P
PrintablesBooks
Radial 608-2RS-C3 Bearing Model
Model of radial bearing type 608-2RS-C3 commonly used in part assemblies.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
- Downloads
- 45
- Likes
- 4
- Rating
- 0
Search results: 2r
312 models
P
PrintablesTomDD
ZXPicoIF2ROM v1.1PCB Case
Simple case for the ZXPicoIF2ROM v1.1 PCB. Just snaps together and gives full access to the Pico. Details on my GitHub https://github.com/TomDDG/ZXPicoIF2RO
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesBuildX
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]](https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg)
#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…
- Downloads
- 6,621
- Likes
- 1,501
- Rating
- 4.94
P
Printablessuit
Bambu Lab Filament Swatch with 12x22r2 Label
The original Bambu Lab swatch is OK but it had a few things that needed to be fixed. label: I've added a a slot for a standard 12x22 label with 2 mm corner radius - like those for Niimbot or Brother Label printers. If you don't have one,…
- Downloads
- 3,000
- Likes
- 415
- Rating
- 4.96
P
Printablesmt_benno
2021 Kawasaki Ninja H2R
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
- Downloads
- 1,350
- Likes
- 63
- Rating
- 0
P
Printablesjoshua Bentley
DEEP DISH STEEL RC WHEEL RIM 1:10 SCALE 52 X 26 12 MM HEX STEELIE SPARE TAMIYA TT 02RADIO CONTROLLED CAR
I made a steel wheel with a deep dish for my tt02. I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires. The wheel is designed to be printed face up with supports at…
- Downloads
- 1,326
- Likes
- 175
- Rating
- 5
P
PrintablesAmieDD
Micro Servo Wing SG92R Horn
Micro Servo Wing SG92R Horn Replacement wing for SG92R Micro-Servo Print instructions Unassociated tags: hybrid world, Micro Servo, micro servo parts, servo horn, servo piece, servo replacement Category: Robotics Print Settings Printer…
- Downloads
- 578
- Likes
- 33
- Rating
- 5
P
PrintablesRob Latour
Enclosure LCD 1602 ESP32 DS3232RTC I2C
Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Prusament PLA PLA…
- Downloads
- 481
- Likes
- 43
- Rating
- 5
P
PrintablesRoed
Voron 0.2r1 Wide/Extended Feet - Stock skirts (UPDATE)
UPDATE - 29 September 2023: I've uploaded version 1.1 of the designs, all parts have some changes for easier printing. This means that all feet have build in print supports at the bottom. Also the rear left feet is now split into 2 parts:…
- Downloads
- 446
- Likes
- 109
- Rating
- 5
P
PrintablesGraloth
6201-2RS Bearing
I've used 6201-2RS bearings for a lot of projects recently, and wanted to make a better 3D model to design around in Fusion360. This is the current result, it's not 100% accurate when it comes to the bearings internal geometry, but it was…
- Downloads
- 438
- Likes
- 13
- Rating
- 0
P
PrintablesSuyash Rajesh
Stealth Press F695-2RS Bearing Pulley Hub
A pulley hub for F695-2RS bearings. The overall width is 9 mm. May need tiny amount of support on the bottom surface, but might not be necessary. Can print in whatever material you want, this part shouldn't be near any of the heat of a…
- Downloads
- 427
- Likes
- 58
- Rating
- 5
P
PrintablesKhang
Sovol SV06 Filament Spool Roller 608-2RS Bearings
I did an e-steps and flow calibration before this. The orientation of all the parts I printed is how it is shown in the STL when you load it. It doesn't matter how you print it but here's how I did mine: Barrel and roller with normal…
- Downloads
- 381
- Likes
- 71
- Rating
- 4.88
P
PrintablesSvenMb
Housing for ftdi ft232rl usb-seriell converter (YP-05)
