385 models
Enclosed version of my Gardena Gutter Adapter Water Collector with direct connection to a watering hose. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET
Design Description: Sink Drain Filter This design is a specially crafted sink drain filter aimed at enhancing the cleanliness and functionality of sink drains. Compared to traditional sink drains, it is more efficient and user-friendly.…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Ich habe einen schnellen Adapter konstruiert. Diese funktioniert gedruckt habe ich ihn aus 'PETG stützstrukturen sind keine nötig Aus PLA kann man ihn natürlich auch drucken. Aber PETG ist widerstandsfähiger
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
Part list spool winder: Conic plate (printed part / PETG) | quantity: 2 Threaded bar metric M10 | length: ≥100mm Hexagon nut (⎔17mm) | quantity: 4 Assembly instruction: Mount hexagon nut into each conic plate Turn hexagon nut to threaded…
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for PETGSource material: PET
Enclosed version of my Gardena Gutter Adapter Water Collector. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the adapter off when moved. Print slowly…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
I had a roll of sandpaper, I needed a drum sander. My design was inspired by Miklosicza's model https://www.printables.com/model/619813-sanding-drum-for-angle-grinder , but fits the sandpaper and hardware I have available. Note: FreeCAD…
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for PETGSource material: PET
My suction hose for pool cleaning was defective and I wanted to cut out the leaking piece. With the 38 to 38 mm adapter, I can reconnect the hose ends ;-) 4 Perimeter recommended, no supports needed.
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET
This is a MTB-bracket for your GoPro. Diameter 38mm. 2xM5 nut and M5x20mm screw is required.
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
I needed a "holey" lid to accomodate an air lock for my jars. After browsing various collections without finding what I needed I measured an existing glass lid, drew the profile in Fusion360 and rotated id around the centre hole. It's not…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Odbočka k okapovému svodu do sudu s přepadem. Pro okapový svod plastový ø 53mm vnější, ø 50mm vnitřní Pro okapový svod ALU Prefa ø 100mm (ø 98mm vnější průměr, plech 0,7mm) obojí s vývodem na hadici s vnitřním ø 38mm Víčko s vnitřním ø…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Windshield funnel made for my 2021 - model 3, wanted something way easier to pour into. the OD of the base of the shaft is 38mm and the funnel max diameter is 125mm I recommend printing in petg funnel down on the build plate with no…
Print approx. €5.32–€6.51 excl. taxPreliminary estimate for PETGSource material: PET
Warning: The current version of this belt broke after just a day and a half of use. The limiting factor appears to be tensile strength. To address, I'm considering polycarbonate filament and/or even thicker extrusions. Use the models that…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
This is a holder for small chemical bottles. I use them to have a quick access to Isopropanol and Aceton right on my 3D printer closet/workstation. The Holder fits bottles with a diameter of up to 38mm. Magnets, used in this version have…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
For 38mm high powered rocket motors the polycarbonate retainers can be difficult to install and remove if a minimum diameter tube or a boat tail is used. This key slips onto the retainer and provides tabs which can be used to install and…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of Kumiko Tea Light Lantern 3 . The walls and top were printed with a concentric pattern on the bottom and top layers to accentuate the design. The filament I used was Printlife Pro PLA Green. Most of the printing was done…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
Enjoy!! As you like use it!!
Print approx. €12.39–€15.14 excl. taxPreliminary estimate for one variant
A simple AirTag holder for a 34mm/35mm/36mm/38mm diameter MTB fork like Rockshox or Fox. If you have a very well calibrated or very true to size printer, the part fits perfectly - like my Prusa Mini :) My holder has not moved after quite…
Print in TPU for a soft padding around the watch.
When you buy an Intex pool, it's coming with a small pump and hoses, generally too small for the pool volume : you have to buy a bigger pump with sand filter, generally sold with only ONE hose adaptor. This thing allow you to print the…
This is a remix of a design on thingiverse by user justinsprecher (linked below). I remixed his dart cutting jig to cut 38mm long half darts instead of the original 36mm length his jig used. I really liked his design, but 38mm darts are…
A Pliers/Cutters holder for pegboards with Square 9mm holes and a center-center (CC) distance of 38mm. 6 Holes, each 15x15mm. I printed with a raft so the supports for the pegs would have something to print on.
