Counting matching models…
This is a mount for two 68mm x 37mm 60mA @ 5v solar cells that presents them at 55 degrees. For my use it is intended to be mounted to the front door of a Meshtastic node enclosure where the panels are in parallel, fed through the…
Slight remix of @B4rt0's LG C2 42" risers. This model has a 50mm rise to accommodate slightly taller soundbars, and chamfered edges for a different look. Due to the increased 10mm rise, the bottom flares out for extra stability.
Yet another bird feeder. Thread fits 37mm milk bottle. Standard water bottles gets clogged by sunflower seeds. Print Settings Printer Brand: Anet Printer: A6 **Rafts:** No Supports: No **Resolution:** .2 Infill: 30 **Filament:** fiber3d…
CPL filters available to buy for this dashcam are insanely overpriced and pretty flimsy looking. A generic 37mm filter is way cheaper and, with this adapter, you can put other filters too. 37mm happens to be a perfect filter size as it…
Roborock 37mm pipe edition filter deep clean adaptor/रोबोरॉक 37 मिमी पाइप संस्करण फिल्टर डीप क्लीन एडॉप्टर /Roborock 37mm 管道版過濾器深度清潔適配器 Robotics For my Roborock S5+ (and other types) I always clean the filter after vacuuming, so I decided…
A 3D printable bearing that spins well (0.3mm clearance between two races). No ball bearings needed. Feel free to use lubricant to improve longevity! Note: Second Image = V2 (races won't come apart); Third Image = V1 (races WILL come apart)
ired of messy cables? This organizer is designed to fit perfectly on 37mm thick desks. It provides a secure grip to manage your power cords and USB cables. For the tech enthusiasts, I’ve included CAE stress analysis screenshots in the…
DE: Dieses 3D-gedruckte Scharnier besteht aus zwei stabilen Scharnierblättern mit einem Gelenk bestehen aus 3 Elementen. Mehrere Bohrungen ermöglichen eine einfache und sichere Montage. Ideal für funktionale Anwendungen im Innenbereich…
This model is compatible with the lego system.
Filament used: PETG-CF, PETG 0.2 layer I couldn't find any front cap for 37mm so i made one.
This is a mount for 8 channels (137mm x 50mm) relay (holes at 44.7mm x 131.5mm). Supposed to be used with 2 clips from https://www.printables.com/fr/model/303480-din-rail-raspberry-pi-34-holder M2x16mm screws required. Printed with…
A big 10x37mm bullet inside of an even bigger 18x72mm casing. Kinda useless, since the primer's already been struck, and there's not single gun chambered in this. Not made for multicolor printing, but feel free to try.
I redesigned the Flycore to have more crush with Worker Hurricane Flywheels. (Root diam. 25,75mm)
I struggled finding a simple adapter for the exact combo of Makita LXT tools I have. None of the ones I found are fitting. I recommend this as a simple CAD excercise, since it is simple and basic shapes. But in case you cant be bothered,…
Threaded multipiece tube that can be used to store an audio boom pole of 737mm or shorter length
This is a simple remix of https://www.printables.com/model/268454-filament-spool-desiccant-canister.
A Gridfinity holder for a 50 CC / ml / 37mm bottle. Prevents the bottle from falling over and potentially spilling onto your bench. Has holes for either 6mmx2mm magnets or M3x6mm countersunk head screws depending on your preference. Used…
Musterplatte - Bohrungen - Ø1-37mm - 200x215x5 - Zip: P-Touch Editor-Datei Versionen: Prusa Slicer: Infill Prusa Slicer: Oberflächen
This is a mount for the Arducam OV9281 UVC USB, It includes a 37mm lens filter thread, so you can add a filter over the lens to keep it from being damaged in competition, or to filter out light glares. I found that the original lens of…
This is a mount for two 68mm x 37mm 60mA @ 5v solar cells that presents them at 55 degrees. For my use it is intended to be mounted to the front door of a Meshtastic node enclosure where the panels are in parallel, fed through the…
Slight remix of @B4rt0's LG C2 42" risers. This model has a 50mm rise to accommodate slightly taller soundbars, and chamfered edges for a different look. Due to the increased 10mm rise, the bottom flares out for extra stability.