this is a housing for a usb-serial converter I recommend ISO7380 M3x6mm screws, but the print also provides clip-in without screws Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2mm…
- Downloads
- 356
- Likes
- 11
- Rating
- 0
P
Printablesdriftrotor
V0.2r1 Double Shear AB Drive MGN7 + MGN9
well, where to begin… This was kind of a dream and to be honest I didn't expect it to work given the size it had to work in… After the usual staring at the PC with ideas of what / how and what not to do, I just went for it and allowed the…
- Downloads
- 308
- Likes
- 107
- Rating
- 5
P
PrintablesBuildModHack
- Downloads
- 295
- Likes
- 34
- Rating
- 5
P
Printablesonorinbejasus
PAINTING ROTATING STAND - 608-2RS
I remixed the original model to use a 608-2RS bearing instead of the original 609
- Downloads
- 279
- Likes
- 72
- Rating
- 5
P
PrintablesYell
Bearing 6200 2RS print in place
needed for this spool rewinder https://www.printables.com/model/750033-donor-spool-holder-with-bearings-modular-design-fo its a Bearing 6200 2RS they work, just make sure to turn on random Z seams and have your first layer and stringing…
- Downloads
- 279
- Likes
- 27
- Rating
- 5
P
Printableseried
Creality LD-002R/LD-002H better drip mount
Build plate is held at 45 degrees on roll and 15 in pitch, so the dripping is faster. No supports when printing. Category: 3D Printer Accessories
- Downloads
- 255
- Likes
- 22
- Rating
- 5
P
Printablesjaeseopark
Metabo C12RSH2S zero clearance insert
This is a zero clearance insert for Metabo C12RSH2S. Also marketed under Hikoki and Hitachi. The plate should also fit the respective predecessor C12RSH. The insert is 464mm along its length so do your math and download the file that fits…
- Downloads
- 254
- Likes
- 33
- Rating
- 5
P
Printablesdriftrotor
Voron V0 / V0.1 /V0.2 / V0.2R1 Umbilical cover (with strain relief)
Designed in tandem with my tool head strain relief found here… https://www.printables.com/model/620904-voron-v02-r1-umbilical-strain-relief-super-light This is the Main Printer side PCB mount. designed from the ground up I have… made it a…
- Downloads
- 248
- Likes
- 40
- Rating
- 5
P
PrintablesByteWelder
Voron 0.2R1 cover panel for CAN bus with PG7
A replacement for the panel near the XY motors. Instead of the regular Voron 0.2R1 umbilical, you can use a PG7 for CAN. It also features a recess for RGB wires (e.g. Daylight/Disco On A Matchstick) and a hole for a 4 mm PTFE tube. CAD…
- Downloads
- 247
- Likes
- 34
- Rating
- 5
P
Printablespittance
Bosch Rotak 32R Lawnmower Pulley/Fan - Version 2.3
My Bosch lawnmower stalled and melted its drive pulley - I designed and printed a replacement Update 21June 2016 It finally died - the mower ate a chunk of wood which jammed it and caused grievous harm to the pulley and tension bearing…
- Downloads
- 231
- Likes
- 6
- Rating
- 0
P
Printablescuitlahac
FTDI Adapter FT232RL Case
A case for a FTDI Adapter FT232RL. Pretty tight fit. https://cuitbuilts.wordpress.com/2018/03/04/ftdi-adapter-ft232rl-case-3d-print Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: No Supports: No Resolution: 0.2…
- Downloads
- 196
- Likes
- 12
- Rating
- 5
P
Printablesryandam
Voron V0.2 V0.2r1 Mini Stealthburner with Cat Ears
Update: 14/06/2023: Update with v0.2r1 part Just for funs :))
- Downloads
- 196
- Likes
- 52
- Rating
- 5
P
PrintablesMichaelMdp
Siboor Voron 0.2R1 No drop M3
As the extrusions for the Siboor Voron 0.2 R1 are different that the LDO extrusions, I couldn't find a model that fitted. Hope this helps other people. You might have to play with the tolerances as it is a tight fit. Cleanup up the…
