Counting matching models…
This upgraded version of the case keeps your bullets safe and covered. Fits better in your pocket thanks to its more oval shape. The clip that holds the lid in place is stronger. Tolerances in the model are increased.
After using "IQOS TEREA/HEETS 1x10 clip case 2019" we knew 10 bullets it's not enough. So here is a 2x10 catalog. Perimeters: 5
Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 100…
Collection of screws (ISO 4017 / DIN 933) including : M12x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
A simple 2x2x10 bin to hold post it notes in the gridfinity system.
Hexagonal junction box with plain screwed lid - Cassetta di derivazione esagonale con coperchio basso a vite External dimensions - Dimensioni Esterne 112x100x50mm Surface-mounting enclosure Suitable for: Resize to adjust dimension All our…
Plate 2 x 10 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…
Wiha 31115 Phillips Screwdriver with SoftFinish Handle, 2 x 100mm PH2x100 You can find the step files here: https://www.printables.com/model/656202-screw-driver-wiha-honeycomb-storage-wall-step-file
For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent
Collection of set screws (ISO 4028 / DIN 916) including : M12x 10, 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
Holds 2x10 cables, hole diameter 7.4mm
Inspired by this NM's project at https://makerworld.com/en/models/2413050-3d-scanned-snapmaker-u1-toolhead#profileId-2645877, I decided to make a model from scratch of my Snapmaker U1 toolhead and design a proper gridfinity for it. I used…
Needed adapters for my new gravel bike. Already had them for my boost spacing mountain bike. PETG for temperature and exposure 100% infill print upside down
This is visor for 2x10W headlight which is used also for Nami Burn-e e-scooter. (Also called as " Work light 12V " on Aliexpress. When you switch lens from original 6D floodlight to 2D lens, this visor helps to to cutoff your light to not…
Electric motor fan, ventilator 12x105mm
Trying to make a case for my new needle files. I am looking to design the case to be simple, reliable, and compact, with a see-through lid and easy access to the files. Not a big fan of including a hinge, I've done something similar, the…
didnt have 2x20 screws so i made some changes to accomodate smaller screws
Collection of screws (ISO 10642 / DIN 7991) including : M12x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
Keeps your Glo Neo bullets covered and safe. Perimeters: 5
This is an adapter for Quick Release forks to Thru Axle mounts. I have Kuat Dirtbag Thru Axle mount that I use with my Disc brake bikes. I wanted to be able to mount a Quick Release bike so I made this adapter that fits inside the Thru…
Kitchen organizer Box 22x22x10cm I use it for car slleping build Print settings 0,2mm layer 5 walls 15% infill no supports
Inspired by primo's sewing thread spool box , combined with the endless possibilities of gridfinity this small box stores up to 10 spools with diameters up to 20 mm, holes larger than 6.5 mm and heights not exceeding 64 mm. There is even…
this variant is made for sanding pads 152x105mm, 3 slots, each 25mm thick, labeled with 60/120/180 You need M3x25 Screws for that
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Kitchen cutlery organizer Box 22x22x10cm I use it for car slleping build three areas for organising cutlery and other kitchen tools Print settings 0,2mm layer 5 walls 15% infill no supports
A bigger vesrsion of mine simple token holder, great for board games. You can storage multiple boxes on each other. In 3mf file is added modifier that make bottom like on photo (honeycomb). STL file got flat bottom.
Kunststoffteile für eine Photovoltaik-Mast-Halterung für zwei Panele (900x670mm). Angegeben sind unten die Teile für meine Konstruktion, natürlich sind wie immer anpassungen möglich ganz nach euren bedürfnissen. Für meine Halterung werden…
Make sure and share your makes and if you like it please give it a ❤ LIKE! I was asked to use e-ink displays from Waveshare to create reusable and customizable name badges. So I did. These are simple to print. Print them face down with…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
12x1000 target sticker dispenser. printed with petg, no supports, default infill (15-25%) for light use, 100% infill for club use
LEGO DUPLO-compatible Brick 2x10 Design ID: 2291 Printing information The STL file is correctly aligned. Layer height: 0.2 mm Perimeter: 2 Infill: 100 % Support: no I am looking forward to your Makes! :-) If you like this design, feel…
This is a 20x52x10 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 20mm External diameter : 52mm Width : 10mm Balls : 8 POM ball…
To organize during calls
Remixed to use (2) 10mm magnets. Secure magnets with a few drops of CA glue. Put a piece of electric tape over the magnets for better grip on the metal surface.
