Counting matching models…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
This is an old video I made as a quick showcase some time ago and will be replaced with another better one soon: IMPORTANT NOTE Even this LED cube is much much easier to assemble than my previous “ Geodesic(k) RGB LED Spheres ” , it still…
Support only needed for the Motorpod! Screws: 4x M4 x 25 V2A / 2x M5 x 16 V2A / Inserts: 2x M5 https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I bought a used Rescue Helicopter, but there was the Pin missing to hold the Rotor Blades. So i made a replacement. Print the Part sideways, so that the print get the Maximum Material stability, and doesnt brake.
This model is compatible with the lego system.
This model is compatible with the lego system.
efoil Motorpod 6374/6384/63100 Mast: Slingshot, Axis, Gong V2 Screws: 4xM3X8 / 2x M4x45 / 4x M4x30 Nuts: 2xM4 / 4xM3 Motorbase: TPU or PETG Filament: Extrudr PETG-CF…
These are 3D printable parts that are designed to allow FRC teams to quickly prototype mechanisms. They are inspired by the various other 3D printable prototyping systems such as HYPEblocks, Quick Build Connectors, Protopipe, etc.…
This collar is based on the AndyMark am-1526 hex collar. This should be used for light-duty applications and prototypes We recommend buying the am-1526 for higher load applications. The collar is to be used on ½" Hex shaft. Use with a ½"…
This model is compatible with the lego system.
This model is compatible with the lego system.
**Updated model again - I updated the model so the mount is shorter (less swing weight), main change is I inverted the dove tail. * Updated mode l - The file title with "update" has a small change where I rounded off the leading edge of…
This model is compatible with the lego system.
Note: I made an updated version of this pod that uses zip ties to secure it. There is much less play in it, I recommend using that new model: ____________________________________________________________________________________ This is a…
This model is compatible with the lego system.
Print Settings PETG height 0.2 no-supports infill 20% external perimeter first perimeters 4 solid layers bottom 5 top 3 seam aligned speed 80 no fan bridge/overhange speed 10 fan 80% width default 0.7 infill 0.5 Print settings for the fit…
A low-profile Quest 3s mount. Designed to be bolted to a 1" or 0.5" grid pattern. The Quest 3s should be held on with zip ties or velcro straps. Onshape File:…
Snap together case for HW-384 buck converter . I prefer PETG because I had problems with PLA tabs snapping off when putting the top on. There are standoffs on the base for wire clearance and ridges in the walls to snap the PCB into. I use…
Updated to keep the front bearing secure without having to epoxy it in. I designed this motor pod to mount a 6384 motor to a soft top surfboard. The 3 phase wires run internally and I use 12awg silicone wires. I use either ASA or PETG,…
This is another update for my foil assist motor mount, this version is shorter than my previous version so there is less swing weight. I recommend printing the cone off in 95A or 64D TPU and the mount in a stiff filament. The big change…
6384 Motor / Rotor Puller you need: 1 x M5x40-55 Screw 4x M4x20 Screw 1x M5 Insert
This is a motor pod for a generic 6384 out runner motor I use for my tow boogie. I upgraded it to put the wires down the back for strength and to use 10awg motor wires. You have to modify the motor by cutting a small part off for the…
This model is compatible with the lego system.
Need to add Heat Set Inserts from flat face to Fit the 3mm bolts supplied with Hub, you will need an additional 4 of these bolts to bolt adapter to motor.
Onshape CAD link for those interested in making changes in the design: https://cad.onshape.com/documents/143c740f42cb21cc45906fdf/w/4bc4bac1614f8c690bb5c467/e/82f31ec3f743aeb42d9d5409 Changes, 19/5/26 - added file for old housing…
Plating on 384 well plate can be very exhausting and making one mistake makes the analysis super complicated. With my labmates I made this 384 well PCR stencil, which you could put on top of the plate to visualise smaller sections of the…
3 Blade Prop Hub for Flipsky or Generic 6384 Waterproof Motor. Using 3mm bolts for the blades. This has been updated June 2026 with some extra thickness around the bolt inserts to help prevent cracking. I print with 6 walls, 65% infill,…
Cookie stamp Pi 3,14159265358979323846
Vase Mode Eppi Racks (4–384 Spaces) Vase-mode reaction tube holders in a range of sizes for common lab tubes (e.g. Eppendorf tubes). They’re sturdy yet lightweight, and can be printed quickly in vase mode (follow the print instructions!).…
These are two models for clockwise and counterclockwise propellers to be used with a 2 blade hub of an 4.8" propeller.