- Downloads
- 195
- Likes
- 25
- Rating
- 5
P
PrintablesJvAh
Vial holder (2R)
This holder can hold up to 12 vials Print Settings Resolution: 0.2 Infill: 10
- Downloads
- 192
- Likes
- 62
- Rating
- 5
P
PrintablesZen3Dlab
Extended feet for the V0.2r1 skirt (optional HULA)
I adapted the very cool "stealthskirts extended feet" model to the Voron V0.2r1 skirts. They fit nicely. The MainsInletFoot element should be printed in the orientation shown in the picture, so even a small amount of support is…
- Downloads
- 190
- Likes
- 51
- Rating
- 5
P
Printablesprobertson
Creality LD-002R/LD-002H Double Angle Build Plate Drain
This is an add-on for the Creality LD-002r resin printer to help drain the resin from the build plate (and model) after a print. UPDATE: I haven't personally tried it, but others in the comments have said that it also works for the…
- Downloads
- 187
- Likes
- 12
- Rating
- 5
P
PrintablesAlexY
FuseBox2R CoreXY 3D Printer
Update: FuseBox2R v1.1 files are available on Github. Reworked gantry is more rigid and has an improved belt path. A partially complete build guide has also been added. FuseBox2/FuseBox2R Github repo (Check here for latest part files,…
- Downloads
- 177
- Likes
- 54
- Rating
- 0
P
PrintablesMotani_Works
MINI Toyota 4 Cylinder Engine 22RE, Complete Working Model Mini Edition
Toyota 22RE Mini Version Made as a desktop miniature, or as a rough representation of how the real thing works (only the pistons and crankshaft move), the crankshaft is able to be hooked up to an electric motor. Makes a great thing to…
- Downloads
- 166
- Likes
- 40
- Rating
- 4
P
Printablesdemetrius
Bearing 625 2RS - Dummy
A simple bearing dummy for help on your creation needs. Category: 3D Printer Accessories
- Downloads
- 163
- Likes
- 8
- Rating
- 0
P
Printableseried
Creality LD-002R/LD-002H split vat cover
Print 1 and 2. The join in the middle is on an angle, to prevent light leaks. The lid itself is quite thin and fits perfectly. File "full" is included just for reference. Category: 3D Printer Accessories
- Downloads
- 163
- Likes
- 14
- Rating
- 4.8
P
Printablesjeronbernal
Voron 0.2r1 Filament Runout Sensor feet for Voron 0.2
Original STEP and model from @Matthew mapaba#0044 from the voron discord! he shortened and mixed Original V0.2 feet with V0.2r1 feet to get the FRS BOM and instructions: manual is located in the original Voron V0.2r1 github
- Downloads
- 162
- Likes
- 32
- Rating
- 5
P
Printablesbykim
Umikot V2rc1 Thrust Bearing Remix
I am no longer maintaining this remix and have stopped following along with the revisions for the Umikot. I no longer use it for my prep workflow. YMMV I improved the Umikot mechanics with Thrust Bearings for a smooth, maintenance free…
- Downloads
- 160
- Likes
- 28
- Rating
- 0
P
Printablesideat0m
Reel2Reel Nab -207F (F-variant)
Another Reel to Reel Nab adapter Its prototype. Tested with Tascam and Akai Reel to Reel. White powder that is a bit visible on the red Nabs is a solid toilet soap. Helps move threads ... For better tolerance, I personally print the lower…
- Downloads
- 158
- Likes
- 10
- Rating
- 0
P
PrintablesRedukt
VESA for 32" Samsung U32R590
BOM Inserts version: M4xL6.7xOD6.8 Brass Flange Insert 10 M6xL11.7xOD8.7 Brass Flange Insert 4 M4 NUT ISO 4032 2 BOM Nuts version: M4 NUT ISO 4032 12 M6 NUT ISO 4032 4 BOM 2mm Monitor plate: M4x16 SCREW ISO 10642 2 M4x8 SCREW ISO 10642…
- Downloads
- 156
- Likes
- 5
- Rating
- 0
P
PrintablesPhanden
Voron 0.2r1 Rear Skirt w/keystone
Just added a keystone for Voron 0.2r1 Rear Skirt.