I was looking for a small drawer for my familiy for floss and toothpicks, so they can't get mixed up - eww. Haven't found anything that fit my needs, so I created a print-in-place solution for that. Size, as in the title: 2x2x10u Magnets:…
Eine Abdeckung für einen 22x10 Kabelkanal
INFO: This board is compatible with regular Teck Deck trucks, and should work with many other trucks. This is a flat blank that uses a mold that will shape it into it's correct shape. Mold Used: https://www.thingiverse.com/thing:4426394…
USB storage for 2 x 10 and 3 x 8 dongles/adapters v1.1 now has hidden clips and no longer needs supports! Print v1.0 at a 45 degree angle for maximum strength of the clips Print v1.1 on the side with the slots pointing up
This is a 30x62x10 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 30mm External diameter : 62mm Width : 10mm Balls : 10 POM ball…
A holder for 100x10 mm LED strips. Based on "LED Strip Holder for Prusa Lack Enclosure" but recreated from scratch. This was designed to work with “JOYLIT 24V LED Strip” and “VIPMOON L Shape 2 Pin LED Connectors” but may work with others.…
CR2032 Battery Storage 2x10 v1.0
This is a modification of 6d6178 's “ Arducam B0205 1080P Day & Night Vision USB Camera Case ”. I've made the screw recess on the front deeper to accommodate a shorter screw, and increased the size of the opening to accommodate larger…
Description: Breathe new life into your classic Tacx Spider Team T3050 workstand! This adapter allows you to mount modern road bikes and gravel bikes with 12x100mm front thru-axles. Unlike other adapters, this design does not require you…
Designed for 300x52x100 2kg spool desktop stand holder check your spool dimensions before printing Rod is 48mm in diameter and 130mm wide disclaimer: finally I didn't need one so I haven't make one, not sure if OK although FreeCAD…
T096_case_back for 2x103665 battery
A 2x10 LEGO compatible plate with 3 cutouts for Cherry MX Switches. You'll need keycaps that are not too much wider than the switch itself, due to non-standard spacing between the switches and boundaries of the lego plate (I used these…
Can hold two spray bottles (typically 100ml). Max. bottle diameter is 40 mm (see picture). I use these bottles with Isopropanol for cleaning the print bed. One version is clean, the other one has text “Isopropanol” on the front.
I updated this model to use M2x10 thread forming screws. This is completely a personal preference modification. If you want a full muffler and exhaust system please check out my page as it has all of this. Full Exhaust System:…
A simple box for small items, perfect for a desk, with dimensions 15x12x10 cm.
Questa scatola porta minuterie, ispirata al rinomato marchio Parkside, è stata realizzata con cura mediante stampa 3D, garantendo un design robusto e funzionale. Ideale per organizzare viti, bulloni, chiodi e piccoli attrezzi, la scatola…
I made exhaust tips to print in size 2x89mm and 2x101mm With this pieces I (and you) can check the fitment of these sizes in your rear bumper/diffuser when your are intended to buy new exhaust tips for your car.
stojan pro fotku 15.2x10mm
I designed a cigarette and cigarette products box, the box is 12x10 cm or 120x100mm, the box includes three different areas, one for the rolling pages, one for the tobacco and one for the filters. I hope you like the design. Print…
Hello! I made low poly well for anyone who likes this style! The dimensions are 112x112x100 cm. Material or printer is up to you! If there's something wrong, DM me and I'll will try to fix it! Thanks. EDIT: There's something sticking out…
You will need to use supports on the round part of the model. I recommend to print it laying on it's side for best stability during and after printing. The part that holds the casters in place for the upper rack in the GSD3200JWW…
a quite simple and small holder/organizer for ¼ hex bit (6.35mm), two rows of 10 slots. it has two bolts on the side in order to fix it anywhere, or you can simply leave it loose. printed in E-Sun PLA Basic, 10% infill, 3 walls and 1mm…
CR2025 Battery Storage 2x10 v1.0
I have used the following 12x10 mm magnets but others will likely work as well. https://www.magnetz.dk/products/power-magnet-skive-12x10-mm?_pos=1&_psq=12x10&_ss=e&_v=1.0
Welcome to Series 02 of the Modular Brick System! This collection expands your building capabilities with 9 essential standard-height bricks, ranging from 2x2 to 2x10. These classic double-width 2xN pieces are the backbone of any sturdy…
Smart Workflow Rows (+2 Extra Rows): Features two additional rows to prevent confusion. Move your tubes one row forward after processing to easily track your progress. At the front, I put changeable signs to number the racks.
Simple dial that push fits onto 12x10 mm tube. Print settings: Nozzle temp: 220°C (215°C 1'st layer) Bed temp: 60°C Speed: default 0.3mm from Prusa Slicer Printed on i3 MK3S+
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Voron V0.2 R1 XY Joints with M2x10 holes resized to 1.9mm onshape link: https://cad.onshape.com/documents/929e410f32ed72
Label Plate for Brother 62x100 DK-11202 For labeling items on a metal shelf.
Hello! I made low poly well for anyone who likes this style! The dimensions are 112x112x100 cm. Material or printer is up to you! If there's something wrong, DM me and I'll will try to fix it! Thanks. EDIT: There's something sticking out…
Voron V0.2 R1 XY Joints with M2x10 holes resized to 1.9mm onshape link: https://cad.onshape.com/documents/929e410f32ed72
Collection of screws (ISO 10642 / DIN 7991) including : M12x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