This is a 2.0 version of my previous model: https://www.printables.com/model/816836-cacaolat-bottle-hanger Made it lighter and using less filament. Featuring a 45º inclined hole to screw it directly to any surface. In my case I put a 10mm…
Put the adapter ring over the hood barrel Screw the hood barrel into the hood Screw the finished lens hood on to the Sony
A G36 picatinny carry handle shortened to fit the short version of the nameless 37mm signaling device.
To be used with any of amazon's or Aliexpress cheap fork seal driver kit similar to the following Use your slice to cut it in half vertically, preserving the face. Check out the amazon link to see how it should be done.
Modified Version of the Lensecover with an attachment loop to put a line through and attach it to the camra.
I love this model, however it didn't fit my toilet rolls with 37mm inner diameter so I added a version where the cylinders have been replaced. The new cylinders are backward compatible with the parts from the original model. The original…
I modified the parts of the bracket made by Tom Cichowicz for the PASTAMATIC to adapt them to KYZ Design's PASTA Lite. I've made the same bracket compatible for 37mm motors with centered or eccentric axis. Assembly will require 2 M6x50…
Makita SG1251J 34mm to 37mm vacuum cleaner connector my parkside vacuum cleaner
Useful for mounting these motors to any plate. Fits the GA37RG motor from Greartisan that is used for the Pastamatic Dual Motor mod from kevman Sized for the M3 31mm diameter bolt circle on the faces and counterbored for a SHCS. I castled…
Yet another bird feeder. Thread fits 37mm milk bottle. Standard water bottles gets clogged by sunflower seeds. Print Settings Printer Brand: Anet Printer: A6 **Rafts:** No Supports: No **Resolution:** .2 Infill: 30 **Filament:** fiber3d…
Push-on adapter with 37mm filter thread for my almost 100 years old camera :) on't know how useful will it be for anyone else but I wanted to share anyway. The lens barrel is ~37mm in diameter. It might fit other lenses with same…
Adapter um Proxxon Micromot Geräte mit 20mm Aufnahme in eine Bohrmaschinen Tischklemme einzuspannen. Eine Version für meine alte Tischklemme mit dem ungewöhnlichen Durchmesser 37mm, die Zweite für den normalen 43mm Euro Spannhals…
Wheels for RC Crawler with 12mm hex, for 137mm (2.2inch) Tires
This is a replacement float (37mm diameter) for the rain gauge that fits a 40mm rain gauge cylinder. Printing tips For FDM printer print with 1 perimeter and on its side with supports (organic) For SLA printing I recommend punch holes to…
Lens hood for C-mount 16mm manual lens (37mm thread 0.75mm pitch). Models include 2 versions (smooth or jagged inside for low-reflective treatment), hood cap, and a rear spacer for use with IMX585 starlighteye module by Will Whang . The…
This adapter screws on to your Sony Digital Mavica or any other 37mm threaded camera so you can use it to reliably take photographs on most telescopes. I do not recommend using this option over any traditional astrophotography setup, it…
Original project page (including FreeCAD files): https://github.com/rimio/parametric-cokin-p-holder Read the description of the original model for instructions. Both the separator plate & spring holder need to be downloaded from the…
After purchasing two Unifi G6 Instant camera's for the Prusa MK4 and Core One I noticed they are extremely blurry when using for close ups. I opened up one G6 to see if I could adjust the focus. There is a LOT of layers of electronics…
Angepasstes Model für einen Münzkoffer im S-Format. Beispielsweise der Cargo S6 (Google hilft bei der Suche). Hier haben alle Münzen der Lunar 3 Serie in folgenden Stückelungen mit den mitgelieferten Münzkapseln der Perth Mint Platz:…
This model is based dimensionally on the Exotic Ammo machined aluminum hulls. It is meant to be more or less disposable. This is meant for those with knowledge of loading/reloading such rounds, though it can also be used as a prop for…
I am using octoprint with my prusa 2.5s so i have been doing a few timelapse videos of prints , I have a few of these C930e cameras laying around so made a clip on lens holder to hold a standard 37mm screw on filter to reduce glare with a…
This is a vent hose adapter for the Halot Mage [non pro version]. It fits Creality's Halot Mage vent hose which I believe is for the pro version. Regardless, it's meant to fit inside 37mm hoses/tubes. Depending on your printer and…
These are two Wahl clipper guides in 2 inch (50mm) and 1.5 inch (37mm) sizes. Should work with most 1.87 inch (47.6mm) max. wide Wahl style clipper blades. They are intended to be used with the clipper horizontally, on the side parallel…
CPL filters available to buy for this dashcam are insanely overpriced and pretty flimsy looking. A generic 37mm filter is way cheaper and, with this adapter, you can put other filters too. 37mm happens to be a perfect filter size as it…
I moved the HSW Insert down to the printbed to print without supports and made the holder 7mm longer for more safe grip for the pliers.