- Downloads
- 154
- Likes
- 29
- Rating
- 5
P
Printables4sStylZ
Old Kawasaki logo keychain pendant (H2, H2R logo)
Keychain / Pendant made with the Old Kawasaki Logo
- Downloads
- 152
- Likes
- 9
- Rating
- 0
P
PrintablesKarči Kočnár
Mini Stealthburner 0.2r1 LGX Lite Remix
Improved fanducts from updated MiniStealthburner Model from 0.2r1
- Downloads
- 144
- Likes
- 25
- Rating
- 5
P
Printablestn00364361
Voron V0.2r1 Mini Stealthburner Cowling for Orbiter V2.0
This model is inspired by the design from @Oleynick_266380 , but I use the V2.0r1's model as the base. Noticeably, the fan ducts are wider, allowing more airflow. You will need 3xM3 heat-set inserts (two on the top and one on the back).
- Downloads
- 144
- Likes
- 25
- Rating
- 5
P
PrintablesRasor
Creality LD-002R Resin Vat cover
Simple resin vat cover (in two pieces for now) for the Creality LD-002R SLA Printer. Print the part twice! Whole single piece version is included for remix purposes (wont fit due to clamps as is). Category: 3D Printer Accessories
- Downloads
- 143
- Likes
- 13
- Rating
- 5
P
PrintablesHeyItsTor
V0.2r1 Mini Stealthburner Orbiter Cowling
Removed the stock extruder setup on the Mini Stealthburner to add an orbiter with fil sensor, uses the same hotend mounts and X carriage. Needs 3 heatsets for the extruder and to mount it to the stock X carriage
- Downloads
- 139
- Likes
- 31
- Rating
- 0
P
PrintablesGiorgio91
Front Light Cat 950 style for 1/14 BURNIE222rc Loader
Headlights for Loader 1/4 Caterpillar Style for Burnie222rc loader Material: -Petg clear -Pla or Petg Black 2x -3mm orange led for turn signal 2x -5mm white LEDs (I used the low profile ones inserted from the front of the headlight) 2x…
- Downloads
- 135
- Likes
- 20
- Rating
- 0
P
Printablesdancan13f
Starter and Command Box extension for the Toyota 22RE Engine
This is a Starter and his Command Box extension for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ) Print instructions Printer: Geeetech A10 Rafts: No Resolution: 0.15mm Filament: Geeetech PLA Black and Silk Silver…
- Downloads
- 131
- Likes
- 18
- Rating
- 0
P
Printablesdancan13f
Distributor Extension for the Toyota 22RE Engine
This is an addon of distributor for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). This add on is a complement of : https://www.thingiverse.com/thing:2599638 Print instructions Printer: Geeetech A10 Rafts: No…
- Downloads
- 128
- Likes
- 28
- Rating
- 0
P
PrintablesLuu Lac
Creality LD002R Carbon Pellet Filter Box
Recirculate the air inside the chamber using more activated carbon pellets than what came with the Creality LD002R resin printer. The original setup of the fan blows the fume out into the room which doesn't make a lick of sense. This…
- Downloads
- 127
- Likes
- 17
- Rating
- 0
P
Printableskaelen
Mini SB 0.2r1 Klicky/KlickyNG Cowling with hex pattern
Since klicky is now supported on the mini stealthburner I wanted to upgrade and not lose the hex pattern. This is the Revision 1 mini stealth with better part cooling.
