did (check pictures). I have…
I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…
I printed mine out of PLA, but I would recommend TPU. It mounts the camera at a 35-degree angle. It mounts on top of the U.FL socket to hold it down, as I found it would always come out with the stock design.
This dice tower round I wanted to participate, but I wanted to make a dice tower in vase mode for low filament usage (72g) and for the additional challenge of designing such a tower with the limitations that come with vase mode. I am…
not perfect but they hold the shells for hand reloading. i put supports on for the eased edges. takes about 2 hrs to print.
I was looking for a very simple 2GT belt clip and couldn't find anything that didn't require additional hardware for an open belt so I came up with this simple design. It features two individual parts that join together to lock the end of…
12G and 20G Shotgun Choke Boxes Fully printable one piece design. Long choke boxes for chokes up to 90mm (3.5 inches) in length. Minimum print bed size length 238mm width up to 120mm 12 Gauge - 6, 8 or 10 choke boxes 20 Gauge - 8 choke…
2GT-20 Pulley, 2mm pitch, 6mm belt width. No support is needed, since the top rim has been chamfered. If you printer cannot do the 4mm set screw fine enough, you can just screw it it in against the plastic and it should still work.
Function ：Guide waste material to slide down from the left side of the printer via the chute. Key Features 1. No original part replacement, easy installation 2. Metal-free, fully 3D-printed 3. Printable with any material 4. Only 51g, easy…
Without bearing, should rotate freely on a M5 Screw.
Lets save our K1s :-) This is my linear conversion for X axis. Every version i found was complete makeover. Not this one. This is cost effective coz you reuse most of your stock hardware. Designed for STOCK or POWGE idlers. No software…
Magazine loading assist for 12GA magazines. Tested with stock Panzer Arms 5 round 12GA mags, Rock Island Armory 9 & 19 round 12 GA mags. No others available to test yet but it should work on most 12ga AR style magazines. You will need…
Simple hygrometer stand for household/office/garage/printing purpose. Fits popular low cost eBay, Amazon, Aliexpress round hygrometer modules. Fits perfectly to the module, also fitting area is thin for module replacement or re-use. I…
Originally made for a H2GP project at my school, it's about 300 features, made in a week on OnShape. You can mod it to your liking although the features are a bit of a mess! Made completely by me, took like 50ish hours, enjoy! (Also post…
I checked the other filament holders here, but all I checked have the wrong thread - at least for my 3 Neptune Pro (they have a thread pitch of 1.8mm – the correct pitch is 1.5mm), so I had to design my own model. Since I love vase mode,…
This coffee scoop is both easy to print and comfortable to hold, making it the perfect companion for coffee enthusiasts. When filled, it holds approximately 12 grams of coffee beans. The scoop features a hanging hole for convenient hook…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
I created my own 12g breech flag (safety flag) because plastic one alway get broken pretty fast. Back side is not too big so don't caught by extractor. Tried to print with PLA/PETG/ABS and all those filaments broke fast. So my conclusion…
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
This M-Lok compatable shell holder holds 3x shells in the vertical position. Included is the step file incase you want to edit/remix. I specifically made this for airsoft but it can be used for real-steel. Recommended filament: PETG
can be printed together the model needs to be glued together or separately in other colours need to use a support the corsair is very realistic Print in place kit card , Assembly required on my profile is a whole folded plane
These are 3D-printable shotgun chamber flags that fit directly into the chamber and stick a big bright plate out the side so it’s obvious the gun is clear and unloaded. I’ve included models for: 10 gauge 12 gauge 16 gauge 20 gauge 28…
A cute Valentines Day Kirby holding a heart :) Perfect as a Valentine’s Day gift or desk decor. SIze: 38mm x 42mm x 37mm Print Info: Monocolor: Just 12g and printed in <1 hour! Multicolor: See 3mf file Use the provided 3mf files for…
inline fishing floats / bobbers useful for slip rigs you might need to use a drill bit or wire to clean the inside so the line can slip smoothly
*UPDATE 31.12.25 → Now includes models for 12gauge Shells of the 3 major legnths. Be sure to choose the right variant for yourself. *UPDATE 02.03.26 → Added a blank front face for all variants. Now you can write on it as you please. A…
Creality K1 belt clamps. Added as much material and strength in this tiny part as possible. Print in HT-PLA-GF or PPA-CF, 0.2 layer height, 3 perimeters, 100% infill. Holes are 2.8mm - slightly undersized so they must be drilled to 3-3.2mm.