Vase Mode Cuvette Racks (4–384 Spaces) Vase-mode cuvettes holders in a range of sizes for standard 10 mm cuvettes (e.g. Eppendorf, Brand, Sarstedt). They’re sturdy yet lightweight, and can be printed quickly in vase mode (follow the print…
I have built from scratch a foil assist unit, and I want to share the process with anyone interested. I have provided the written steps for my build, so please don't forget to download the PDF files. My goal was to build a motorized foil…
Shim to fit between new type Flipsky 6384 waterproof motor and foil drive propeller hub
## Full Description Missing the front bezel on your Zebra TLP3842, GC420d, or LP2844 thermal label printer? This 3D-printed replacement bezel / front cover stops labels from wrapping round the roller, restores a tidy look, and keeps your…
This is the interior part for a E21384 bay window lock (the pins break too easily and don't close the bay). We replaced this thing by another one that cost him almost 30€ and broke again in less than a year. So i tried to design one a bit…
Test prop for Hayden
Holder for a 384-well plate. Used to stop plates from slipping around in an ice box. Category: Biology
Battery holders for SR41 or LR41 or 384/392 are impossible to find and so here is an adapter that allows for the use of a widely available CR2032 battery holder as long as the electrodes are on top and bottom. This won't work with a…
This is replacement part for Suzuki Sx4/Splash/Swift. Part number: 38451-77J00 It has been printed with TPU 95A. The part is to be printed with the logo facing the build plate. Testing: This printed part has been real-world tested on…
Gridfinity dashboard module for 14" 3840x1100 ultra-wide touch screen I used this display: https://www.aliexpress.com/item/1005003332731770.html Requires interface plates and magnets to connect to a Gridfinity base plate . Requires 3 x…
Vase Mode FACS Tube Racks (4–384 Spaces) Vase-mode FACS tube holders in a range of sizes for standard 12x75mm tubes (BD/CytoFlex). They’re sturdy yet lightweight, and can be printed quickly in vase mode (follow the print instructions!).…
This will replace a Toro curved washer (part no. 107-3844). It has been improved by including a flat side so it will fit better and be more durable. Recommended to print at .2mm or finer, and infill at 100%.
Let's you quickly tell if a bearing is a Round, Rounded Hex (Thunderhex), or Hex. It's common for people to use a ½" rounded hex bearing instead of a ½" round bearing, and this quick gauge lets you check the size of the bearing opening.…
Volvo Penta Fitting 23238467 3883597 + key Material: ABS Infill density 100 %
This model is compatible with the lego system.
Uses 2x ⅝” OD bearings. R4 bearings If using a standard number #10 bolt use ¼” OD 0.194” ID aluminum tube as a spacer https://www.mcmaster.com/catalog/129/190/9390N12 You can use a 1/4:” shoulder, 10-32 bolt which is the preferred option…
When I moved to my new appartment, the first thing that broke was a plastic part of one of my IKEA BERNHARD barstools. As Ikea was not able to provide a replacement part, I went with my 3D printer and created the part myself. Now the…
I This is for the following product https://www.aliexpress.com/item/1005004407649001.html?spm=a2g0o.order_list.0.0.8ec01802ioh7Xm Mounts to any 20x20 extrusion via the modular case parts. The case is held together via 4 M2 self tapping…
My Ikea Malm bed had a missing plastic part and a small job for my 3d printer later I had it solved :) A very easy design, but might be useful if your part is missing or worn out. Print Settings Printer Brand: Prusa Printer: i3 MK2S…
AK Integrated Foil Drive Mast to Flipsky 6384 Motor Puck. STL and Step file included. Printed on Creality K1C with PTEG-cf. I adjusted size to get a super snug fit in the mast.