- Downloads
- 127
- Likes
- 17
- Rating
- 4
P
PrintablesCaelestis Workshop
Delta-P fan duct V2R2.2-duct X2-Endoscope
You can read my full guide on how to make this and set it up over at Instructables . Made for 7mm camera modules (some filing might me needed to get a snug fit) Print in PETG, 0.2mm layer height. If you make this, I would love to see how…
- Downloads
- 124
- Likes
- 34
- Rating
- 5
P
PrintablesPhil M
Bosch Rotak 32R switch handle
designed a printable replacement for a Bosch Rotak 32R lawn mower handle / switch as the original ones break easily Bit of an obscure part but sharing just in case there's somebody else that needs this. It takes quite a bit of support to…
- Downloads
- 123
- Likes
- 8
- Rating
- 4.5
P
Printablesdancan13f
Front Drive Shaft Extension for the Toyota 22RE Engine
This is a Front Drive Shaft Extension for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). The Drive Shaft is the same than the original : https://www.thingiverse.com/thing:1344976 The Axle Wheel Flange (2x) is the…
- Downloads
- 122
- Likes
- 21
- Rating
- 0
P
PrintablesFabian2010
Kawasaki Ninja H2R Wall art
Habe lange darauf gewartet das jemand eine Kawasaki Ninja H2R als Wall Art Design macht jetzt habe ich es selber gemacht
- Downloads
- 116
- Likes
- 10
- Rating
- 0
P
PrintablesPhilomathe
Test model for 608-zz / 608-2rs ball bearing inclusion
This is a small model to test your printer calibration and tolerance for designs including the classic 608-zz and 608-2rs (22mm x 7mm x 8mm) ball bearings. The inner part can be snap/cut out to test rotation. With my mk3s+, prusament…
- Downloads
- 112
- Likes
- 12
- Rating
- 0
P
Printablesideat0m
Reel2Reel empty spool 7inch / 18cm, aka AKAI - AMS
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
- Downloads
- 111
- Likes
- 8
- Rating
- 0
P
Printablescarter_383
608-2RS To M4 Bearing Bushings
608-2RS To M4 Bearing Bushings print Settings: nozzle diameter: 0.20mm layer height: 0.20mm infill: solid walls support: NO walls: 3 top and bottom layers: 2 to 4 material: PLA Parts Needed: 608-2RS Bearings: https://tinyurl.com/2ctn43y3…
- Downloads
- 110
- Likes
- 17
- Rating
- 0
P
PrintablesFlying Gyroscope
Spool Holder for Rubbermaid Dry Box (625-2RS Bearings)
The Rubbermaid 21 cup container makes a convenient dry box for humidity-sensitive filaments. My design needs a single hole in the container for the bowden tube passthrough, and uses rubber washers to preserve the airtight seal. There is…
- Downloads
- 105
- Likes
- 31
- Rating
- 5
P
Printablesnohbudi
Voron v0.2r1 Right-rear-side skirt RJ45 Ethernet and USB ports
The Fysetc kit comes (or did) with 2 adapter leads to be mounted on the printer elsewhere. Fysetc has a skirt option that places these on the rear panel, which is an issue if you intend to use the filament runout sensor that was added in…
- Downloads
- 102
- Likes
- 30
- Rating
- 5
P
Printablesjaeseopark
Metabo C12RSH2S dust shroud
How to print Print the ports with the flat face down. You are going to need to rotate the model by 30 degrees to make it lay flat or use the ‘lay on face’ feature within your slicing software. You are going to need a small amount of…
- Downloads
- 100
- Likes
- 21
- Rating
- 0
P
Printables3DPrintsBF
M2R Warrior Pro Olight Mount/Charging-Dock
A charging dock or just a mount for the Olight M2R Warrior Pro. by playing aroundg with color changes, also "glow in the dark" is a litte gimmick ;-) Used 4 pieces of 8x3mm neodym magnets for the back…
- Downloads
- 99
- Likes
- 13
- Rating
- 0
P
PrintablesMasakari
Dust Cover for standard 6805-2RS bearings in Hollowtech II Bottom Bracket
Print solid with PETG, 0.1-0.16 layer height.