Two models: One for nine pieces of CO2 cartridges, made for screwing it to e.g a piece of wood One single holder Print with TPU , 95A should be soft enough
Wings to be able to mount a Cisco C1000 into a standard 19" rack. I would recommend printing in PC or another tougher material since the wings have to deal with a decent load. I printed these with 5 perimeters with 20% adaptive cubic…
I have been using it for over a month now and am very satisfied. Features No original part replacement, easy installation Metal-free, fully 3D-printed PETG printable Only 2g, easy to print, no supports required Significant optimization:…
My Nextbase 522GW came with two adapters for attaching to the window, a suction cup and a flat plastic base for use with a small piece of 3M VHB. I had only used the suction cup for years and now that I want to permanently attach it with…
INTRODUCING THE TACTI-SHELL FOR ALL YOUR SHELL HOLDING NEEDS Three pieces, print and glue together. Holds 4 shells, which can be oriented either direction based on preference. Designed to prevent shells from falling out while playing…
For years i've had 12 gauge shotgun ammo but no suitable container to store them in, as i've gotten into clay pigeon shooting some of that ammo has a use but again no suitable container to transport them in. So i decided to design my own.…
This is a Remix of MilStrata Manufacturing's bracket to add a grill that matches the Dell 12G Tower Server aesthetic. Two separate models, one with minimal grill and one with full grill. For Dell 12G tower servers, depending on setup of…
This adapter allow to connect hpa tank to chinese asg co2 pistol kwc 941. It's tested and working. Outher thread - M21x1,5 Fill nipple - M10x1 Ptfe gasket - OD 8,8mm x 2,4mm; 3mm thickness (this is crucial part!) Alu tube - OD 6mm x 1mm;…
My magnetic Shit Bucket and compact poop container that mounts to the chassis with five 10mmx2mm magnets . WARNING: Sport mode (or slower) is recommended (probably just need to dry my filament - ludicrous wasn't perfect for me). V3…
A shell holder with loops to attache to straps or belts (Up to 1.75"). It holds 5 Shells by friction.
Media basket for the middle chamber of the 32 gallon BioCube.
This is a screen cover I made for my BMD 12g Video Assist 7". The face of this is meant to flex allowing for it to be attached and removed without breaking. Printed in bambu labs matte PLA. Angles could definitely be refined for cleaner…
Three models for 12g gram CO2 cartridges. 19.0 mm for a loose fit. 18.8 for tension. 18.6 for a really tight fit. I typically use these to make water torpedos for pool use.
This clip was designed to serve as an alternative to nail-down electrical wire clips. The primary goals were to hold the wire as tightly as possible with only one screw and to be easily removed if needed. The thickness, placement of the…
— — — Edit 11.06.25 Added CAD files — — — I couldn’t find a 10-inch rackmount that fit my MokerLink 2G080110GSM switch—so I designed one myself! The switch slides in from the back and is held securely in place by built-in hooks,…
Use rubber band to launch the plane. Print it with 30% infill.
5 периметров, от 20% заполнения, печать как указано на фото и с поддержками древовидными. можно печатать с технологией нечеткой оболочки. //// 5 perimeters, from 20% filling, printing as indicated in the photo and with tree-like supports.
i created a simple plant holder for aquarium enthusiasts it is suitable for 6 and 8 mm glass wall-thickness aquariums. It is useful for plant holding in aquariums, aquaponics, plnat rooting. less than 2 g of filament No support needed, i…
This modkit was designed to suit my own grip style. It's a fingertip grip, but I rest my middle finger on the scroll wheel and right click with my ring finger. The right grip is designed to accommodate solely the pinky finger, hence it is…
These are the Case with I/O slot cover for the JetsonNano 1st/B01/2GB. It can be fitted with a fan. The SD card is not allowed to fall into the gap. JetsonNano Case for JetsonNano 1st JetsonNano_Case_Case_Top_A is Top Case with Top I/O…
The 7.62 x 39mm Ammo Can Label Stencils! - 122gr - 123gr I recommend white paint, but of course its up to you and what color your storage container is! Enjoy!