I liked the model “Nerf Half Dart Cutter” by justinsprecher on thingiverse but actually printed the 2 Dart Version b Insurgent79 at the time. I felt like 5 Darts would be the perfect amount for the workflow of cutting darts though with a…
People might(not) have noticed that the Intex Deluxe skimmer has bayonet connection on the inside. I made a bayonet adapter to quickly connect a 32/38mm vacuum hose to it which makes switching inlet hoses a thing of the past.
This pipe holder for swimming pools is the perfect solution for keeping pipes in place and ensuring their stability. Designed for easy installation and use, it is compatible with most standard pool pipes. Features: Universal Design:…
Designed for the Zeb but should work on other 38mm forks. Confirmed for Fox. Works as good as any commercial tool. Prints without supports. Use high infill. UPDATE 9/2023 - By request, I thickened the tool's outer flange by 1mm. This is…
Use the .3mf files if possible, as the “union fitting nut G 1 1-2.3MF” contains a modifyer to have 100% infill in the critical section of the part. If you print from the stl, make sure the shoulder that holds the hose connector is printed…
Attachments for 10mm square hole, 38mm pitch pegboards Parametric Fusion 360 files available Files are also available on jrymk/pegboard-attachments: Attachments for 10mm square hole, 38mm pitch pegboards (github.com) but feel free to…
This fits around a 38mm or 1.5in roll cage or roll bar tube and holds a standard GoPro mount. It is designed .25mm small to allow for clamping force and has space for M4 hardware to fasten it. The standard GoPro mounting hardware will…
Some adapters for standard 38mm vacuum hose. All of them screw onto the hose itself, using the spral shape as thread.
Our pump has a higher GPH output than what came with the pool and I wanted to make the path a uniform cross-section throughout. Only major change was making the elbow outlet hole round and using a radiused, 90deg bend. Update: Had to…
Here you have number one of my tiny (scary) heroes, the crazy articulated skeleton. It is designed with the connection type i use for my ultra articulated snakes, dragons and lizards. That enabled to get the size down to 38mm in total,…
An alternative to expensive aluminum motor retainers and unsightly z-clips, this 38mm screw-on retainer is a great way to ensure your rocket motor is safely retained in the motor mount. Compatible with Aerotech, CTI, Loki, and most 38mm…
Honda changed the bottle design on their Manual Transmission Fluid (MTF) which meant I couldn't use my Slippery Pete 5cc fluid pump. See the last picture, the old bottle was a 28mm opening, now it's 38mm. **I printed rev001, but the male…
Adapter for Bosch GCM 8 SJL Mitre Saw to vacuum hose 37-38mm. Printed with 4 perimeters. No supports Infill 25%
Print settings are up to you, there are no special settings needed. They are designed to not require supports if you print with the long part of the body facing up. Print on a textured bed as that surface will be the front of the VF. Each…
To get a good circular flow in the round pool, it is helpful if the water flows into the pool sideways. With the angle insert this is possible without further modifications. Fits only for original Intex 38 mm inlet nozzles.…
A remix of the awesome Spanner / Wrench holder linked. I wanted to have my mounts printed to the model itself and not having to superglue parts together. Printed the model on a raft. I think you should be able to print it with supports…
This adapter adapts a 38mm 2-start PET bottle thread to a 38mm 3-start thread. This is often necessary because there are PET bottles with different threads and most models are designed for 38mm PET bottles with a 3-start thread. The model…
I remixed the 32mm version of this adapter to fit a 38mm hose so I can connect it to my pool vacuum. this should require minimal support under the inner circle. If you want to use default support make sure it is on build plate only or…
I really like @Adam's excellent tri-glide slide model. It's simple and prints quickly. I've widened the threaded version to fit a 1.5" (38mm) strap. UPDATE: @Adam has added a 1.5" width in both the threaded and non-threaded versions. I…
Design Overview This is a project to make use of a few of the many milk bottle tops that are otherwise discarded (the 38mm HDPE bottle type that are common in the UK, at least.) There are lots of other types of bottle cap that are…
This is a simple clamp which tidies any electrical cable which has to run alongside a 38mm (1.5") vac hose - perfect for CNC dust collection or any power tool with a vacuum port. I have a version for a 50mm hose <AT THIS LINK> I've…
INTEX 38 mm Pipe Fitting Gaskets must be added to ensure tightness.
Simple set of buckles. Sizes - 30mm & 38mm.