- Downloads
- 99
- Likes
- 7
- Rating
- 0
P
Printablesdancan13f
Clamps for speed levers extension of the Toyota 22RE Engine
These are clamps to improve the hold of speed levers of the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). References : https://www.thingiverse.com/thing:713815 https://www.thingiverse.com/thing:824415 Print instructions…
- Downloads
- 97
- Likes
- 17
- Rating
- 0
P
PrintablesGar Young
Creality LD002R Extractor fan shroud
Extractor fan shroud for Creality LD002R resin printer. Using standard PC cooling fan & 100mm flexible ducting pipe.
- Downloads
- 93
- Likes
- 12
- Rating
- 0
P
PrintablesStarwhooper
FT232RL Case for USB-C
i changes it a littlefit to make it suite to my ft232rl board
- Downloads
- 93
- Likes
- 3
- Rating
- 5
P
Printablesdancan13f
Electric Box Extension for the Toyota 22RE Engine
This is a dummy Electric Box for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). Print instructions Printer: Geeetech A10 Rafts: No Supports: Yes Resolution: 0.15mm Filament: Geeetech PLA Black and Silk Silver Print…
- Downloads
- 92
- Likes
- 14
- Rating
- 0
P
PrintablesRoed
Voron 0.2r1 Flat Mesh Skirts
Drop in replacement skirts in Flat Mesh style for the v0.2. This is designed after the design of TheJiral of his v2, Trident and v0.1 skirts. All skirts are modelled with the stock outer dimensions so they are a drop in replacement for…
- Downloads
- 91
- Likes
- 35
- Rating
- 0
P
PrintablesNightHawk
RPC1-12RB-6P(72) Connector
Since the RPC1-12RB-6P(72) is EOL I designed a 3D printed drop-in replacement for the AxxSolder project. Housing The housing can be sources from JLC3DP.com With the following parameters: MJF (NYLON) with PA12-HP Nylon PCB The gerber files…
- Downloads
- 88
- Likes
- 6
- Rating
- 0
P
Printablesdstarke
HW-417 Case (FT232RL)
A minimalistic case for the USB-TTL module HW-417, which uses FT232RL. This is widely available on AliExpress and co. The modul needs no support and assembly is done without screws or other tools. Printing: Layer height: 0.2mm Infill:…
- Downloads
- 86
- Likes
- 5
- Rating
- 5
P
PrintablesDanila Dergachev
BTT SFS V2.0 mount for Voron 0.2R1
Used 0.2R1 foot as original part, so if you use older variation, you will have to update all 4 feet and all of the skirts. Uses: 3 x M3x16 BHCS Use 3 spacers (included) to make clearance for the rear panel.
- Downloads
- 83
- Likes
- 14
- Rating
- 5
P
Printablesdriftrotor
Voron V0.2r1 Mellow Fly 3.5 inch Capacitive Touch Screen Skirt
As the title suggests, this will allow you to fit / use the Mellow Fly 3.5 inch V2 touch screen ( Capacitive ) This is an adapted version of the one that Schlongky and I have been working on for the Mini Fridge Door Skirts and carries…
- Downloads
- 80
- Likes
- 11
- Rating
- 0
P
PrintablesSachmer
Shell for garage door remote CAME TOPD2R
Replacement case for CAME TOPD2R remote
- Downloads
- 80
- Likes
- 8
- Rating
- 4
P
Printablesdriftrotor
Voron V0.2r1 Kat2Z
Kat2Z for your V0 after seeing a friends G2Z belted mod from HartK and being thoroughly impressed by it i wanted one for my own V0's https://github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%200/0.2/G2Z go check out his stuff! the…
- Downloads
- 79
- Likes
- 39
- Rating
- 0
P
PrintablesGeoGod
6708 2RS Radial Ball Bearing
Radial Ball Bearing with correct measurements with full STEP files
- Downloads
- 78
- Likes
- 2
- Rating
- 0
P
Printablesdancan13f
Hubcap Wheel extension of the Toyota 22RE Engine