ORGANIZZATORE GT384 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Replacement lid for the water inlet on a Bunn VPR. The replacement part number is 38498.1000 on the Bunn VPR coffee brewer (PN: 33200.0001).
This propeller fits a 6384 brushless outrunner for an efoil or foil assist. I made this for a Flipsky motor but it can fit other motors that are similar. Requires two stainless 4mm bolts and lock nuts. Print in PETG or CF Nylon, etc...…
The repair contest pushed me to do and publish this model. There's a plastic part (probably ABS) of the gripper mechanism which recently snapped in the thinnest point after several years of use (mostly to grab fallen half-rotten apples in…
Hier ein sonoff tastamo Halter zur Montage in einer Obi t60 Abzweigdose
Spectrum Photon Models with the prism base, round base, and without a base
We needed a way to hold our 8 scouting/strategy tablets that we use during events. This container holds them securely and still allows you to access them easily and charge them. OnShape Model:…
Case for a 7-inch eInk ePaper display. 640x384px. Any print settings. I used layer 0.2, nozzle 0.4, infill 15%, mounting holes for 2mm screws, 3-6mm long. hole for USB C socket 10mm
Microplate magnet shelf (ANSI SLAS standard 96, 384, etc.. wells or PCR plates) that can be placed in sterile laminar flow hood. Model contains thin cutouts inside the wall with magnets, it is made to force slicer make extra walls to…
3D printable upgrade parts to the AM14U series of drivetrains from AndyMark.com Simple printed parts to make the AM14U easier to work on. Printed Axle Holders are based on the AM nut holders but with 3/16" rivet holes Outer Wheel Spacers…
Since more and more things are powered through USB and I needed something small to fit into my race bag, I made this case for two HW-384 modules. Top case is ready for MM printing, simply split it to parts and print those small things…
Model for a pod for an integrated slingshot aluminum mast for foil assist.
54384 (wedge 3x6 left) Lego about 3 grams
The model is suitable for mounting a medium-sized system camera on the supplied column of an Asus ProArt PA384CGV monitor. The column has a diameter of approx. 50 mm. The same column is also used on other ProArt monitors. The adapter can…
This is an 384mm version of the original 149mm - Ventilation Cover. Outer dimeter (flange) is 408mm. It is sliced into six segments to fit on a Prusa MK4. It also comes with claps to hold the segments together. When assembled it should be…
My dad has a thermal monocular, and he asked if there was a way that I could print a helmet adapter. After a bit of work and a few prototypes, I finally landed on a model that I am happy with. This monocular fits a standard helmet mount,…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Onshape CAD link for those interested in making changes in the design: https://cad.onshape.com/documents/143c740f42cb21cc45906fdf/w/4bc4bac1614f8c690bb5c467/e/82f31ec3f743aeb42d9d5409 Changes, 19/5/26 - added file for old housing…
Note: I made an updated version of this pod that uses zip ties to secure it. There is much less play in it, I recommend using that new model: ____________________________________________________________________________________ This is a…
These are two models for clockwise and counterclockwise propellers to be used with a 2 blade hub of an 4.8" propeller.
**Updated model again - I updated the model so the mount is shorter (less swing weight), main change is I inverted the dove tail. * Updated mode l - The file title with "update" has a small change where I rounded off the leading edge of…
Shim to fit between new type Flipsky 6384 waterproof motor and foil drive propeller hub
AK Integrated Foil Drive Mast to Flipsky 6384 Motor Puck. STL and Step file included. Printed on Creality K1C with PTEG-cf. I adjusted size to get a super snug fit in the mast.
3 Blade Prop Hub for Flipsky or Generic 6384 Waterproof Motor. Using 3mm bolts for the blades. This has been updated June 2026 with some extra thickness around the bolt inserts to help prevent cracking. I print with 6 walls, 65% infill,…