3 slots CO2 bottles container for safe storage in backpack or side bag. Caution: before the 1st usage use abundant WD40 on treads to ease the coupling. Following the first go no more treatment is required.
Este es el escaneo de un soporte original que tenía guardado para el Mitsubishi Eclipse de segunda generación, para poder ponerle 3 relojes en la zona del pilar A izquierdo.
DUMMY 13 Weapons Storage Rack (Holds 26 Weapons) A compact storage rack designed specifically for Dummy 13 weapons, holding up to 26 pieces while only using around 32g of filament. Perfect for keeping your growing Dummy 13 arsenal…
You will need 1x GH-301-AM as locking mechanism 3x M4 threaded inserts 3x M4x8 screws or similar 1x M3x16 and nut for adjusting the tension of the mechanism
Might suggest PETG instead of PLA for these as PLA seems to creep more long term. Zip tie for extra security, if you want Works great on Rook Mk1 and Rook 2020.
This was made so I could reuse cheap shotgun shells to make 12 gauge shotgun snap caps. I found some 3D models but nothing that fit. It was designed using Federal Top Gun 2 ¾" shells I printed in ABS and PETG, both with 35% fill and 4…
this fuel cap holder was created by Siimoon for Evo but it is modified a little to fit the eclipse 2g and maybe the 1g.
I modelled this part using some specs I found online.
This is a remix of the 'Customisable Organiser' by DarraghB, which can be found here. This is an insert I have sized to work with the Wera 2go 4 tool quiver. It has 2 rows of 3 columns, with a total of 6 slots, I have chosen this to suit…
This is a replacement bracket I designed for my Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL . I acquired the card second-hand, and it only had the half-height bracket installed for a SFF PC. I contacted Gigabyte and they (of course) had no…
This is a remix of a 12ga 2 3/4" shotshell I found on Thingiverse (https://www.thingiverse.com/thing:5276446) by Ross2K. I don't have a Thingiverse account, and I can't find Ross2K on Printables, so this is the best way to give him…
Servo pulley replacement for MMX with 4 extra teeth using included servo hub from seleadlab MMX kit.
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…
I hate having my co2 cartridges dangling at the bottom of a box so I made this solution for storing the cartridges.
General: Did I mention it's magnetic? also, I designed it to accommodate a wide range of bag thicknesses and to stay in place with gripping teeth. Why I designed this: I designed this because we never have enough chip clips around. Chip…
This small square thingie makes your used CO2 cartridge look like a bomb. Might be used as a prop for RC planes.
12 ga shell holder allows you to grab 2 shells at once for faster reloads. pass belt over frame to secure it to your bod
this is a 12 gauge snap cap made for jamming practice unless you have a non-12 gauge shotgun its too scale
This is a chamber flag for any 12 gauge shotgun between 2 ¾" - 3 ½" chamber. I have used this on my Winchester SXP and Benelli Supernova with great results on each. The flag features text from all of our favorite red tool company, a…
SicherheitsRahmen für das Icom IC706mk2g Amateurfunkgerät. Um dieses beim Transport vor Schäden zu schützen. 2 Teile müssen gedruckt werden und man benötigt 4 Senkkopf Schrauben M5x12 um die Teile zum montieren.
Recomiendo imprimirlos en ABS/ASA y una vez alisado el acabado superficial dar un barniz o pintura protectoras para protegerlo de los rayos UV. Se han dado casos en los que el paragolpes tiene una deformidad tan grande que no ajusta bien.…
I needed to clamp a GT2 / 2GT belt for a custom SCARA design, with some tight spots. Most clamps don't run past a sprocket, or tend to slip if they do. I was inspired by Idegraf's design ( https://www.thingiverse.com/thing:1247615 ), but…
This is a helpfull friend for a modern hunter. Maximum total lenght of the shell is 60mm. Print with four perimeters and whatever filament you like, glue the clips in and enjoy.