These are Hubcap Wheel for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). his is an add-on for "Rear axle housing for open differential toyota third member" ( http://www.thingiverse.com/thing:1344938 ). It maintains…
- Downloads
- 77
- Likes
- 14
- Rating
- 0
P
Printableschiz
Creality LD-002R Lid Gasket
The right side of the lid on my Creality LD-002R MSLA printer is slightly warped and so even if I used this excellent air scrubber by redbot (thing:4423456), I can still smell the resin odor since the fumes leak out of the lid. I designed…
- Downloads
- 77
- Likes
- 17
- Rating
- 0
P
PrintablesFlying Gyroscope
Spool Holder for 2020 Extrusion (625-2RS Bearings)
This spool holder can mount to any printer with 2020 extrusion. (The fit was tested with LDO 2020 frame.) One side of the mount will stick out past the extrusion by about 9 mm because of the print orientation and size of the bearing. You…
- Downloads
- 77
- Likes
- 9
- Rating
- 0
P
PrintablesLiam
Destiny DTY-12R LMP Bumper
UPDATE 11/25/24: Added 2 new versions. Short bumper is designed to run bodies like the CRC Lola and the Long is for bodies like the CRC Toyota. Bumpers have also been rounded out. Printed with Overture TPU @ 20% infill
- Downloads
- 76
- Likes
- 6
- Rating
- 0
P
Printablescosetreddì
Action cam adapter to Ducati Monster S2R tank
This is an action camera adapter to install using the existing fuel tank cap holes. You will need some screws that are longer than the original ones. It is recommended to print the insert lying on its side and enable the supports. Then…
- Downloads
- 76
- Likes
- 14
- Rating
- 0
P
PrintablesBobdeBouwer
Voron 0.2r1 unified side skirt with mesh
Thanks to @AndrasBognar source file and @Lab3Dp for the inspiration, I remixed András his work to add a solid layer of 0.6mm. The r1 revision of the v0.2 has higher skirts than the regular v0.2. This model is for the r1 version only, for…
- Downloads
- 76
- Likes
- 13
- Rating
- 5
P
Printablesideat0m
Reel2Reel empty spool 7in/18cm NAB - aka Sony -AMS
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
- Downloads
- 76
- Likes
- 7
- Rating
- 0
P
Printablesideat0m
Reel2Reel empty spool 7inch / 18cm, aka Pioneer - Multicolor - for NAB
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
- Downloads
- 74
- Likes
- 9
- Rating
- 0
P
Printablesテッド
Handle for Creality LD-002R and LD-002H
Replace the QR code with an easy one hand grip designed to avoid resin drips.
- Downloads
- 74
- Likes
- 7
- Rating
- 5
P
Printablesdriftrotor
Voron V0.2R1 Klipper Expander Rear Skirt
INTRODUCING THE KLIPPER EXANDER RAER SKIRT FOR THE V0.2R1 after seeing and printing out RichardTHF's Klipper Expander mount / skirt (found here)…
- Downloads
- 73
- Likes
- 20
- Rating
- 5
P
PrintablesZakoplex
Voron V0.2r1 LDO Orbiter V2 extruder mounting parts and improved mini stealthburner
These are the the parts I made to mount an Orbiter 2 extruder on a Voron V0.2r1 including the improved mini-stealthburer. Super happy with the Orbiter 2 on the Voron V0.2r1. This is just a quickie post as I wanted to put them out there…
- Downloads
- 73
- Likes
- 19
- Rating
- 5
P
PrintablesOne7Seven
Bigtreetech BTT TFT43 display mount for the VORON V0.2r1
Remixed original model to make it suitable for Bigtreetech TFT43 display which has very similar dimensions but different mounting holes positions. Follow original model for assembly instructions and hardware. 4x M3 threaded inserts 2x M2…
- Downloads
- 73
- Likes
- 10
- Rating
- 5
P
PrintablesGmo
Voron V0.2r1 Double Shear AB Motor Mounts Using F695 Bearings
Remixed to use commonly used Voron F695 Bearings
- Downloads
- 72
- Likes