Pool Schlauchverbinder 38mm /Pool hose connector 38mm
This is an old design of mine, nothing fancy, simple but they work well. v1 might interfere with cases that fit under the printer. v2 has the same rail shape, but has a vertical inner wall to avoid colliding with cases that go under the…
TL;DR If you are in need of a 38mm motor retainer for your rocket, this might be a solution for you. It contains variations of centering rings and retainer options to hopefully suit your needs, or at least give you a head-start.…
Simple part designed to connect 38mm Festool Dust Extractor hose to M18 sander.
A hose adapter for a festool vacuum with a 35mm diameter. I wanted to connect my Makita mitre saw with 38mm diameter
Here is a jig for a 38mm pipe bend. This jig is made up of two part connected with two M5 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
Most race sanctioning bodies require clamps on the roll bar to keep the harness from sliding around. This fits around a 38mm or 1.5in roll cage tube to keep the belts in place. It is designed .25mm small to allow for clamping force and…
A set of various hooks for pegboards with 10 mm square holes spaced by 38mm, branded as Magnusson, Wolfcraft and other. As usual with my models, I made them editable by a spreadsheet in FreeCAD = you don't need paid software to edit them…
I've made a right angled exhaust pipe for the Creality K1 for use of a ID 38mm pipe for those wanting to vent their printer due to smells & VOC's The stock fan isn't that powerful so 38mm is still fine for air flow to remove some smell &…
The first pump holder I made for OneUp pumps. It's designed to wrap around a ~38mm downtube. Fits perfectly on my Cotic Solaris Max and may fit others as well. Needs a small O-ring for retention. Category: 3D Printing
Remix of https://www.printables.com/model/151972-dyson-v7-v8-v10-v11-v15-vacuum-bag-adapter from Adrian Dobre Our old ETA Biggs, has 38mm inner diameter, I wanted to use the same accessories, This model is 37,8mm so filing needed. Which I…
Für die Solaranlage, damit bei Pumpen-Stopp nicht das ganze Wasser aus den Solarmatten ausläuft. For the solar system, so that when the pump stops, all the water does not run out of the solar mats.
Držák kabelu na hadici vysavače 38mm. Jednoduchá výměna kabelu, stačí kabel vytáhnout. Pro kabel od 0,4-0,8mm. Je to pro většinu přístrojů připojovaných k vysavači. Vše mám odzkoušeno na několika vysavačích. Cable holder for vacuum…
A Shelf with drawers for pegboards with 9 mm Square holes and a CC distance of 38 mm. 4 Drawers in the Frame. Please cut the anti curling circles on the drawers after printing. The Frame I printed on a raft.
A simple strap loop (38mm), to be ideally printed in ABS or HIPS... Un simple boucle de sangle (38mm), à imprimer idéalement en ABS ou HIPS...
Hierbei handelt sich um einen Adapter zum einfachen Lösen und Befestigen von Wasserhähnen im Camper. Gerade die eingelassenen Varianten lassen es nur sehr schwer zu, die Kontermutter zu lösen. Nach einem Frostschaden war ein Tausch nur…
Update: 5/11/2024: I have upgraded the nosecone for this kit, found here . If you have a printer, that is capable of printing up to 290mm, then you may wish to give that one a try. There is nothing wrong with the nosecone within the kit.…
Requires the HSW open adapter No supports required. Drop of superglue will help hold it into adapter.
🇬🇧 English version Sand Screw – Beach Umbrella Anchor This Sand Screw is designed to securely hold a beach umbrella pole in the sand. The spiral shape allows the anchor to be screwed deep into the sand, providing better stability than…
This is a static cooling fan if you think the toolhead cooling is not powerful enough or wanting to reduce toolhead weight. This duct is made for Delta PFR1212DHE, but it should work on any standard 120x38mm fan. It can be mounted to 3030…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
Made smaller to save on filament and print time. Adjusted to 38mm to cut the long darts that come with the Adventure Force Dart Zone Nexus Pro down to match the shorties that come with it. Category: Toys & Games
Saugerdapter DN50/DN40 zu Staubsaugerschlauch innen 38mm Das Gewinde sitzt sehr fest und dichtet sauber ab Vacuum cleaner adapter DN50/DN40 for vacuum cleaner hose inside 38mm The thread is very tight and seals cleanly
Follow the print instructions and orientation for Ontos. Except for the back, center, ram and plunger head, everything else is the same as Ontos. Two obvious hardware changes: Plunger tube is 15cm 35 ID 38OD tube Use 30-35 orings or 123…
This model comes in 2 designs, with insert and without The design with insert means you'll need a 29mm or 1.145in phenolic or fiberglass insert to help insulate the print from the heat of the rocket motor. The phenolic tubing can be…
Since my tool/pegboard have 38x38mm grid pattern, I wanted to print a mounting bracket to fit my chargers there. I staggered the mounting tabs, so you can install the chargers as tight as possible side by side. Installation requires: 2pcs…
PETG and so many walls that the thing is solid ..and just send it.