Simple little pixel heart charm for your Crocs. It prints fast, doesn't need supports, and snaps into standard Crocs-style shoe holes. Works great with a filament swap if you want the heart to stand out, but it also looks good as a…
Basically just the half height version For Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL Would recommend printing using tree supports for only the half circle. The rest prints just fine.
Easy to print model, designed for 32gb Sandisk Cruzer Blade USB but would probably work with the other storage sizes too. The chip comes from the inside of the two halves of the original sandisk case and clips into the new 3d printed one.…
Adapter to mount the XIAOMI Mi Computer Monitor Light Bar to the LG 32GN650-B monitor. Adapter doesn't change position of the lamp. Remove built-in supports and install the mount and adapter to the monitor using zip tie.
12GA Channel Strut 1 5/8in. x 1 5/8in. designed for use with modeling accessories or hardware. Compare to: https://www.lowes.com/pd/Adamax-Adamax-12-Gauge-Channel-Strut-EG-10-FT/5001905073 CAD models attached.
RackPi Style Mount for Multiple Blackmagic Design Micro Converters (see STL names) on DAP 19'' 2HE MP-1. If a Converter is missing that you need, write me a message and i'll ask some measurements to add it. Tested on this printable…
Slim case for the Nvidia Jetson Nano 2GB version. I just enlarged the mounting holes on the board, with a drill, to use 3mm screws as I have a lot of them. I used M3x6mm screws to mount the board and the lid into these brass inserts. The…
A 2g, 10minute, 1 layer test to see how calibrated your printbed is. Layer-height: 0.2mm
Belt holder for standard box of 25 count 12 gauge shells with slots for spares. Prints without supports. Should be printed with a minimum of two perimeters, preferably three.
Simple USB-powered solder fume extractor with 12V fan. Fits a Noctua NF-P12, powered by MT3608 Step-Up-Module . I use these filter mats in there (need to be cut into shape). The design uses M3x12mm (4x) and M3x20mm (5x) countersunk screws.
I wanted to use my 9mm laser bore sight on my 12 gauge to help set up a sight. So I built an adapter to drop it in so I didn't have to buy another laser sight. I included the Solidworks file, which can be adapted to yours. There's 3…
Got 10 minutes and 2g of filament? That's all you need for this cute little glider. A perfect print for testing.
For use to bulk load 12ga shells in a 30cal ammo can Print instructions prints best on the side. print the base at 10% infill and the spacers can done with 3 walls and 0% infill
Its important to use the stiffest material you have and maybe some foam to increase friction so it wont slide down the bar If you want to save filament, time and don't care about a rough surface on the lower part, switch to snug supports…
Remix of the v3.7 transmission so you can use a longer transmission belt if you can't find or have a 188 belt. This transmission should work with any size between 188 and 202 (maybe even 204) but the shorter the belt you use with this…
I made this spoon after I've ridden an article which says I most effective to take between 3 and 5 Gr/day in Two times. So like that 2X2gr is perfect. To have 2 gr the spoon must be rounded.
Took the idea from @alignboytw on Thingiverse ( https://www.thingiverse.com/thing:4684057 ) and created the same basic clips for wire spools in 5 sizes. Hope somebody find this useful! Print instructions Category: Organization Summary…
This really can save your matches! It fit's perfectly on the hand guard of a Benelli M4 T-Pro, e.g. Super 90 T-Pro. It's made for 12GA and will work with all sizes (12/65 up to 12/89 also with magnum rounds) You need 2x M4x10 screws. Be…
![Atomic fan holder toolhead for SV08 Bambu style [12g] Eddy Compatible](https://media.printables.com/media/prints/1053885/images/7998873_fb6d9039-b3d2-4fb6-97d9-39a433889e15_5a0cda26-165f-4688-8f1b-36ddad0950ea/pxl_20241029_221937440.jpg)