- 22
- Rating
- 0
P
PrintablesDer Echii
ASUS WiFi antenna stand (2T2R)
Holder for antenna if you lost original :D NO SUPPORTS
- Downloads
- 69
- Likes
- 5
- Rating
- 5
P
PrintablesKytor
SCART Brace for RetroTINK RGB2COMP and COMP2RGB
SCART. It delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Keep the SCART connector in place on your RetroTink RGB2COMP or COMP2RGB with this SCART-Brace. This is designed to be compatible with…
- Downloads
- 69
- Likes
- 18
- Rating
- 5
P
PrintablesKurt
Olight S1R/S2R flashlight arm
A way to utilize the flashlight in a static pose for hands-free lighting. I keep going back to Sneaks and his articulating arm design for most of my models because it works so well! I designed the flashlight mount base, the mount, and…
- Downloads
- 68
- Likes
- 9
- Rating
- 0
P
PrintablesPlasticPress
608 2rs Bearing Mount
simple mount for a 608 2rs bearing, uses m4 screws, and screws should sit flush. (since I am new to this please let me know if I made any mistakes, all feedback welcome)
- Downloads
- 68
- Likes
- 6
- Rating
- 5
P
PrintablesNejc
Creality LD-002R Double Angle Drip Mount no supports remix
I hate supports (waste of material IMHO) so I cut away a part of the drip mount so it now prints flush on bed. Yes, the overhang is a bit steep but it printed out good enough for me :) Note: This is a remix of:…
- Downloads
- 67
- Likes
- 3
- Rating
- 0
P
Printablescnnblike
Mini StealthBurner 0.2r1 klickyNG w/ hex pattern
This is a remix based off https://www.printables.com/model/368134-mini-stealth-burner-hex-face-remix-voron-v02 Took me a bit while to remix ‘cause I didn’t realize some one has already remixed and uploaded here:…
- Downloads
- 67
- Likes
- 11
- Rating
- 5
P
PrintablesTD1 3D
Wall mounted Spool Holder 608-2RS x2 Required
Wall mounted Spool holder Requires x2 608-2RS bearings 2x Heat inserts and 2x M3 10 to 12 mm screws Ideal for any printer.
- Downloads
- 66
- Likes
- 7
- Rating
- 4
P
PrintablesLukas F
Ducati Monster S2R/S4R gear leaver
Ducati monster S2R gear leaver i made for quick recovery from crash. Still working after 5000km. Maybe some upgrades will be made. Printed in cheapest PLA with 100% infill, works like a charm.
- Downloads
- 65
- Likes
- 13
- Rating
- 0
P
PrintablesDaniel Zeman
Nice Remote Cover ON2E / FLO2RE
EN: Cover for Nice remote controls ON2E / FLO2RE with 2 buttons. Main purpose of this cover is protection against on accidental triggering of very sensitive buttons while remote is in pocket etc…. Printed from PLA with 0,2mm layer - 15%…
- Downloads
- 62
- Likes
- 3
- Rating
- 0
P
Printableschiz
Creality LD-002R Adjustable Feet
This is an adjustable feet intended as direct replacement of the factory-supplied rubber feet on the Creality LD-002R. Directions: Print without supports as oriented in the STL files. Remove the rubber feet from the LD-002R using M3 key.…
- Downloads
- 61
- Likes
- 10
- Rating
- 5
P
PrintablesBitmag
Cessna 172RG Instrument Panel Nut
My version of Cessna 172RG Instrument Panel Nut replacement.
- Downloads
- 61
- Likes
- 5
- Rating
- 0
P
PrintablesCyclimbo
LD002R LD002H Vat
Altered the design to use m3 heat set inserts. Category: 3D Printer Parts
- Downloads
- 61
- Likes
- 4
- Rating
- 0
P
PrintablesDr. Slithers 3D
SV06 Filament sensor mount with 608 2RS bearing
This is a remix of two prior SV06 filament sensor mounts designed to accommodate a larger ball bearing 8mm x 22mm x 7mm https://www.printables.com/model/384065-sovol-sv06-f688zz-filament-runout-sensor-mount…
- Downloads
- 60
- Likes
- 11
- Rating
- 5