This remix is meant to solve some print issues and allow even a smaller diameter candle to be used. Also, the bottom has some new features to host a smaller-diameter candle, the supports are now part of the body forming some empty gaps,…
Watch charger base for Huawei
38mm spool holder 2015 Flashforge PRO with slot Instructions first drawing in freecad Category: 3D Printer Accessories
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
3 Teiliger Zapfhahngriff aus PLA, gedruckt auf dem Ender 3 V2, Einzelteile mit Sekundenkleber zusammengeklebt, Mutter M10 Inlay mit Sekundenkleber eingeklebt, Passt auf Zapfanlage mit M10 Aufnahme
Print flat for optimal strength. The underside fillet might not print perfectly but it can be easily fixed in post. Pictured as used for hardware on a DIY packraft (1" version). For permanently sewn or welded-in fixtures that will be hard…
Halter 38mm Poolschlauch kurz
Update 26.12.2023: Added files for 15mm, 20mm, 25mm, 30mm and 35mm thickness top. This is a corner guard for desk or table with square corners and top thickness of 38mm. It protects the whole corner, because if you would apply separate…
I print PLA with a layer thickness of 0.2. No supports. Good works PETG.
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
My ladder lock broke on my backpack so I made a quick replacement on the same evening. Works like a charm and looks very much like the original. I challenged my friends to find the 3d-Printed part on my backpack and nobody found it in…
This is a static cooling fan if you think the toolhead cooling is not powerful enough or wanting to reduce toolhead weight. This duct is made for Delta PFR0912XHE, but it should work on any standard 90x38mm fan. It can be mounted to 3030…
Update (2025-01-26): Added new models for easier clamping. AT XXmm Casting Tube To Base Holder files are used to hold the casting tube to the base with fewer clamps. Take a look at the pictures to see how I use it. I use these to cast…
It's super simple. I originally designed a simple box with a lid for storing pencils, pens, and paintbrushes. https://www.printables.com/model/619803-simple-storage-box-with-lid-for-paintbrush-pen-pen I was looking for a small storage box…
A printable chest plate designed for GoPro-style action cameras and 38 mm straps. Tested in PETG (photos included). No supports required. Part of a full chest-mount system I’m releasing piece by piece. Free STL here — engineering STEP…
For assembly you will need 8 m4 20mm screw. Print “120mm Bracket.stl” two times. 60mm version here https://www.printables.com/model/803763-60mm-fan-jet-grill
At my local grocery store, they were giving away hundrets of smoothie bottles for free. So I took some home and designed this bird feeder for them. It works with Bottles that have a 38mm thread and the top part (to hang the bird feeder on…
My belt buckle snapped, and I was not ready yet to buy a completely new belt. As an axle I used a 3mm allen key, which was cut to size. Print in a strong material, like ASA/ABS. Set the seam position to Random to make sure the seam won't…
i created this mount for 38mm tweeter to mount them on the Golf 2 Dashboard so they dont jiggle around.
Designed for this abrasive: MIRKA ALOX Cotton Cloth on a Mini Roll - 38mm x 2,5m - CROP (nonpaints.com) Additional hardware: 2 x M4 heat-set inserts to the bottom of main body 2 x M4x20mm screws 2 x M4 washers (optional) Multi-Color…
I created a holder for the RTK station of Mammotion Luba for a 38mm pipe as I used a wall holder for SAT antennas for the RTK Station on my wall. Example: https://www.ebay.de/itm/385557813497 BOM 4x M4 Nuts 4x M4x30 FHSC (Senkkopf) 4x M6…
Dis ist eine kleine lötzinn spuhle Category: Electronics
This is a pipe holder for pools which are converted to Ф38mm pipes (like in the photo)
Print Settings Supports: No Resolution: 0,20mm - 0.30mm Infill: 15% Filament material: PETG Nozzle: 0.4mm
I liked the original model but i wanted to make a smaller one to reduce time and material used.
passage through the wall - inside 38mm, outside hose 32mm
![Nerf Half Length Dart Cutter [30, 36 & 38mm]](https://media.printables.com/media/prints/457744/images/3763999_e2c77853-c925-4696-8b94-84646396f999/img_20230420_224512.jpg)