This is a remix of the base and LED ring light holder for the Minecraft Ore Lamp https://www.printables.com/model/1460361-minecraft-ore-lamp-wled-esp32-d1-mini-usb-c Here are the parts I ordered for this remix (As an Amazon Associate I…
Print & Assembly 0.2mm PLA, 15% infill (default quality profile in PrusaSlicer). Orientation as provided in STL. Parts glued together with Gorilla super glue gel. Ensure parts have adequate time to dry otherwise they will separate in use.
I couldn't find the right model of detachable protective reel for double-sided adhesive tape inner diameter of spool 37mm enjoy
A long toolhead or bulky Tap will probably be unable to reach it This relies on the toolhead being pressed into the brush by its weight, so the probe might get triggered. The aluminum extrusion heats up considerably if you're into high…
A long toolhead or bulky Tap will probably be unable to reach it This relies on the toolhead being pressed into the brush by its weight, so the probe might get triggered. The aluminum extrusion heats up considerably if you're into high…
Roborock 37mm pipe edition filter deep clean adaptor/रोबोरॉक 37 मिमी पाइप संस्करण फिल्टर डीप क्लीन एडॉप्टर /Roborock 37mm 管道版過濾器深度清潔適配器 Robotics For my Roborock S5+ (and other types) I always clean the filter after vacuuming, so I decided…
I bought a cheap CPL Filter with mount for the phone https://www.amazon.com.au/dp/B0DGFG6BHY?ref=ppx_yo2ov_dt_b_fed_asin_title . Decided to adapt it to the Gopro then a few others with adaptors. Printed 0.15 layer height due to fine…
it makes any 37mm universal Adapter perfectly match for DJI Osmo Action 4 without buying the expensive adapter. Print with TPU 95A 100% infill make sure to set the z seam not random
Pending description after investigation. This is merely a place holder. I have primarily placed this here so that it's easier to find. I frequent printables far more than I do Qidi's wiki page, I would imagine that the same is true for…
A 3D printable bearing that spins well (0.3mm clearance between two races). No ball bearings needed. Feel free to use lubricant to improve longevity! Note: Second Image = V2 (races won't come apart); Third Image = V1 (races WILL come apart)
ired of messy cables? This organizer is designed to fit perfectly on 37mm thick desks. It provides a secure grip to manage your power cords and USB cables. For the tech enthusiasts, I’ve included CAE stress analysis screenshots in the…
DE: Dieses 3D-gedruckte Scharnier besteht aus zwei stabilen Scharnierblättern mit einem Gelenk bestehen aus 3 Elementen. Mehrere Bohrungen ermöglichen eine einfache und sichere Montage. Ideal für funktionale Anwendungen im Innenbereich…
Remix of the original 58 mm Canon lens hood. I simply scaled the model to fit the APEXEL 37 mm 0.45× wide-angle + macro lens kit . The outer diameter of this lens is 51 mm , so the hood now fits tightly on that body size. Works well for…
This model is compatible with the lego system.
This model is compatible with the lego system.
this is a gridinfinity box for drill bit or cylindrical of 37mm of diameter and 121mm of lenght
osVAC Neo M32 adapter for a 37mm Vacuum pipe Should work for other tools with 37 (,05)mm outside diameter
Brackets for hanging filament spools on 1" EMT conduit from boltless (rivet-style) shelving. A remix of the DowelMonkey Filament Shelf Brackets: the screw holes are gone, replaced with integrated rivets that drop into standard 37mm-spaced…
Add a skirt if you have problems keeping it on the bed. Can be scaled up if you wish. i print it at 101% in ABS
Bike CO2 mount to be used on a 36,76mm diameter tube, but has been tested on a 31mm seatpost (look the images) with no problem. UPDATE (22/01/2022) : Added 25g CO2 holder for 31,6mm, 30,9mm and 27,2mm seat post. The measured 25g CO2…
Réducteur pour installer un presse-étoupe de 20mm dans une boite de dérivation avec trou de 37mm. Pièce à imprimer 2 fois.
Screw head 11 mm in diameter Screw 6 mm in diameter (¼-20)
Just usin it for the Original Hose to fit on a cyclone. Printer Settings: Printer: Creality Ender 2 Infill: 25%-30% Supports: Yes all Raft: not necessary / Speed: Mid 30-60mm/S Material: ESun EPA-CF
I made this remix to fit my own lens cap sizes. Made two strap sizes to fit mine one for 25mm straps and one for 37mm straps.
Tutorial : All u need to do is just print the model and press the adapter ring in to the 3d model's hole !!! and put it on your sx-70!!! Very simple job AND HERE IS THE MATERIAL LIST material list： ****all these u can find much cheaper…
Luftfilter Schalldämpfer für Chinaroller. Macht das Ansauggeräusch bei Vollgas etwas leiser. Würde je nachdem zu ABS raten, bisher hält das PETG aber sehr gut. Bitte den Innendurchmesser des Schnorchels messen und dann entsprechend im…
I like the original honeycomb box, but it is too small to hold my glue bottle. I did the lazy thing, here, and remixed the original to my specific needs. All I did was: import the original model into Microsoft 3D Builder split the hex…
Created 37mm standoffs/spacer to use with my MKS Monster8 cooling fan ( https://www.thingiverse.com/thing:5428059 ) and DIN mount ( https://www.thingiverse.com/thing:5428083 ). The hole is big enough to fit M3 screws. Print Settings…
Customized version of https://www.thingiverse.com/thing:3076954 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3076954 Instructions Using the following options: cutoutDiameter = 37 Category: Machine Tools
I found this nice looking feet on Thingi but i wanted something i can use with the original rubber feet. So i remixed this one. Now you can use the original rubber feet and raise the Ender 5 Plus up to 37mm. I added a small 3mm deepening…
55 x 3mm disc 37mm ID for tealight for slightly upscaled lithophane bell.
It should fit on a 37mm diameter pipe and the ball diameter should fit any car holder on the market. I would advise inserting a 4mm screw inside for extra strength. Mine broke in between the layers even with the screw, but it remained in…
With this 90 degree adapter you can comfortably connect for example an electric planer with a vacuum cleaner (Festool).
This is a cleaning tool designed to clean the bore of 40mm and 37mm grenade launchers. Included are two basic versions: 40mm and 37mm. The 40mm includes two different tips, a 37mm and a tighter fit 39mm. I typically use the 37mm which…
These O rings that should work: https://www.amazon.com/Nitrile-Rubber-Rings-Metric-Sealing/dp/B0BFMWKP79/ https://www.amazon.com/uxcell-Rings-Nitrile-Rubber-Diameter/dp/B07W72F7RF…
much larger to increase the glass 37mm higher, help lower heat at top, help give a much smoother angle for the PTFE tube, also LED could be added, holds glass and lip is only 2.5mm so it don't stick up above the glass so edge won't get…
Simple threaded cap using right-hand ISO Pipe threads with a designation of G16.662x1.337 (Class A). Created to test where my PureWash system is leaking. Needed to plug some known-working areas while unit is disassembled.
This is a wheel I designed as a replacement for my lawnmower, where the original has too much friction and a bad way of fixing it, so it kept getting loose. Might be useful for other projects too. It needs two 608 bearings and 8mm bolt of…
Leider ist bei dem 3x4 Meter Garten Pavillon von Amazon mit 37mm Rohrrahmen der Dachstoff so dünn, dass sich nach dem ersten Regen Wassersäcke gebildet haben. Also schnell in den Globus Baumarkt gefahren und 6 Stück Hutprofile in 2,6m…
A remix of a lens cover, this time to suit holding a 37mm camera filter. Designed to use a polarising filter. The tolerances ended up being exactly tight enough for a press fit, but the holder was originally designed to have a plate…
i have adapted the holders for 37mm and 42mm pliers. In addition, I removed a little material from the underside so that the print bed adhesion is better
![Halot Mage [Non-Pro & Pro] 37mm Vent Hose Adapter](https://media.printables.com/media/prints/d06cd306-e89c-4289-8311-9298a7a7fe67/images/10318651_6406660a-d94d-4060-85a9-487d88824ada_0eb0198f-c4ff-4279-aeaa-e795a90bae7c/screenshot_20250726_132340_gallery.png)
